Effects of electron beam irradiation pretreatment on the structural and functional properties of okara protein

Improvement on gel properties of chicken myofibrillar protein with electron beam irradiation: Based on protein structure, gel quality, water state

This study aimed to investigate the effects of electron beam (E-beam) irradiation at different doses (0-15 kGy) on the solubility, rheological properties, emulsification characteristics, and moisture distribution of chicken myofibrillar proteins (MPs). Irradiation treatment notably increased the solubility, surface hydrophobicity, emulsification properties, and apparent viscosity of MPs, based on conformational changes caused by irradiation-induced oxidative denaturation of proteins. However, high doses of irradiation (15 kGy) induced in excessive cross-linking and aggregation of proteins, reducing the solubility, emulsification properties, and shear stress. Degradation of myosin heavy and light chains in irradiated MPs increased the content of β-turns and random coils. Additionally, the initial relaxation times of T21 and T22 in irradiated protein gels were reduced, and the peak value of P21 was increased, which improved the water-capturing ability of protein gels. Altogether, these results findings suggest that electron beam irradiation can be applied as a potential technique for modifying muscle proteins.

Effect of electron beam irradiation on glycosylation reaction and structural characterization of whey isolate protein

BACKGROUND

Whey protein isolate (WPI) is a high-quality animal protein resource. The modification of WPI through physical, chemical and biological methods can substantially improve the functional properties of proteins. This study investigated the effect of electron beam irradiation (EBI) on the modification of WPI-xylose glycosylation.

RESULTS

The degree of grafting and browning revealed that EBI promoted WPI glycosylation. The maximum emission wavelength of intrinsic fluorescence was red-shifted and the fluorescence intensity was reduced, suggesting that irradiation induced the unfolding of the WPI structure, thereby promoting glycosylation. Fourier-transformed infrared spectroscopy revealed that the covalent binding of the conjugates occurred on the introduction of the hydrophilic groups, resulting in decreased surface hydrophobicity. When compared with conventional wet-heat glycosylation, irradiation-assisted glycosylation improved the emulsifying activity of WPI from 179.76 ± 0.83 to 277.83 ± 1.44 m2 g-1, and the emulsifying and rheological properties improved.

CONCLUSION

These results confirmed that EBI can increase the degree of WPI glycosylation and improve the functional properties of proteins, thereby laying a theoretical foundation for the further application of WPI. © 2024 Society of Chemical Industry.

Irradiation-Assisted Enhancement of Foaming and Thermal Gelation Functionality of Liquid Egg White

Ionizing radiation has its unique popularity as a non-thermal decontamination technique treating with protein-rich foodstuffs to ensure the microbial and sensory quality, particularly for shell eggs. However, the changes in the functional properties of egg protein fractions such as liquid egg white (LEW) with macro/microstructural information are still controversial. Hence, this study was designed to elaborate the foaming and heat-set gelation functionality of LEW following different γ-ray irradiation dose treatments (0, 1, 3 or 5 kGy). For such, the physicochemical properties (active sulfhydryl and the hydrophobicity of protein moieties), structural characteristics (through X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry) and interfacial activities (rheological viscosity, interfacial tension, microrheological performance) were investigated. Then, the thermal gelation of LEW in relation to the texture profile and microstructure (by means of a scanning electron microscope) was evaluated followed by the swelling potency analysis of LEW gel in enzyme-free simulated gastric juice. The results indicated that irradiation significantly increased the hydrophobicity of liquid egg white proteins (LEWPs) (p < 0.05) by exposing non-polar groups and the interfacial rearrangement from a β-sheet to linear and smaller crystal structure, leading to an enhanced foaming capacity. Microstructural analysis revealed that the higher dose irradiation (up to 5 kGy) could promote the proteins' oxidation of LEW alongside protein aggregates formed in the amorphous region, which favored heat-set gelation. As evidenced in microrheology, ≤3 kGy irradiation provided an improved viscoelastic interface film of LEW during gelatinization. Particularly, the LEW gel treated with 1 kGy irradiation had evident swelling resistance during the times of acidification at pH 1.2. These results gave new insight into the irradiation-assisted enhancement of foaming and heat-set gelation properties of LEW.

