Studies of chitosan: II. Preparation and characterization of chitosan/poly(vinyl alcohol)/gelatin ternary blend films

A DNA-inspired injectable adhesive hydrogel with dual nitric oxide donors to promote angiogenesis for enhanced wound healing

Chronic diabetic wounds are a severe complication of diabetes, often leading to high treatment costs and high amputation rates. Numerous studies have revealed that nitric oxide (NO) therapy is a promising option because it favours wound revascularization. Here, base-paired injectable adhesive hydrogels (CAT) were prepared using adenine- and thymine-modified chitosan (CSA and CST). By further introducing S-nitrosoglutathione (GSNO) and binary l-arginine (bArg), we obtained a NO sustained-release hydrogel (CAT/bArg/GSON) that was more suitable for the treatment of chronic wounds. The results showed that the expression of HIF-1α and VEGF was upregulated in the CAT/bArg/GSON group, and improved blood vessel regeneration was observed, indicating an important role of NO. In addition, the research findings revealed that following treatment with the CAT/bArg/GSON hydrogel, the viability of Staphylococcus aureus and Escherichia coli decreased to 14 ± 2 % and 6 ± 1 %, respectively. Moreover, the wound microenvironment was improved, as evidenced by a 60 ± 1 % clearance of DPPH. In particular, histological examination and immunohistochemical staining results showed that wounds treated with CAT/bArg/GSNO exhibited denser neovascularization, faster epithelial tissue regeneration, and thicker collagen deposition. Overall, this study proposes an effective strategy to prepare injectable hydrogel dressings with dual NO donors. The functionality of CAT/bArg/GSON has been thoroughly demonstrated in research on chronic wound vascular regeneration, indicating that CAT/bArg/GSON could be a potential option for promoting chronic wound healing. STATEMENT OF SIGNIFICANCE: This article prepares a chitosan hydrogel utilizing the principle of complementary base pairing, which offers several advantages, including good adhesion, biocompatibility, and flow properties, making it a good material for wound dressings. Loaded GSNO and bArg can steadily release NO and l-arginine through the degradation of the gel. Then, the released l-arginine not only possesses antioxidant properties but can also continue to generate a small amount of NO under the action of NOS. This design achieves a sustained and stable supply of NO at the wound site, maximizing the angiogenesis-promoting and antibacterial effects of NO. More neovascularization and abundant collagen were observed in the regenerated tissues. This study provides an effective repair hydrogel material for diabetic wound.

Experimental investigations on PVA/chitosan and PVA/chitin films for active food packaging using Oxytenanthera abyssinica lignin nanoparticles and its UV-shielding, antimicrobial, and antiradical effects

This study investigated the effect of adding lignin nanoparticles (LNPs) derived from Oxytenanthera abyssinica via alkali-acid nanoprecipitation method to polyvinyl alcohol/chitosan (PVA/CI) and polyvinyl alcohol/chitin (PVA/CH) films for the active food packaging applications. Adding LNPs at concentrations of 1 % and 3 % improved the films' thermal stability and mechanical properties. The lowest water solubility and moisture content were observed in PVA/CI/LNPs films. LNPs exhibited effective 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activities, with the highest values observed in PVA/CH/LNPS and PVA/CI/LNPS films with values of 87.47 and 88.74 % respectively. The addition of LNPs also improved the UV-blocking abilities of the films. PVA/CH/LNP3 and PVA/CI/LNP3 have the smallest percentage transmission values of 3.34 % and 0.86 % in the UV range. The overall migration of dietary stimulants was lower in PVA/CI/LNPS and PVA/CH/LNPS films compared to PVA film. Antibacterial tests demonstrated the inhibitory capacity of the synthesized biofilms against both gram-positive and negative bacterial species, with the highest inhibitory value of 26 mm. The study suggests that PVA/CH/LNPS and PVA/CI/LNPS films have potential applications as active food packaging materials and can be explored in other potential applications such as drug delivery, tissue engineering, wound healing, and slow-release urea fertilizer development.

