A novel laccase from basidiomycete Cerrena sp.: Cloning, heterologous expression, and characterization

Characterization of the three-phase partitioned laccase from Trametes versicolor strain with antiproliferative activity against breast cancer cells

An extracellular laccase from T. versicolor was 20.4-fold purified by three-phase partitioning with high recovery (245 %) and biochemically characterized in detail for the first time. Its molecular weight was found to be 66.39 kDa. The enzyme showed activity towards the substrates ABTS, 2,6-DMP, guaiacol and hydroquinone. The substrates with the highest catalytic efficiency (kcat/Km) were ABTS and 2,6-DMP. The maximum laccase activity value was reached at 70 °C for all substrates; at 80 °C even an activity of >60 % could be maintained. The optimum pH values were 4.5, 5 and 5.5 for ABTS, 2,6-DMP and guaiacol, respectively. In solutions with pH values of 3.5 to 5, it was active for up to 6 h. Laccase activity was negatively affected by L-cysteine, kojic acid, β-mercaptoethanol, sodium azide and SDS. In contrast, non-ionic detergents showed no significant effects on the enzyme. The enzyme showed activity when exposed to low concentrations (<5 %) of the solvent's methanol, ethanol and DMSO. Among the metal ions, the enzyme showed strong sensitivity to Fe2+, while Ni2+ and Mn2+ showed increased activity. Biochemical analyses have shown that the laccase enzyme has superior properties compared to its commercial form (such as high temperature and pH stability, high affinity to its substrates and relatively high catalytic efficiency). Its anticancer effect on breast cancer cell lines was also investigated. The results emphasize the potential of pure laccase as an anticancer agent due to its selective lethal effect on breast cancer cells.

Biodegradation of bisphenol A by a Pichia pastoris whole-cell biocatalyst with overexpression of laccase from Bacillus pumilus and investigation of its potential degradation pathways

Bisphenol A (BPA), an endocrine disrupter with estrogen activity, can infiltrate animal and human bodies through the food chain. Enzymatic degradation of BPA holds promise as an environmentally friendly approach while it is limited due to lower stability and recycling challenges. In this study, laccase from Bacillus pumilus TCCC 11568 was expressed in Pichia pastoris (fLAC). The optimal catalytic conditions for fLAC were at pH 6.0 and 80 °C, with a half-life T1/2 of 120 min at 70 °C. fLAC achieved a 46 % degradation rate of BPA, and possible degradation pathways were proposed based on identified products and reported intermediates of BPA degradation. To improve its stability and degradation capacity, a whole-cell biocatalyst (WCB) was developed by displaying LAC (dLAC) on the surface of P. pastoris GS115. The functionally displayed LAC demonstrated enhanced thermostability and pH stability along with an improved BPA degradation ability, achieving a 91 % degradation rate. Additionally, dLAC maintained a degradation rate of over 50 % after the fourth successive cycles. This work provides a powerful catalyst for degrading BPA, which might decontaminate endocrine disruptor-contaminated water through nine possible pathways.

Optimizing laccase selection for enhanced outcomes: a comprehensive review

Despite their widespread applications in sectors such as pulp and paper, textile, food and beverage, pharmaceuticals, and biofuel production, laccases encounter challenges related to their activity and stability under varying reaction conditions. This review accumulates data on the complex interplay between laccase characteristics and reaction conditions for maximizing their efficacy in diverse biotechnological processes. Benefits of organic media such as improved substrate selectivity and reaction control, and their risks such as enzyme denaturation and reduced activity are reported. Additionally, the effect of reaction conditions such as pH and temperature on laccase activity and stability are gathered and reported. Sources like Bacillus pumilus, Alcaligenes faecalis, Bacillus clausii, and Bacillus tequilensis SN4 are producing laccases that are both thermo-active and alkali-active. Additionally, changes induced by the presence of various substances within reaction media such as metals, inhibitors, and organic solvents are also reported. Bacillus pumilus and Bacillus licheniformis LS04 produce the most resistant laccases in this case. Finally, the remarkable laccases have been highlighted and the proper laccase source for each industrial application is suggested.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-024-04015-5.

