Adsorbent for resorcinol removal based on cellulose functionalized with magnetic poly(dopamine)

A review of cellulose-based catechol-containing functional materials for advanced applications

With the increment in global energy consumption and severe environmental pollution, it is urgently needed to explore green and sustainable materials. Inspired by nature, catechol groups in mussel adhesion proteins have been successively understood and utilized as novel biomimetic materials. In parallel, cellulose presents a wide class of functional materials rating from macro-scale to nano-scale components. The cross-over among both research fields alters the introduction of impressive materials with potential engineering properties, where catechol-containing materials supply a general stage for the functionalization of cellulose or cellulose derivatives. In this review, the role of catechol groups in the modification of cellulose and cellulose derivatives is discussed. A broad variety of advanced applications of cellulose-based catechol-containing materials, including adhesives, hydrogels, aerogels, membranes, textiles, pulp and papermaking, composites, are presented. Furthermore, some critical remaining challenges and opportunities are studied to mount the way toward the rational purpose and applications of cellulose-based catechol-containing materials.

Responsive nanosystems for targeted therapy of ulcerative colitis: Current practices and future perspectives

The pharmacological approach to treating gastrointestinal diseases is suffering from various challenges. Among such gastrointestinal diseases, ulcerative colitis manifests inflammation at the colon site specifically. Patients suffering from ulcerative colitis notably exhibit thin mucus layers that offer increased permeability for the attacking pathogens. In the majority of ulcerative colitis patients, the conventional treatment options fail in controlling the symptoms of the disease leading to distressing effects on the quality of life. Such a scenario is due to the failure of conventional therapies to target the loaded moiety into specific diseased sites in the colon. Targeted carriers are needed to address this issue and enhance the drug effects. Conventional nanocarriers are mostly readily cleared and have nonspecific targeting. To accumulate the desired concentration of the therapeutic candidates at the inflamed area of the colon, smart nanomaterials with responsive nature have been explored recently that include pH responsive, reactive oxygen species responsive (ROS), enzyme responsive and thermo - responsive smart nanocarrier systems. The formulation of such responsive smart nanocarriers from nanotechnology scaffolds has resulted in the selective release of therapeutic drugs, avoiding systemic absorption and limiting the undesired delivery of targeting drugs into healthy tissues. Recent advancements in the field of responsive nanocarrier systems have resulted in the fabrication of multi-responsive systems i.e. dual responsive nanocarriers and derivitization that has increased the biological tissues and smart nanocarrier's interaction. In addition, it has also led to efficient targeting and significant cellular uptake of the therapeutic moieties. Herein, we have highlighted the latest status of the responsive nanocarrier drug delivery system, its applications for on-demand delivery of drug candidates for ulcerative colitis, and the prospects are underpinned.

Adhesive Composite Microspheres with Dual Antibacterial Strategies for Infected Wound Healing

Skin damage and infection pose a severe challenge to human health. Construction of a novel versatile dressing with good anti-infection and healing-promoting abilities is greatly expected. In this paper, nature-source-based composite microspheres with dual antibacterial mechanisms and bioadhesive features by microfluidics electrospray for infected wound healing is developed. The microspheres enable sustained release of copper ions, which not only show long-term antibacterial properties, but also play important role in wound-healing-related angiogenesis. Additionally, the microspheres are coated with polydopamine via self-polymerization, which renders the microspheres adhesive to the wound surface, and further enhance the antibacterial ability through photothermal energy conversion. Based on the dual antibacterial strategies provided by copper ions and polydopamine as well as the bioadhesive property, the composite microspheres exhibit excellent anti-infection and wound healing performances in a rat wound model. These results, along with the nature-source-based composition and biocompatibility, indicate the great potential of the microspheres in clinical wound repair.

