Improvement of the catalytic characteristics of a salt-tolerant GH10 xylanase from Streptomyce rochei L10904

Enzymatic production of xylooligosaccharide from lignocellulosic and marine biomass: A review of current progress, challenges, and its applications in food sectors

Over the last decade, xylooligosaccharides (XOS) have attracted great attentions because of their unique chemical properties and excellent prebiotic effects. Among the current strategies for XOS production, enzymatic hydrolysis is preferred due to its green and safe process, simplicity in equipment, and high control of the degrees of polymerization. This paper comprehensively summarizes various lignocellulosic biomass and marine biomass employed in enzymatic production of XOS. The importance and advantages of enzyme immobilization in XOS production are also discussed. Many novel immobilization techniques for xylanase are presented. In addition, bioinformatics techniques for the mining and designing of new xylanase are also described. Moreover, XOS has exhibited great potential applications in the food industry as diverse roles, such as a sugar replacer, a fat replacer, and cryoprotectant. This review systematically summarizes the current research progress on the applications of XOS in food sectors, including beverages, bakery products, dairy products, meat products, aquatic products, food packaging film, wall materials, and others. It is anticipated that this paper will act as a reference for the further development and application of XOS in food sectors and other fields.

Improvement of thermostability and catalytic efficiency of xylanase from Myceliophthora thermophilar by N-terminal and C-terminal truncation

Introduction

Extracting xylanase from thermophilic filamentous fungi is a feasible way to obtain xylanase with good thermal stability.

Methods

The transcriptomic data of Myceliophthora thermophilic destructive ATCC42464 were differentially expressed and enriched. By comparing the sequences of Mtxylan2 and more than 10 xylanases, the N-terminal and C-terminal of Mtxylan2 were truncated, and three mutants 28N, 28C and 28NC were constructed.

Results and discussion

GH11 xylan Mtxylan2 was identified by transcriptomic analysis, the specific enzyme activity of Mtxylan2 was 104.67 U/mg, and the optimal temperature was 65°C. Molecular modification of Mtxylan2 showed that the catalytic activity of the mutants was enhanced. Among them, the catalytic activity of 28C was increased by 9.3 times, the optimal temperature was increased by 5°C, and the residual enzyme activity remained above 80% after 30 min at 50-65°C, indicating that redundant C-terminal truncation can improve the thermal stability and catalytic performance of GH11 xylanase.

Three Molecular Modification Strategies to Improve the Thermostability of Xylanase XynA from Streptomyces rameus L2001

Glycoside hydrolase family 11 (GH11) xylanases are the preferred candidates for the production of functional oligosaccharides. However, the low thermostability of natural GH11 xylanases limits their industrial applications. In this study, we investigated the following three strategies to modify the thermostability of xylanase XynA from Streptomyces rameus L2001 mutation to reduce surface entropy, intramolecular disulfide bond construction, and molecular cyclization. Changes in the thermostability of XynA mutants were analyzed using molecular simulations. All mutants showed improved thermostability and catalytic efficiency compared with XynA, except for molecular cyclization. The residual activities of high-entropy amino acid-replacement mutants Q24A and K104A increased from 18.70% to more than 41.23% when kept at 65 °C for 30 min. The catalytic efficiencies of Q24A and K143A increased to 129.99 and 92.26 mL/s/mg, respectively, compared with XynA (62.97 mL/s/mg) when using beechwood xylan as the substrate. The mutant enzyme with disulfide bonds formed between Val3 and Thr30 increased the t_1/2^{60 °C} by 13.33-fold and the catalytic efficiency by 1.80-fold compared with the wild-type XynA. The high thermostabilities and hydrolytic activities of XynA mutants will be useful for enzymatic production of functional xylo-oligosaccharides.