Transcriptomic and metabolomic analysis unveils a negative effect of glutathione metabolism on laccase activity in Cerrena unicolor 87613

The white rot fungus Cerrena unicolor 87613 has been previously shown to be a promising resource in laccase production, an enzyme with significant biotechnological applications. Conventional methods face technical challenges in improving laccase activity. Attempts are still being made to develop novel approaches for further enhancing laccase activity. This study aimed to understand the regulation of laccase activity in C. unicolor 87613 for a better exploration of the novel approach. Transcriptomic and metabolomic analyses were performed to identify key genes and metabolites involved in extracellular laccase activity. The findings indicated a strong correlation between the glutathione metabolism pathway and laccase activity. Subsequently, experimental verifications were conducted by manipulating the pathway using chemical approaches. The additive reduced glutathione (GSH) dose-dependently repressed laccase activity, while the GSH inhibitors (APR-246) and reactive oxygen species (ROS) inducer (H2O2) enhanced laccase activity. Changes in GSH levels could determine the intracellular redox homeostasis in interaction with ROS and partially affect the expression level of laccase genes in C. unicolor 87613 in turn. In addition, GSH synthetase was found to mediate GSH abundance in a feedback loop. This study suggests that laccase activity is negatively influenced by GSH metabolism and provides a theoretical basis for a novel strategy to enhance laccase activity by reprogramming glutathione metabolism at a specific cultivation stage.IMPORTANCEThe production of laccase activity is limited by various conventional approaches, such as heterologous expression, strain screening, and optimization of incubation conditions. There is an urgent need for a new strategy to meet industrial requirements more effectively. In this study, we conducted a comprehensive analysis of the transcriptome and metabolome of Cerrena unicolor 87613. For the first time, we discovered a negative role played by reduced glutathione (GSH) and its metabolic pathway in influencing extracellular laccase activity. Furthermore, we identified a feedback loop involving GSH, GSH synthetase gene, and GSH synthetase within this metabolic pathway. These deductions were confirmed through experimental investigations. These findings not only advanced our understanding of laccase activity regulation in its natural producer but also provide a theoretical foundation for a strategy to enhance laccase activity by reprogramming glutathione metabolism at a specific cultivation stage.

Expression and Characterization of Laccase Lac1 from Coriolopsis trogii Strain Mafic-2001 in Pichia pastoris and Its Degradation of Lignin

The laccase gene (Lac1) was cloned from Coriolopsis trogii strain Mafic-2001. Full-length sequence of Lac1 containing 11 exons and 10 introns is composed of 2140 nucleotides (nts). mRNA of Lac1 encoded for a protein of 517 aa. Nucleotide sequence of the laccase was optimized and expressed in Pichia pastoris X-33. SDS-PAGE analysis showed that the molecular weight of the purified recombinant laccase rLac1 was about 70 kDa. The optimum temperature and pH of rLac1 were 40 ℃ and 3.0, respectively. rLac1 showed high residual activity (90%) in the solutions after 1 h incubation at the pH ranging from 2.5 to 8.0. rLac1 maintained over 60% of laccase activity at the temperatures ranging from 20 to 60 °C, and kept higher than 50% of its activity at 40 °C for 2 h. The activity of rLac1 was promoted by Cu2+ and inhibited by Fe2+. Under optimal conditions, lignin degradation rates of rLac1 on the substrates of rice straw, corn stover, and palm kernel cake were 50.24%, 55.49%, and 24.43% (the lignin contents of substrates untreated with rLac1 were 100%), respectively. Treated with rLac1, the structures of agricultural residues (rice straw, corn stover, and palm kernel cake) were obviously loosened which was reflected by the analysis of scanning electron microscopy and Fourier transform infrared spectroscopy. Based on the specific activity of rLac1 on the degradation of lignin, rLac1 from Coriolopsis trogii strain Mafic-2001 has the potential for in-depth utilization of agricultural residues.

Genome-wide study of Cerrena unicolor 87613 laccase gene family and their mode prediction in association with substrate oxidation

BACKGROUND

Laccases are green biocatalysts with wide industrial applications. The study of efficient and specific laccase producers remains a priority. Cerrena species have been shown to be promising basidiomycete candidates for laccase production. Although two sets of Cerrena genome data have been publicly published, no comprehensive bioinformatics study of laccase gene family in C. unicolor has been reported, particularly concerning the analysis of their three-dimensional (3D) structures and molecular docking to substrates, like ABTS and aflatoxin B1 (AFB1).