Research progress on the magnetite nanoparticles in the fields of water pollution control and detection

Magnetite nanoparticles (MNPs) have shown increasing application in the fields of water pollution control and detection due to their perfect combination of interfacial functionalities and physicochemical properties, such as surface interface adsorption, (synergistic) reduction, catalytic oxidation, and electrical chemistry. This review presents the research advances in the synthesis and modification methods of MNPs in recent years, systematically summarizes the performances of MNPs and their modified materials in terms of three technical systems, including single decontamination system, coupled reaction system, and electrochemical system. In addition, the progress of the key roles played by MNPs in adsorption, reduction, catalytic oxidative degradation and their coupling with zero-valent iron for the reduction of pollutants are described. Moreover, the application prospect of MNPs-based electrochemical working electrodes for detecting micro-pollutants in water were also discussed in detail. This review addresses that the construction of MNPs-based systems for water pollution control and detection should be adapted to the natures of the target pollutants in water. Finally, the following research directions of MNPs and their remaining challenges are outlooked. In general, this review will inspire MNPs researchers in different fields for effective control and detection of a variety of contaminants in water.

Polydopamine-coated magnetic Spirulina nanocomposite for efficient magnetic dispersive solid-phase extraction of aflatoxins in pistachio

An efficient adsorbent was synthesized and used in magnetic dispersive solid phase extraction (MDSPE) of aflatoxins B1, B2, G1, and G2 at trace levels in pistachio prior to analysis by HPLC equipped with a fluorescence detector. Spirulina (Sp) algae was first magnetized, followed by surface modification with dopamine (Dp). The adsorbent was characterized using FT-IR, XRD, FE-SEM, EDX, VSM, and BET analyses. The effects of different analytical parameters on the extraction performance were evaluated. Under optimal conditions, good limits of detection (LODs) and quantifications (LOQs) were achieved in the ranges of 0.02-0.07 and 0.06-0.21 ng g^-1, respectively. The RSDs were 5.9, 6.3, 5.6, and 7.3% for AFB1, G1, B2, and G2, respectively. The proposed method was successfully used to determine AFs in pistachio samples and acceptable recoveries in the range of 72-95% were obtained.

Mussel-Inspired Magnetic Dissolving Pulp Fibers Toward the Adsorption and Degradation of Organic Dyes

In this work, a simple synthetic method was used to prepare a new type of magnetic dissolving pulp (MDP) @polydopamine (PDA) fibers. The hydroxyl groups of the fibers were converted into carboxyl groups after succinylation. Fe3O4 nanoparticles were grown in situ on the fibers. The prepared MDP@PDA fibers have catalytic reduction efficiency and adsorption performance for methylene blue organic dyes, and it has been thoroughly tested under various pH conditions. Fe3O4@PDA fibers have high reusability, are easy to separate, and regenerate quickly. The catalytic and adsorption efficiency barely decreases after repeated use. The surface of dissolving pulp fibers with a functionalized multifunctional PDA coating is used to create multifunctional catalysts and adsorbent materials. This study presents a very useful and convenient method for the synthesis and adjustment of MDP@PDA fibers, which have a wide range of potential applications in catalysis and wastewater treatment.

Promoting the stability and adsorptive capacity of Fe3O4-embedded expanded graphite with an aminopropyltriethoxysilane-polydopamine coating for the removal of copper(ii) from water

In this study, three magnetic graphites, namely, EGF, GAF, and GFA + KH550, were prepared, which were loaded either with Fe₃O₄ or with Fe₃O₄ and PDA or with Fe₃O₄, PDA, and KH550 onto expanded graphite. ATR-FTIR, XRD, XPS, SEM, TEM, and TGA characterization results showed that EGF, GAF, and GFA + KH550 were successfully prepared. Under the same initial copper concentration, the removal rates of copper ions by EGF, GFA, and GFA + KH550 were 86.2%, 96.9%, and 97.0%, respectively and the hazard index reductions of the three adsorbents were 2191 ± 71 (EGF), 1843 ± 68 (GFA), and 1664 ± 102 (GFA + KH550), respectively. Therefore GFA + KH550 exhibited better removal of Cu(ii) than EGF and GFA, for PDA and KH550 provided more adsorption-active sites like –OH and –NH. Here, the adsorption of GFA + KH550 fitted the pseudo-second-order kinetic and Langmuir models well within the testing range, which means that adsorption occurs on a monolayer surface between Cu(ii) and the adsorption sites. The intraparticle diffusion model and various thermodynamic parameters demonstrated that Cu(ii) was adsorbed on GFA + KH550 mainly via external surface diffusion and that the process was both endothermic and spontaneous. Recycling experiments show that GFA + KH550 has a satisfactory recyclability, and the way of direct recovery by magnets exhibits good magnetic induction. GFA + KH550 was applied in lake water and artificial seawater samples, and exhibited better removal of copper than that in DI water under the same environmental conditions for the existence of macromolecular organic matter. Furthermore, the adsorption capacity of copper ions was not relative to the salinity of water. The application of GFA + KH550 demonstrated the potential for application in water treatment procedures.

