Synthesis of 2-alkenyl-3-butoxypropyl guar gum with enhanced rheological properties

Stretchable Semi-Interpenetrating Carboxymethyl Guar Gum-Based Composite Hydrogel for Moisture-Proof Wearable Strain Sensor

Wearable strain sensors of conductive hydrogels have very broad application prospects in electronic skins and human-machine interfaces. However, conductive hydrogels suffer from unstable signal transmission due to environmental humidity and inherent shortcomings of their materials. Herein, we introduce a novel moisture-proof conductive hydrogel with high toughness (2.89 MJ m-3), mechanical strength (1.00 MPa), and high moisture-proof sensing performance by using dopamine-functionalized gold nanoparticles as conductive fillers into carboxymethyl guar gum and acrylamide. Moreover, the hydrogel can realize real-time monitoring of major and subtle human movements with good sensitivity and repeatability. In addition, the hydrogel-assembled strain sensor exhibits stable sensing signals after being left for 1 h, and the relative resistance change rate under different strains (25-300%) shows no obvious noise signal up to 99% relative humidity. Notably, the wearable strain sensing is suitable for wearable sensor devices with high relative humidity.

Influence of organoboron cross-linker and reservoir characteristics on filtration and reservoir residual of guar gum fracturing fluid in low-permeability shale gas reservoirs

To effectively reduce the filtration rate of water-based fracturing fluid and promote the pressure holding effect of fracturing fluid in underground unconventional reservoirs, an efficient and clean organic-boron cross-linker was synthesized with boric acid and low alcohols. The results obtained that the synthesized organoboron cross-linker exhibits better fluid loss performance to water-based fracturing fluid than the commercially available cross-linker. This organoboron cross-linker allowed decreasing filtration coefficient more than 0.74 × 10^-2 m³·min^1/2 as a result of the network structure formed by the organoboron cross-linker and guar gum molecule. However, commercially available cross-linker exhibits a relatively large filtered mass of water more than 1.33 × 10^-2 m³·min^1/2 at the same condition. Meanwhile, the cross-linked guar gum fracturing fluid can significantly improve the fluid loss property with the increase of cross-linker content and pressure, and an increased fluid filtration gradually was revealed with increasing the reservoir temperature and current speed. Moreover, the damage of shale reservoir caused by the prepared boron cross-linker was only 11%, which was lower than 18% of the commercial boron cross-linker under the same conditions.

A novel hydrogel based on Bletilla striata polysaccharide for rapid hemostasis: Synthesis, characterization and evaluation

The purpose of this study is to develop a new polysaccharide-based hydrogel. The Box-Behnken design was used to optimize the optimal synthesis conditions of the hydrogel, with the swelling parameters as indicators. The findings of rheologic tests confirm that free radical polymerization and the introduction of linear polymers improved the mechanical strength of the hydrogel. Combined with the characterization results, the gel mechanism of BSP-g-PAA/PVA DN hydrogel was proposed. The intermolecular association and entanglement increase, which effectively dissipates energy, thereby enhancing the mechanical properties of the hydrogel. In vitro blood compatibility experiments show that DN hydrogel has a low hemolysis rate and a good coagulation effect. The material is non-cytotoxic to L929 cells. The hepatic haemorrhage and mouse-tail amputation models of rats and mice were used to further evaluate the in vivo wound sealing and hemostatic properties of the hydrogel. The blood loss and hemostatic time were significantly lower than those of the control group, indicating that the hydrogel has excellent hemostatic effects. Therefore, the obtained BSP-g-PAA/PVA DN network hydrogel has good comprehensive properties and is expected to be used as a hemostatic material or a precursor of a drug carrier and a tissue engineering scaffold.

Recent Progress in Chemical Modification of the Natural Polysaccharide Guar Gum

Guar gum (GG) is a natural heteropolysaccharide. Due to its non-toxic, eco-friendly, and biodegradable nature, GG has found wide applications in many areas, in particular food, paper, textile, petroleum, and pharmaceutical industries. Therefore, GG is often called "Black Gold" as well. Due to the presence of hydroxyl groups, GG can be modified by various methods. The physical and biological properties of GG can be modulated by chemical modifications. In this manuscript, various methods for the chemical modifications of GG have been discussed according to the type of modifications. Mechanistic insights have also been provided whenever possible. In addition, potential applications of new GG derivatives have also been briefly mentioned.