RESULTS

In this study, we conducted a comprehensive genome-wide analysis of laccase gene family in C. unicolor 87613. We identified eighteen laccase genes (CuLacs) and classified them into three clades using phylogenetic analysis. We characterized these laccases, including their location in contig 5,6,9,12,15,19,26,27, gene structures of different exon-intron arrangements, molecular weight ranging from 47.89 to 141.41 kDa, acidic pI value, 5-15 conserved protein motifs, signaling peptide of extracellular secretion (harbored by 13 CuLacs) and others. In addition, the analysis of cis-acting element in laccase promoters indicated that the transcription response of CuLac gene family was regulatable and complex under different environmental cues. Furthermore, analysis of transcription pattern revealed that CuLac8, 12 and CuLac2, 13 were the predominant laccases in response to copper ions or oxidative stress, respectively. Finally, we focused on the 3D structure analysis of CuLac proteins. Seven laccases with extra transmembrane domains or special sequences were particularly interesting. Predicted structures of each CuLac protein with or without these extra sequences showed altered interacting amino acid residues and binding sites, leading to varied affinities to both ABTS and AFB1. As far as we know, it is the first time to discuss the influence of the extra sequence on laccase's affinity to substrates.

CONCLUSIONS

Our findings provide robust genetic data for a better understanding of the laccase gene family in C. unicolor 87613, and create a foundation for the molecular redesign of CuLac proteins to enhance their industrial applications.

Dynamics of the role of LacMeta laccase in the complete degradation and detoxification of malachite green

Laccases highlight for xenobiotic bioremediation, as well as application in the fine chemical, textile, biofuel and food industries. In a previous work, we described the preliminary characterization of laccase LacMeta, a promising enzyme for the bioremediation of dyes, able to decolorization malachite green (MG), trypan blue, methylene blue. Here we demonstrate that LacMeta is indeed suitable for the complete degradation and detoxification of MG dye, not just for its discoloration, since some works show false positives due to the formation of colorless intermediates such as leucomalachite. The optimal pH and temperature parameters of LacMeta were 5.0 and 50 °C, respectively (MG as substrate). LacMeta was tolerant of up to 10 mmol L^- 1 EDTA (82%) and up to 5% (V/V) acetone (91%) and methanol (71%), while SDS promoted severe inhibition. For ions, a high tolerance to cobalt, zinc, manganese, and calcium (10 mmol L^- 1) was also observed (> 90%). Even under high-salinity conditions (1 mol L^- 1 NaCl), the residual bleaching activity of the dye remained at 61%. Furthermore, the bleaching product of MG did not inhibit the germination of sorghum and tomato seeds and was inert to the vegetative structures of the germinated seedlings. Additionally, this treatment effectively reduced the cytotoxic effect of the dye on microorganisms (Escherichia coli and Azospirillum brasilense), which can be explained by H-NMR spectral analysis results since LacMeta completely degraded the peak signals corresponding to the aromatic rings in the dye, demonstrating extreme efficiency in the bioremediation of the xenobiotic at high concentrations (50 mg L^- 1).

Characterisation of a laccase isolated from Trametes hirsuta and its application in the oligomerisation of phenolic compounds

Phenolic compounds are widely distributed in nature and industrial environment, and their detoxification or bioactive enhancement is of great value to environmental protection and industrial development. Laccases are multicopper oxidases that catalyse the oligo- or polymerisation of phenolic compounds. Identifying new laccase producers and investigating their application potential are of great importance. In this study, a white-rot fungus, Trametes hirsuta EZ1, with significantly high laccase productivity was isolated. The optimum conditions were studied for the maximum fermentation of extracellular laccase, which was achieved at 150 U/mL with a medium containing 10% strain EZ1, 7% maltodextrin, 1.5% peptone, and 0.5 mM Cu²⁺, and incubation at initial pH 6.0, 32 °C, and 180 rpm for nine days. Subsequently, a 70-kDa laccase was purified that showed activity over a wide range of temperature and pH, sensitivity to many metal ions and sodium dodecyl sulphate, and high tolerance to organic solvents. Purified laccase showed a significant unreported effect by catalysing catechol or ferulic acid into dimers, trimers, and tetramers or caffeic acid into dimers, trimers, tetramers, and pentamers. The oligomeric mixtures exhibited increased antioxidative capacity compared to that of each parent monomer, except for caffeic acid derivatives. Our study offers a novel strain source for laccase production and broadens its application in the enhancement of bioactive compounds.