Electron beam irradiation induced aggregation, structural and functional changes of soybean 11S globulin

This study investigated the effects of different irradiation doses of an electron beam (e-beam) (0, 2, 4, 6, 8, and 10 kGy) on the structure, emulsification, foaming, and rheological and gel properties of soybean 11S globulin. The irradiation treatment at 4 and 6 kGy significantly increased the solubility, surface hydrophobicity, disulfide bonding, and ζ-potential of 11S globulin, decreased the particle size of the protein solution, and effectively improved the emulsifying activity and foaming stability of the protein solution. Moreover, irradiation induced moderate cross-linking and aggregation of the proteins, thereby increasing the apparent viscosity and shear stress of the protein solution. In addition, the low-field NMR and microstructure analysis results revealed that protein gels formed a dense and homogeneous three-dimensional mesh structure after irradiation (6 kGy), along with increased content of bound water (T2b) and water not readily flowable (T21) and a decrease content of free water (T22). Overall, our results confirmed that e-beam irradiation could significantly improve the physicochemical properties of soybean 11S globulin. Our study thus provides a new technical means for the application of electron beam irradiation technology toward protein modification and broadens the high-value utilization of soybean 11S globulin in the food processing industry.

Effect of electron beam irradiation on the structural characteristics and functional properties of goat's milk casein

The effects of electron beam irradiation (EBI) at different doses (0, 2, 4, 6, 8, and 10 kGy) were investigated on the structural and functional properties of casein, including their interrelationship. A gradual reduction in the α-helix content of the secondary structure (as a stable structure) indicates that casein under EBI treatment mainly undergoes fragmentation and aggregation from a structural perspective. Furthermore, the hydrophobic group and tryptophan in the tertiary structure were exposed, which opened up the internal structure of the protein. In addition, a continuously increasing irradiation dose led to casein aggregation, as confirmed by electron microscopy. The structural changes affected its functional properties, such as solubility, emulsification, foaming, and rheological properties, all of which increased first and subsequently decreased. Finally, at irradiation doses of 4-6 kGy, casein was modified to exhibit optimal functional properties, which enhanced its food processing value and performance.

Effect of gamma-ray and electron-beam irradiation on the structural changes and functional properties of edible insect proteins from Protaetia brevitarsis larvae

Edible insects are regarded as future food sources to replace traditional livestock proteins. However, insect proteins have poor processing properties owing to various structural limitations. We investigated the structure of Protaetia brevitarsis larvae proteins modified by irradiation, and analyzed their resulting processing abilities. Following irradiation with gamma rays and electron beams, the ratio of parallel β-sheets to β-turns changed significantly, and changes in the tertiary protein structures were also confirmed. The polydispersity indices of the proteins remained relatively constant following irradiation, although the zeta potential and mean diameter changed. Furthermore, the pH, protein solubility, surface hydrophobicity, foaming capacity, and emulsion stability were higher than those of the control, whereas the viscosity and foaming stability were lower. Thus, gamma ray and electron beam irradiation clearly lead to changes in the structures of edible insect proteins and improves their processing properties, promoting the industrial utilization of such proteins in the food industry.

Electron Beam Irradiation Alters the Physicochemical Properties of Chickpea Proteins and the Peptidomic Profile of Its Digest

