Improving special hydrolysis characterization into Talaromyces thermophilus F1208 xylanase by engineering of N-terminal extension and site-directed mutagenesis in C-terminal

Advances in the understanding of the production, modification and applications of xylanases in the food industry

Xylanases have broad applications in the food industry to decompose the complex carbohydrate xylan. This is applicable to enhance juice clarity, improve dough softness, or reduce beer turbidity. It can also be used to produce prebiotics and increase the nutritional value in foodstuff. However, the low yield and poor stability of most natural xylanases hinders their further applications. Therefore, it is imperative to explore higher-quality xylanases to address the potential challenges that appear in the food industry and to comprehensively improve the production, modification, and utilization of xylanases. Xylanases, due to their various sources, exhibit diverse characteristics that affect production and activity. Most fungi are suitable for solid-state fermentation to produce xylanases, but in liquid fermentation, microbial metabolism is more vigorous, resulting in higher yield. Fungi produce higher xylanase activity, but bacterial xylanases perform better than fungal ones under certain extreme conditions (high temperature, extreme pH). Gene and protein engineering technology helps to improve the production efficiency of xylanases and enhances their thermal stability and catalytic properties.

Improving the inhibitory resistance of xylanase FgXyn11C from Fusarium graminearum to SyXIP-I by site-directed mutagenesis

The aim of this study was to improve the inhibitory resistance of xylanase FgXyn11C from Fusarium graminearum to XIP in cereal flour. Site saturation mutagenesis was performed using computer-aided redesign. Firstly, based on multiple primary structure alignments, the amino acid residues in the active site architecture were identified, and specific residue T144 in the thumb region of FgXyn11C was selected for site-saturation mutagenesis. After screening, FgXyn11CT144F was selected as the best mutant, as it displayed the highest enzymatic activity and resistance simultaneously compared to other mutants. The specific activity of FgXyn11CT144F was 208.8 U/mg and it exhibited complete resistance to SyXIP-I. Compared with the wild-type, FgXyn11CT144F displayed similar activity and the most resistant against SyXIP-I. The optimal temperature and pH of the wild-type and purified FgXyn11CT144F were similar at pH 5.0 and 30 °C. Our findings provided preliminary insight into how the specific residue at position 144 in the thumb region of FgXyn11C influenced the enzymatic properties and interacted with SyXIP-I. The inhibition sensitivity of FgXyn11C was reduced through directed evolution, leading to creation of the mutant enzyme FgXyn11CT144F. The FgXyn11CT144F resistance to SyXIP-I has potential application and can also provide references for engineering other resistant xylanases of the GHF11.

Improvement of thermostability and catalytic efficiency of xylanase from Myceliophthora thermophilar by N-terminal and C-terminal truncation

Introduction

Extracting xylanase from thermophilic filamentous fungi is a feasible way to obtain xylanase with good thermal stability.

Methods

The transcriptomic data of Myceliophthora thermophilic destructive ATCC42464 were differentially expressed and enriched. By comparing the sequences of Mtxylan2 and more than 10 xylanases, the N-terminal and C-terminal of Mtxylan2 were truncated, and three mutants 28N, 28C and 28NC were constructed.

Results and discussion

GH11 xylan Mtxylan2 was identified by transcriptomic analysis, the specific enzyme activity of Mtxylan2 was 104.67 U/mg, and the optimal temperature was 65°C. Molecular modification of Mtxylan2 showed that the catalytic activity of the mutants was enhanced. Among them, the catalytic activity of 28C was increased by 9.3 times, the optimal temperature was increased by 5°C, and the residual enzyme activity remained above 80% after 30 min at 50-65°C, indicating that redundant C-terminal truncation can improve the thermal stability and catalytic performance of GH11 xylanase.

Simultaneously Enhanced Thermostability and Catalytic Activity of Xylanase from Streptomyces rameus L2001 by Rigidifying Flexible Regions in Loop Regions of the N-Terminus

The GH11 xylanase XynA from Streptomyces rameus L2001 has favorable hydrolytic properties. However, its poor thermal stability hinders its widespread application in industry. In this study, mutants Mut1 and Mut2 were constructed by rationally combining the mutations 11YHDGYF16, 23AP24/23SP24, and 32GP33. The residual enzyme activity of these combinational mutants was more than 85% when incubated at 80 and 90 °C for 12 h, and thus are the most thermotolerant xylanases known to date. The reduced flexibility of the N-terminus, increased overall rigidity, as well as the surface net charge of Mut1 and Mut2 may be partially responsible for the improved thermal stability. In addition, the specific activity and catalytic efficiency of Mut1 and Mut2 were improved compared with those of wild-type XynA. The broader catalytic cleft and enhanced flexibility of the "thumb" of Mut1 and Mut2 may be partially responsible for the improved specific activity and catalytic efficiency.