In this study, three magnetic graphites, namely, EGF, GAF, and GFA + KH550, were prepared, which were loaded either with Fe₃O₄ or with Fe₃O₄ and PDA or with Fe₃O₄, PDA, and KH550 onto expanded graphite.

Enhanced adsorption of resorcinol onto phosphate functionalized graphene oxide synthesized via Arbuzov Reaction: A proposed mechanism of hydrogen bonding and π-π interactions

Phosphate functionalized graphene oxide (PGO) was successfully prepared by Arbuzov reaction and employed for adsorption of resorcinol from an aqueous phase. The phosphate functional groups were successfully incorporated onto the PGO surface by the formation of P-C bonds as identified by the analysis of FTIR and XPS spectra. The evaluation of adsorption capacity of resorcinol onto PGO exhibited significant improvement of resorcinol removal, achieving an adsorption capacity of 50.25 mg/g in the pH range of 4-7 which was 15 times higher than pristine graphene oxide. The addition of 2.4 M and 5 M NaCl in the adsorption system significantly increased the adsorption capacity towards resorcinol from 50.25 mg/g to 82.10 mg/g and 128.10 mg/g, respectively. Based on kinetics and adsorption isotherm studies, Pseudo-First-Order and Langmuir model are the best model to describe the adsorption process indicating that the adsorption is dominantly controlled by physisorption. The thermodynamic analysis suggested that the adsorption process was the favorable, spontaneous, and endothermic process. Besides, the interplay of hydrogen bonding and π-π interactions is proposed to be the governing physisorption mechanism. The outstanding reusability and better adsorption performance make PGO a promising adsorbent for environmental remediation of resorcinol.

Fabrication of polydopamine-based NIR-light responsive imprinted nanofibrous membrane for effective lysozyme extraction and controlled release from chicken egg white

The development of highly efficient performance matrix for protein adsorption and scalable throughput adsorbent is highly desired, especially in pharmaceuticals and food industries. In this work, we present a simple methodology to prepare a nanofibrous membrane based surface molecular imprinted matrix (MIP) for selective separation of lysozyme. The MIP was developed by coating carboxylated poly (vinyl alcohol-co-ethylene) nanofibrous mat (EVOH-CCA NFM) with a near infrared (NIR)-light responsive polydopamine (PDA) layer. The open porous nanofibrous structure and a thin PDA layer endowed the MIPs with adsorption capacity (500 mg.g-1) within 150 min. The developed surface MIPs not only showed imprinting factor (IF = 4) with reusability upon 5 cycles, but also capability of extracting lysozyme from egg-white directly. The MIPs showed controlled release of extracted lysozyme triggered by the NIR-light responsive property of the PDA layer. Moreover, the released lysozyme possesses good bioactivity, evidenced by efficient decomposition of micrococcus bacterial cell wall.

A graphene oxide modified cellulose nanocrystal/PNIPAAm IPN hydrogel for the adsorption of Congo red and methylene blue

A simple strategy is developed to fabricate a graphene oxide modified cellulose nanocrystal/PNIPAAm IPN (GO-CNC/PNIPAAm IPN) hydrogel. It is a high-efficiency and low-cost adsorbent for the removal the anionic dye CR and cationic dye MB.