A Brief History of Colour, the Environmental Impact of Synthetic Dyes and Removal by Using Laccases

The history of colour is fascinating from a social and artistic viewpoint because it shows the way; use; and importance acquired. The use of colours date back to the Stone Age (the first news of cave paintings); colour has contributed to the social and symbolic development of civilizations. Colour has been associated with hierarchy; power and leadership in some of them. The advent of synthetic dyes has revolutionized the colour industry; and due to their low cost; their use has spread to different industrial sectors. Although the percentage of coloured wastewater discharged by the textile; food; pharmaceutical; cosmetic; and paper industries; among other productive areas; are unknown; the toxic effect and ecological implications of this discharged into water bodies are harmful. This review briefly shows the social and artistic history surrounding the discovery and use of natural and synthetic dyes. We summarise the environmental impact caused by the discharge of untreated or poorly treated coloured wastewater to water bodies; which has led to physical; chemical and biological treatments to reduce the colour units so as important physicochemical parameters. We also focus on laccase utility (EC 1.10.3.2), for discolouration enzymatic treatment of coloured wastewater, before its discharge into water bodies. Laccases (p-diphenol: oxidoreductase dioxide) are multicopper oxidoreductase enzymes widely distributed in plants, insects, bacteria, and fungi. Fungal laccases have employed for wastewater colour removal due to their high redox potential. This review includes an analysis of the stability of laccases, the factors that influence production at high scales to achieve discolouration of high volumes of contaminated wastewater, the biotechnological impact of laccases, and the degradation routes that some dyes may follow when using the laccase for colour removal.

Methanol addition after glucose depletion improves rPOXA 1B production under the pGap in P. pastoris X33: breaking the habit

The purpose of this study was to demonstrate that methanol addition after glucose depletion has a positive effect on improving rPOXA 1B production under the control of pGap in P. pastoris. Four different culture media (A, B, C and D) were used to culture P. pastoris X33/pGapZαA-LaccPost-Stop (clone 1), containing a previously optimized POXA 1B synthetic gene coding for P. ostreatus laccase, which after glucose depletion was supplemented or not with methanol. Enzyme activity in culture media without methanol (A, B, C and D) was influenced by media components, presenting activity of 1254.30 ± 182.44, 1373.70 ± 182.44, 1343.50 ± 40.30 and 8771.61 ± 218.79 U L−1, respectively. In contrast, the same culture media (A, B, C and D) with methanol addition 24 h after glucose depletion attained activity of 4280.43 ± 148.82, 3339.02 ± 64.36, 3569.39 ± 68.38 and 14,868.06 ± 461.58 U L−1 at 192 h, respectively, representing an increase of approximately 3.9-, 2.4-, 3.3- and 1.6-fold compared with culture media without methanol. Methanol supplementation had a greater impact on volumetric enzyme activity in comparison with biomass production. We demonstrated what was theoretically and biochemically expected: recombinant protein production under pGap control by methanol supplementation after glucose depletion was successful, as a feasible laboratory production strategy of sequential carbon source addition, breaking the habit of utilizing pGap with glucose.

Recent developments of tools for genome and metabolome studies in basidiomycete fungi and their application to natural product research

Basidiomycota are a large and diverse phylum of fungi. They can make bioactive metabolites that are used or have inspired the synthesis of antibiotics and agrochemicals. Terpenoids are the most abundant class of natural products encountered in this taxon. Other natural product classes have been described, including polyketides, peptides, and indole alkaloids. The discovery and study of natural products made by basidiomycete fungi has so far been hampered by several factors, which include their slow growth and complex genome architecture. Recent developments of tools for genome and metabolome studies are allowing researchers to more easily tackle the secondary metabolome of basidiomycete fungi. Inexpensive long-read whole-genome sequencing enables the assembly of high-quality genomes, improving the scaffold upon which natural product gene clusters can be predicted. CRISPR/Cas9-based engineering of basidiomycete fungi has been described and will have an important role in linking natural products to their genetic determinants. Platforms for the heterologous expression of basidiomycete genes and gene clusters have been developed, enabling natural product biosynthesis studies. Molecular network analyses and publicly available natural product databases facilitate data dereplication and natural product characterisation. These technological advances combined are prompting a revived interest in natural product discovery from basidiomycete fungi.This article has an associated Future Leader to Watch interview with the first author of the paper.

A New Laccase of Lac 2 from the White Rot Fungus Cerrena unicolor 6884 and Lac 2-Mediated Degradation of Aflatoxin B1

Aflatoxin B₁ (AFB₁) is a known toxic human carcinogen and can be detoxified by laccases, which are multicopper oxidases that convert several environmental pollutants and toxins. In this study, a new laccase that could catalyze AFB₁ degradation was purified and identified from the white-rot fungus Cerrena unicolor 6884. The laccase was purified using (NH₄)₂SO₄ precipitation and anion exchange chromatography, and then identified as Lac 2 through zymogram and UHPLC-MS/MS based on the Illumina transcriptome analysis of C. unicolor 6884. Six putative laccase protein sequences were obtained via functional annotation. The lac 2 cDNA encoding a full-length protein of 512 amino acids was cloned and sequenced to expand the fungus laccase gene library for AFB₁ detoxification. AFB₁ degradation by Lac 2 was conducted in vitro at pH 7.0 and 45 °C for 24 h. The half-life of AFB₁ degradation catalyzed by Lac 2 was 5.16 h. Acetosyringone (AS), Syrinagaldehyde (SA) and [2,2' -azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid)] (ABTS) at 1 mM concentration seemed to be similar mediators for strongly enhancing AFB₁ degradation by Lac 2. The product of AFB₁ degradation catalyzed by Lac 2 was traced and identified to be Aflatoxin Q₁ (AFQ₁) based on mass spectrometry data. These findings are promising for a possible application of Lac 2 as a new aflatoxin oxidase in degrading AFB₁ present in food and feeds.

