Enhanced removal of hazardous dye form aqueous solutions and real textile wastewater using bifunctional chitin/lignin biosorbent

Lignin: A valuable and promising bio-based absorbent for dye removal applications

The importance of environmental issues and the existence of humans have led to the recognition of environmental concerns as the main risk to modern life. Notably, one major concern for protecting and managing the environment and human health is the presence of dyes in wastewater. Therefore, before discharging wastewater into mainstream water, it is crucial to remove dyes. Among all lignocellulosic materials, lignin is a highly fragrant biopolymer. Its abundant availability, complex structure, and numerous functional moieties, including hydroxyl, carboxyl, and phenolic, are used in different chemicals and applications. Based on this, lignin is a very useful green material for adsorption, specifically in removing both heavy metals and organic pollutants from wastewater. This article describes the use of lignin-based adsorbents as a recent breakthrough in the removal of dye from aqueous solutions. On the other hand, the review intends to encourage readers to study both established and novel avenues in lignin-based dye removal materials.

A biohybrid nanomaterial of biosynthesized TiO2 NPs from Mangrove leaf and shrimp shell-based Chitosan: ultrasonic-assisted synthesis and its application for methylene blue removal and COD reduction of real industrial wastewater

In the present study, TiO2 NPs (particle size: 25-35 nm) were biosynthesized from the Mangrove leaf extract. These nanoparticles were used to modify chitosan, and Chitosan@TiO2 biohybrid nanomaterial was synthesized and characterized using FTIR, XRD, BET, and, EDX-FE-SEM analyses. The adsorption ability of Chitosan@TiO2 nanomaterial has been investigated for Methylene blue (MB) removal from aqueous solution. The results indicated that the amount of MB removal is high in alkaline pH (optimum pH = 9). The pseudo-second-order model was able to describe the effect of contact time on the adsorption ability. The Langmuir model well described the equilibrium manner, and one gram of Chitosan@TiO2 could attract 416.66 mg of MB. Kinetic data, values of parameters of activation energy (+57.283 kJ/mol), enthalpy (-86.8148 kJ/mol), and Gibbs free energy (-27.999 to -22.8987 kJ/mol) indicate the dominance of chemical adsorption over physical adsorption. The breakthrough curves of 3 adsorption/desorption cycles showed the acceptable ability and reusability of prepared nanomaterial. Synthesized biohybrid nanomaterial can reduce 75% COD and 79% nitrate of the effluent from industrial city no.3 of Yasouj. The results of this research show the high ability of chitosan@TiO2 biohybrid to remove dyes from wastewater and reduce the pollution load of industrial wastewater.

Terbium Removal from Aqueous Solutions Using a In2O3 Nanoadsorbent and Arthrospira platensis Biomass

Terbium is a rare-earth element with critical importance for industry. Two adsorbents of different origin, In2O3 nanoparticles and the biological sorbent Arthrospira platensis, were applied for terbium removal from aqueous solutions. Several analytical techniques, including X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy, were employed to characterize the adsorbents. The effect of time, pH, and terbium concentration on the adsorption efficiency was evaluated. For both adsorbents, adsorption efficiency was shown to be dependent on the time of interaction and the pH of the solution. Maximum removal of terbium by Arthrospira platensis was attained at pH 3.0 and by In2O3 at pH 4.0-7.0, both after 3 min of interaction. Several equilibrium (Langmuir, Freundlich, and Temkin) and kinetics (pseudo-first order, pseudo-second order, and Elovich) models were applied to describe the adsorption. The maximum adsorption capacity was calculated from the Langmuir model as 212 mg/g for Arthrospira platensis and 94.7 mg/g for the In2O3 nanoadsorbent. The studied adsorbents can be regarded as potential candidates for terbium recovery from wastewater.