Three Molecular Modification Strategies to Improve the Thermostability of Xylanase XynA from Streptomyces rameus L2001

Glycoside hydrolase family 11 (GH11) xylanases are the preferred candidates for the production of functional oligosaccharides. However, the low thermostability of natural GH11 xylanases limits their industrial applications. In this study, we investigated the following three strategies to modify the thermostability of xylanase XynA from Streptomyces rameus L2001 mutation to reduce surface entropy, intramolecular disulfide bond construction, and molecular cyclization. Changes in the thermostability of XynA mutants were analyzed using molecular simulations. All mutants showed improved thermostability and catalytic efficiency compared with XynA, except for molecular cyclization. The residual activities of high-entropy amino acid-replacement mutants Q24A and K104A increased from 18.70% to more than 41.23% when kept at 65 °C for 30 min. The catalytic efficiencies of Q24A and K143A increased to 129.99 and 92.26 mL/s/mg, respectively, compared with XynA (62.97 mL/s/mg) when using beechwood xylan as the substrate. The mutant enzyme with disulfide bonds formed between Val3 and Thr30 increased the t_1/2^{60 °C} by 13.33-fold and the catalytic efficiency by 1.80-fold compared with the wild-type XynA. The high thermostabilities and hydrolytic activities of XynA mutants will be useful for enzymatic production of functional xylo-oligosaccharides.

Structural and biochemical analysis reveals how ferulic acid improves catalytic efficiency of Humicola grisea xylanase

Humicolagrisea var. thermoidea is an aerobic and thermophilic fungus that secretes the GH11 xylanase HXYN2 in the presence of sugarcane bagasse. In this study, HXYN2 was expressed in Pichiapastoris and characterized biochemically and structurally in the presence of beechwood xylan substrate and ferulic acid (FA). HXYN2 is a thermally stable protein, as indicated by circular dichroism, with greater activity in the range of 40–50 °C and pH 5.0–9.0, with optimal temperature and pH of 50 °C and 6.0, respectively. FA resulted in a 75% increase in enzyme activity and a 2.5-fold increase in catalytic velocity, catalytic efficiency, and catalytic rate constant (k_cat), with no alteration in enzyme affinity for the substrate. Fluorescence quenching indicated that FA forms a complex with HXYN2 interacting with solvent-exposed tryptophan residues. The binding constants ranged from moderate (pH 7.0 and 9.0) to strong (pH 4.0) affinity. Isothermal titration calorimetry, structural models and molecular docking suggested that hydrogen bonds and hydrophobic interactions occur in the aglycone region inducing conformational changes in the active site driven by initial and final enthalpy- and entropy processes, respectively. These results indicate a potential for biotechnological application for HXYN2, such as in the bioconversion of plant residues rich in ferulic acid.

The Emergence of New Catalytic Abilities in an Endoxylanase from Family GH10 by Removing an Intrinsically Disordered Region

Endoxylanases belonging to family 10 of the glycoside hydrolases (GH10) are versatile in the use of different substrates. Thus, an understanding of the molecular mechanisms underlying substrate specificities could be very useful in the engineering of GH10 endoxylanases for biotechnological purposes. Herein, we analyzed XynA, an endoxylanase that contains a (β/α)₈-barrel domain and an intrinsically disordered region (IDR) of 29 amino acids at its amino end. Enzyme activity assays revealed that the elimination of the IDR resulted in a mutant enzyme (XynAΔ29) in which two new activities emerged: the ability to release xylose from xylan, and the ability to hydrolyze p-nitrophenyl-β-d-xylopyranoside (pNPXyl), a substrate that wild-type enzyme cannot hydrolyze. Circular dichroism and tryptophan fluorescence quenching by acrylamide showed changes in secondary structure and increased flexibility of XynAΔ29. Molecular dynamics simulations revealed that the emergence of the pNPXyl-hydrolyzing activity correlated with a dynamic behavior not previously observed in GH10 endoxylanases: a hinge-bending motion of two symmetric regions within the (β/α)₈-barrel domain, whose hinge point is the active cleft. The hinge-bending motion is more intense in XynAΔ29 than in XynA and promotes the formation of a wider active site that allows the accommodation and hydrolysis of pNPXyl. Our results open new avenues for the study of the relationship between IDRs, dynamics and activity of endoxylanases, and other enzymes containing (β/α)₈-barrel domain.

