Characterization of rice starch-ι-carrageenan biodegradable edible film. Effect of stearic acid on the film properties

Effect of polydimethylsiloxane on the structure and barrier properties of starch/PBAT composite films

This study aimed to investigate the effects of polydimethylsiloxane (PDMS) with a low surface energy on the structure and physicochemical properties of starch/poly (butylene adipate-co-terephthalate) (PBAT) blown films. The film's appearance was not significantly changed after the addition of PDMS. Compared with the films without PDMS, the films with PDMS displayed a smoother surface. A 2% w/w PDMS addition resulted in the maximum mechanical properties (8.10 MPa of strength, 211.00% of modulus) and surface hydrophobicity (87°) of the films. By contrast, the film with 3% w/w PDMS showed the lowest light transmittance, water vapor (2.73 × 10-11 g·cm·cm2·s-1·Pa-1) and oxygen permeability (9.73 × 10-13·cm3·cm·cm-2·s-1·Pa-1), owing to the improved tightness of the matrix, which increased the zigzag path for molecules to pass through. Films with higher PDMS contents effectively extended the shelf life of packaged bananas and shiitake mushrooms, benefiting from the outstanding and appropriate barrier properties, according to principal component analysis results. Findings supported that high-content starch/PBAT films containing PDMS had potential in the preservation of fresh agricultural products.

Developmental prospects of carrageenan-based wound dressing films: Unveiling techno-functional properties and freeze-drying technology for the development of absorbent films - A review

This review explores the intricate wound healing process, emphasizing the critical role of dressing material selection, particularly for chronic wounds with high exudate levels. The aim is to tailor biodegradable dressings for comprehensive healing, focusing on maximizing moisture retention, a vital element for adequate recovery. Researchers are designing advanced wound dressings that enhance techno-functional and bioactive properties, minimizing healing time and ensuring cost-effective care. The study delves into wound dressing materials, highlighting carrageenan biocomposites superior attributes and potential in advancing wound care. Carrageenan's versatility in various biomedical applications demonstrates its potential for tissue repair, bone regeneration, and drug delivery. Ongoing research explores synergistic effects by combining carrageenan with other novel materials, aiming for complete biocompatibility. As innovative solutions emerge, carrageenan-based wound-healing medical devices are poised for global accessibility, addressing challenges associated with the complex wound-healing process. The exceptional physico-mechanical properties of carrageenan make it well-suited for highly exudating wounds, offering a promising avenue to revolutionize wound care through freeze-drying techniques. This thorough approach to evaluating the wound healing effectiveness of carrageenan-based films, particularly emphasizing the development potential of lyophilized films, has the potential to significantly improve the quality of life for patients receiving wound healing treatments.

Insights into recent innovations in barrier resistance of edible films for food packaging applications

The utilization of biopolymer-based food packaging holds significant promise in aligning with sustainability goals and enhancing food safety by offering a renewable, biodegradable, and safer alternative to traditional synthetic polymers. However, these biopolymer-derived films often exhibit poor barrier and mechanical properties, potentially limiting their commercial viability. Desirable barrier properties, such as moisture and oxygen resistance, are critical for preserving and maintaining the quality of packaged food products. This review comprehensively explores different traditional and advance methodologies employed to access the barrier properties of edible films. Additionally, this review thoroughly examines various approaches aimed at enhancing the barrier properties of edible films, such as the fabrication of multilayer films, the selection of biopolymers for composite films, as well as the integration of plasticizers, crosslinkers, hydrophobic agents, and nanocomposites. Moreover, the influence of process conditions, such as preparation techniques, homogenization, drying conditions, and rheological behavior, on the barrier properties of edible films has been discussed. The review provides valuable insights and knowledge for researchers and industry professionals to advance the use of biopolymer-based packaging materials and contribute to a more sustainable and food-safe future.