Sustainable Advanced Fenton-like Catalysts Based on Mussel-Inspired Magnetic Cellulose Nanocomposites to Effectively Remove Organic Dyes and Antibiotics

The development of biocompatible advanced Fenton-like catalysts with high catalytic activity, good stability, and recyclability using sustainable biosourced materials is of considerable interest yet remains a challenge. Herein, we develop a novel mussel-inspired magnetic cellulose nanocomposite (MCNF/PDA) with carboxylated cellulose nanofibers (CNF) and explore as advanced Fenton-like catalysts to effectively degrade organic dyes and antibiotics. The MCNF/PDA nanocomposites were prepared by anchoring Fe₃O₄ nanoparticles to CNFs via chemical deposition followed with PDA coatings. The composites exhibit an excellent degradation activity toward methylene blue (MB) in a wide pH range of 2-10 in the presence of H₂O₂ and have a maximum degradation capacity of 2265 mg/g. Moreover, the MCNF/PDA nanocatalysts are highly stable and can be easily regenerated. After four cycles, it can still achieve the removal rate as high as 95%. In addition, the MCNF/PDA nanocatalysts also demonstrate an excellent degradation performance to the antibiotic tetracycline. This work provides new insights into fabricating biocompatible cellulosic-based advanced Fenton catalysts with sustainable biomass-derived materials to efficiently remove organic pollutants from wastewater.

Preparation of Large-Size, Superparamagnetic, and Highly Magnetic Fe3O4@PDA Core⁻Shell Submicrosphere-Supported Nano-Palladium Catalyst and Its Application to Aldehyde Preparation through Oxidative Dehydrogenation of Benzyl Alcohols

Large-size, superparamagnetic, and highly magnetic Fe3O4@PDA core-shell submicrosphere-supported nano-palladium catalysts were prepared in this study. Dopamine was encapsulated on the surface of Fe3O4 particles via self-polymerization and then protonated to positively charge the microspheres. PdCl42- was dispersed on the surface of the microspheres by positive and negative charge attraction and then reduced to nano-palladium. With air as oxidant, the catalyst can successfully catalyze the dehydrogenation of benzyl alcohols to produce the corresponding aldehydes at 120 °C.

An insight into nanocellulose as soft condensed matter: Challenge and future prospective toward environmental sustainability

Nanocellulose, a structural polysaccharide that has caught tremendous interests nowadays due to its renewability, inherent biocompatibility and biodegradability, abundance in resource, and environmental friendly nature. They are promising green nanomaterials derived from cellulosic biomass that can be disintegrated into cellulose nanofibrils (CNF) or cellulose nanocrystals (CNC), relying on their sensitivity to hydrolysis at the axial spacing of disordered domains. Owing to their unique mesoscopic characteristics at nanoscale, nanocellulose has been widely researched and incorporated as a reinforcement material in composite materials. The world has been consuming the natural resources at a much higher speed than the environment could regenerate. Today, as an uprising candidate in soft condensed matter physics, a growing interest was received owing to its unique self-assembly behaviour and quantum size effect in the formation of three-dimensional nanostructured material, could be utilised to address an increasing concern over global warming and environmental conservation. In spite of an emerging pool of knowledge on the nanocellulose downstream application, that was lacking of cross-disciplinary study of its role as a soft condensed matter for food, water and energy applications toward environmental sustainability. Here we aim to provide an insight for the latest development of cellulose nanotechnology arises from its fascinating physical and chemical characteristic for the interest of different technology holders.

Highly selective adsorption of hydroquinone by hydroxyethyl cellulose functionalized with magnetic/ionic liquid

Magnetic hydroxyethyl cellulose/ionic liquid (MHEC/IL) materials were fabricated through a facile and fast process and their application as excellent adsorbents for hydroquinone was also demonstrated. The thermal stability, chemical structure and magnetic property of the MHEC/IL were characterized by the Scanning electron microscope (SEM), Transmission Electron Microscope (TEM), Fourier transform infrared spectrometer (FT-IR) and X-ray diffraction (XRD), respectively. The adsorbents were used for the removal of hydroquinone from simulated wastewater with a fast solid-liquid separation in the presence of external magnetic field. The influence of various analytical parameters on the adsorption of hydroquinone such as pH, contact time and initial ion concentration were studied in detail. The results showed that the maximum adsorption capacity was 335.68mgg^-1, observed at pH 5 and temperature 30°C. Equilibrium adsorption was achieved within 30min. The kinetic data, obtained at the optimum pH 5, could be fitted with a pseudo-second order equation. Adsorption process could be well described by Freundlich adsorption isotherms. The obtained results indicated that the impregnation of the room temperature IL significantly enhances the removal efficiency of hydroquinone. The MHEC/IL may be suitable materials in phenols pollution cleanup if they are synthesized in largescale and at low price in near future.