High-level production of xylose from agricultural wastes using GH11 endo-xylanase and GH43 β-xylosidase from Bacillus sp

As a promising feedstock, alkali-extracted xylan from lignocellulosic biomass is desired for producing xylose, which can be used for renewable biofuels production. In this study, an efficient pathway has been established for low-cost and high-yield production of xylose by hydrolysis of alkali-extracted xylan from agricultural wastes using an endo-1,4-xylanase (XYLA) from Bacillus safensis TCCC 111022 and a β-xylosidase (XYLO) from B. pumilus TCCC 11573. The optimum activities of recombinant XYLA (rXYLA) and XYLO (rXYLO) were 60 ℃ and pH 8.0, and 30 ℃ and pH 7.0, respectively. They were stable over a broad pH range (pH 6.0-11.0 and 7.0-10.0). rXYLO showed a relatively high xylose tolerance up to 100 mM. Furthermore, the yield of xylose from wheat straw, rice straw, corn stover, corncob and sugarcane bagasse by rXYLA and rXYLO was 63.77%, 71.76%, 68.55%, 53.81%, and 58.58%, respectively. This study demonstrated a strategy to produce xylose from agricultural wastes by integrating alkali-extracted xylan and enzymatic hydrolysis.

Biochemical characterization of a GH10 xylanase from the anaerobic rumen fungus Anaeromyces robustus and application in bread making

Anaeromyces robustus is an anaerobic rumen microorganism which can produce plant cell wall degrading enzymes. In this study, a new GH10 xylanase gene xylAr10 from A. robustus was identified, cloned and expressed in Pichia pastoris GS115. The recombinant protein ArXyn10 was characterized after being purified by Ni-NTA. The optimal pH and temperature of ArXyn10 was determined at 5.5 and 40 °C, respectively. ArXyn10 was stable at the pH range of 4.0-8.0, and could maintain high stability from 35 to 45 °C. The hydrolysis products released from beechwood xylan by ArXyn10 showed chromatographic mobility similar to xylobiose and xylotriose according to thin-layer chromatography analysis. It was shown that the addition of 7.5 mg of ArXyn10 in 100 g high-gluten wheat flour during bread making could increase the reducing sugar content by 10.80%, indicating that xylo-oligosaccharides were produced. With the addition of ArXyn10, the hardness and chewiness of the bread decreased and the quality was improved. The new discovered xylanase ArXyn10 have potential application prospect in bread making.

Biotechnological Aspects of Salt-Tolerant Xylanases: A Review

β-1,4-Xylan is the main component of hemicelluloses in land plant cell walls, whereas β-1,3-xylan is widely found in seaweed cell walls. Complete hydrolysis of xylan requires a series of synergistically acting xylanases. High-saline environments, such as saline-alkali lands and oceans, frequently occur in nature and are also involved in a broad range of various industrial processes. Thus, salt-tolerant xylanases may contribute to high-salt and marine food processing, aquatic feed production, industrial wastewater treatment, saline-alkali soil improvement, and global carbon cycle, with great commercial and environmental benefits. This review mainly introduces the definition, sources, classification, biochemical and molecular characteristics, adaptation mechanisms, and biotechnological applications of salt-tolerant xylanases. The scope of development for salt-tolerant xylanases is also discussed. It is anticipated that this review would serve as a reference for further development and utilization of salt-tolerant xylanases and other salt-tolerant enzymes.

Improving the catalytic characteristics of phenolic acid decarboxylase from Bacillus amyloliquefaciens by the engineering of N-terminus and C-terminus

Background

4-vinylphenols produced by phenolic acid degradation catalyzed by phenolic acid decarboxylase can be used in food additives as well as flavor and fragrance industry. Improving the catalytic characters of phenolic acid decarboxylase is of great significance to enhance its practical application.