Fabrication and characterization of chitosan/anthocyanin intelligent packaging film fortified by cellulose nanocrystal for shrimp preservation and visual freshness monitoring

In this study, a multi-functional packaging film was fabricated, utilizing the natural polysaccharide chitosan (CS) as the base material, integrating natural blueberry anthocyanin (AN) as pH-responsive indicator, and reinforced with cellulose nanocrystals (CNCs). The implications of addition levels of CNCs on the characteristics of the films were systematically investigated, resulting in that CS-AN-CNCs 9 % film exhibited optimal performance. Specifically, the film showed a substantial enhancement in maximum tensile strength from 15 MPa to 35 MPa; On the other hand, the swelling degree properties, the oxygen permeability and water vapor permeability decreased from 159.2 % to 92.0 %, from 51.7 g/(m2d) to 12.2 g/(m2d), from 31.6 × 10-12 g/(m·s·Pa) to 1.6 × 10-12 g/(m·s·Pa), respectively. Moreover, the CS-AN-CNCs 9 % film exhibited antioxidant, antibacterial, coupled with a color metrically responsive to pH variations, displaying great potential in indicating the shrimp freshness and delaying spoilage. Another notable advantage of the-prepared packaging material lies in its completely biodegradability, therefore meeting the requirement of environmental protection. Therefore, the prepared CS-AN-CNCs film as an intelligent packaging solution with potential applications in food preservation and freshness monitoring applications.

Lipid incorporated biopolymer based edible films and coatings in food packaging: A review

In the evolving landscape of food packaging, lipid-based edible films and coatings are emerging as a sustainable and effective solution for enhancing food quality and prolonging shelf life. This critical review aims to offer a comprehensive overview of the functional properties, roles, and fabrication techniques associated with lipid-based materials in food packaging. It explores the unique advantages of lipids, including waxes, resins, and fatty acids, in providing effective water vapor, gas, and microbial barriers. When integrated with other biopolymers, such as proteins and polysaccharides, lipid-based composite films demonstrate superior thermal, mechanical, and barrier properties. The review also covers the application of these innovative coatings in preserving a wide range of fruits and vegetables, highlighting their role in reducing moisture loss, controlling respiration rates, and maintaining firmness. Furthermore, the safety aspects of lipid-based coatings are discussed to address consumer and regulatory concerns.

Zinc oxide nanoparticle-reinforced pectin/starch functionalized films: A sustainable solution for biodegradable packaging

Environmental pollution caused by non-biodegradable plastic pollutants adversely affects various ecosystems. This study proposes the development of novel functional and biodegradable films based on corn starch (CST) and pectin (PEC) containing zinc oxide nanoparticles (ZnONPs) from the casting method. The films exhibited processability, transparency, low water vapor permeation, and desirable mechanical properties for food packaging and coating applications. The ZnONPs acted as a plasticizer, enhancing the film elongation at the break, increasing the pec25-1 (PEC 25 wt% and ZnONPs 1 wt%) elongation from 79.85 to 162.32 %. The improved film elasticity supported by ZnONPs reduced the material stiffness. However, the films still demonstrated an average tensile strength (0.69 MPa) 17-fold higher than the tensile strength (0.04 MPa) of the non-biodegradable commercial film based on poly(vinyl chloride). Furthermore, the ZnONPs enhanced the UV-blocking capabilities of the films, leading to wettable materials with water contact angles lower than 90°. The films showed high biodegradation rates under natural disposal conditions. The results indicated that the pec25-1/ZnONPs film is a promising eco-friendly coating in food preservation due to its biodegradability, suitable mechanical properties, low water vapor permeability, and UV-blocking properties.

Highly Hydrophobic Gelatin Nanocomposite Film Assisted by Nano-ZnO/(3-Aminopropyl) Triethoxysilane/Stearic Acid Coating for Liquid Food Packaging

