Dissolution and regeneration of hide powder/cellulose composite in Gemini imidazolium ionic liquid

Cellulose dissolution and regeneration behavior via DBU-levulinic acid solvents

Most organic solvents are unable to dissolve carbohydrates due to the lack of hydrogen bonding ability. The development of solvent systems for dissolving cellulose is of great importance for its utilization and conversion. In this study, four new cellulose solvents were designed using inexpensive levulinic acid (LevA) and 1,8-diazabicyclo [5,4,0] undec-7-ene (DBU) as raw materials. The results showed that the prepared DBU-LevA-2 solvent was able to dissolve up to 7 wt% of bamboo cellulose (DP = 860) and 16 wt% of microcrystalline cellulose (DP = 280) at 100 °C and regenerated without derivatization. Also, the molar ratio of each component of this solvent has a significant effect on the dissolution properties of cellulose. The regenerated cellulose had the typical crystalline characteristics of cellulose II. Subsequently, the interactions and microscopic behaviors of solvent and cellulose during the dissolution process were thoroughly investigated by using NMR spectroscopy combined with density functional theory. The systematic study showed that the hydrogen bond-forming ability provided by DBU, a superbase, plays an indispensable role in the overall solvent system.

Investigation of the solubility and dispersion degree of calf skin collagen in ionic liquids

Abstract

The dissolution of collagen in ionic liquids (ILs) was highly dependent on the polarity of ILs, which was influenced by their sorts and concentrations. Herein, the solubility and dispersion degree of collagen in two sorts of ILs, namely 1-ethyl-methylimidazolium tetrafluoroborate ([EMIM][BF4]) with low polarity and 1-ethyl-3-methylimidazolium acetate ([EMIM][Ac]) with high polarity in a concentration range from 10% to 70% at 10 °C were investigated. When 150 mg of collagen was added to 30 mg of ILs, the minimum soluble collagen concentration was 0.02 mg/mL in 70% [EMIM][BF4] with lowest polarity and the maximum was 3.57 mg/mL in 70% [EMIM][Ac] with highest polarity, which indicates that soluble collagen and insoluble collagen fibers were both present. For insoluble collagens, differential scanning calorimetry showed that the thermal-stability was weakened when increasing the ILs concentration and polarity, and the fiber arrangement was looser with a more uniform lyophilized structure, observed by atomic force microscopy and scanning electron microscopy. For soluble collagens, electrophoresis patterns and Fourier transform infrared spectroscopy showed that no polypeptide chain degradation occurred during dissolution, but the thermal denaturation temperature decreased by 0.26 °C~ 7.63 °C with the increase of ILs concentrations, measured by ultra-sensitive differential scanning calorimetry. Moreover, the aggregation of collagen molecules was reduced when ILs polarity was increased as determined by fluorescence measurements and dynamic light scattering, which resulted in an increased loose fiber arrangement observed by atomic force microscopy. If the structural integrity of collagen needs to be retained, then the ILs sorts and concentrations should be considered.

Graphical abstract

The status and developments of leather solid waste treatment: A mini-review

Leather making is one of the most widespread industries in the world. The production of leather goods generates different types of solid wastes and wastewater. These wastes will pollute the environment and threat the health of human beings if they are not well treated. Consequently, the treatment of pollution caused by the wastes from leather tanning is really important. In comparison with the disposal of leather wastewater, the treatment of leather solid wastes is more intractable. Hence, the treatment of leather solid wastes needs more innovations. To keep up with the rapid development of the modern leather industry, various innovative techniques have been newly developed. In this mini-review article, the major achievements in the treatment of leather solid wastes are highlighted. Emphasis will be placed on the treatment of chromium-tanned solid wastes; some new approaches are also discussed. We hope that this mini-review can provide some valuable information to promote the broad understanding and effective treatment of leather solid wastes in the leather industry.