Sequence- and structure-guided improvement of the catalytic performance of a GH11 family xylanase from Bacillus subtilis

Xylanases produce xylooligosaccharides from xylan and have thus attracted increasing attention for their usefulness in industrial applications. Previously, we demonstrated that the GH11 xylanase XynLC9 from Bacillus subtilis formed xylobiose and xylotriose as the major products with negligible production of xylose when digesting corncob-extracted xylan. Here, we aimed to improve the catalytic performance of XynLC9 via protein engineering. Based on the sequence and structural comparisons of XynLC9 with the xylanases Xyn2 from Trichoderma reesei and Xyn11A from Thermobifida fusca, we identified the N-terminal residues 5-YWQN-8 in XynLC9 as engineering hotspots and subjected this sequence to site saturation and iterative mutagenesis. The mutants W6F/Q7H and N8Y possessed a 2.6- and 1.8-fold higher catalytic activity than XynLC9, respectively, and both mutants were also more thermostable. Kinetic measurements suggested that W6F/Q7H and N8Y had lower substrate affinity, but a higher turnover rate (k_cat), which resulted in increased catalytic efficiency than WT XynLC9. Furthermore, the W6F/Q7H mutant displayed a 160% increase in the yield of xylooligosaccharides from corncob-extracted xylan. Molecular dynamics simulations revealed that the W6F/Q7H and N8Y mutations led to an enlarged volume and surface area of the active site cleft, which provided more space for substrate entry and product release and thus accelerated the catalytic activity of the enzyme. The molecular evolution approach adopted in this study provides the design of a library of sequences that captures functional diversity in a limited number of protein variants.

Effect of N-terminal modification on the mode of action between the Xyn11A and Xylotetraose

The purpose of this study was to gain an insight into the effects of mutation-induced binding pocket tilting of the Xyn11A xylanase from Bacillus firmus K-1 in producing a unique hydrolysis characteristic. In this study, the wildtype Xyn11A and its K40L mutant were compared for their hydrolysis patterns on beechwood xylan and xylooligosaccharides of sizes 2 to 6. According to our thin-layer chromatography experiment, the K40L mutant produced a larger amount of xylotetraose leftover than the wildtype. Kinetic determination of the WT and K40L mutant suggested that the higher X4 leftover on TLC was reflected in the decreasing catalytic efficiency (k_cat/K_m) between enzyme and X4. The mechanisms underlying this efficiency loss were examined through atomistic molecular dynamics (MD) simulations. The MD trajectory analysis showed that the mutation-induced binding pocket tilting resulted in an additional hydrophobic contact between the reducing end of X4 and Trp128. Meanwhile, the interactions between the non-reducing end and the Arg112 residue near the active site became lost, which could decrease the catalytic efficiency. This work suggested that the protein engineering to fine-tune the hydrolysis pattern for some desired xylooligosaccharide products was possible.

Purification, characterization and partial amino acid sequences of thermo-alkali-stable and mercury ion-tolerant xylanase from Thermomyces dupontii KKU-CLD-E2-3

We investigated the properties of the low molecular weight thermo-alkali-stable and mercury ion-tolerant xylanase production from Thermomyces dupontii KKU-CLD-E2-3. The xylanase was purified to homogeneity by ammonium sulfate, Sephadex G-100 and DEAE-cellulose column chromatography which resulted 27.92-fold purification specific activity of 56.19 U/mg protein and a recovery yield of 2.01%. The purified xylanase showed a molecular weight of 25 kDa by SDS-PAGE and the partial peptide sequence showed maximum sequence homology to the endo-1,4-β-xylanase. The optimum temperature and pH for its activity were 80 °C and pH 9.0, respectively. Furthermore, the purified xylanase can maintain more than 75% of the original activity in pH range of 7.0-10.0 after incubation at 4 °C for 24 h, and can still maintain more than 70% of original activity after incubating at 70 °C for 90 min. Our purified xylanase was activated by Cu2+ and Hg2+ up to 277% and 235% of initial activity, respectively but inhibited by Co2+, Ag+ and SDS at a concentration of 5 mM. The Km and Vmax values of beechwood xylan were 3.38 mg/mL and 625 µmol/min/mg, respectively. Furthermore, our xylanase had activity specifically to xylan-containing substrates and hydrolyzed beechwood xylan, and the end products mainly were xylotetraose and xylobiose. The results suggested that our purified xylanase has potential to use for pulp bleaching in the pulp and paper industry.