Biodegradable gelatin (G) food packaging films are in increasing demand as the substitution of petroleum-based preservative materials. However, G packaging films universally suffer from weak hydrophobicity in practical applications. Constructing a hydrophobic micro/nanocoating with low surface energy is an effective countermeasure. However, the poor compatibility with the hydrophilic G substrate often leads to the weak interfacial adhesion and poor durability of the hydrophobic coating. To overcome this obstacle, we used (3-aminopropyl) triethoxysilane (APS) as an interfacial bridging agent to prepare a highly hydrophobic, versatile G nanocomposite film. Specifically, tannic acid (TA)-modified nanohydroxyapatite (n-HA) particles (THA) were introduced in G matrix (G-THA) to improve the mechanical properties. Micro/nanostructure with low surface energy composed of nanozinc oxide (Nano-ZnO)/APS/stearic acid (SA) (NAS) was constructed on the surface of G-THA film (G-THA/NAS) through one-step spray treatment. Consequently, as-prepared G-THA/NAS film presented excellent mechanics (tensile strength: 7.6 MPa, elongation at break: 292.7%), water resistance ability (water contact angle: 150.4°), high UV-shielding (0% transmittance at 200 nm), degradability (100% degradation rate after buried in the natural soil for 15 days), antioxidant (78.8% of 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity), and antimicrobial (inhibition zone against Escherichia coli: 15.0 mm and Staphylococcus aureus: 16.5 mm) properties. It should be emphasized that the bridging function of APS significantly improves the interfacial adhesion ability of the NAS coating with more than 95% remaining area after the cross-cut adhesion test. Meanwhile, the G-THA/NAS film could maintain stable and long-lasting hydrophobic surfaces against UV radiation, high temperature, and abrasion. Based on these multifunctional properties, the G-THA/NAS film was successfully applied as a liquid packaging material. To sum up, we provide a feasible and effective method to prepare high-performance green packaging films.

Characterization of active Cerish fructan-sumac extract composite films: Physical, mechanical, and antioxidant properties

The biodegradable active films have the potential to increase the shelf life and safety of food products. In this study, the properties of Eremurus spectabilis (Cerish) root fructans (ESRF) film and its combination with Rhus coriaria L. (Sumac) extract (RCLE) at different concentrations (1%, 2%, 3%, and 4% w/w) were investigated. The Fourier transform infrared (FTIR) analysis determined the fingerprint region of fructans at 950-1150 cm^-1 in all spectrograms. RCLE increased the interactions between the hydroxyl groups and the formation of intermolecular bonds in composite films. Elongation-at-break (EAB) and tensile strength (TS) did not change significantly. However, RCLE increased Young's modulus (YM) (p ˂ .05), thermal stability, and crystallinity of composite films. RCLE also increased the film thickness and decreased the water content, solubility, and swelling degree significantly. RCLE improved the reducing ability and free radical-scavenging activity of composite films. Present results indicated that the ESRF/RCLE films were the protective barriers to the permeability of water vapor. The incorporation of RCLE increased the surface hydrophobicity and caused the composite film microstructure to become uniform and more compact. Overall, the Sumac extract at the specific concentration of 3% can be used to improve the Cerish fructans film properties and extend the product's shelf life in active food packaging.

Edible Film Casting Techniques and Materials and Their Utilization for Meat-Based Product Packaging

According to a profusion of academic studies on the use of organic materials or biopolymers as key components, the current trajectory of food packaging techniques is showing a positive inclination. Notably, one such biopolymer that has attracted much attention is edible film. The biopolymers that have been stated as constitutive components are composed of polysaccharides, lipids, proteins, or a combination of these, which work together to reinforce one another's properties and create homogenous mixtures. An edible film provides a clear, thin layer that encases foodstuffs, including their packaging. The production and use of edible film have recently been the focus of much research in the field of food polymers. Extending the shelf life of food goods is the goal of this research. Given their great susceptibility to change brought on by outside forces or pollutants, which may result in oxidative rancidity, the proper storage of nutrient-dense food items, particularly meat products, deserves careful study. Many edible films have been found to contain active ingredients, such antimicrobials or antioxidants, that can successfully prevent the spoiling of meat products, a process that can happen in a short amount of time. Surprisingly, a number of scholarly examinations reveal that edible film may be cooked alongside meat because of its organic makeup. We hope that the use of edible film will lead to a more environmentally responsible method of food packaging than has previously been possible.