Naturally Occurring Polyelectrolytes and Their Use for the Development of Complex-Based Mucoadhesive Drug Delivery Systems: An Overview

Biopolymers have several advantages for the development of drug delivery systems, since they are biocompatible, biodegradable and easy to obtain from renewable resources. However, their most notable advantage may be their ability to adhere to biological tissues. Many of these biopolymers have ionized forms, known as polyelectrolytes. When combined, polyelectrolytes with opposite charges spontaneously form polyelectrolyte complexes or multilayers, which have great functional versatility. Although only one natural polycation-chitosan has been widely explored until now, it has been combined with many natural polyanions such as pectin, alginate and xanthan gum, among others. These polyelectrolyte complexes have been used to develop multiple mucoadhesive dosage forms such as hydrogels, tablets, microparticles, and films, which have demonstrated extraordinary potential to administer drugs by the ocular, nasal, buccal, oral, and vaginal routes, improving both local and systemic treatments. The advantages observed for these formulations include the increased bioavailability or residence time of the formulation in the administration zone, and the avoidance of invasive administration routes, leading to greater therapeutic compliance.

Improvement of anti-washout property of calcium phosphate cement by addition of konjac glucomannan and guar gum

The inferior anti-washout property of injectable calcium phosphate cement (CPC) limits its wider application in clinic. In this study, the improvement of anti-washout performance of CPC by addition of konjac glucomannan or guar gum, which was dissolved in the CPC liquid, was first studied. The influence of KGM/GG blend with different mass ratios on the anti-washout property, compressive strength and in vitro cytocompatibility of CPC was estimated. The results revealed that small amount of KGM or GG could obviously enhance the anti-washout property of CPC. Moreover, the washout resistance efficiency of KGM/GG blend was better than KGM or GG alone. The addition of KGM/GG blend slightly shortened the final setting time of CPC. Although the introduction of KGM/GG blend reduced the compressive strength of CPC, the compressive strength still reached or surpassed that of human cancellous bone. The best KGM/GG mass ratio was 5:5, which was most efficient at not only reducing CPC disintegration, but also increasing compressive strength. The addition of KGM/GG blend obviously promoted the cells proliferation on the CPC. In short, the CPC modified by KGM/GG blend exhibited excellent anti-washout property, appropriate setting time, adequate compressive strength, and good cytocompatibility, and has the potential to be used in bone defect repair. The addition of KGM/GG blend significantly improved the anti-washout property of CPC. The best KGM/GG mass ratio was 5:5, which was most efficient in reducing the CPC disintegration.

Guar Gum-Grafted Terpolymer Hydrogels for Ligand-Selective Individual and Synergistic Adsorption: Effect of Comonomer Composition

Grafting of guar gum (GG) and in situ strategic attachment of acrylamidosodiumpropanoate (ASP) via solution polymerization of acrylamide (AM) and sodium acrylate (SA) resulted in the synthesis of a sustainable GG-g-(AM-co-SA-co-ASP)/GGAMSAASP interpenetrating polymer network (IPN)-based smart superadsorbent with excellent physicochemical properties and reusability, through systematic optimization by response surface methodology (RSM) for removal of methyl violet (MV) and/or Hg(II). The relative effects of SA/AM ratios, in situ allocation of ASP, grafting of GG into the AMSAASP terpolymer, ligand-selective superadsorption mechanism, and relative microstructural changes in individually/synergistically-adsorbed MV-/Hg(II)-/Hg(II)-MV-GGAMSAASPs were determined by extensive analyses using Fourier transform infrared (FTIR), proton nuclear magnetic resonance, ultraviolet-visible (UV-vis), and O 1s-/N 1s-/C 1s-/Hg 4f7/2,5/2-X-ray photoelectron spectroscopies, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, field emission scanning electron microscopy, and energy-dispersive spectroscopy and were supported by % gel content, pHPZC, and % graft ratio. The ionic/covalent-bonding, monodentate, bidentate bridging, and bidentate chelating coordination between GGAMSAASPs and Hg(II), and MV+-Hg(II) bonding were rationalized by FTIR, UV-vis, fitment of kinetics data to the pseudo-second-order model, and thermodynamic parameters. The maximum adsorption capacities of 49.12 and 53.28 mg g-1 were determined for Hg(II) and MV, respectively, under optimized conditions.