Hydration-induced crystalline transformation of starch polymer under ambient conditions

Impact of flaxseed gum on the aggregate structure, pasting properties, and rheological behavior of waxy rice starch

This study examines the effects of flaxseed gum (FG) on the aggregate structure, pasting and rheological properties of waxy rice starch (WRS). Results display an increase in the ordered molecular structure (R1047/1024), relative crystallinity (RC), compactness (α), and microphase heterogeneity (ε, density degree of nanoaggregates, from 3.52 to 4.23) for WRS-FG complexes. These suggested FG facilitated the development of more organized molecular and crystalline structures of WRS, accompanied by the formation of ordered nanoaggregates with higher density (i.e., nano-aggregation structure). Also, FG addition resulted in the formation of enhanced gel network structure characterized by thicker layer walls and more uniform pores. These structural transformations contributed to a rise in gelatinization temperature (To, from 56.90 °C to 62.10 °C) and enthalpy (ΔH), as well as alterations in paste viscosities (PV, from 1285.00 mPa·s to 1734.00 mPa·s), and the rigidity of network structure (e.g., decreased loss tangent). These results indicate that FG could effectively regulate the techno-functional properties of WRS by rationally controlling the starch intrinsic structures of starch. And this study may improve the pasting and gelling properties of starch, thus driving the development of high-quality starchy foods and prolonging their shelf life, especially for glutinous rice flour products.

A novel efficient wet process for preparing cross-linked starch: Impact of urea on cross-linking performance

Although wet processes are promising for preparing cross-linked starch, they are currently challenged by lower cross-linking efficiency and the requirement of large amounts of salts. Herein, an efficient and greener wet process was proposed, in which the cross-linking performance between sodium hexametaphosphate (SHMP) and starch was enhanced with the aid of urea. The maximum degree of substitution (DS) of the urea-phosphorylated cross-linked starch (UPCS) was 0.040 at 35 °C, while that of the conventional phosphorylated cross-linked starch (CPCS) was 0.031 at 45 °C. Compared with CPCS, the maximum DS of UPCS was elevated by 29.03 %, but its optimum cross-linking temperature was reduced by 10 °C, indicating that the cross-linking efficiency of this novel wet process was greatly improved by urea. The structural difference between UPCS and CPCS was confirmed by using a series of techniques including 31P NMR and 13C NMR. Zeta potential results suggested that urea may promote starch cross-linking by preventing the closure of active sites through hydrophobic interactions. Due to the structural reinforcement of starch by urea, UPCS showed better thermal stability, water resistance, acid and alkali resistance, and steady shear tolerance properties. This study provides a facile wet process for the fabrication and application of cross-linked starch materials.

Impact of long-term ultrasound treatment on structural and physicochemical properties of starches differing in granule size

Granule size is a critical parameter affecting starch processing properties. Ultrasound treatments of up to 22 h were applied on two starches differing in granule size (quinoa starch and maize starch). The two starches showed significantly different trends in both structural and physicochemical aspects affected by the ultrasound treatments. For the small granule starch (volume-weighted mean particle size of 1.79 μm), short-term ultrasonication caused an increase of swelling power. As the treatment time increased, the physicochemical properties were influenced by the degradation of amylopectin external chains. The X-ray diffraction results showed a decrease of relative crystallinity and changes of peak areas with long-term treatment. On the other hand, a balance between amylose leaching and surface damages was seen for the large granule starch (volume-weighted mean particle size of 18.3 μm). The effect of ultrasound modification on starches with different molecular and granular structures was discussed. A possible mechanism of the ultrasound effect was proposed.

Complexing curcumin and resveratrol in the starch crystalline network alters in vitro starch digestion: Towards developing healthy food materials

Starch is an abundant and common food ingredient capable of complexing with various bioactive compounds (BCs), including polyphenols. However, little information is available about using native starch network arrangement for the starch-BCs inclusion. Herein, two BCs, curcumin, and resveratrol, were undertaken to delineate the role of different starch crystalline types on their encapsulation efficiency. Four starches with different crystalline types, botanical sources, and amylose content were examined. The results suggest that B-type hexagonal packing is necessary to encapsulate curcumin and resveratrol successfully. The increase in XRD crystallinity while maintaining the FTIR band at 1048/1016 cm^-1 suggests that BCs are likely entrapped inside the starch granule than attaching to the granule surface. A significant change in starch digestion is seen only for the B-starch complexes. Embedding BCs in the starch network and controlling starch digestion could be a cost-effective and valuable approach to designing and developing novel starch-based functional food ingredients.

Holistic View of Starch Chemistry, Structure and Functionality in Dry Heat-Treated Whole Wheat Kernels and Flour

Heat treatment is used as a pre-processing step to beneficially change the starch properties of wheat flour to enhance its utilisation in the food industry. Heat-treated wheat flour may provide improved eating qualities in final wheat-based products since flour properties predominantly determine the texture and mouthfeel. Dry heat treatment of wheat kernels or milled wheat products involves heat transfer through means of air, a fluidising medium, or radiation—often resulting in moisture loss. Heat treatment leads to changes in the chemical, structural and functional properties of starch in wheat flour by inducing starch damage, altering its molecular order (which influences its crystallinity), pasting properties as well as its retrogradation and staling behaviour. Heat treatment also induces changes in gluten proteins, which may alter the rheological properties of wheat flour. Understanding the relationship between heat transfer, the thermal properties of wheat and the functionality of the resultant flour is of critical importance to obtain the desired extent of alteration of wheat starch properties and enhanced utilisation of the flour. This review paper introduces dry heat treatment methods followed by a critical review of the latest published research on heat-induced changes observed in wheat flour starch chemistry, structure and functionality.