Influence of blending and layer-by-layer assembly methods on chitosan-gelatin composite films enriched with curcumin nanoemulsion

In this study, gelatin (GE) was composited with chitosan films (CH) and chitosan films incorporated with curcumin nanoemulsion (CH-CNE) through blending and layer-by-layer (LbL) assembly in order to overcome the physical limitations of the chitosan and its incorporated films. Furthermore, the distinctive effects of blending and LbL assembly on the physicochemical parameters of the composite films were assessed. The composite LbL films incorporated with GE exhibited improvement of water vapor barrier, tensile strength, solubility, which contributed to the enhanced antioxidant activity from the single components. By contrast, the composite films of the blending method exhibited greater elongation at break and increased swelling degree. Additionally, the films containing the nanoemulsion exhibited reduced light transmission and increased opacity. The thermal properties indicating the thermal stability and compatibility interactions of the composite films were examined by the glass transition temperature (Tg). Results revealed that the distinctive behavior of the Tg was affected by the compositing method. The LbL films exhibited substantially increased Tg, indicating enhanced thermal stability. The results indicated that the composited films formed via the LbL assembly attained better physicochemical properties and thermal stability, implying higher compatible film than the blending.

How APTMS Acts as a Bridge to Enhance the Compatibility of the Interface between the Hydrophilic Poly(vinyl alcohol) Film and the Hydrophobic Stearic Acid Coating

The hydrophobic modification of poly(vinyl alcohol) (PVA) film as a biodegradable packaging material has received significant attention in recent research. Despite the use of stearic acid (SA) as a coating for the PVA film, a challenge persists due to the poor compatibility between SA and PVA. This study addressed the aforementioned issue by utilizing (3-aminopropyl)trimethoxysilane (APTMS) as a bridging agent to establish a connection between the hydrophilic PVA film and the hydrophobic SA coating through hydrogen bonding and chemical reactions. First, SEM and EDS analyses confirmed the enhanced interfacial compatibility between the SA coating and the PVA film. Subsequently, the results from 1H NMR, FTIR, and XPS experiments presented evidence of hydrogen bonding and chemical reactions among APTMS, SA, and the PVA film. Interestingly, the PVA-APTMS-SA film demonstrated a contact angle of 120.77°, a water absorption of 7.81%, and a water vapor transmission rate of 8.69 g/m2/h. Furthermore, such a composite film displayed exceptional adhesion performance, requiring detachment stresses of 9.86 ± 0.91 and 6.17 ± 0.75 MPa when tested on glass and marble surfaces, respectively. In conclusion, the PVA-APTMS-SA film exhibited significant potential in extending the freshness of fresh-cut apples, making it a promising eco-friendly packaging material for food preservation.

Fabrication of CO-releasing surface to enhance the blood compatibility and endothelialization of TiO2 nanotubes on titanium surface

Although the construction of nanotube arrays with the micro-nano structures on the titanium surfaces has demonstrated a great promise in the field of blood-contacting materials and devices, the limited surface hemocompatibility and delayed endothelial healing should be further improved. Carbon monoxide (CO) gas signaling molecule within the physiological concentrations has excellent anticoagulation and the ability to promote endothelial growth, exhibiting the great potential for the blood-contact biomaterials, especially the cardiovascular devices. In this study, the regular titanium dioxide nanotube arrays were firstly prepared in situ on the titanium surface by anodic oxidation, followed by the immobilization of the complex of sodium alginate/carboxymethyl chitosan (SA/CS) on the self-assembled modified nanotube surface, the CO-releasing molecule (CORM-401) was finally grafted onto the surface to create a CO-releasing bioactive surface to enhance the biocompatibility. The results of scanning electron microscopy (SEM), X-ray energy dispersion spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) revealed that the CO-releasing molecules were successfully immobilized on the surface. The modified nanotube arrays not only exhibited excellent hydrophilicity but also could slowly release CO gas molecules, and the amount of CO release increased when cysteine was added. Furthermore, the nanotube array can promote albumin adsorption while inhibit fibrinogen adsorption to some extent, demonstrating its selective albumin adsorption; although this effect was somewhat reduced by the introduction of CORM-401, it can be significantly enhanced by the catalytic release of CO. The results of hemocompatibility and endothelial cell growth behaviors showed that, as compared with the CORM-401 modified sample, although the SA/CS-modified sample had better biocompatibility, in the case of cysteine-catalyzed CO release, the released CO could not only reduce the platelet adhesion and activation as well as hemolysis rate, but also promote endothelial cell adhesion and proliferation as well as vascular endothelial growth factor (VEGF) and nitric oxide (NO) expression. As a result, the research of the present study demonstrated that the releasing CO from TiO₂ nanotubes can simultaneously enhance the surface hemocompatibility and endothelialization, which could open a new route to enhance the biocompatibility of the blood-contacting materials and devices, such as the artificial heart valve and cardiovascular stents.