Influence of Pomelo (Citrus maxima) Pericarp Essential Oil on the Physicochemical Properties of HomChaiya Rice (Oryza sativa L. cv. HomChaiya) Flour-Derived Edible Films

The food industry is increasingly interested in using active edible packaging to address environmental problems caused by conventional synthetic polymers, such as pollution and degradation. The present study took advantage of this opportunity to develop active edible packaging using Hom-Chaiya rice flour (RF), incorporating pomelo pericarp essential oil (PEO) at varying concentrations (1-3%). Films without PEO were used as controls. Various physicochemical parameters, structural and morphological observations were examined in the tested films. Overall, the results showed that the addition of PEO at varying concentrations significantly improved the qualities of the RF edible films, particularly the film's yellowness (b*) and total color. Furthermore, RF-PEO films with increased concentrations significantly reduced the film's roughness and relative crystallinity, while increasing opacity. The total moisture content in the films did not differ, but water activity was significantly reduced in the RF-PEO films. Water vapor barrier properties also improved in the RF-PEO films. In addition, textural properties, including tensile strength and elongation at break, were better in the RF-PEO films compared with the control. Fourier-transform infrared spectroscopy (FTIR) revealed strong bonding between the PEO and RF in the film. Morphological studies showed that the addition of PEO smoothed the film's surface, and this effect increased with concentration. Overall, the biodegradability of the tested films was effective, despite variations; however, a slight advancement in degradation was found in the control film. Lastly, the antimicrobial properties of the RF-PEO films exhibited excellent inhibitory effects against various pathogens, including Staphylococcus aureus (S. aureus), Listeria monocytogenes (L. monocytogenes), Escherichia coli (E. coli), and Salmonella typhimurium (S. typhimurium). This study demonstrated that RF and PEO could be an effective combination for developing active edible packaging that delivers desirable functional properties and excellent biodegradability.

Colorimetric and antioxidant films based on biodegradable polymers and black nightshade (Solanum nigrum L.) extract for visually monitoring Cyclina sinensis freshness

In this study, colorimetric and antioxidant films were developed by using cassava starch (CS), κ-carrageenan (KC) and black nightshade fruit anthocyanins (BNA), and their physical and functional properties were investigated. We found BNA presented significant color changes in different pH solutions. And incorporation of BNA significantly increased the tensile strength, water vapor permeability, UV-vis light barrier property, pH-sensitivity and antioxidant activity of CS-KC film. Results of structural characterization indicated that H-bonds were formed between CS, KC and BNA in films and the film compactness was significantly improved by BNA incorporation. Results of the rheological property assay showed the films had high apparent viscosity with an obvious shear-thinning behavior. When applied to monitoring the quality change of Cyclina sinensis, CS-KC-BNA films exhibited significant color changes with the degradation process of C. sinensis qualities. Our results suggested CS-KC-BNA films could be utilized in smart packaging in food industry.

Development of a Halochromic, Antimicrobial, and Antioxidant Starch-Based Film Containing Phenolic Extract from Jaboticaba Peel

In this study, the antioxidant, antimicrobial, mechanical, optical, and barrier attributes of Solanum lycocarpum starch bio-based edible films incorporated with a phenolic extract from jaboticaba peel were investigated. Aiming to determine the effect of the polymers and the phenolic extract on the properties of the films, a three-factor simplex-lattice design was employed, and the formulation optimization was based on the produced films' antioxidant potential. The optimized formulation of the starch-PEJP film showed a reddish-pink color with no cracks or bubbles and 91% antioxidant activity against DPPH radical. The optimized starch-PEJP film showed good transparency properties and a potent UV-blocking action, presenting color variation as a function of the pH values. The optimized film was also considerably resistant and highly flexible, showing a water vapor permeability of 3.28 × 10-6 g m-1 h-1 Pa-1. The microbial permeation test and antimicrobial evaluation demonstrated that the optimized starch-PEJP film avoided microbial contamination and was potent in reducing the growth of Escherichia coli, Staphylococcus aureus, and Salmonella spp. In summary, the active starch-PEJP film showed great potential as an environmentally friendly and halochromic material, presenting antioxidant and antimicrobial properties and high UV-protecting activity.