Chitin-Based Magnesium Oxide Biocomposite for the Removal of Methyl Orange from Water

In this work, a cost-effective chitin-based magnesium oxide (CHt@MgO) biocomposite with excellent anionic methyl orange (MO) dye removal efficiency from water was developed. The CHt@MgO biocomposite was characterized by FT-IR, XRD, SEM-EDX, and TGA/DTG. Results proved the successful synthesis of CHt@MgO biocomposite. Adsorption of MO on the CHt@MgO biocomposite was optimized by varying experimental conditions such as pH, amount of adsorbent (m), contact time (t), temperature (T), and initial MO concentration (C_o). The optimized parameters for MO removal by CHt@MgO biocomposite were as follows: pH, 6; m, 2 g/L; t, 120 min. Two common isotherm models (Langmuir and Freundlich) and three kinetic models (pseudo-first-order (PFO), pseudo-second-order (PSO), and intraparticle diffusion (IPD)) were tested for experimental data fitting. Results showed that Langmuir and PFO were the most suitable to respectively describe equilibrium and kinetic results on the adsorption of MO adsorption on CHt@MgO biocomposite. The maximum Langmuir monolayer adsorption capacity (q_m) on CHt@MgO biocomposite toward MO dye was 252 mg/g at 60 °C. The reusability tests revealed that CHt@MgO biocomposite possessed high (90.7%) removal efficiency after the fifth regeneration cycle.

In Situ Ring-Opening Polymerization of L-lactide on the Surface of Pristine and Aminated Silica: Synthesis and Metal Ions Extraction

The development of functional materials from food waste sources and minerals is currently of high importance. In the present work, polylactic acid (PLA)/silica composites were prepared by in situ ring-opening polymerizations of L-lactide onto the surface of pristine (Silochrom) and amine-functionalized (Silochrom-NH₂) silica. The characteristics of the ring-opening polymerization onto the surface of modified and unmodified silica were identified and discussed. Fourier transform infrared spectroscopy was used to confirm the polymerization of lactide onto the silica surface, and thermogravimetric analysis determined that PLA constituted 5.9% and 7.5% of the composite mass for Silochrom/PLA and Silochrom-NH₂/PLA, respectively. The sorption properties of the composites with respect to Pb(II), Co(II), and Cu(II) ions were investigated, and the effect of contact time, initial metal ion concentration, and initial pH were evaluated. Silochrom-NH₂/PLA composites were found to have a higher adsorption capacity than Silochrom/PLA for all chosen ions, with the highest adsorption value occurring for Pb²⁺ at 1.5 mmol/g (90% removal efficiency). The composites showed the highest performance in the neutral or near-neutral pH (created by distilled water or buffer pH 6.86) during the first 15 min of phase contact. The equilibrium characteristics of adsorption were found to follow the Langmuir isotherm model rather than the Freundlich and Temkin models. Perspective applications for these PLA/silicas include remediation of industrial wastewater or leaching solutions from spent lead-acid and Li-ion batteries.

Adsorption of Organic Compounds on Adsorbents Obtained with the Use of Microwave Heating

Activated carbons were obtained by physical and chemical activation of the residue of supercritical extraction of green tea leaves. All the adsorbents obtained were characterized by: elemental analysis, low-temperature nitrogen adsorption, and the contents of acidic and basic oxygen functional groups on the surface of activated carbons by the Boehm method. The activated carbons were micro- or micro-mesoporous with well-developed surface area ranging from 520 to 1085 m²/g and total pore volume from 0.62 to 0.64 cm³/g. The physical activation of the precursor led to the strongly basic character of the surface. Chemical activation with 50% solution of H₃PO₄ of the residue of supercritical extraction of green tea leaves promoted the generation of acidic functional groups. All adsorbents were used for methylene blue and methyl red adsorption from the liquid phase. The influence of the activation method, pH of the dye solution, contact time of adsorbent with adsorbate, the temperature of adsorption, and rate of sample agitation on the effectiveness of organic dyes removal was evaluated and optimized. In the process of methylene blue adsorption on adsorbents, an increase in the sorption capacity was observed with increasing pH of the adsorbate, while in the process of methyl red adsorption, the relation was quite the reverse. The adsorption data were analyzed assuming the Langmuir or Freundlich isotherm models. The Langmuir model better described the experimental results, and the maximum sorption capacity calculated for this model varied from 144.93 to 250.00 mg/g. The results of the kinetic analysis showed that the adsorption of organic dyes on activated carbon was following the pseudo-second-order model. The negative values of the Gibbs free energy indicate the spontaneous character of the process.

