Characterization of acylated pepsin-solubilized collagen with better surface activity

Development of an In Situ Photo-Crosslinking Antimicrobial Collagen Hydrogel for the Treatment of Infected Wounds

Antimicrobial hydrogels have received considerable attention in the treatment of bacteria-infected wounds. Herein, we develop a neutral, soluble collagen via modification with maleic anhydride, serving as a hydrogel precursor. Maleic anhydride-modified collagen (ColME) could form a gel after exposure to UV light and be loaded with the antimicrobial agents, nisin and levofloxacin, to acquire antimicrobial ability. The ColME hydrogel containing nisin and levofloxacin had good cytocompatibility and effectively killed pathogenic bacterial strains, such as Escherichia coli and Staphylococcus aureus. The antimicrobial ColME hydrogels effectively supported the healing of a full-thickness skin wound infected with S. aureus in a mouse model. Our results demonstrate the potential of antimicrobial hydrogels as effective wound dressings via in situ photogelation for the healing of infected wounds.

Investigation of the effects of bovine collagen peptides and mixed berries on rheological properties and biological activity of egg white-based beverage via central composite design

Modern consumer expectations have become highly diversified: they want more opportunities to meet diverse family needs (diversity of family members in age, gender, physical activity, etc. ,) and individual health goals with a huge variety of sensorial preferences. Our research is aimed to develop a protein-dense, highly bioactive, lactose- and whey protein-free beverage applying a central composite rotational design (CCRD) with 2 factors. For this purpose, an egg white-based beverage was flavored with mixed berries (factor A) and enriched with bovine collagen peptides (factor B). After suitable sample preparation, the rheological properties were investigated by an Anton Paar MCR 92 rheometer (with CC 27 system, and flow behavior was analyzed with a Herschel-Bulkley (H-B) model). The antioxidant capacity of samples was investigated by Ferric Reducing Antioxidant Power (FRAP) method, the total anthocyanin content was estimated based on a spectrophotometric method, and the total phenolic content was determined by the Folin Ciocalteu method. Our results are figured on response surfaces demonstrating that both factors and their interactions show a positive correlation with the examined parameters. Based on the CCRD, all investigated parameters are significantly influenced by at least one aspect and can be adequately estimated for further product development.

Mimicking the Hierarchical Organization of Natural Collagen: Toward the Development of Ideal Scaffolding Material for Tissue Regeneration

Biological materials found in living organisms, many of which are proteins, feature a complex hierarchical organization. Type I collagen, a fibrous structural protein ubiquitous in the mammalian body, provides a striking example of such a hierarchical material, with peculiar architectural features ranging from the amino acid sequence at the nanoscale (primary structure) up to the assembly of fibrils (quaternary structure) and fibers, with lengths of the order of microns. Collagen plays a dominant role in maintaining the biological and structural integrity of various tissues and organs, such as bone, skin, tendons, blood vessels, and cartilage. Thus, "artificial" collagen-based fibrous assemblies, endowed with appropriate structural properties, represent ideal substrates for the development of devices for tissue engineering applications. In recent years, with the ultimate goal of developing three-dimensional scaffolds with optimal bioactivity able to promote both regeneration and functional recovery of a damaged tissue, numerous studies focused on the capability to finely modulate the scaffold architecture at the microscale and the nanoscale in order to closely mimic the hierarchical features of the extracellular matrix and, in particular, the natural patterning of collagen. All of these studies clearly show that the accurate characterization of the collagen structure at the submolecular and supramolecular levels is pivotal to the understanding of the relationships between the nanostructural/microstructural properties of the fabricated scaffold and its macroscopic performance. Several studies also demonstrate that the selected processing, including any crosslinking and/or sterilization treatments, can strongly affect the architecture of collagen at various length scales. The aim of this review is to highlight the most recent findings on the development of collagen-based scaffolds with optimized properties for tissue engineering. The optimization of the scaffolds is particularly related to the modulation of the collagen architecture, which, in turn, impacts on the achieved bioactivity.

