Development of grafted xyloglucan micelles for pulmonary delivery of curcumin: In vitro and in vivo studies

The pharmacokinetics and tissue distribution of curcumin following inhalation administration in rats-A comparative analysis with oral and intravenous routes

A sensitive and simple method using ultra-liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was developed and validated to determine the concentration of curcumin in rat plasma and tissue samples. Emodin was selected as the internal standard (IS), and biological samples were pretreated with simple one-step acetonitrile precipitation. The calibration curves exhibited linearity within the range of 1-1000 ng/ml for both rat plasma and tissue samples. The accuracy and precision of intra-day as well as inter-day determinations ranged from 99.3% to 117.3% and from 98.2% to 105.1%, respectively. This method demonstrated excellent recovery rates ranging from 76.4% to 96.4% along with minimal matrix effect ranging from 86.5% to 99.6%. The effectiveness of this method was successfully demonstrated through its application in an in vivo pharmacokinetic and tissue distribution study after single administration via inhalation (100 mg/kg), oral gavage (100 mg/kg) and intravenous injection (2.5 mg/kg) of curcumin in rats. The results revealed that inhalation significantly improved the bioavailability of curcumin, with most of the drug being deposited in the lung. These findings highlight inhalation as an effective route for targeted delivery of drugs directly into lung tissues, thus suggesting potential future applications for treating pulmonary diseases utilizing inhaled curcumin.

Bioavailability enhancement of atazanavir sulphate using mixed micelles: in vitro characterization and in vivo pharmacokinetic study

This study aims to enhance the oral bioavailability of atazanavir sulphate, a human immunodeficiency virus-1 protease inhibitor known for its poor oral absorption, by formulating mixed micelles using Soluplus® and Kolliphor HS 15. Mixed micelles were prepared through the thin film hydration technique. The micelles were characterized for particle size, polydispersity index (PDI), zeta potential, entrapment efficiency, drug loading, and confirmed for atazanavir sulphate encapsulation via FTIR studies. In vitro release studies were conducted, and the morphology of the micelles was examined using TEM. Atazanavir sulphate mixed micelles exhibited a particle size of 62.92 nm, PDI of 0.221, zeta potential of - 17.8 mV, high entrapment efficiency (99.76 ± 1.06), and drug loading (14 ± 0.82). In vitro release studies demonstrated sustained release up to 12 h, with maximum solubility observed at 2 h under pH 1.2 conditions. TEM analysis revealed spherical micelle morphology. Oral administration of atazanavir sulphate mixed micelles showed a 1.23-fold increase in relative bioavailability compared to pure drug suspension. The formulation of mixed micelles using Soluplus® and Kolliphor HS 15 offers a promising strategy to improve the oral bioavailability of atazanavir sulphate. These findings suggest the potential utility of mixed micelles as an effective delivery system for atazanavir sulphate, offering enhanced therapeutic outcomes for patients.

Preparation of xyloglucan-grafted poly(N-hydroxyethyl acrylamide) copolymer by free-radical polymerization for in vitro evaluation of human dermal fibroblasts

Xyloglucan is a rigid polysaccharide that belongs to the carbohydrate family. This hemicellulose compound has been widely used in biomedical research because of its pseudoplastic, mucoadhesive, mucomimetic, and biocompatibility properties. Xyloglucan is a polyose with no amino groups in its structure, which also limits its range of applications. It is still unknown whether grafting hydrophilic monomers onto xyloglucan can produce derivatives that overcome these shortcomings. This work aimed to prepare the first copolymers in which N-hydroxyethyl acrylamide is grafted onto tamarind xyloglucan by free-radical polymerization. The biocompatibility of these structures in vitro was evaluated using human dermal fibroblasts. Gamma radiation-induced graft polymerization was employed as an initiator by varying the radiation dose from 5-25 kGy. The structure of the graft copolymer, Xy-g-poly(N-hydroxyethyl acrylamide), was verified by thermal analysis, Fourier transform infrared spectroscopy, and nuclear magnetic resonance spectroscopy. The findings indicate that the degree of grafting and the cytotoxicity/viability of the xyloglucan-based copolymer were independent of dose. Notably, the grafted galactoxyloglucan exhibited efficient support for human dermal fibroblasts, showing heightened proliferative capacity and superior migration capabilities compared to the unmodified polymer. This copolymer might have the potential to be used in skin tissue engineering.