Mutagenesis of N-terminal residues confer thermostability on a Penicillium janthinellum MA21601 xylanase

BACKGROUND

A mesophilic xylanase PjxA from Penicillium janthinellum MA21601 has high specific activity under acidic condition and holds great potential for applications in the animal feed industry. To enhance the thermostability of xylanase PjxA, two mutation strategies in the N-terminal region were examined and then integrated into the xylanase to further improvement. The recombinant xylanase PTxA-DB (The meaning of DB is disulfide-bridge.) was constructed by replacement of five residues in the mutated region in TfxA (T10Y, N11H, N12D, Y15F, N30 L), combined with an additional disulfide bridge in the N-terminal region.

RESULTS

The T_m value of mutant PTxA-DB was improved from 21.3 °C to 76.6 °C, and its half-life was found to be 53.6 min at 60 °C, 107-fold higher than the wild type strain. The location of the disulfide bridge (T2C-T29C) was between the irregular loop and the β-strand A2, accounting for most of the improvement in thermostability of PjxA. Further analysis indicated T2C, T29C, N30 L and Y15F lead to increase N-terminal hydrophobicity. Moreover, the specific activity and substrate affinity of PTxA-DB were also enhanced under the acidic pH values.

CONCLUSIONS

These results indicated PTxA-DB could be a prospective additive to industrial animal feeds.

GH-10 and GH-11 Endo-1,4-β-xylanase enzymes from Kitasatospora sp. produce xylose and xylooligosaccharides from sugarcane bagasse with no xylose inhibition

A novel strategy for the low-cost, high-yield co-production of xylose and xylooligosaccharides together with no xylose inhibition was developed using a novel heterologous expression of XYN10Ks_480 endo-1,4-β-xylanase with a ricin-type β-trefoil type of domain and XYN11Ks_480 endo-1,4-β-xylanase with a CBM 2 superfamily from the Kitasatospora sp in an actinomycetes expression system. Xylose is the main building block for hemicellulose xylan. Our findings demonstrated high levels of expression and catalytic activity for XYN10Ks_480 during hydrolysis of the extracted xylan of bagasse, and three types of xylan-based substrates were used to produce xylose and xylooligosaccharides. However, hydrolysis by XYN11Ks_480 produced xylooligosaccharides without xylose formation. This study demonstrated how integrating sodium hypochlorite-extracted xylan and enzymatic hydrolysis could provide an alternative strategy for the generation of XOS from lignocellulosic material.

Effect of disulfide bridge on hydrolytic characteristics of xylanase from Penicillium janthinellum

Highly efficient and stable enzymes are required for application in biotechnology, to meet the technical, environmental, and economic industrial demands. Xylanases are hemicellulolytic enzymes that degrade the heteroxylan constituent of the lignocellulosic plant cell wall. In this study, an acidic xylanase designated Pjxyn (pH 4.0) from Penicillium janthinellum was engineered by the introduction of a disulfide bridge. This strategy exploited the influence of the bridge on hydrolysis characteristics and enhanced hydrolysis was achieved. Three mutants [PjxynS(27)S(39), PjxynS(27)S(186), and PjxynS(39)S(186)] produced more xylose and xylobiose as hydrolysis products compared with the wild-type Pjxyn, when commercial xylans and lab-prepared water-insoluble corncob-xylan were used as the substrates, especial for the PjxynS(27)S(39) mutant, the content of xylose and xylobiose was 87.62% (using beechwood xylan) and 69.91% (using oat-spelt xylan) higher than that in the hydrolysis products of Pjxyn. Moreover, each mutant combined with the xylanase mutant T-XynFM effectively decreased the production of xylose with an optimum xylobiose yield. The findings demonstrate the potential industrial value of engineering xylanase to improve its hydrolytic properties and thermostability.

Engineering a xylanase from Streptomyce rochei L10904 by mutation to improve its catalytic characteristics

Protein engineering was performed by N-terminal region replacement and site-directed mutagenesis in the cord of a xylanase (Srxyn) from Streptomyce rochei L10904 to improve its catalytic characteristics. Three mutants SrxynF, SrxynM and SrxynFM displayed 2.1-fold, 3.2-fold and 5.3-fold higher specific activities than that of Srxyn, respectively. Moreover, all of the mutants showed greater substrate affinity and k_cat/K_m than the native Srxyn. In addition, the enzymes showed improved hydrolysis characteristics, of which the most noteworthy is the enhanced ability of producing xylobiose (X2) and xylotriose (X3) from polymeric substrates. The engineered xylanases have greater potential for applications in oligosaccharide preparation industry.