Covalent and Non-covalent Functionalized Nanomaterials for Environmental Restoration

Nanotechnology has emerged as an extraordinary and rapidly developing discipline of science. It has remolded the fate of the whole world by providing diverse horizons in different fields. Nanomaterials are appealing because of their incredibly small size and large surface area. Apart from the naturally occurring nanomaterials, synthetic nanomaterials are being prepared on large scales with different sizes and properties. Such nanomaterials are being utilized as an innovative and green approach in multiple fields. To expand the applications and enhance the properties of the nanomaterials, their functionalization and engineering are being performed on a massive scale. The functionalization helps to add to the existing useful properties of the nanomaterials, hence broadening the scope of their utilization. A large class of covalent and non-covalent functionalized nanomaterials (FNMs) including carbons, metal oxides, quantum dots, and composites of these materials with other organic or inorganic materials are being synthesized and used for environmental remediation applications including wastewater treatment. This review summarizes recent advances in the synthesis, reporting techniques, and applications of FNMs in adsorptive and photocatalytic removal of pollutants from wastewater. Future prospects are also examined, along with suggestions for attaining massive benefits in the areas of FNMs.

Design, Synthesis and Adsorption Evaluation of Bio-Based Lignin/Chitosan Beads for Congo Red Removal

The morphology and intermolecular interaction are two of the most important factors in the design of highly efficient dye adsorbent in the industry. Millimeter-sized, bead-type, bio-based lignin/chitosan (Lig/CS) adsorbent was designed for the removal of Congo red (CR), based on the electrostatic attraction, π-π stacking, and hydrogen bonding, which were synthesized through the emulsification of the chitosan/lignin mixture followed by chemical cross-linking. The effects of the lignin/chitosan mass ratio, initial pH, temperature, concentration, and contact time on the adsorption were thoroughly investigated. The highest adsorption capacity (173 mg/g) was obtained for the 20 wt% Lig/CS beads, with a removal rate of 86.5%. To investigate the adsorption mechanism and recyclability, an evaluation of the kinetic model and an adsorption/desorption experiment were conducted. The adsorption of CR on Lig/CS beads followed the type 1 pseudo-second-order model, and the removal rate for CR was still above 90% at five cycles.

Applications of chitin and chitosan based biomaterials for the adsorptive removal of textile dyes from water - A comprehensive review

The presence of pollutants in the water bodies deteriorate the water quality and make it unfit for use. From an environmental perspective, it is essential to develop new technologies for the wastewater treatment and recycling of dye contaminated water. The surface modified chitin and chitosan biopolymeric composites based adsorbents, have an important role in the toxic organic dyes from removal wastewater. The surface modification of biopolymers with various organics and inorganics produces more active sites at the surface of the adsorbent, which enhances dye and adsorbent interaction more reliable. Herein, the work brought in the thought of the application of various chitin and chitosan composites in wastewater remediation and suggested the versatility in composites for the development of rapid, selective and effective removal processes for the detoxification of a variety of organic dyes. It further emphasizes the existing obstruction and impending prediction for the deprivation of dyes via adsorption techniques.

Adsorption and Desorption Properties of Polyethylenimine/Polyvinyl Chloride Cross-Linked Fiber for the Treatment of Azo Dye Reactive Yellow 2

In this study, the optimal conditions for the fabrication of polyethylenimine/polyvinyl chloride cross-linked fiber (PEI/PVC-CF) were determined by comparing the adsorption capacity of synthesized PEI/PVC-CFs for Reactive Yellow 2 (RY2). The PEI/PVC-CF prepared through the optimal conditions was characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and Brunauer–Emmett–Teller (BET) analyses. Several batch adsorption and desorption experiments were carried out to evaluate the sorption performance and reusability of PEI/PVC-CF for RY2. As a result, the adsorption of RY2 by PEI/PVC-CF was most effective at pH 2.0. A pseudo-second-order model fit better with the kinetics adsorption data. The adsorption isotherm process was described well by the Langmuir model, and the maximum dye uptake was predicted to be 820.6 mg/g at pH 2.0 and 25 °C. Thermodynamic analysis showed that the adsorption process was spontaneous and endothermic. In addition, 1.0 M NaHCO₃ was an efficient eluent for the regeneration of RY2-loaded PEI/PVC-CF. Finally, the repeated adsorption–desorption experiments showed that the PEI/PVC-CF remained at high adsorption and desorption efficiencies for RY2, even in 17 cycles.