Fibrillogenesis of acrylic acid-grafted-collagen without self-assembly property inspired by the hybrid fibrils of xenogeneic collagen

Along with advancements in both protein and chemistry science, the chemical modification of proteins is attracting more and more attention. More specifically, the attachment of polymers or reactive moieties into collagen offers a method to add novel functions to this protein. However, the fibrillogenesis of the modified collagen with high grafting density cannot always be achieved. Here, inspired by the hybrid fibrils of xenogeneic collagen, fibrillogenesis of acrylic acid-grafted-collagen (AAc-g-Col) without self-assembly property was achieved by the induction of natural collagen (Col). The step-by-step co-assembly process of AAc-g-Col and Col was confirmed by turbidity assay. The formation of Col/AAc-g-Col hybrid fibrils was verified by TEM since the acryloyl groups of the hybrid fibrils were labelled using HS-AuNPs based on the Michael addition. Moreover, rheology, SEM, and MTT assays revealed that the fibrillary structures and biocompatibility of the Col/AAc-g-Col hydrogel were comparable to that of the Col hydrogel, although they presented a lower viscoelasticity.

Regeneration of native collagen from hazardous waste: chrome-tanned leather shavings by acid method

The collagens (COL2, COL4, and COL5) were extracted from chrome-tanned leather shavings via three distinctive routes of acid method. The dechroming degree of COL2 extracted with the easiest operation was the highest (95.6% ± 1.2%) and the yield exceeded 90%; however, the total amount of acid was the most and the cost was the highest. In the second route, although the three-step dechroming process brought cumbersome operation, the dechroming degree and yield of COL4 were 90.5% ± 0.8% and 92.2% ± 0.6%, respectively, and the acid amount was less than that in the first route. For COL5, the dechroming degree and yield was the lowest; nevertheless, this route had the advantages of lowest cost and simpler operation. Electrophoretic patterns showed that all the collagens contained α1, α2, and β chains without low molecular weight components and were close to those of type I collagen. Compared with native collagen extracted from fresh calf skin, the regenerated collagens also maintained unique triple helix conformation determined via ultraviolet, infrared spectra and X-ray diffraction, confirmed by the similar values of AIII/A1455 and Δν. Additionally, the collagens existed in the form of fibrils with D-period pattern of ~ 67 nm. Furthermore, the denaturation temperatures of COL2, COL4, and COL5 were 71.2, 79.1, and 85.4 °C, respectively, which were relevant to the tighter arrangement of fibrils with the increased chromium content.

Factors affecting thermal stability of collagen from the aspects of extraction, processing and modification

Abstract

Collagen, as a thermal-sensitive protein, is the most abundant structural protein in animals. Native collagen has been widely applied in various fields due to its specific physicochemical and biological properties. The beneficial properties would disappear with the collapse of the unique triple helical structure during heating. Understanding thermal stability of collagen is of great significance for practical applications. Previous studies have shown the thermal stability would be affected by the different sources, extraction methods, solvent systems in vitro and modified methods. Accordingly, the factors affecting thermal stability of collagen are discussed in detail in this review.

Graphical abstract

The negatively charged microenvironment of collagen hydrogels regulates the chondrogenic differentiation of bone marrow mesenchymal stem cells in vitro and in vivo