Purification and properties of a laccase from the mushroom Agaricus sinodeliciosus

A homogeneous monomeric laccase (ASL) from Agaricus sinodeliciosus, with a molecular mass of 65 kDa, was isolated using ion-exchange chromatography (CM-cellulose and Q-Sepharose) and gel-filtration chromatography (Superdex 75). This laccase exhibited maximum activity at 50 °C and pH 5.0. Hg²⁺ and Cd²⁺ significantly inhibited its activity. The laccase displayed a K_m value of 0.9 mM toward 2,2'-azinobis-(3-ethylbenzthiazoline-6-sulfonate) (ABTS). In addition to ABTS, ASL exhibited higher affinity toward o-toluidine and benzidine than other substrates. ASL is able to decolorize malachite green and Eriochrome black T.

Expression of Pleurotus ostreatus Laccase Gene in Pichia pastoris and Its Degradation of Corn Stover Lignin

Pleurotus ostreatus is a species of white-rot fungi that effectively degrades lignin. In this study, we aimed to efficiently express the lac-2 gene of Pleurotus ostreatus in the Pichia pastoris X33 yeast strain. The enzymatic properties of recombinant yeast were determined, and its ability to degrade corn stover lignin was determined. The results showed the optimum pH values of recombinant laccase for 2,2’-Azinobis-3-ethylbenzothiazoline-6-sulfonic acid, 2,6-dimethoxyphenol, and 2-methoxyphenol were 3.0, 3.0, and 3.5, respectively. The optimum reaction temperature was 50 °C, and it had good thermal stability and acid and alkali resistance. The degradation rate of lignin in corn stover by recombinant laccase was 18.36%, and the native Pleurotus ostreatus degradation rate was 14.05%, the difference between them is significant (p < 0.05). This experiment lays a foundation for the study of the degradation mechanism of lignin by laccase.

The heterologous expression, characterization, and application of a novel laccase from Bacillus velezensis

Laccases have a huge potential in numerous environmental and industrial applications due to the ability to oxidized a wide range of substrates. Here, a novel laccase gene from the identified Bacillus velezensis TCCC 111904 was heterologously expressed in Escherichia coli. The optimal temperature and pH for oxidation by recombinant laccase (rLac) were 80 °C and 5.5, respectively, in the case of the substrate 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), and 80 °C and 7.0, respectively, in the case of 2,6-dimethoxyphenol (2,6-DMP). rLac exhibited high thermostability and pH stability over a wide range (pH 3.0, 7.0, and 9.0). Additionally, most of the metal ions did not inhibit the activity of rLac significantly. rLac showed great tolerance against high concentration of NaCl, and 50.8% of its initial activity remained in the reaction system containing 500 mM NaCl compared to the control. Moreover, rLac showed a high efficiency in decolorizing different types of dyes including azo, anthraquinonic, and triphenylmethane dyes at a high temperature (60 °C) and over an extensive pH range (pH 5.5, 7.0, and 9.0). These unique characteristics of rLac indicated that it could be a potential candidate for applications in treatment of dye effluents and other industrial processes.

Optimization of Laccase from Ganoderma lucidum Decolorizing Remazol Brilliant Blue R and Glac1 as Main Laccase-Contributing Gene

Many dyes and pigments are used in textile and printing industries, and their wastewater has been classed as a top source of pollution. Biodegradation of dyes by fungal laccase has great potential. In this work, the influence of reaction time, pH, temperature, dye concentration, metal ions, and mediators on laccase-catalyzed Remazol Brilliant Blue R dye (RBBR) decolorization were investigated in vitro using crude laccase from the white-rot fungus Ganoderma lucidum. The optimal decolorization percentage (50.3%) was achieved at 35 °C, pH 4.0, and 200 ppm RBBR in 30 min. The mediator effects from syringaldehyde, 1-hydroxybenzotriazole, and vanillin were compared, and 0.1 mM vanillin was found to obviously increase the decolorization percentage of RBBR to 98.7%. Laccase-mediated decolorization percentages significantly increased in the presence of 5 mM Na+ and Cu2+, and decolorization percentages reached 62.4% and 62.2%, respectively. Real-time fluorescence-quantitative PCR (RT-PCR) and protein mass spectrometry results showed that among the 15 laccase isoenzyme genes, Glac1 was the main laccase-contributing gene, contributing the most to the laccase enzyme activity and decolorization process. These results also indicate that under optimal conditions, G. lucidum laccases, especially Glac1, have a strong potential to remove RBBR from reactive dye effluent.