Natural Products-Based Inhaled Formulations for Treating Pulmonary Diseases

Given the unique physiological and pathological characteristics of the lung, the direct, inhalable route is more conducive to pulmonary drug delivery and disease control than traditional systemic drug delivery, significantly circumventing drug loss, off-target effects, systemic and organ toxicity, etc., and is widely regarded as the preferred regimen for pulmonary drug delivery. However, very few lung diseases are currently treated with the preferred inhaled formulations, such as asthma, chronic obstructive pulmonary disease and pulmonary hypertension. And there is a lack of appropriate inhaled formulations for other critical lung diseases, such as lung cancer and pulmonary fibrosis, due to the fact that the physicochemical properties of the drugs and their pharmacokinetic profiles do not match the physiology of the lung, and conventional inhalation devices are unable to deliver them to the specific parts of the lung. Phytochemicals of natural origin, due to their wide availability and clear safety profile, hold great promise for the preparation of inhalable formulations to improve the current dilemma in the treatment of lung diseases. In particular, the preparation of inhalable formulations based on nano- and microparticulate carriers for drug delivery to deep lung tissues, which overcome the shortcomings of conventional inhalation therapies while targeting the drug activity directly to a specific part of the lung, may be the best approach to change the current dilemma of lung disease treatment. In this review, we discuss recent advances in nano- and micron-carrier-based inhalation formulations for the delivery of natural products for the treatment of pulmonary diseases, which may represent an opportunity for practical clinical translation of natural products.

Nano-Strategies for Improving the Bioavailability of Inhaled Pharmaceutical Formulations

Pulmonary pharmaceutical formulations are targeted for the treatment of respiratory diseases. However, their application is limited due to the physiological characteristics of the lungs, such as branching structure, mucociliary and macrophages, as well as certain properties of the drugs like particle size and solubility. Nano-formulations can ameliorate particle sizes and improve drug solubility to enhance bioavailability in the lungs. The nano-formulations for lungs reviewed in this article can be classified into nanocarriers, no-carrier-added nanosuspensions and polymer-drug conjugates. Compared with conventional inhalation preparations, these novel pulmonary pharmaceutical formulations have their own advantages, such as increasing drug solubility for better absorption and less inflammatory reaction caused by the aggregation of insoluble drugs; prolonging pulmonary retention time and reducing drug clearance; improving the patient compliance by avoiding multiple repeated administrations. This review will provide the reader with some background information for pulmonary drug delivery and give an overview of the existing literature about nano-formulations for pulmonary application to explore nano-strategies for improving the bioavailability of pulmonary pharmaceutical formulations.

Mannose-anchored N,N,N-trimethyl chitosan nanoparticles for pulmonary administration of etofylline

Drug delivery to lungs via pulmonary administration offers potential for the development of new drug delivery systems. Here we fabricated the etofylline (ETO) encapsulated mannose-anchored N,N,N-trimethyl chitosan nanoparticles (Mn-TMC NPs). The prominent characteristics like biocompatibility, controlled release, targeted delivery, high penetrability, enhanced physical stability, and scalability mark Mn-TMC NPs as a viable alternative to various nanoplatform technologies for effective drug delivery. Mannosylation of TMC NPs leads to the evolution of new drug delivery vehicle with gratifying characteristics, and potential benefits in efficient drug therapy. It is widely accepted that following pulmonary administration, the introduction of mannose to the surface of drug nanocarriers provide selective macrophage targeting via receptor-mediated endocytosis. The fabricated Mn-TMC NPs exhibited particle size of 223.3 nm, PDI 0.490, and ζ-potential -19.1 mV, drug-loading capacity 76.26 ± 1.2%, and encapsulation efficiency of 91.75 ± 0.88%. Sustained drug release, biodegradation studies, stability, safety, and aerodynamic behavior revealed the effectiveness of prepared nanoformulation for pulmonary administration. In addition, the in vivo pharmacokinetic studies in Wistar rat model revealed a significant improvement in therapeutic efficacy of ETO, illustrating mannosylation a promising approach for efficient therapy of airway diseases following pulmonary administration.

In vitro Permeability and Bioavailability Enhancement of Curcumin by Nanoemulsion via Pulmonary Administration

Background:

Curcumin has shown considerable pharmacological activity, including antiinflammatory activity. Nevertheless, the pharmacological effect of curcumin may be limited because of poor water solubility, metabolizing rapidly and systemic elimination.

Objective:

In the current research, a novel curcumin nanoemulsion (Cur-NE) was developed for improving in vitro permeability and bioavailability via pulmonary administration.