The physiochemical and photodynamic inactivation properties of corn starch/erythrosine B composite film and its application on pork preservation

This study explored the effect of erythrosine B (EB) as a photosensitizer in corn starch (CS) film and its physicochemical properties and photodynamic bacteriostatic ability against Staphylococcus aureus, Escherichia coli, and Salmonella both in vitro and inoculated on pork under the irradiation of D65 light-emitting diode (LED) (400-800 nm). The study revealed that the physiochemical properties of CS films: moisture content, water solubility, and water vapor transmission were improved with the addition of EB. In addition, the elasticity and the thermal stability of the film were enhanced. The results showed that the CS-EB films stimulated a maximum of 26.36 μg/mL hydrogen peroxide and 74.5 μg/g hydroxyl radical under irradiation. The CS composite films with a 5 % concentration of EB inhibited the bacterial growth by 4.7 Log CFU/mL in vitro after 30 min of illumination, and 2.4 Log CFU/mL on the pork samples under the same experimental condition. Moreover, the antibacterial ability was enhanced with the increase in EB concentration. Overall, the CS-EB composite films can inhibit the growth of bacteria through photodynamic inactivation and has the potential to become a new type of environmentally friendly packaging material.

Preparation and characterization of antioxidant and pH-sensitive films based on arrowhead (Sagittaria sagittifolia) starch, κ-carrageenan and black chokeberry (Aronia melanocarpa) extract for monitoring spoilage of chicken wings

In this study, we firstly developed an antioxidant and pH-sensitive film based on arrowhead starch (AS), κ-carrageenan (KC) and black chokeberry extract (BCE) and its physical and structural properties were investigated. We found BCE showed different colors in different pH solutions and incorporation with KC and BCE could significantly decrease light transmittance, increase thickness, elongation at break and pH-sensitive property of AS film. The results of structural property assay indicated that there were some intermolecular interactions between BCE and AS/KC in AS-KC-BCE films. Secondly, we investigated the rheological property of AS, AS-KC and AS-KC-BCE suspensions and found the suspensions showed an obvious shear-thinning behavior with high apparent viscosity. Finally, the functional properties of AS-KC-BCE films were investigated and AS-KC-BCE films showed strong scavenging activity on DPPH free radical and presented visible colour changes in response to the changes of the chicken wing qualities. The results suggest that AS-KC-BCE films can be used in active and intelligent packaging of food industry.

Recent progress in using zein nanoparticles-loaded nanocomposites for food packaging applications

Biopolymers are important due to their exceptional functional and barrier properties and also their non-toxicity and eco-friendly nature for various food, biomedical, and pharmaceutical applications. However, biopolymers usually need reinforcement strategies to address their poor mechanical, thermal, and physical properties as well as processability aspects. Several natural nanoparticles have been proposed as reinforcing agents for biopolymeric food packaging materials. Among them, zein nanoparticles (ZNPs) have attracted a lot of interest, being an environmentally friendly material. The purpose of the present review paper is to provide a comprehensive overview of the ZNPs-loaded nanocomposites for food packaging applications, starting from the synthesis, characteristics and properties of ZNPs, to the physicochemical properties of the ZNPs-loaded nanocomposites, in terms of morphology, permeability, solubility, optical features, hydrophobic/hydrophilic behavior, structural characteristics, thermal features, and mechanical attributes. Finally, at the end of this review, some considerations about the safety issues and gastrointestinal fate of ZNPs, as well as the use of ZNPs-based nanocomposites as food packaging, are reported, taking into account that, despite the enormous benefits, nanotechnology also presents some risks associated to the use of nanometric materials.

A Comprehensive Characterization of Biodegradable Edible Films Based on Potato Peel Starch Plasticized with Glycerol

Potatoes are a source of starch, which is an eco-friendly alternative to petrochemicals in plastic production. Increasing potato production also creates agricultural waste that could be converted to potato peel starch (PPS) and developed as films. A response surface method approach was employed to optimize the bioconversion of PPS (2, 4, and 6% w/v) and compared with carboxymethyl cellulose (CMC)-based films. The microstructure analysis of PPSF showed increased thickness, decreased swelling power, water solubility, and vapor permeability, which were linked to increased molecular interactions as a function of PPS increments. However, low-starch PPSF exhibited high transparency, good mechanical properties, and thermal stability (high melting temperature), pliability, and accelerated seawater and soil biodegradation (~90%: 20 and 50 days, respectively). All films exhibited thermal stability at >100 °C and retained similar amorphous characteristics, evidenced by their flexibility, which confirmed the potential use for PPS in packaging perishable and cooled foods.