Lignocellulose utilization and bacterial communities of millet straw based mushroom (Agaricus bisporus) production

Agaricus bisporus is in general cultivated on wheat and rice straw in China. However, millet straw is a potential alternative resource for Agaricus bisporus cultivation, but this has hardly been studied. In the present study, the feasibility of millet straw based mushroom production was analyzed by three successive trials. Mature compost demonstrated high quality with total nitrogen, pH, and C/N ratio of 2.0%, 7.5, and 18:1 respectively, which was suitable for mushroom mycelia growth. During composting, 47–50% of cellulose, 63–65% of hemicellulose, and 8–17% lignin were degraded, while 22–27% of cellulose, 14–16% of hemicellulose, and 15–21% of lignin were consumed by A. bisporus mycelia during cultivation. The highest FPUase and CMCase were observed during mushroom flushes. Endo-xylanase had the key role in hemicellulose degradation with high enzyme activity during cultivation stages. Laccase participated in lignin degradation with the highest enzyme activity in Pinning stage followed by a sharp decline at the first flush. Yield was up to 20 kg/m², as this is similar to growth on wheat straw, this shows that millet straw is an effective resource for mushroom cultivation. Actinobacteria, Bacteroidetes, Chloroflexi, Deinococcus-Thermus, Firmicutes, and Proteobacteria were the dominant phyla, based on 16S rRNA gene sequencing during composting. The key environmental factors dominating bacterial communities of the samples were determined to be pH value, cellulose content, and hemicellulose content for prewetting and premixed phase of basic mixture (P0); moisture content for phase I (PI); and nitrogen content, lignin content, and ash content for phase II (PII), respectively.

Cerrenins A-C, cerapicane and isohirsutane sesquiterpenoids from the endophytic fungus Cerrena sp

One new cerapicane cerrenin A (1), and two new isohirsutane sesquiterpenoids cerrenins B and C (2 and 3), were isolated from the broth extract of Cerrena sp. A593. Cerrenin A featured a rare cage-like bicyclo[3.2.1]octane skeleton, and cerrenin B represented the rearranged triquinane-type sesquiterpenoid. Their structures were extensively elucidated by NMR spectroscopic analysis with the absolute configuration determined by X-ray crystallography and ECD calculations. The anti-cancer activity for all the compounds were evaluated, and their plausible biosynthetic relationships involving fascinating carbon skeleton rearrangements were also suggested.

Expression of a new laccase from Moniliophthora roreri at high levels in Pichia pastoris and its potential application in micropollutant degradation

Laccases have gained significant attention due to their emerging applications including bioremediation, biomass degradation and biofuel cells. One of the prerequisites for the industrial application of laccases is their sufficient availability. However, expression levels of recombinantly expressed laccases are often low. In this study Mrl2, a new laccase from the basidiomycete Moniliophthora roreri, was cloned in Pichia pastoris and produced in an optimized fed-batch process at an exceptionally high yield of 1.05 g l⁻¹. With a redox potential of 0.58 V, Mrl2 belongs to mid-redox potential laccases. However, Mrl2 demonstrated high k_cat values of 316, 20, 74, and 36 s⁻¹ towards 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS), syringaldazine (SGZ), 2,6-dimethoxyphenol (2,6-DMP) and guaiacol, respectively. Mrl2 remained stable above pH 6 and in the presence of many metal ions, which is important for application in bioremediation. Mrl2 was investigated for the ability to degrade endocrine disrupting chemicals (EDCs) and non-steroidal anti-inflammatory drugs (NSDAIs) at neutral pH value. The enzyme accepted and converted estrone, 17β-estradiol, estriol, the synthetic contraceptive 17α-ethinyl estradiol and bisphenol A at pH 7 faster than high-potential laccases from Trametes versicolor. For example, within 30 min Mrl2 removed more than 90% bisphenol A, 17ß-estradiol, 17α-ethinyl estradiol and estriol, respectively. The concentration of the recalcitrant drug diclofenac dropped by 56% after 20 h incubation with Mrl2.