The differentiation of bone marrow mesenchymal stem cells (BMSCs) into functional chondrocytes is crucial for successful cartilage tissue engineering. Since the extracellular matrix (ECM) microenvironment can regulate the behaviours of BMSCs and guide their differentiation, it is important to simulate the natural cartilage ECM to induce the chondrogenesis of BMSCs. As the most abundant protein in the ECM, collagen hydrogels were found to provide a structural and chemical microenvironment for natural cartilage, and regulate the chondrogenic differentiation of BMSCs. However, as the negatively charged ECM microenvironment is crucial for chondrogenesis and homeostasis within cells in cartilage tissue, the electrical properties of collagen hydrogels need to be further optimized. In this study, three collagen hydrogels with different electrical properties were fabricated using methacrylic anhydride (MA) and succinic anhydride (SA) modification. The collagen hydrogels had a similar composition, storage modulus and integral triple helix structure of collagen, but their different negatively charged microenvironments significantly impacted the hydrophilicity, protein diffusion and binding, and consequently influenced BMSC adhesion and spreading on the surface of the hydrogels. Moreover, the BMSCs encapsulated in the collagen hydrogels also demonstrated improved sGAG secretion and chondrogenic and integrin gene expression with the increased negative charge in vitro. Similar results were also observed in subcutaneous implantation in vivo, where higher secretions of sGAG, SOX9 and collagen type II proteins were found in the collagen hydrogels with higher negative charge. Together, our results demonstrated that more negative charges introduced into the collagen hydrogel microenvironment would enhance the chondrogenic differentiation of BMSCs in vitro and in vivo. This revealed that the electrical properties are an important consideration in designing future collagen hydrogels for cartilage regeneration.

Aggregation Behavior of Acylated Pepsin-Solubilized Collagen Based on Fluorescence Spectrum Technology

The aggregation behavior of collagen-based materials plays an important role in their processing because it could affect their physicochemical properties. Based on the intrinsic fluorescence characteristic of tyrosine, fluorescence spectrum technology was used to investigate the aggregation state of the acylated collagen molecules in aqueous solution. The results showed that the aggregate degree of the acylated collagen was higher than that of the native collagen due to the hydrophobic interaction. With the increase of concentrations of the acylated collagen or at NaCl higher than 40 mmol/L, the aggregate degree of the acylated collagen molecules increased. When the pH was close to the isoelectric point of the acylated collagen, the hydrophobic interaction and the hydrogen bond helped to increase the aggregation degree. However, with the increase of temperature (10-70 ℃), the aggregation state of the acylated collagen decreased gradually due to the quenching, the molecular collision, and the broken of hydrogen bonds. Furthermore, two-dimensional correlation spectroscopy (2D-COS) showed that the response order was 360 > 305 nm at various acylated collagen and NaCl (>40 mmol/L) concentrations, while the response order was 305 > 360 nm when the pH value was increased from 5.0 to 9.0. Temperature-dependent 2D-COS showed there were four bands that occurred and the response order was listed as follows: 293 > 305 > 360 > 420 nm. In brief, the results might provide an important guide for molding processes of the acylated collagen.

Collagen extraction from mussel byssus: a new marine collagen source with physicochemical properties of industrial interest

Mussel byssus is a by-product of mussel production and is a potential source of collagen. The goal of this study was to extract collagen from the byssus of Chilean mussel using an enzymatic method and characterize it. A pepsin-aided extraction method was employed where first an enzymatic hydrolysis at two pepsin/substrate ratios (1:50 or 4:50) and times (4 or 24 h) was done. Extraction was conducted at 80 °C for 24 h, in a 0.5 N acetic acid solution. All samples were analyzed for collagen content, amino acid profile, turbidity, viscosity, solubility, denaturation temperature and surface tension. Hydrolysis time had significant effect on collagen content, hydroxyproline content and extraction yield. Hydrolysis with a pepsin/byssus ratio of 4:50 for 24 h gave the better extraction performance with values of 69 mg/g protein, 1.8 mg/g protein and 30%, for collagen content, hydroxyproline content and extraction yield, respectively. No differences were found for the viscosity and surface tension of collagen dispersions, suggesting that the enzymatic hydrolysis did not affect the integrity of the collagen molecule. Denaturation temperature of freeze-dried byssus collagen presented a high value (83-91 °C), making this kind of collagen a very interesting material for encapsulation of bioactive molecules and for biomedical applications.