Irradiation can be used for the preservation of chickpea protein as it can destroy microorganisms, bacteria, virus, or insects that might be present. However, irradiation may provoke oxidative stress, and therefore modify the functionality and nutritional value of chickpea protein. In order to study the effects of irradiation on the physicochemical properties and digestion behaviour of chickpea protein, chickpea protein concentrate (CPC) was treated with electron beam irradiation (EBI) at doses of 5, 10, 15, and 20 kGy. After irradiation, protein solubility first increased at 10 kGy and 15 kGy, and then decreased at the higher dose of 20 kGy. This was supported by SDS-PAGE, where the intensity of major protein bands first increased and then decreased. Increased doses of EBI generally led to greater oxidative modification of proteins in CPC, indicated by reduced sulfhydryls and increased carbonyls. In addition, the protein structure was modified by EBI as shown by Fourier transform infrared spectroscopy analysis, where α-helix generally decreased, and β-sheet increased. Although the protein digestibility was not significantly affected by EBI, the peptidomic analysis of the digests revealed significant differences among CPC irradiated with varying doses. A total of 337 peptides were identified from CPC irradiated with 0 kGy, 10 kGy, and 20 kGy, with 18 overlapping peptides and 60, 29, and 40 peptides specific to the groups of 0, 10, and 20 kGy respectively. Theoretical calculation showed that the distribution of peptide length, hydrophobicity, net charge, and C-terminal residues were affected by irradiation. The 2, 2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging activity showed a marginal decrease with an increasing dose of irradiation. In conclusion, EBI led to oxidative modification and structural changes in chickpea protein, which subsequently affected the physicochemical properties of peptides obtained from in-vitro digestion of CPC, despite similar digestibility.

Effects of high-pressure homogenization on physicochemical and functional properties of enzymatic hydrolyzed soybean protein concentrate

This paper investigates the effect on the physicochemical and functional properties of soybean protein concentrate (SPC) by using Alcalase protease and high-pressure homogenization (HPH) (0, 20, 40, 60, 80, and 100 MPa) for the combined modification. The results showed that the degree of hydrolysis of SPC was 4.1% and the antigen protein was degraded after Alcalase hydrolysis, when the homogenization pressure (HP) was 6 0Mpa, the particle size of the SPC was the smallest, the zate potential absolute value up to 33.45 mV, the secondary structure has the lowest β-sheet content, the highest random coil content, and the highest surface hydrophobicity (H0), the size of protein fragments on the microstructure surface is the smallest, the lowest denaturation temperature (T d ) and enthalpy (△H) are 72.59°C and 1.35 J/g, the highest solubility is 80.54%, and the highest water and oil holding capacities are 7.73 g/g and 6.51 g/g, respectively. The best emulsifying activity and emulsifying stability were 43.46 m2/g and 190.35 min, the most even distribution of emulsion droplets. This indicates that the HPH treatment destroys the structure of enzymatic hydrolyzed SPC, changes its physicochemical properties, and improves its functional properties. In this study, SPC was modified by HPH and enzyme combined treatment, in order to improve the functionality and application range of SPC, and provide a theoretical basis for its high-value utilization in the food field.

Fabrication and Characterization of Chitosan-Pea Protein Isolate Nanoparticles

Chitosan (CS) and pea protein isolate (PPI) were used as raw materials to prepare nanoparticles. The structures and functional properties of the nanoparticles with three ratios (1:1, 1:2 1:3, CS:PPI) were evaluated. The particle sizes of chitosan-pea protein isolate (CS-PPI) nanoparticles with the ratios of 1:1, 1:2, and 1:3 were 802.95 ± 71.94, 807.10 ± 86.22, and 767.75 ± 110.10 nm, respectively, and there were no significant differences. Through the analysis of turbidity, endogenous fluorescence spectroscopy and Fourier transform infrared spectroscopy, the interaction between CS and PPI was mainly caused by electrostatic mutual attraction and hydrogen bonding. In terms of interface properties, the contact angles of nanoparticles with the ratio of 1:1, 1:2, and 1:3 were 119.2°, 112.3°, and 107.0°, respectively. The emulsifying activity (EAI) of the nanoparticles was related to the proportion of protein. The nanoparticle with the ratio of 1:1 had the highest potential and the best thermal stability. From the observation of their morphology by transmission electron microscopy, it could be seen that the nanoparticles with a ratio of 1:3 were the closest to spherical. This study provides a theoretical basis for the design of CS-PPI nanoparticles and their applications in promoting emulsion stabilization and the delivery of active substances using emulsions.