Mechanical, biocompatibility and antibacterial studies of gelatin/polyvinyl alcohol/silkfibre polymeric scaffold for bone tissue engineering

The current study focuses on the incorporation of natural polymers (gelatin, silk fibre) and synthetic (polyvinyl alcohol) polymer towards the fabrication of a novel composite for bone tissue engineering. The Electrospinning method was used to fabricate the novel gelatin/polyvinyl alcohol/silk fibre scaffold. XRD, FTIR and SEM-EDAX analysis was performed to characterize the composite. The characterized composite was investigated for its physical properties (porosity and mechanical studies) and biological studies (antimicrobial activity, hemocompatibility, bioactivity). The fabricated composite showed high porosity and the highest tensile strength of 34 MPa, with elongation at a break of 35.82 for the composite. The antimicrobial activity of the composite was studied and the zone of inhibition was measured around 51 ± 0.54 for E. coli, 48 ± 0.48 for S. aureus and 50 ± 0.26 for C. albicans. The hemolytic % was noted around 1.36 for the composite and the bioactivity assay revealed the formation of apatite on composite surfaces.

Controlled drug release contenders comprising starch/poly(allylamine hydrochloride) biodegradable composite films

The blending of natural polysaccharides with synthetic polymers has attracted much attention in drug delivery models owing to their remarkable biodegradable and biocompatible characteristics. This study focuses on the facile preparation of a sequence of composite films having Starch/Poly(allylamine hydrochloride) (ST/PAH) in different compositions to propose a novel drug delivery system (DDS). ST/PAH blend films were developed and characterized. FT-IR evaluation confirmed the involvement of intermolecular H-bonding between the ST and PAH counterparts in blended films. The water contact angle (WCA) ranged from 71° to 100° indicating that all the films were hydrophobic. TPH-1 (90 % ST and 10 % PAH) was evaluated for in vitro controlled drug release (CDR) at 37 ± 0.5 °C in a time-dependent fashion. CDR was recorded in phosphate buffer saline (PBS) and simulated gastric fluid (SGF). In the case of SGF (pH 1.2), the percentile drug release (DR) for TPH-1 was approximately 91 % in 110 min, while the maximum DR was 95 % in 80 min in PBS (pH 7.4) solution. Our results demonstrate that the fabricated biocompatible blend films can be a promising candidate for a sustained-release DDS for oral drug administration, tissue engineering, wound dressings, and other biomedical applications.

Fabrication and Characterization of Electrospun Waste Polyethylene Terephthalate Blended with Chitosan: A Potential Single-Use Material

Textile single-use products are dominantly used for hygiene and personal care, many of which are non-biodegradable and are frequently discarded into sewerage systems, thus causing blockages. Thus, there is a need to move towards water-soluble textiles. This research study focuses on transforming or repurposing biomass material and synthetic reusable waste plastic materials to improve waste. Chitosan (CS) nanofibers could be used in single-use nonwoven fabric or biodegradable tissues, as the water-soluble properties of chitosan nanofibers make them the perfect material for single-use applications. Furthermore, CS was blended with polyethylene terephthalate (PET) polymer and PET-based waste plastic (CS-WPET) to slow the CS nanofibers' water degradability and strengthen the durability of the nanofiber which could be used as air filters. The CS-TFA and CS-TFA/DCM nanofiber diameters were 95.58 ± 39.28 nm or 907.94 ± 290.18 nm, respectively, as measured from the HRSEM images. The CS-PET and CS-WPET hybrid nanofibers had fiber diameters of 246.13 ± 96.36 or 58.99 ± 20.40 nm, respectively. The thermal durability of the nanofibers was tested by TGA, which showed that CS-TFA/DCM nanofibers had sufficient thermal stability up to 150 °C, making them suitable for filter or fabric use at moderate temperatures. The blended nanofibers (CS-PET and CS-WPET) were thermally stable up to 160 °C. In the aqueous medium stability test, CS-PET and CS-WPET hybrid nanofibers had a slower degradation rate and were easily dissolved, while the CS nanofibers were rapidly and completely dissolved in an aqueous medium. Blending waste PET with CS allows it to be recycled into a useful single-use, non-woven textile, with greater water solubility than unmodified PET nanofibers but more durability than CS nanofibers on their own.