Lignin-derived (nano)materials for environmental pollution remediation: Current challenges and future perspectives

The supply of affordable drinking and sufficiently clean water for human consumption is one of the world's foremost environmental problems and a large number of scientific research works are addressing this issue Various hazardous/toxic environmental contaminants in water bodies, both inorganic and organic (specifically heavy metals and dyes), have become a serious global problem. Nowadays, extensive efforts have been made to search for novel, cost effective and practical biosorbents derived from biomass resources with special attention to value added, biomass-based renewable materials. Lignin and (nano)material adorned lignin derived entities can proficiently and cost effectively remove organic/inorganic contaminants from aqueous media. As low cost of preparation is crucial for their wide applications in water/wastewater treatment (particularly industrial water), future investigations must be devoted to refining and processing the economic viability of low cost, green lignin-derived (nano)materials. Production of functionalized lignin, lignin supported metal/metal oxide nanocomposites or hydrogels is one of the effective approaches in (nano)technology. This review outlines recent research progresses, trends/challenges and future prospects about lignin-derived (nano)materials and their sustainable applications in wastewater treatment/purification, specifically focusing on adsorption and/or catalytic reduction/(photo)degradation of a variety of pollutants.

High-Yield Production of Lignin-Derived Functional Carbon Nanosheet for Dye Adsorption

In this article, we report the preparation of lignin-derived carbon nanosheet (L-CNS) by direct thermal treatment of lignin without activation operation and the functions of the L-CNS as an adsorbent for rhodamine dye. The L-CNSs are fabricated by freeze-drying (FD) methods of lignin followed by high-temperature carbonization. It is found that lower frozen temperature in FD or lower concentration of lignin aqueous solution renders L-CNSs' more porous morphology and higher specific surface area (SSA), allowing a promising application of the L-CNSs as an efficient adsorbent for organic pollutants. In particular, the alkaline hydroxide catalyst helps to increase the SSA of carbon products, leading to a further improved adsorption capacity. On the other hand, p-toluenesulfonic acid (TsOH) catalyzed pyrolysis, which dramatically increased the L-CNS product yield, and provided a high-yield approach for the production of pollutant absorbent.

Exploration of Chitinous Scaffold-Based Interfaces for Glucose Sensing Assemblies

: The nanomaterial-integrated chitinous polymers have promoted the technological advancements in personal health care apparatus, particularly for enzyme-based devices like the glucometer. Chitin and chitosan, being natural biopolymers, have attracted great attention in the field of biocatalysts engineering. Their remarkable tunable properties have been explored for enhancing enzyme performance and biosensor advancements. Currently, incorporation of nanomaterials in chitin and chitosan-based biosensors are also widely exploited for enzyme stability and interference-free detection. Therefore, in this review, we focus on various innovative multi-faceted strategies used for the fabrication of biological assemblies using chitinous biomaterial interface. We aim to summarize the current development on chitin/chitosan and their nano-architecture scaffolds for interdisciplinary biosensor research, especially for analytes like glucose. This review article will be useful for understanding the overall multifunctional aspects and progress of chitin and chitosan-based polysaccharides in the food, biomedical, pharmaceutical, environmental, and other diverse applications.

Functionalization of wool fabric using lignin biomolecules extracted from groundnut shells

Food and agro-processing industries generate a huge quantity of solid waste which is rich in bio-macromolecules like lignin. The extraction of lignin biomolecules can help in the efficient management of such waste along with the generation of wealth from the waste. The groundnut shells are one of the lignin-rich wastes which could be utilized for the extraction of lignin biomolecules. The present work investigates an innovative approach involving the application of extracted lignin biomolecules for the value-addition to wool fabrics. Metallic mordants were utilized to get a wash-fast attachment of lignin with wool. The change in the appearance of wool fabrics was analyzed using reflectance spectroscopy. The finished fabrics were further evaluated for the functional properties like antioxidant activity, antibacterial activity and UV protection. The functionalized wool fabrics displayed a variety of shades with different combinations of groundnut shell lignin (GSL) and mordant. Thermal stability of treated wool fabrics was analyzed by thermogravimetric analysis. The functionalized wool fabrics showed significant antioxidant activity (69.5-84.5%), antibacterial activity (79.7-86.3%) and UV protection (UPF ratings of 50⁺).