Effect of surfactants on surface activity and rheological properties of type I collagen at air/water interface

We describe the effect of three synthetic surfactants (anionic - sodium dodecyl sulfate (SDS), cationic - cetyltrimethylammonium bromide (CTAB) and nonionic - Triton X-100 (TX-100)) on surface properties of the type I calf skin collagen at the air/water interface in acidic solutions (pH 1.8). The protein concentration was fixed at 5×10^-6molL^-1 and the surfactant concentration was varied in the range 5×10^-6molL^-1-1×10^-4molL^-1, producing the protein/surfactant mixtures with molar ratios of 1:1, 1:2, 1:5, 1:10 and 1:20. An Axisymmetric Drop Shape Analysis (ADSA) method was used to determine the dynamic surface tension and surface dilatational moduli of the mixed adsorption layers. Two spectroscopic techniques: UV-vis spectroscopy and fluorimetry allowed us to determine the effect of the surfactants on the protein structure. The thermodynamic characteristic of the mixtures was studied using isothermal titration calorimetry (ITC) and differential scanning calorimetry (DSC). Modification of the collagen structure by SDS at low surfactant/protein ratios has a positive effect on the mixture's surface activity with only minor deterioration of the rheological properties of the adsorbed layers. The collagen/CTAB mixtures do not show that pronounced improvement in surface activity, while rheological properties are significantly deteriorated. The mixtures with non-ionic TX-100 do not show any synergistic effects in surface activity.

Influence of collagen concentration and glutaraldehyde on collagen-based scaffold properties

Several studies have shown the influence of the physical properties of scaffolds on their mechanical properties. An initial characterization of a type of collagen protein was carried out by studying its composition andits solubility at different pH values and infrared spectroscopy. Subsequently, porosity and scaffold pore size were studied, assessing how varying the composition of the initial solution (increasing the protein concentration or adding glutaraldehyde) changed the properties of the final scaffolds obtained. Lastly, rheological measurements were performed to evaluate the mechanical strength of the scaffolds. The initial characterization revealed that the type I collagen protein used is considerably denatured. In addition, increasing the protein content in the scaffold decreases the porosity, related to an increase in the elastic modulus producing an enhancement of its mechanical strength, while adding glutaraldehyde to the scaffold increases its mechanical strength without lowering its pore size or porosity. The results obtained are useful in that they demonstrate that it is possible to design a scaffold with specific properties, by just controlling the collagen concentration or adding glutaraldehyde to the initial solution. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1462-1468, 2016.

Two-dimensional infrared spectroscopic study on the thermally induced structural changes of glutaraldehyde-crosslinked collagen

The thermal stability of collagen solution (5 mg/mL) crosslinked by glutaraldehyde (GTA) [GTA/collagen (w/w)=0.5] was measured by differential scanning calorimetry and Fourier transform infrared spectroscopy (FTIR), and the thermally induced structural changes were analyzed using two-dimensional (2D) correlation spectra. The denaturation temperature (Td) and enthalpy change (ΔH) of crosslinked collagen were respectively about 27°C and 88 J/g higher than those of native collagen, illuminating the thermal stability increased. With the increase of temperature, the red-shift of absorption bands and the decreased AIII/A1455 value obtained from FTIR spectra indicated that hydrogen bonds were weakened and the unwinding of triple helix occurred for both native and crosslinked collagens; whereas the less changes in red-shifting and AIII/A1455 values for crosslinked collagen also confirmed the increase in thermal stability. Additionally, the 2D correlation analysis provided information about the thermally induced structural changes. In the 2D synchronous spectra, the intensities of auto-peaks at 1655 and 1555 cm(-1), respectively assigned to amide I band (CO stretching vibration) and amide II band (combination of NH bending and CN stretching vibrations) in helical conformation were weaker for crosslinked collagen than those for native collagen, indicating that the helical structure of crosslinked collagen was less sensitive to temperature. Moreover, the sequence of the band intensity variations showed that the band at 1555 cm(-1) moved backwards owing to the addition of GTA, demonstrating that the response of helical structure of crosslinked collagen to the increased temperature lagged. It was speculated that the stabilization of collagen by GTA was due to the reinforcement of triple helical structure.