Development of halochromic indicator film based on arrowroot starch/iota-carrageenan using Kyoho skin extract to monitor shrimp freshness

Increasing trends in food safety awareness drive consumer demands for fresher healthier diets and has led to the development of low-cost pH-sensitive indicator films to evaluate deterioration levels in fresh foods. Arrowroot starch/iota-carrageenan-based films were combined with 10, 30, 50% Kyoho skin extract (KSE) to produce indicator films with halochromic abilities. The KSE indicator films were characterized based on their physico-mechanical, functional, and crystallinity properties; thermal stability; and their pH-dependent color changes in in situ anthocyanin-based monitoring of shrimp freshness. All KSE indicator films displayed compact structure under scanning electron microscope analysis and increased tensile strength, exhibited UV-vis barrier ability, and presented low water wettability. Moreover, FTIR signaled strong hydrogen bond interactions among polymers and KSE that strengthened peak crystallinity in XRD analysis and lowered weight loss at melting temperature, which indicated thermal stability of the indicator films. Furthermore, pH-sensitivity of the indicator films integrated with natural KSE anthocyanin demonstrated color changes from purple to red under acidic conditions, purple to green in an ammonium environment, and yellow appeared in high alkaline conditions. Finally, this study demonstrated the food packaging and halochromic capacity of biopolymer-based pH-sensitivity of the KSE indicator films in real-time monitoring of shrimp at room storage temperatures.

Synthesis and Physicochemical Characterization of Polymer Film-Based Anthocyanin and Starch

Colorimetric indicators, used in food intelligent packaging, have enormous promise for monitoring and detecting food quality by analyzing and interpreting the quality data of packaged food. Hence, our study developed and characterized a biopolymer film based on starch and anthocyanin for prospective meat freshness monitoring applications. The developed film was morphologically characterized using different morphology instruments to identify the interaction between anthocyanin and starch. The color differences of the proposed film in response to different pH buffers have also been investigated. The combination of anthocyanin and starch produces a smooth and homogenous surface with an intermolecular hydrogen bond that increases the biopolymer's wavelength. The film indicated bright red at pH 2.0-6.0, bluish-grey at pH 7.0-11.0, and yellowish-green above 11.0 that the naked eye can see. The indicator film shows high sensitivity toward pH changes. The inclusion of anthocyanin increases the biopolymer film's thickness and crystalline condition with low humidity, water solubility, and swelling values. As a result, the polymer film can be employed in the food industry as an affordable and environmentally friendly indication of meat freshness.

Assessment of Antifungal Efficacy and Release Behavior of Fungicide-Loaded Chitosan-Carrageenan Nanoparticles against Phytopathogenic Fungi

Biopolymeric Chitosan-Carrageenan nanocomposites 66.6-231.82 nm in size containing the chemical fungicide mancozeb (nano CSCRG-M) were synthesized following a green chemistry approach. The physicochemical study of nanoparticles (NPs) was accomplished using a particle size analyzer, SEM and FTIR. TEM exhibited clover leaf-shaped nanoparticles (248.23 nm) with mancozeb on the inside and entrapped outside. Differential scanning calorimetry and TGA thermogravimetry exhibited the thermal behaviour of the nanoform. Nano CSCRG-1.5 at 1.5 ppm exhibited 83.1% inhibition against Alternaria solani in an in vitro study and performed as well as mancozeb (84.6%). Complete inhibition was exhibited in Sclerotinia sclerotiorum at 1.0 and 1.5 ppm with the nanoformulation. The in vivo disease control efficacy of mancozeb-loaded nanoparticles against A. solani in pathogenized plants was found to be relatively higher (79.4 ± 1.7) than that of commercial fungicide (76 ± 1.1%) in pot conditions. Nanomancozeb showed superior efficacy for plant growth parameters, such as germination percentage, root-shoot ratio and dry biomass. The nanoformulation showed higher cell viability compared to mancozeb in Vero cell cultures at 0.25 and 0.50 mg/mL in the resazurin assay. CSCRG-0.5 showed slow-release behavior up to 10 h. Thus, these green nano-based approaches may help combat soil and water pollution caused by harmful chemical pesticides.