Antimicrobial Activity of Chitosan/Gelatin/Poly(vinyl alcohol) Ternary Blend Film Incorporated with Duchesnea indica Extract in Strawberry Applications

Chitosan (CTS)/gelatin (GEL)/poly(vinyl alcohol) (PVA)-based composite films with different concentrations of Duchesnea indica extract (DIE) (6.25 and 25 mg/mL), an antimicrobial agent, were manufactured using a casting technique. Results indicated that elongation at break decreased as DIE was added at higher concentrations. Composite films showed no significant differences in thickness, tensile strength, and water vapor permeability. Scanning electron microscopy images revealed that DIE was successfully incorporated into film matrices to interact with polymers. The addition of DIE to the film inhibited the growth of S. aureus by up to 4.9 log CFU/mL. The inhibitory effect on S. aureus using DIE-incorporated coating applied to strawberries was greatest at room temperature storage for 24 h only when it was coated twice or more. The maximum inhibition in strawberries was 2.5 log CFU/g when they were coated twice and 3.2 log CFU/g when they were coated three times. The results of this study suggest that DIE could be used as a natural antimicrobial agent, and DIE-integrated CTS/GEL/PVA films or coatings have potential as a food packaging alternative for preventing foodborne pathogen contamination.

Pt-Chitosan-TiO2 for Efficient Photocatalytic Hydrogen Evolution via Ligand-to-Metal Charge Transfer Mechanism under Visible Light

The Pt-chitosan-TiO2 charge transfer (CT) complex was synthesized via the sol-gel and impregnation method. The synthesized photocatalysts were thoroughly characterized, and their photocatalytic activity were evaluated toward H2 production through water reduction under visible-light irradiation. The effect of the preparation conditions of the photocatalysts (the degree of deacetylation of chitosan, addition amount of chitosan, and calcination temperature) on the photocatalytic activity was discussed. The optimal Pt-10%DD75-T200 showed a H2 generation rate of 280.4 μmol within 3 h. The remarkable visible-light photocatalytic activity of Pt-chitosan-TiO2 was due to the CT complex formation between chitosan and TiO2, which extended the visible-light absorption and induced the ligand-to-metal charge transfer (LMCT). The photocatalytic mechanism of Pt-chitosan-TiO2 was also investigated. This paper outlines a new and facile pathway for designing novel visible-light-driven photocatalysts that are based on TiO2 modified by polysaccharide biomass wastes that are widely found in nature.

Transparent and ultra-tough PVA/alkaline lignin films with UV shielding and antibacterial functions

Lignin and its derivatives can be used to make membranes with natural polymer materials for its properties including ultraviolet adsorption, biodegradable, antibacterial, and antioxidant. However, the lignin film has poor transparency due to the dark color, and how to control the proportion of each component to enhance properties is the main research topic. In this study, a polyvinyl alcohol /alkaline lignin (PVA/AL) composite film with excellent UV-shielding and visible-transparent performance successfully prepared by solution casting. By mixing with the N-halamine precursor 3-(2,3-dihydroxypropyl)-5,5-dimethylhydantoin (DPDMH), the composite film after chlorination showed superb antibacterial efficacy and could inactivate 6.85 log Escherichia coli (E. coli) and 6.57 log Staphylococcus aureus (S. aureus) respectively within 5 min of contact. Moreover, the composite film with 5 wt% AL exhibited ultra-high elongation of 449 % and toughness of 92 MJ/m³, and the toughness and malleability was greatly improved. In addition, with the introduction of AL, the composite film could shield 100 % of the UVB (320-275 nm) and UVC (275-200 nm) spectra and most of the UVA (400-320 nm) spectrum. The films prepared in this work are expected to find applications in promising fields such as in packaging materials and ultraviolet shielding.

Effect of polyvinyl alcohol and carboxymethylcellulose on the technological properties of fish gelatin films

The objective of this work was to develop biodegradable films by mixing gelatin/carboxymethylcellulose (FG/CMC) and gelatin/polyvinyl alcohol (FG/PVOH) and to evaluate the effect of adding these polymers on the properties of fish gelatin films. The films FG/CMC and FG/PVOH were produced in the proportions 90/10, 80/20 and 70/30 and characterized their physical, chemical and functional properties. The addition of CMC and PVOH improved the mechanical strength, barrier property and water solubility of gelatin films. FG/CMC films showed greater tensile strength and greater solubility than FG/PVOH. The maximum concentration of CMC promoted the highest mechanical resistance, while the highest PVOH content produced the film with the lowest solubility. The proposed mixing systems proved to be adequate to improve the properties of fish gelatin films, with potential for application in the packaging sector.

