Synthesis and applications of poly(2-hydroxyethylmethacrylate) grafted agar: A microwave based approach

Design and development of pH-responsive alginate-based nanogel carriers for etoposide delivery

Recently, pH-responsive nanogels are playing progressively important roles in cancer treatment. The present study focuses on designing and developing pH-responsive alginate-based nanogels to achieve a controlled release of etoposide (Et) while enhancing its hydrophilicity. Alginate (ALG) is grafted with 2-hydroxypropyl methacrylamide (HPMA) through a microwave-supported method, and the chemical structure of the graft copolymer (ALG-g-PHPMA) was verified by 1H/13C NMR and FTIR techniques. The ALG-g-PHPMA and anticancer drug-loaded ALG-g-PHPMA@Et nanogels were obtained using an emulsion method, and their structures were characterized through FTIR, TG/DSC, AFM/TEM, BET, and DLS analyses. The ALG-g-PHPMA nanogels demonstrated a good drug encapsulation efficiency (79.60 %), displaying a pH-dependent release profile and an in vitro accelerated release of Et compared to the ALG nanogels. Thermal and BET analyses revealed enhanced stability, surface area, and porosity volume of the alginate nanogels. The grafting of PHPMA chains onto alginate altered the surface topology of the ALG nanogels, resulting in lower surface roughness. Furthermore, cytotoxicity tests showed the high biocompatibility of the ALG-g-PHPMA copolymer and its nanogels. The ALG-g-PHPMA@Et nanogels exhibited a higher anticancer effect on lung cancer (H1299) cells than free etoposide. These results suggest that the ALG-g-PHPMA nanogels can be applied as a pH-dependent nanoplatform for delivering anticancer drugs.

Synthesis, characterization, antibacterial and emulsifying properties of agar benzoate

Agar benzoate (AB) with different degrees of substitution (DS) was synthesized by the esterification of agar and benzoic anhydride in aqueous solution. The DS could be regulated by adjusting composition ratio, pH, and temperature. Its chemical structure was determined by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR). ¹³C NMR spectrum of the AB suggested the main substitution occurred at the C-6 in the d-galactopyranose. Cryo-scanning electron microscopy (Cryo-SEM) showed that the aperture of AB was larger than that of agar. The thermal performance of AB decreased slightly, but this did not affect its performance. AB showed the highest relative antibacterial activity against Escherichia coli, S. aureus and Alternaria alternata, reaching 100 % (AB 20 g/L), 100 % (AB 40 g/L) and 19.35 % (7 d incubation), respectively. Moreover, the obtained AB possessed good emulsion stability. These antibacterial AB have broad application prospects in the field of fruit and vegetable preservation.

Chemical modification of κ-carrageenan with poly(2-hydroxypropylmethacrylamide) through microwave induced graft copolymerization: Characterization and swelling features

In the last decade, interest in the development of new graft copolymers based on natural polysaccharides has grown remarkably due to their potential applications in the wastewater treatment, biomedical, nanomedicine, and pharmaceutical fields. Herein, a novel graft copolymer of κ-carrageenan with poly(2-hydroxypropylmethacrylamide) (κ-Crg-g-PHPMA) was synthesized using a 'microwave induced' technique. The synthesized novel graft copolymer has been well characterized in terms of FTIR, ¹³C NMR, molecular weight determination, TG, DSC, XRD, SEM, and elemental analyses, taking κ-carrageenan as a reference. The graft copolymers' swelling characteristics were investigated at pH 1.2 and 7.4. The results of swelling studies displayed that the incorporation of PHPMA groups on κ-Crg provides increasing hydrophilicity. The effect of PHPMA percentage in the graft copolymers and pH of the medium on the swelling percentage was studied and the findings exhibited that swelling ability increased with the increment in PHPMA percentage and pH of the medium. The best swelling percentage was attained at pH = 7.4 and a grafting percentage of 81 % reaching 1007 % at the end of 240 min. Moreover, cytotoxicity of the synthesized κ-Crg-g-PHPMA copolymer was assessed on the L929 fibroblast cell line and obtained to be non-toxic.

Chemical modifications in the structure of marine polysaccharide as serviceable food processing and preservation assistant: A review

Marine polysaccharides are a kind of natural polysaccharides which isolated and extracted from marine organisms. Now some marine polysaccharides, such as chitosan, sodium alginate and agar, have been proven to exhibit antibacterial, antioxidant functions and biocompatibility, which are often used to preserve food or improve the physicochemical properties of food. However, they still have the defects of unsatisfactory preservation effect and biological activity, which can be remedied by its modification. Chemical modification is the most effective of all modification methods. The advances in common chemical modification methods of chitosan, sodium alginate, agar and other marine polysaccharides and research progress of modified products in food processing and preservation were summarized, and the influence of additional reaction conditions on the existence of chemical modification sites of polysaccharides was discussed. The modification of functional groups in natural marine polysaccharides leads to the change of molecular structure, which can improve the physical, chemical and biological properties of marine polysaccharides. Chemically modified products have been used in various fields of food applications, such as food preservatives, food additives, food packaging, and food processing aids. In general, chemical modification has excellent potential for food processing and preservation, which can improve the function of marine polysaccharides.