Overexpression of a Laccase with Dye Decolorization Activity from sp. Induced in

Laccases from bacteria have been widely studied in the past 2 decades due to the higher growth rate of bacteria and their excellent thermal and alkaline pH stability. In this study, a novel laccase gene was cloned from<i> Bacillus</i> sp., analyzed, and functionally expressed in<i> Escherichia coli</i>. The laccase was highly induced in the <i>E. coli</i> expression system with a maximum intracellular activity of 16 U mg^-1 protein. The optimal temperature and pH of the purified laccase were 40°C and 4.6, respectively, when ABTS (2,2'-azino-bis[3-ethylbenzothiazoline-6-sulfonate]) was used as the substrate. The purified laccase showed high stability in the pH range of 3.0-9.0, and retained more than 70% of its activity after 24 h of incubation at 40°C with a pH value of 9.0. Furthermore, the enzyme exhibited extremely high temperature and ion metal tolerance. The half-life of the purified laccase at 70°C was 15.9 h. The purified laccase could efficiently decolorize 3 chemical dyes, especially in the presence of ABTS as a mediator. The high production of this laccase in<i> E. coli</i> and exceptional characteristics of the recombinant enzyme protein make it a promising candidate for industrial applications.

Recombinant exochitinase of the thermophilic mould Myceliopthora thermophila BJA: Characteristics and utility in generating N-acetyl glucosamine and in biocontrol of phytopathogenic fungi

Chitinase from the thermophilic mould Myceliopthora thermophila BJA (MtChit) is an acid tolerant, thermostable and organic solvent stable biocatalyst which does not require any metal ions for its activity. To produce high enzyme titres, reduce fermentation time and overcome the need for induction, this enzyme has been heterologously expressed under GAP promoter in the GRAS yeast, Pichia pastoris. The production medium supplemented with the permeabilizing agent Tween-20 supported two-fold higher rMtChit production (5.5 × 10³ U L^-1 ). The consensus sequences S(132)xG(133)G(134) and D(168)xxD(171)xD(173)xE(175) in the enzyme have been found to represent the substrate binding and catalytic sites, respectively. The rMtChit, purified to homogeneity by a two-step purification strategy, is a monomeric glycoprotein of ∼48 kDa, which is optimally active at 55°C and pH 5.0. The enzyme is thermostable with t_1/2 values of 113 and 48 min at 65 and 75°C, respectively. Kinetic parameters K_m , V_max , k_cat , and k_cat /K_m of the enzyme are 4.655 mg mL^-1 , 34.246 nmol mg^-1  s^-1 , 3.425 × 10⁶ min^-1 , and 1.36 × 10^-6 mg mL^-1  min^-1 , respectively. rMtChit is an unique exochitinase, since its action on chitin liberates N-acetylglucosamine NAG. The enzyme inhibits the growth of phytopathogenic fungi like Fusarium oxysporum and Curvularia lunata, therefore, this finds application as biofungicide at high temperatures during summer in tropics. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:70-80, 2017.

Laccase Gene Family in Cerrena sp. HYB07: Sequences, Heterologous Expression and Transcriptional Analysis

Laccases are a class of multi-copper oxidases with industrial potential. In this study, eight laccases (Lac1-8) from Cerrena sp. strain HYB07, a white-rot fungus with high laccase yields, were analyzed. The laccases showed moderate identities to each other as well as with other fungal laccases and were predicted to have high redox potentials except for Lac6. Selected laccase isozymes were heterologously expressed in the yeast Pichia pastoris, and different enzymatic properties were observed. Transcription of the eight laccase genes was differentially regulated during submerged and solid state fermentation, as shown by quantitative real-time polymerase chain reaction and validated reference genes. During 6-day submerged fermentation, Lac7 and 2 were successively the predominantly expressed laccase gene, accounting for over 95% of all laccase transcripts. Interestingly, accompanying Lac7 downregulation, Lac2 transcription was drastically upregulated on days 3 and 5 to 9958-fold of the level on day 1. Consistent with high mRNA abundance, Lac2 and 7, but not other laccases, were identified in the fermentation broth by LC-MS/MS. In solid state fermentation, less dramatic differences in transcript abundance were observed, and Lac3, 7 and 8 were more highly expressed than other laccase genes. Elucidating the properties and expression profiles of the laccase gene family will facilitate understanding, production and commercialization of the fungal strain and its laccases.