Synthesis of γ-alumina (Al2O3) nanoparticles and their potential for use as an adsorbent in the removal of methylene blue dye from industrial wastewater

Non-toxic nanomaterials have gained significant importance recently in the treatment of industrial wastewater that sometimes contains organic dyes such as methylene blue. We report here an easy approach for the synthesis of γ-alumina (Al₂O₃) nanoparticles via a method that incorporates the use of formamide and the non-ionic surfactant Tween-80. Together, formamide and Tween-80 serve as an effective precipitating agent and a convenient synthetic template, respectively, in directing the growth of the alumina nanoparticles. The morphology and structure of the nanoparticles were investigated by FT-IR, XRD, TGA, SEM, EDX, elemental mapping and TEM methods. The sizes of the nanoparticles are in the 30-50 nm range. The maximum pore size is 4.13 nm and the surface area is 112.9 m² g^-1 as determined by the Brunauer-Emmett-Teller (BET) method. The nanomaterials are excellent adsorbents for the cationic methylene blue dye from aqueous solution. The effects of pH, time, temperature and concentration on the adsorption have been examined and the adsorption capacity increased from 490 to 2210 mg g^-1 as the initial concentration was increased from 50 to 400 mg L^-1 under the following conditions: pH 9, 10 min reaction time, and 60 °C. The adsorption mechanism is considered to encompass electrostatic interactions in water between the Al₂O₃ nanoparticles and the cationic methylene blue dye. These readily made nanoparticles may well prove useful in both wastewater treatment and industrial catalysis.

Development of anti-photo and anti-thermal high internal phase emulsions stabilized by biomass lignin as a nutraceutical delivery system

β-Carotene was encapsulated in natural lignin-stabilized HIPEs and exhibited good resistance to photodegradation and thermal degradation as well as bio-accessibility.

Peculiarities of Synthesis and Properties of Lignin⁻Silica Nanocomposites Prepared by Sol-Gel Method

The development of advanced hybrid materials based on polymers from biorenewable sources and mineral nanoparticles is currently of high importance. In this paper, we applied softwood kraft lignins for the synthesis of lignin/SiO₂ nanostructured composites. We described the peculiarities of composites formation in the sol-gel process through the incorporation of the lignin into a silica network during the hydrolysis of tetraethoxysilane (TEOS). The initial activation of lignins was achieved by means of a Mannich reaction with 3-aminopropyltriethoxysilane (APTES). In the study, we present a detailed investigation of the physicochemical characteristics of initial kraft lignins and modified lignins on each step of the synthesis. Thus, 2D-NMR, ³¹P-NMR, size-exclusion chromatography (SEC) and dynamic light scattering (DLS) were applied to analyze the characteristics of pristine lignins and lignins in dioxan:water solutions. X-Ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) were used to confirm the formation of the lignin⁻silica network and characterize the surface and bulk structures of the obtained hybrids. Termogravimetric analysis (TGA) in nitrogen and air atmosphere were applied to a detailed investigation of the thermal properties of pristine lignins and lignins on each step of modification. SEM confirmed the nanostructure of the obtained composites. As was demonstrated, the activation of lignin is crucial for the sol-gel formation of a silica network in order to create novel hybrid materials from lignins and alkoxysilanes (e.g., TEOS). It was concluded that the structure of the lignin had an impact on its reactivity during the activation reaction, and consequently affected the properties of the final hybrid materials.

Modifying cellulose with metaphosphoric acid and its efficiency in removing brilliant green dye

In this study, cellulose was chemically modified through the addition of the phosphorylating agent, metaphosphoric acid in order to obtain a new material (MPCel) with higher adsorptive properties than the starting material. Both materials were characterized by infrared spectroscopy, X-ray diffraction, solid-state phosphorus-31 nuclear magnetic resonance spectroscopy and thermogravimetric analysis. Maximal adsorption capacity, at 45°C for pure cellulose, was 90.5mgg^-1, at pH=10 and contact time of 40min, with experimental isotherms better adjusted to the Langmuir model. MPCel at the same temperature conditions showed contact time of 10min, pH=10, and maximal adsorption capacity of 150.0mgg^-1, being better adjusted to the Temkin model. The kinetic study of both materials followed the pseudo-second-order model. Modification successfully occurred and both adsorbents were shown able to be capable of removing the brilliant green dye, but MPCel was more efficient for purpose, when compared to the pure cellulose.