Methods:

The Cur-NE was prepared by a modified emulsification-evaporation method and its surfac morphology, particles size and distribution, and encapsulation efficiencies of drug in NE were characterized. In vitro transmembrane transport experiment was performed to investigate the transport profile of curcumin across Xenopus alveolar membrane. The pharmacokinetics of Cur-NE in rabbits was evaluated.

Results:

The average particles size, zeta potential, polydispersity index of Cur-NE were 234.8±1.08 nm, -19.5±0.2 mV and 0.10, respectively. Xenopus alveolar membrane was used in the transmembrane transport study, the cumulative amount of curcumin was 6.6% for curcumin suspensions, but nearly 50% for Cur-NE at the time of 8 h (P<0.05). The pharmacokinetic study in rabbits, the absolute bioavailability of curcumin for Cur-NE was 24.11%.

Conclusion:

Thus, a novel Cur-NE for pulmonary drug delivery was developed for improving in vitro permeability and bioavailability, which can be an alternate to the oral administration.

Preparation, physicochemical and pharmacological study of curcumin solid dispersion with an arabinogalactan complexation agent

Pharmaceutical solid dispersions (SD) of curcumin (Cur) with macromolecule polysaccharide arabinogalactan (AG) from wood of Larix sibirica were prepared by mechanical ball milling. The physical properties of the dispersed curcumin mixture in solid state were characterized by scanning electron microscope, differential scanning calorimetry and powder X-ray diffraction studies. These methods showed a strong decrease in the degree of crystallinity of Cur and its transformation to amorphization state, accompanied by the formation of the guest-host type complexes. The behavior of the samples in solutions was characterized by reverse phase HPLC, ¹H NMR spectroscopy, UV-Visible spectroscopy and gel permeation chromatography (GPC). Mechanochemically prepared complexes demonstrated the increased solubility of Cur up to ~10.5 times in contrast to pure curcumin. The rapid storage test showed high chemical stability of Cur, which depended on mass relations of Cur-AG. Besides, improved membrane permeability of Cur-AG SD was tested by parallel artificial membrane permeability assay. Pharmacokinetic study of Cur-AG SD formulation in rat demonstrated a significant~8-fold enhancement of bioavailability in comparison to pure curcumin. In MTT tests, Cur-AG SD showed moderate cytotoxicity against human glioblastoma cells and immortalized human fibroblasts. Therefore, Cur-AG solid dispersion was a more promising and efficacious formulation for application in oral drug delivery.

Development and evaluation of nanoemulsion and microsuspension formulations of curcuminoids for lung delivery with a novel approach to understanding the aerosol performance of nanoparticles

Extensive research has demonstrated the potential effectiveness of curcumin against various diseases, including asthma and cancers. However, few studies have used liquid-based vehicles in the preparation of curcumin formulations. Therefore, the current study proposed the use of nanoemulsion and microsuspension formulations to prepare nebulised curcuminoid for lung delivery. Furthermore, this work expressed a new approach to understanding the aerosol performance of nanoparticles compared to microsuspension formulations. The genotoxicity of the formulations was also assessed. Curcuminoid nanoemulsion formulations were prepared in three concentrations (100, 250 and 500 µg/ml) using limonene and oleic acid as oil phases, while microsuspension solutions were prepared by suspending curcuminoid particles in isotonic solution (saline solution) of 0.02% Tween 80. The average fine particle fraction (FPF) and mass median aerodynamic diameter (MMAD) of the nebulised microsuspension formulations ranged from 26% and 7.1 µm to 40% and 5.7 µm, for 1000 µg/ml and 100 µg/ml respectively. In a comparison of the low and high drug concentrations of the nebulised nanoemulsion, the average FPF and MMAD of the nebulised nanoemulsion formulations prepared with limonene oil ranged from 50% and 4.6 µm to 45% and 5.6 µm, respectively; whereas the FPF and MMAD of the nebulised nanoemulsion prepared with oleic acid oil ranged from 46% and 4.9 µm to 44% and 5.6 µm, respectively. The aerosol performance of the microsuspension formulations were concentration dependent, while the nanoemulsion formulations did not appear to be dependent on the curcuminoids concentration. The performance and genotoxicity results of the formulations suggest the suitability of these preparations for further inhalation studies in animals.