Results

A phenolic acid decarboxylase (P-WT) was created from Bacillus amyloliquefaciens ZJH-01. Mutants such as P-C, P-N, P-m1, P-m2, P-Nm1, and P-Nm2 were constructed by site-directed mutagenesis of P-WT. P-C showed better substrate affinities and higher turnover rates than P-WT for p-coumaric acid, ferulic acid, and sinapic acid; however, P-N had reduced affinity toward p-coumaric acid. The extension of the C-terminus increased its acid resistance, whereas the extension of the N-terminus contributed to the alkali resistance and heat resistance. The affinity of P-m1 to four substrates and that of P-m2 to p-coumaric acid and ferulic acid were greatly improved. However, the affinity of P-Nm2 to four phenolic acids was greatly reduced. The residual enzyme activities of P-Nm1 and P-Nm2 considerably improved compared with those of P-m1 and P-m2 after incubation at 50 °C for 60 min.

Conclusions

The extension of the N-terminus may be more conducive to the combination of the binding cavity with the substrate in an alkaline environment and may make its structure more stable.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12896-021-00705-7.

Enzymatic characterization of a novel thermostable and alkaline tolerant GH10 xylanase and activity improvement by multiple rational mutagenesis strategies

Thermo-alkaline xylanases are widely applied in paper pulping industry. In this study, a novel thermostable and alkaline tolerant GH10 xylanase (Xyn30Y5) gene from alkaliphilic Bacillus sp. 30Y5 was cloned and the surface-layer homology (SLH) domains truncated enzyme (Xyn30Y5-SLH) was expressed in Escherichia coli. The purified Xyn30Y5-SLH was most active at 70 °C and pH 7.0 and showed the highest specific activity of 349.4 U mg^-1. It retained more than 90% activity between pH 6.0 to 9.5 and was stable at pH 6.0-10.0. To improve the activity, 47 mutants were designed based on eight rational strategies and 21 mutants showed higher activity. By combinatorial mutagenesis, the best mutant 3B demonstrated specific activity of 1016.8 U mg^-1 with a doubled catalytic efficiency (k_cat/K_m) and RA60_1/2h value, accompanied by optimal pH shift to 8.0. The molecular dynamics simulation analysis indicated that the increase of flexibility of α5 helix and loop7 located near to the catalytic residues is likely responsible for its activity improvement. And the decrease of flexibility of the most unstable regions is vital for the thermostablity improvement. This work provided not only a novel thermostable and alkaline tolerant xylanase with industrial application potential but also an effective mutagenesis strategy for xylanase activity improvement.

Improving the catalytic activity of thermostable xylanase from Thermotoga maritima via mutagenesis of non-catalytic residues at glycone subsites

Endo-β-1,4-xylanase from Thermotoga maritima, TmxB, is an industrially attractive enzyme due to its extreme thermostability. To improve its application value, four variants were designed on the basis of multiple sequence and three-dimensional structure alignments. Wild-type TmxB (wt-TmxB) and its mutants were produced via a Pichia pastoris expression system. Among four single-site mutants, the tyrosine substitution of a threonine residue (T74Y) at putative -3/-4 subsite led to a 1.3-fold increase in specific activity at 40 °C - 100 °C and pH 5 for 5 min, with beechwood xylan as the substrate. T74Y had an improved catalytic efficiency (k_cat/K_m), being 1.6 times that of wt-TmxB. Variants DY (two amino acid insertions) and N68Q displayed a slight increase (1.2 fold) and dramatic decline (1.7 fold) in catalytic efficiency, respectively. Mutant E67Y was totally inactive under all test conditions. Structural modeling and docking simulation elucidated structural insights into the molecular mechanism of activity changes for these TmxB variants. This study helps in further understanding the roles of the non-catalytic amino acids at the glycone subsites of xylanases from glycoside hydrolase family 10.

Mutagenesis of N-terminal residues confer thermostability on a Penicillium janthinellum MA21601 xylanase

BACKGROUND

A mesophilic xylanase PjxA from Penicillium janthinellum MA21601 has high specific activity under acidic condition and holds great potential for applications in the animal feed industry. To enhance the thermostability of xylanase PjxA, two mutation strategies in the N-terminal region were examined and then integrated into the xylanase to further improvement. The recombinant xylanase PTxA-DB (The meaning of DB is disulfide-bridge.) was constructed by replacement of five residues in the mutated region in TfxA (T10Y, N11H, N12D, Y15F, N30 L), combined with an additional disulfide bridge in the N-terminal region.