Microwave assisted synthesis of guar gum based biopolymeric macromolecule optimized as a flocculant for mineral ore processing

The research endeavour to synthesize a novel, non-toxic, eco-friendly guar gum based biopolymeric macromolecule, [2-(methacryloyloxy) ethyl] trimethyl ammonium chloride grafted guar gum (GG-g-P (MAETMAC)) that has been optimized as a flocculant for mineral ore processing. The synthesis was performed using non-radiation and microwave assisted technique to compare and ensure the superiority of the latter. The intended grafting of monomer[2-(methacryloyloxy) ethyl] trimethyl ammonium chloride on to the biological macromolecule (guar gum) was confirmed through standard physico-chemical characterization techniques namely X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-visible) spectroscopy, intrinsic viscosity study, etc. The flocculation efficacy of the synthesized novel graft copolymer was thoroughly investigated in kaolin, coal fine, and iron ore suspensions. We have explored a graft copolymer, [2-(methacryloyloxy) ethyl] trimethyl ammonium chloride grafted guar gum that has not been studied yet to the best of our knowledge. To establish the superiority of the synthesized biomaterial, the flocculation study revealed that the best grade of the synthesized novel graft copolymer showed flocculation efficacy of 90 % in kaolin, 69 % in Iron ore, and 29 % in coal fine suspensions which was significantly higher than using alum as a coagulant which provided 36 % efficacy in kaolin, 29 % in iron ore and 10 % in coal fine suspensions.

Implications of agar and agarase in industrial applications of sustainable marine biomass

Agar, a major component of the cell wall of red algae, is an interesting heteropolysaccharide containing an unusual sugar, 3,6-anhydro-L-galactose. It is widely used as a valuable material in various industrial and experimental applications due to its characteristic gelling and stabilizing properties. Agar-derived oligosaccharides or mono-sugars produced by various agarases have become a promising subject for research owing to their unique biological activities, including anti-obesity, anti-diabetic, immunomodulatory, anti-tumor, antioxidant, skin-whitening, skin-moisturizing, anti-fatigue, and anti-cariogenic activities. Agar is also considered as an alternative sustainable source of biomass for chemical feedstock and biofuel production to substitute for the fossil resource. In this review, we summarize various biochemically characterized agarases, which are useful for industrial applications, such as neoagarooligosaccharide or agarooligosaccharide production and saccharification of agar. Additionally, we succinctly discuss various recent studies that have been conducted to investigate the versatile biological activities of agar-derived saccharides and biofuel production from agar biomass. This review provides a basic framework for understanding the importance of agarases and agar-derived saccharides with broad applications in pharmaceutical, cosmetic, food, and bioenergy industries.

Preparation and Characterization of Superabsorbent Polymers Based on Sawdust

Sawdust, a cheap by-product of the timber and forestry industry, was considered as a framework structure to prepare superabsorbent polymer with acrylic acid (AA) and acrylamide (AM), the synthetic monomers. The effects of initiator content, crosslinker content, AA content, AM content, degree of neutralization of AA, and reaction temperature on the swelling rate of superabsorbent polymer were investigated. The synthesized polymer was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). Under optimal synthesis conditions, the results showed that the swelling rate of the polymer in deionized water and 0.9% NaCl solution reached 738.12 and 90.18 g/g, respectively. The polymer exhibits excellent swelling ability, thermal stability, and reusability. After the polymer was introduced into the samples (soil or coal), the water evaporation rate of the samples was significantly reduced, and the saturated water holding capacity and pore structure were also significantly improved.

Synthesis, properties and performance of organic polymers employed in flocculation applications

Recent developments on the synthesis and flocculation efficiency of several non-ionic, cationic, anionic and amphoteric polymers are presented and summarised.

Microwave assisted preparation of n-butylacrylate grafted chitosan and its application for Cr(VI) adsorption

Biopolymers such as chitosan possess excellent properties suited for varied applications. In this work, we describe a novel microwave assisted method for the preparation of n-butylacrylate grafted chitosan adsorbent and its utility for the adsorption of chromium(VI). A 3 min irradiation time was enough to prepare the adsorbent, and techniques such as FT-IR, powder XRD, SEM and EDS were used for comprehensive characterization. The adsorption was effective at pH 3.5 with 25 mL of 20 ppm Cr(VI) solution. Langmuir, Freundlich, Dubinin-Radushkevich, Temkin, Elovich and Redlich isotherms were studied in detail. The ΔG, ΔH and ΔS parameters were evaluated to understand the adsorption thermodynamics. The adsorption involves the interaction of Cr(VI) with the hydroxyl and amino groups in chitosan.