Development and evaluation of Moringa extract incorporated Chitosan/Guar gum/Poly (vinyl alcohol) active films for food packaging applications

The present study contributes the synthesis of active films with the incorporation of moringa extract (ME) into chitosan (CS)/guar gum (GG)/poly(vinyl alcohol) (PVA) matrix (CGPM) by simple solvent casting technique. The effect of ME on the mechanical, thermal, structural and morphological properties of CGPM active films were investigated. ME has shown a marked influence on the optical, thermal properties and swelling behaviour of CGPM active films. The improvement in the tensile strength of CGPM-1 active film (53.7 MPa) was observed compared to control CS/GG/PVA (CGP) film. DSC study revealed that glass transition temperature (Tg) and melting temperature (Tm) decreased with the addition of ME in the CGP matrix, which confirmed the miscibility among the components of active films. There was an improvement in the thermal stability of the CGPM active films. The FTIR study confirmed the molecular interaction between ME and CS/GG/PVA matrix. The XRD analysis showed a decrease in crystallinity with an increase in the ratio of CS for CGPM active films. The CGPM active films were an excellent barrier to UV- light and have exhibited a decrease in moisture adsorption and water solubility compared to CGP control film. The inclusion of ME in the CGP matrix leads to the formation of a dense compact surface, which in turn enhanced hydrophobicity of active films. The CGPM active films showed minimum WVP, OP values and overall migration values were within the limits of 10 mg/dm2. It was also observed that CGPM active films effectively inhibited the growth of E. coli and S. aureus bacteria. These findings suggest CGPM active films are biodegradable, biocompatible, non-toxic and hence can find application as food packaging materials.

2D Materials-Based Aptamer Biosensors: Present Status and Way Forward

Current advances in constructing functional nanomaterials and elegantly designed nanostructures have opened up new possibilities for the fabrication of viable field biosensors. Two-dimensional materials (2DMs) have fascinated much attention due to their chemical, optical, physicochemical, and electronic properties. They are ultrathin nanomaterials with unique properties such as high surface-to-volume ratio, surface charge, shape, high anisotropy, and adjustable chemical functionality. 2DMs such as graphene-based 2D materials, Silicate clays, layered double hydroxides (LDHs), MXenes, transition metal dichalcogenides (TMDs), and transition metal oxides (TMOs) offer intensified physicochemical and biological functionality and have proven to be very promising candidates for biological applications and technologies. 2DMs have a multivalent structure that can easily bind to single-stranded DNA/RNA (aptamers) through covalent, non-covalent, hydrogen bond, and π-stacking interactions, whereas aptamers have a small size, excellent chemical stability, and low immunogenicity with high affinity and specificity. This review discussed the potential of various 2D material-based aptasensor for diagnostic applications, e.g., protein detection, environmental monitoring, pathogens detection, etc.

3D sponges of chemically functionalized chitosan for potential environmental pollution remediation: biosorbents for anionic dye adsorption and 'antibiotic-free' antibacterial activity

In this work, it was developed three-dimensional (3D) porous hydrogel sponges produced by the freeze-dried process using chitosan polymer functionalized by 11-mercaptoundecanoic acid (MUA). These chitosan-based sponges were used as cationic adsorbents for the removal of anionic methyl orange (MO) dye, simulating a model organic pollutant in aqueous medium. Moreover, these porous 3D constructs were also evaluated as 'antibiotic-free' antibacterial materials against gram-negative and gram-positive bacteria, Pseudomonas aeruginosa and Staphylococcus aureus, respectively, which were used as model pathogens possibly found in contaminated hospital discharges. These 3D hydrogels were comprehensively characterized through morphological methods such as scanning electron microscopy and X-ray micro-computed tomography techniques, combined with FTIR, Raman, and UV-visible spectroscopy analyses. Additionally, the surface area, the degree of swelling, and the adsorption profiles and kinetics of these scaffolds were systematically investigated. The chemically thiolated chitosan (CHI-MUA) hydrogels were successfully produced with a supramolecular polymeric network based on hydrogen bonds, disulfide bonds, and hydrophobic interactions that resulted in higher stability in aqueous medium than hydrogels of pristine chitosan. CHI-MUA exhibited sponge-like three-dimensional structures, with highly interconnected and hierarchical pore size distribution with high porosity and surface area. These architectural aspects of the 3D sponges favoured the high adsorption capacity for MO dye (∼388 mg.g^-1) in water with removal efficiency greater than 90% for MO solutions (from 20 mg.L^-1-1200 mg.L^-1). The adsorption data followed a pseudo-second-order kinetic model and adsorption isotherm analysis and spectroscopy studies suggested a multilayer behaviour with coexistence of adsorbent-adsorbate and adsorbate-adsorbate interactions. Additionally, the in vitro evaluation of toxicity (MTT and LIVE-DEAD® assays) of 3D-sponges revealed a non-toxic response and preliminary suitability for bio-related applications. Importantly, the 3D-sponges composed of chitosan-thiolated derivative proved high antibacterial activity, specificity against P. aeruginosa (model hazardous pathogen), equivalent to conventional antibiotic drugs, while no lethality against S. aureus (reference commensal bacteria) was observed.