Polyaniline/Biopolymer Composite Systems for Humidity Sensor Applications: A Review

The development of polyaniline (PANI)/biomaterial composites as humidity sensor materials represents an emerging area of advanced materials with promising applications. The increasing attention to biopolymer materials as desiccants for humidity sensor components can be explained by their sustainability and propensity to absorb water. This review represents a literature survey, covering the last decade, which is focused on the interrelationship between the core properties and moisture responsiveness of multicomponent polymer/biomaterial composites. This contribution provides an overview of humidity-sensing materials and the corresponding sensors that emphasize the resistive (impedance) type of PANI devices. The key physicochemical properties that affect moisture sensitivity include the following: swelling, water vapor adsorption capacity, porosity, electrical conductivity, and enthalpies of adsorption and vaporization. Some key features of humidity-sensing materials involve the response time, recovery time, and hysteresis error. This work presents a discussion on various types of humidity-responsive composite materials that contain PANI and biopolymers, such as cellulose, chitosan and structurally related systems, along with a brief overview of carbonaceous and ceramic materials. The effect of additive components, such as polyvinyl alcohol (PVA), for film fabrication and their adsorption properties are also discussed. The mechanisms of hydration and proton transfer, as well as the relationship with conductivity is discussed. The literature survey on hydration reveals that the textural properties (surface area and pore structure) of a material, along with the hydrophile-lipophile balance (HLB) play a crucial role. The role of HLB is important in PANI/biopolymer materials for understanding hydration phenomena and hydrophobic effects. Fundamental aspects of hydration studies that are relevant to humidity sensor materials are reviewed. The experimental design of humidity sensor materials is described, and their relevant physicochemical characterization methods are covered, along with some perspectives on future directions in research on PANI-based humidity sensors.

Sago starch nanocrystal-stabilized Pickering emulsions: Stability and rheological behavior

This study presents the isolation of SNC from sago starch and its performance as proficient particle emulsifier. It highlights the impact of SNC on the stability and rheological properties of oil-in-water (o/w) emulsions. The percentage yield of the SNC obtained was equivalent to 25 ± 0.1% (w/w) with particle diameters ranging from 25 to 100 nm. A series of Pickering emulsion at different ratios of oil (5%-35% v/v) and SNC (1%-4% w/v) was prepared for further investigations. The mean droplet diameter of emulsions obtained was ranged from 19.12 to 35.96 μm, confirming the effects of both SNC and oil content on the droplet's diameter distribution. Formulations with 4.0 wt% of SNC exhibited the maximum stability against coalescence. Results obtained have justified that the SNC can be used as an alternative solid emulsifier in producing stable emulsion with desired properties for various applications.

Plasticized Starch/Agar Composite Films: Processing, Morphology, Structure, Mechanical Properties and Surface Hydrophilicity

Natural biopolymers, which are renewable, widely available, biodegradable, and biocompatible, have attracted huge interest in the development of biocomposite materials. Herein, formulation–property relationships for starch/agar composite films were investigated. First, rapid visco analysis was used to confirm the conditions needed for their gelation and to prepare filmogenic solutions. All the original crystalline and/or lamellar structures of starch and agar were destroyed, and films with cohesive and compact structures were formed, as shown by SEM, XRD, and SAXS. All the plasticized films were predominantly amorphous, and the polymorphs of the composite films were closer to that of the agar-only film. FTIR results suggest that the incorporation of agar restricted starch chain interaction and rearrangement. The addition of agar to starch increased both tensile strength and elongation at break, but the improvements were insignificant after the agar content was over 50 wt.%. Contact angle results indicate that compared with the other samples, the 4:6 (wt./wt.) starch/agar film was less hydrophilic. Thus, this work shows that agar dominates the structure and properties of starch/agar composites, and the best properties can be obtained with a certain starch/agar ratio. Such composite polysaccharide films with tailored mechanical properties and surface hydrophilicity could be useful in biodegradable packaging and biomedical applications (wound dressing and tissue scaffolding).

Polyglucosan body structure in Lafora disease

Abnormal carbohydrate structures known as polyglucosan bodies (PGBs) are associated with neurological disorders, glycogen storage diseases (GSDs), and aging. A hallmark of the GSD Lafora disease (LD), a fatal childhood epilepsy caused by recessive mutations in the EPM2A or EPM2B genes, are cytoplasmic PGBs known as Lafora bodies (LBs). LBs result from aberrant glycogen metabolism and drive disease progression. They are abundant in brain, muscle and heart of LD patients and Epm2a^-/- and Epm2b^-/- mice. LBs and PGBs are histologically reminiscent of starch, semicrystalline carbohydrates synthesized for glucose storage in plants. In this study, we define LB architecture, tissue-specific differences, and dynamics. We propose a model for how small polyglucosans aggregate to form LBs. LBs are very similar to PGBs of aging and other neurological disorders, and so these studies have direct relevance to the general understanding of PGB structure and formation.

Insight on the changes of cassava and potato starch granules during gelatinization

Gelatinization is an important property of starch for biomedical applications. However, studies on the changes in starch granules in terms of morphology, swelling, amylose leaching and so on during gelatinization, which are key to uncovering the starch gelatinization process, have rarely been reported. Herein, changes of cassava and potato starch granules during gelatinization were investigated. It was found that there is a substantial difference in the granule changes during gelatinization between cassava and potato starch. Cassava starch granules remain intact with slight swelling, with approximately 8.5% amylose leaching in water for 30 min at 60 °C. In sharp contrast, potato starch granules swell very well and rapidly, losing much integrity with 51.05% amylose leaching. The gelatinization time and temperature have much greater effects on the changes of potato starch granules than cassava starch granules.