Phytoconstituent based dry powder inhalers as biomedicine for the management of pulmonary diseases

Pulmonary disease represents a major global health issue. They are commonly treated by various synthetic molecules. But, frequent high-dose of oral and injectable drugs may lead to severe side effects and this juncture demands inhaled formulations that facilitate effective drug delivery to the lower airways with negligible side effects. Natural phytoconstituents or phytoalexin (i.e. plant antibiotics) have showed an unique treatment array with minimum side effects and great capability to treat intrapulmonary and extrapulmonary diseases compared to synthetic drugs. Moreover, the progress of disciplines such as nanotechnology, material science and particle engineering allows further improvement of the treatment capability and efficiency. This article review and analyze literatures on inhaled phytoconstituents which were published in the last 10 years. Additionally, it will also offer the researcher with some basic background information for phytoconstituents profile, formulation requirements and drug delivery systems.

Pluronic-Based Mixed Polymeric Micelles Enhance the Therapeutic Potential of Curcumin

Curcumin is a naturally occurring constituent of turmeric that is a good substitute for synthetic medicines for the treatment of different diseases, due to its comparatively safer profile. However, there are certain shortcomings that limit its use as an ideal therapeutic agent. In order to overcome these drawbacks, we prepared novel curcumin-loaded mixed polymeric micelles using different biocompatible polymers by the thin-film hydration method. We investigated the critical micelle concentration and temperature, drug loading and encapsulation efficiency, and minimum inhibitory concentration by spectrophotometry. Surface morphology, stability, particle size, drug-polymer interaction, and physical state of the prepared formulations were investigated using scanning electron microscopy, zeta potential, particle size analyzer, Fourier-transform infrared spectroscopy, and X-ray diffraction, respectively. The drug loading and entrapment efficiency were significantly increased (P < 0.01) when curcumin was encapsulated with pluronic-based mixed polymeric micelles as compared to that of pluronic-based micelles alone. In vitro studies exhibited that pluronic-based mixed polymeric micelles significantly increased anticancer (P < 0.01), antimicrobial (P < 0.001), antioxidant (P < 0.001), and α-amylase inhibitory (P < 0.001) activities when compared to pure curcumin and/or pluronic-based micelles alone. These findings suggest that the formation of mixed polymeric micelles increases the stability and solubility of curcumin.

Self-assembled nanogel of cholesterol-bearing xyloglucan as a drug delivery nanocarrier

Xyloglucan (XG) is a multibranched polysaccharide consisting of a main chain β-1,4-glucan with xylose and galactose side chains. In this study, cholesterol-bearing XG (CHXG) was synthesized by the reaction of XG with cholesteryl N-(6-isocyanatohexyl) carbamate. The CHXG molecules self-assembled in water to form nanogels consisting of about 100 molecules of XG, and were characterized using light scattering and transmission electron microscopy. The number of cholesteryl groups per physical cross-linking site was estimated using a fluorescence quenching method. The resulting CHXG nanogels could be complexed with molecules of low molecular weight, such as iodine and paclitaxel, making the nanogels useful as drug carriers. The CHXG nanogels could also be specifically internalized by hepatocytes via the galactose receptors on their cell surface. CHXG self-assembled nanogels may be suitable as novel drug nanocarriers with galactose-specific targetability.

Enhanced oral bioavailability of acetylpuerarin by poly(lactide-co-glycolide) nanoparticles optimized using uniform design combined with response surface methodology

Acetylpuerarin (AP), an acetylated derivative of puerarin, shows brain-protective effects in animals. However, AP has low oral bioavailability because of its poor water solubility. The objective of this study was to design and develop poly(lactide-co-glycolide) (PLGA) nanoparticles (NPs) to enhance the oral bioavailability of AP. The NPs were prepared using a solvent diffusion method optimized via uniform design (UD) combined with response surface methodology (RSM) and characterized by their morphology, particle size, zeta (ζ)-potential, encapsulation efficiency (EE), drug loading (DL), and in vitro drug release. A pharmacokinetic study was conducted in Wistar rats administered a single oral dose of 30 mg/kg AP. The optimized NPs were spherical and uniform in shape, with an average particle size of 145.0 nm, a polydispersity index (PI) of 0.153, and a ζ-potential of −14.81 mV. The release of AP from the PLGA NPs showed an initial burst release followed by a sustained release, following Higuchi’s model. The EE and DL determined in the experiments were 90.51% and 17.07%, respectively. The area under the plasma concentration-time curve (AUC_0−∞) of AP-PLGA-NPs was 6,175.66±350.31 h ng/mL, which was 2.75 times greater than that obtained from an AP suspension. This study showed that PLGA NPs can significantly enhance the oral bioavailability of AP.