Chondroitin Sulfate/Polycaprolactone/Gelatin Electrospun Nanofibers with Antithrombogenicity and Enhanced Endothelial Cell Affinity as a Potential Scaffold for Blood Vessel Tissue Engineering

Electrospun polymer nanofibers have gained much attention in blood vessel tissue engineering. However, conventional nanofiber materials with the deficiencies of slow endothelialization and thrombosis are not effective in promoting blood vessel tissue repair and regeneration. Herein, biomimetic gelatin (Gt)/polycaprolactone (PCL) composite nanofibers incorporating a different amount of chondroitin sulfate (CS) were developed via electrospinning technology to investigate their effects on antithrombogenicity and endothelial cell affinity. Varying CS concentrations in PG nanofibers affects fiber morphology and diameter. The CS/Gt/PCL nanofibers have suitable porosity (~ 80%) and PBS solution absorption (up to 650%). The introduction of CS in Gt/PCL nanofibers greatly enhances their anticoagulant properties, prolongs their coagulation time, and facilitates cell responses. Particularly, 10%CS/Gt/PCL nanofibers display favorable cell attachment, elongation, and proliferation. Thus, the Gt/PCL nanofibers containing a certain amount of CS could be excellent candidates as a promising tissue-engineering scaffold in blood vessel repair and regeneration.

Polyoxometalate-Ionic Liquids (ILs) and Polyvinyl Alcohol/Chitosan/ILs Hydrogels for Inhibiting Bacteria Colonising Wall Paintings

Historical monuments are increasingly being threatened by unexpected microbial colonizers, leading to their subsequent deterioration. Here, two tetraalkylphosphonium polyoxometalate ionic liquids (Q14-IL and Q16-IL) were successfully synthesized, which showed excellent antibacterial activity against four bacteria colonising wall paintings. Notably, Q14-IL exhibited superior antibacterial efficacy compared to longer alkyl Q16-IL. Additionally, polyvinyl alcohol/chitosan (PVA-CS) hydrogels containing two ILs were prepared, and the morphology, thermal stability, swelling ratio and antibacterial activity were systematically evaluated. The results suggest that higher CS content resulted in more uniform micropores and increased the swelling ratio. However, fewer antibacterial ILs were released and diffused over time from the matrix. Hydrogels with 5% CS content exhibited the highest antibacterial activity, which was mainly attributed to the synergetic antibacterial activity of positively charged ammonium (-NH₃⁺) groups of CS and quaternary phosphonium cation of ILs. This study may provide an alternative strategy for fighting against bacterial communities colonising ancient artworks.

Hydroxy citric acid cross-linked chitosan/guar gum/poly(vinyl alcohol) active films for food packaging applications

The present work aims to prepare Chitosan (CS)/Guar gum (GG)/Poly(vinyl alcohol) (PVA) cross-linked with Hydroxy citric acid (HCA) (CGPH active film) by solvent casting technique. The influence of HCA on different CS/PVA ratio (1:3, 1:1, 3:1) in presence of the fixed amount of GG (0.2%) was investigated. The analysis of the results showed that the addition of HCA to the different ratio of CS/PVA increased the degradation temperature and improved the mechanical properties of CGPH active films. FTIR spectra and XRD analysis revealed strong interactions among the components of CGPH active films. The analysis of SEM images and water contact angle suggested a compact, dense film surface with hydrophobic nature. Further, all the active films have shown a decrease in water vapour permeability (WVP) and acted as a barrier to UV-light. CGPH active films effectively inhibited the growth of S. aureus and E. coli bacteria. With all these features the CGPH active films can find application in food packaging.