Preparation and Characterization of Super-Absorbing Gel Formulated from κ-Carrageenan-Potato Peel Starch Blended Polymers

κ-carrageenan is useful for its superior gelling, hydrogel, and thickening properties. The purpose of the study was to maximize the hydrogel properties and water-absorbing capacity of κ-carrageenan by blending it with starch from potato peels to be used as safe and biodegradable water-absorbent children’s toys. The prepared materials were analyzed using FTIR and Raman spectroscopy to analyze the functional groups. Results showed that there was a shift in the characteristic peaks of starch and κ-carrageenan, which indicated their proper reaction during blend formation. In addition, samples show a peak at 1220 cm⁻¹ corresponding to the ester sulfate groups, and at 1670 cm⁻¹ due to the carbonyl group contained in D-galactose. SEM micrographs showed the presence of rough surface topology after blending the two polymers, with the appearance of small pores. In addition, the presence of surface cracks indicates the biodegradability of the prepared membranes that would result after enzymatic treatment. These results are supported by surface roughness results that show the surface of the κ-carrageenan/starch membranes became rougher after enzymatic treatment. The hydrophilicity of the prepared membranes was evaluated from contact angle (CA) measurements and the swelling ratio. The swelling ratio of the prepared membranes increased gradually as the starch ratio increased, reaching 150%, while the water-uptake capacity increased from 48 ± 4% for plain κ-carrageenan to 150 ± 5% for 1:2 κ-carrageenan/starch blends. The amylase enzyme showed an effective ability to degrade both the plain κ-carrageenan and κ-carrageenan/starch membranes, and release glucose units for up to 236 and 563, respectively. According to these results, these blends could be effectively used in making safe and biodegradable molded toys with superior water-absorbing capabilities.

Enhancing the functional properties of rice starch through biopolymer blending for industrial applications: A review

Rice starch has been used in various agri-food products due to its hypoallergenic properties. However, rice starch has poor solubility, lower resistant starch content with reduced retrogradation and poor functional properties. Hence, its industrial applications are rather limited. The lack of comprehensive information and a holistic understanding of the interaction between rice starch and endo/exogenous constituents to improve physico-chemical properties is a prerequisite in designing industrial products with enhanced functional attributes. In this comprehensive review, we highlight the potentials of physically mixing of biopolymers in upgrading the functional characteristics of rice starch as a raw material for industrial applications. Specifically, this review tackles rice starch modifications by adding natural/synthetic polymers and plasticizers, leading to functional blends or composites in developing sustainable packaging materials, pharma- and nutraceutical products. Moreover, a brief discussion on rice starch chemical and genetic modifications to alter starch quality for the deployment of rice starch industrial application is also highlighted.

Characterization of a natural biodegradable edible film obtained from arrowroot starch and iota-carrageenan and application in food packaging

Future food packaging trends are shifting to natural and eco-friendly materials developed from biopolymers such as starch and other hydrocolloids, to reduce pollution from synthetic polymers. Arrowroot starch (AS) (3.5, 3, 2.5, and 2%) and iota-carrageenan (IC) (0.5, 1, 1.5, and 2%) were blended to develop biodegradable edible films (AS/IC-BEF), which were compared against AS-BEF (4%, control). All films were characterized based on their physico-mechanical and barrier properties, functional group properties, crystallinity properties, thermal properties, and soil and seawater biodegradation. AS-BEF exhibited smooth surface, high transparency, and completed composting soil biodegradation in 7 days whereas AS/IC-BEF samples exhibited higher tensile strength, water solubility, swelling properties, and barrier properties, but completed biodegradation after 30 days. XRD analysis indicated IC fractions contributed to increase in degree of crystallinity (28.35°) and FTIR signaled strong hydrogen bond interactions between polymers. AS/IC-BEF samples demonstrated melting temperatures between 158 and 190 °C while glass transition temperatures ranged from 153 to 176 °C, which resulted in maximum weight loss around 50-55% at melting temperatures. Finally, AS/IC-BEF samples successfully inhibited weight loss of cherry tomatoes at room temperature and extended their shelf life to 10 days, which indicated that the AS/IC composite material produced a BEF with potential food and industrial applications.