Recent Advances in Marine Enzymes for Biotechnological Processes

In the last decade, new trends in the food and pharmaceutical industries have increased concern for the quality and safety of products. The use of biocatalytic processes using marine enzymes has become an important and useful natural product for biotechnological applications. Bioprocesses using biocatalysts like marine enzymes (fungi, bacteria, plants, animals, algae, etc.) offer hyperthermostability, salt tolerance, barophilicity, cold adaptability, chemoselectivity, regioselectivity, and stereoselectivity. Currently, enzymatic methods are used to produce a large variety of products that humans consume, and the specific nature of the enzymes including processing under mild pH and temperature conditions result in fewer unwanted side-effects and by-products. This offers high selectivity in industrial processes. The marine habitat has been become increasingly studied because it represents a huge source potential biocatalysts. Enzymes include oxidoreductases, hydrolases, transferases, isomerases, ligases, and lyases that can be used in food and pharmaceutical applications. Finally, recent advances in biotechnological processes using enzymes of marine organisms (bacterial, fungi, algal, and sponges) are described and also our work on marine organisms from South America, especially marine-derived fungi and bacteria involved in biotransformations and biodegradation of organic compounds.

The trade-off of availability and growth inhibition through copper for the production of copper-dependent enzymes by Pichia pastoris

Background

Copper is an essential chemical element for life as it is a part of prosthetic groups of enzymes including super oxide dismutase and cytochrome c oxidase; however, it is also toxic at high concentrations. Here, we present the trade-off of copper availability and growth inhibition of a common host used for copper-dependent protein production, Pichia pastoris.

Results

At copper concentrations ranging from 0.1 mM (6.35 mg/L) to 2 mM (127 mg/L), growth rates of 0.25 h⁻¹ to 0.16 h⁻¹ were observed with copper uptake of as high as 20 mg_copper/g_CDW. The intracellular copper content was estimated by subtracting the copper adsorbed on the cell wall from the total copper concentration in the biomass. Higher copper concentrations led to stronger cell growth retardation and, at 10 mM (635 mg/L) and above, to growth inhibition. To test the determined copper concentration range for optimal recombinant protein production, a laccase gene from Aspergillus clavatus [EMBL: EAW07265.1] was cloned under the control of the constitutive glyceraldehyde-3-phosphate (GAP) dehydrogenase promoter for expression in P. pastoris. Notably, in the presence of copper, laccase expression improved the specific growth rate of P. pastoris. Although copper concentrations of 0.1 mM and 0.2 mM augmented laccase expression 4 times up to 3 U/mL compared to the control (0.75 U/mL), while higher copper concentrations resulted in reduced laccase production. An intracellular copper content between 1 and 2 mg_copper/g_CDW was sufficient for increased laccase activity. The physiology of the yeast could be excluded as a reason for the stop of laccase production at moderate copper concentrations as no flux redistribution could be observed by ¹³C-metabolic flux analysis.

Conclusion

Copper and its pivotal role to sustain cellular functions is noteworthy. However, knowledge on its cellular accumulation, availability and distribution for recombinant protein production is limited. This study attempts to address one such challenge, which revealed the fact that intracellular copper accumulation influenced laccase production and should be considered for high protein expression of copper-dependent enzymes when using P. pastoris. The results are discussed in the context of P. pastoris as a general host for copper -dependent enzyme production.

Electronic supplementary material

The online version of this article (doi:10.1186/s12896-016-0251-3) contains supplementary material, which is available to authorized users.

Laccase Production and Differential Transcription of Laccase Genes in Cerrena sp. in Response to Metal Ions, Aromatic Compounds, and Nutrients

Laccases can oxidize a wide range of aromatic compounds and are industrially valuable. Laccases often exist in gene families and may differ from each other in expression and function. Quantitative real-time polymerase chain reaction (qPCR) was used for transcription profiling of eight laccase genes in Cerrena sp. strain HYB07 with validated reference genes. A high laccase activity of 280.0 U/mL was obtained after submerged fermentation for 5 days. Laccase production and laccase gene transcription at different fermentation stages and in response to various environmental cues were revealed. HYB07 laccase activity correlated with transcription levels of its predominantly expressed laccase gene, Lac7. Cu²⁺ ions were indispensable for efficient laccase production by HYB07, mainly through Lac7 transcription induction, and no aromatic compounds were needed. HYB07 laccase synthesis and biomass accumulation were highest with non-limiting carbon and nitrogen. Glycerol and inorganic nitrogen sources adversely impacted Lac7 transcription, laccase yields, and fungal growth. The present study would further our understanding of transcription regulation of laccase genes, which may in turn facilitate laccase production as well as elucidation of their physiological roles.