A Hydrogel Microneedle Patch for Point-of-Care Testing Based on Skin Interstitial Fluid

Skin interstitial fluid (ISF) holds great potential as a highly desirable sample resource for point-of-care testing (POCT), where the key is to effectively collect target biomarkers from ISF. Hydrogel microneedle patch has great promise for ISF extraction. However, it is challenging to recover target biomarkers from the extracted skin ISF in hydrogel microneedle patches in an easy-administrated, fast, and bulky instrument-free manner. Herein, a hydrogel microneedle patch made of polyvinyl alcohol (PVA) and chitosan (CS) for POCT based on the ISF is developed. The phase transition property of PVA/CS hydrogel makes the microneedles stiff when dry, which is beneficial to easily penetrate into skin. Meanwhile, the highly porous microstructure of hydrogel offers good swelling ability for extraction of ISF and the thermal degradation property of PVA makes it convenient to quickly and efficiently recover target biomarkers from microneedle patch. The capability of this platform for POCT applications is further demonstrated by successful detections of typical biomarkers collected from the mimetic skin and monitoring the glucose level in rabbit skins during a day. The developed hydrogel microneedle patch holds the advantages of extraction of skin ISF and recovery of biomarkers, thus presenting as a powerful platform for skin ISF-based POCT applications.

Carbonic Anhydrase@ZIF-8 Hydrogel Composite Membrane with Improved Recycling and Stability for Efficient CO2 Capture

In this study, carbonic anhydrase (CA, EC 4.2.1.1) molecules were embedded into metal-organic frameworks (MOFs) via co-precipitation (CA@ZIF-8), and then these CA@ZIF-8 nanocomposites were encapsulated in the poly(vinyl alcohol) (PVA)-chitosan (CS) hydrogel networks to prepare CA@ZIF-8-PVA-CS composite hydrogels (PVA/CS/CA@ZIF-8) with high activity, stability, and reusability. The immobilization efficiency of CA was greater than 70%, suggesting the high immobilization efficiency. The prepared PVA/CS/CA@ZIF-8 composite membranes displayed excellent higher stability against a high temperature, denaturants, and acid than free CA and CA@ZIF-8. Furthermore, these membranes exhibited an excellent performance for CO₂ capture. The amount of calcium carbonate obtained by PVA/CS/CA@ZIF-8 hydrogel membranes was 20- and 1.63-fold than free CA and CA@ZIF-8 composites, respectively. Furthermore, the hydrogel membranes exhibited superior reusability and mechanical strength. The hydrogel membrane maitained 50% of its original activity after 11 cycles. However, CA@ZIF-8 completely lost activity. These results indicated that the PVA/CS/CA@ZIF-8 membranes can be efficiently applied to capture CO₂ sequestration.

CO₂ Separation in Nanocomposite Membranes by the Addition of Amidine and Lactamide Functionalized POSS® Nanoparticles into a PVA Layer

In this article, we studied two different types of polyhedral oligomeric silsesquioxanes (POSS^®) functionalized nanoparticles as additives for nanocomposite membranes for CO₂ separation. One with amidine functionalization (Amidino POSS^®) and the second with amine and lactamide groups functionalization (Lactamide POSS^®). Composite membranes were produced by casting a polyvinyl alcohol (PVA) layer, containing either amidine or lactamide functionalized POSS^® nanoparticles, on a polysulfone (PSf) porous support. FTIR characterization shows a good compatibility between the nanoparticles and the polymer. Differential scanning calorimetry (DSC) and the dynamic mechanical analysis (DMA) show an increment of the crystalline regions. Both the degree of crystallinity (Xc) and the alpha star transition, associated with the slippage between crystallites, increase with the content of nanoparticles in the PVA selective layer. These crystalline regions were affected by the conformation of the polymer chains, decreasing the gas separation performance. Moreover, lactamide POSS^® shows a higher interaction with PVA, inducing lower values in the CO₂ flux. We have concluded that the interaction of the POSS^® nanoparticles increased the crystallinity of the composite membranes, thereby playing an important role in the gas separation performance. Moreover, these nanocomposite membranes did not show separation according to a facilitated transport mechanism as expected, based on their functionalized amino-groups, thus, solution-diffusion was the main mechanism responsible for the transport phenomena.