Modification of chitin with high adsorption capacity for methylene blue removal

Porous chitin sorbents (PChs) with different content of chitin, ranging from 0.9% to 3.5%, were prepared by gel method with CaBr₂·xH₂O/CH₃OH solution and characterized by FT-IR, XRD and SEM. The adsorption isotherms and kinetic analysis of methylene blue (MB) onto PChs were studied. Experimental results illustrated lower crystallinity and more pores of PChs containing 3.5% chitin displayed higher adsorption capacity, the removal of MB was 79.8%. The adsorption equilibrium isotherm curve of MB onto PChs adsorbents conformed to the Freundlich equation. The PFO, PSO and Weber-Morris models were applied to fit with the adsorption kinetics. The results demonstrated the adsorption of MB might be the mass transfer of heterogeneous system and involve multiple diffusion steps. The adsorption capacity of PChs with 3.5% chitin can maintain 65% removal ratio of MB after being used six adsorption-desorption cycles. It was supposed that PChs may be a promising, cheap, environmentally friendly and efficient adsorbent for some dye wastewater treatment in the near future.

Imidazole-2yl-Phosphonic Acid Derivative Grafted onto Mesoporous Silica Surface as a Novel Highly Effective Sorbent for Uranium(VI) Ion Extraction

A new imidazol-2yl-phosphonic acid/mesoporous silica sorbent (ImP(O)(OH)₂/SiO₂) was developed and applied for uranium(VI) ion removal from aqueous solutions. The synthesized material was characterized by fast kinetics and an extra-high adsorption capacity with respect to uranium. The highest adsorption efficiency of U(VI) ions was obtained for the reaction system at pH 4 and exceeded 618 mg/g. The uranium(VI) sorption proceeds quickly in the first step within 60 min of the adsorbent sites and ion interactions. Moreover, the equilibrium time was determined to be 120 min. The equilibrium and kinetic characteristics of the uranium(VI) ions uptake by synthesized sorbent was found to follow the Langmuir-Freundlich isotherm model and pseudo-second-order kinetics rather than the Langmuir, Dubinin-Radushkevich, and Temkin models and pseudo-first-order or intraparticle diffusion sorption kinetics. The adsorption mechanism for uranium on the sorbent was clarified basing on the X-ray photoelectron spectroscopy (XPS) analysis. The model of UO₂²⁺ binding to surface of the sorbent was proposed according to the results of XPS, i.e., a 1:1 U-to-P ratio in the sorbed complex was established. The regeneration study confirms the ImP(O)(OH)₂/SiO₂ sorbent can be reused. A total of 45% of uranium ions was determined as originating from the sorbent leaching in the acidic solutions, whereas when the basic solutions were used, the removal efficiency was 12%.

Removal of hazardous non-steroidal anti-inflammatory drugs from aqueous solutions by biosorbent based on chitin and lignin

The use of chitin modified with kraft lignin as an effective sorbent of ibuprofen and acetaminophen is described for the first time. It was determined how the parameters (contact time, pH, mass of sorbent and temperature) influence the effectiveness of the adsorption process. The adsorption kinetics were calculated using pseudo-first-order, pseudo-second-order (types 1-4) and intra-particle diffusion models, and thermodynamic parameters were determined. The experimental data better correspond to a pseudo-second-order kinetic model of type 1 in the case of both tested pharmaceuticals (r²=0.999). The negative values of ΔH° show the adsorption to be exothermic (-5.515kJ/mol and -5.161kJ/mol for ibuprofen and acetaminophen respectively). Adsorption isotherms, using Langmuir isotherms of types 1-4 and Freundlich model, were also determined. The experimental data better correspond to the Langmuir type 1 model in the case of ibuprofen, and to the Freundlich model in the case of acetaminophen. Desorption tests were carried out to confirm the possibility of reusing the chitin/lignin system. A mechanism of adsorption of ibuprofen and acetaminophen on the chitin/lignin system was also proposed.

MOF–cation exchange resin composites and their use for water decontamination

Cation exchange resin–ZIF-8 composite beads were prepared and used for the decontamination of water from dye and medical pollutants.

Adsorptive removal of aqueous bezafibrate by magnetic ferrite modified carbon nanotubes

MFe₂O₄/CNTs were synthesized and successfully applied for the removal of aqueous bezafibrate. The adsorption behavior and mechanism were elucidated in detail.