Preparation and characterization of a novel biodegradable film based on sulfated polysaccharide extracted from seaweed Ulva intestinalis

Seaweeds can be a suitable, inexpensive, abundant, and renewable source for the production of biodegradable films as an alternative to plastics. Sulfated polysaccharides, which are abundant in Ulva intestinalis seaweed, have shown important biological activities such as anticoagulant, antioxidant, antitumor, anti-inflammatory, and antiviral activities. Mechanical, physicochemical, barrier, and surface properties of sulfated polysaccharide films extracted from Ulva intestinalis using glycerol and polyethylene glycol (PEG) as plasticizers were studied. Ulva intestinalis sulfated polysaccharide films (USP films) were successfully prepared by the incorporation of three concentrations of plasticizers (30, 40, and 50%). The film properties depended on the type and concentration of the plasticizer. Based on the results, by increasing the concentration of the plasticizer, the thickness, moisture content, solubility, and elongation at break of the USP films increased and tensile strength, young's modulus, transparency, and barrier properties of the films decreased. The film plasticized with 30% PEG showed the highest value of tensile strength (36.95 MPa), and the lowest value for permeability to vapor water and oxygen were 1.9 g mm-1 s-1kPa-1 × 10-11 and 7.45 cm-3.cm/cm2.s.cmHg ×10-8, respectively. Scanning electron microscopy (SEM) observations indicated that the surface of the films was free of bubbles, cracks, or fractures. Fourier transform infrared (FTIR) spectroscopy results revealed some interactions between plasticizers and the polymer.

Enhanced multi functionality of semi-refined iota carrageenan as food packaging material by incorporating SiO2 and ZnO nanoparticles

This paper reports the incorporation of SiO2-ZnO nanoparticles (NPs) into semi-refined iota carrageenan-based (SRIC) film as active food packaging. The dispersion of the nanoparticles was performed using a bead milling method and the films were prepared using the solution casting method. The incorporation of SiO2-ZnO NPs into SRIC films aims to provide multifunctional food packaging with enhanced water vapor barrier properties, UV-screening, and antimicrobial activity. The effect of the incorporation of SiO2 NPs, ZnO NPs, and the mixtures of SiO2-ZnO NPs varied in SiO2/ZnO ratios (SiO2-ZnO 1:1, 1:2, and 1:3) were investigated. The results showed that the tensile strength, water vapor barrier performance, UV-screening, and antimicrobial activity of the SRIC film were increased by the addition of either SiO2 or ZnO NPs alone. Interestingly, when the mixtures of SiO2-ZnO were incorporated, more significant improvement was observed. Also, the bio-degradability and solubility of all the SRIC films were confirmed. It was concluded that the SiO2-ZnO NPs incorporated into SRIC film provided multifunctional activities and acted as a promising active food packaging material.

Preparation and characterization of edible films from starch nanoparticles and chitosan

This study aimed to investigate the properties of edible films derived from the biocomposites of starch nanoparticles (SNPs) and chitosan. Chitosan was prepared in concentrations of 1.5, 2.0 and 3.0 wt%. The SNPs and film properties were investigated. The functional group of SNPs and chitosan as the edible film was evaluated. Then, the morphological structure, mechanical properties, thermal behavior and contact angles of the obtained films were also investigated. The data were subjected to a general linear model, and analysis of variance was carried out by using the SPSS version 23 software. The results from the research demonstrated that the solubility in water and the degree of swelling increased after the utilization of SNPs. Additionally, there was less tensile strength and higher elongation after the use of SNPs. Scanning electron microscopy analysis exhibited a smoother surface, and there was no formation of cracks when the starch transformed into nanoparticles. However, the addition of chitosan in SNPGC resulted in a grainy structure with irregularity on the surface of the films. Chitosan enhanced the degree of contact angles to 70.65 ± 2.90°, indicating an increase in the hydrophobicity of the films. This research suggested that the biocomposite films derived from SNPs–chitosan showed better performance.