RESULTS

The T_m value of mutant PTxA-DB was improved from 21.3 °C to 76.6 °C, and its half-life was found to be 53.6 min at 60 °C, 107-fold higher than the wild type strain. The location of the disulfide bridge (T2C-T29C) was between the irregular loop and the β-strand A2, accounting for most of the improvement in thermostability of PjxA. Further analysis indicated T2C, T29C, N30 L and Y15F lead to increase N-terminal hydrophobicity. Moreover, the specific activity and substrate affinity of PTxA-DB were also enhanced under the acidic pH values.

CONCLUSIONS

These results indicated PTxA-DB could be a prospective additive to industrial animal feeds.

Characterizing a Halo-Tolerant GH10 Xylanase from Roseithermus sacchariphilus Strain RA and Its CBM-Truncated Variant

A halo-thermophilic bacterium, Roseithermus sacchariphilus strain RA (previously known as Rhodothermaceae bacterium RA), was isolated from a hot spring in Langkawi, Malaysia. A complete genome analysis showed that the bacterium harbors 57 glycoside hydrolases (GHs), including a multi-domain xylanase (XynRA2). The full-length XynRA2 of 813 amino acids comprises a family 4_9 carbohydrate-binding module (CBM4_9), a family 10 glycoside hydrolase catalytic domain (GH10), and a C-terminal domain (CTD) for type IX secretion system (T9SS). This study aims to describe the biochemical properties of XynRA2 and the effects of CBM truncation on this xylanase. XynRA2 and its CBM-truncated variant (XynRA2ΔCBM) was expressed, purified, and characterized. The purified XynRA2 and XynRA2ΔCBM had an identical optimum temperature at 70 °C, but different optimum pHs of 8.5 and 6.0 respectively. Furthermore, XynRA2 retained 94% and 71% of activity at 4.0 M and 5.0 M NaCl respectively, whereas XynRA2ΔCBM showed a lower activity (79% and 54%). XynRA2 exhibited a turnover rate (k_cat) of 24.8 s⁻¹, but this was reduced by 40% for XynRA2ΔCBM. Both the xylanases hydrolyzed beechwood xylan predominantly into xylobiose, and oat-spelt xylan into a mixture of xylo-oligosaccharides (XOs). Collectively, this work suggested CBM4_9 of XynRA2 has a role in enzyme performance.

GH-10 and GH-11 Endo-1,4-β-xylanase enzymes from Kitasatospora sp. produce xylose and xylooligosaccharides from sugarcane bagasse with no xylose inhibition

A novel strategy for the low-cost, high-yield co-production of xylose and xylooligosaccharides together with no xylose inhibition was developed using a novel heterologous expression of XYN10Ks_480 endo-1,4-β-xylanase with a ricin-type β-trefoil type of domain and XYN11Ks_480 endo-1,4-β-xylanase with a CBM 2 superfamily from the Kitasatospora sp in an actinomycetes expression system. Xylose is the main building block for hemicellulose xylan. Our findings demonstrated high levels of expression and catalytic activity for XYN10Ks_480 during hydrolysis of the extracted xylan of bagasse, and three types of xylan-based substrates were used to produce xylose and xylooligosaccharides. However, hydrolysis by XYN11Ks_480 produced xylooligosaccharides without xylose formation. This study demonstrated how integrating sodium hypochlorite-extracted xylan and enzymatic hydrolysis could provide an alternative strategy for the generation of XOS from lignocellulosic material.

Effect of disulfide bridge on hydrolytic characteristics of xylanase from Penicillium janthinellum

Highly efficient and stable enzymes are required for application in biotechnology, to meet the technical, environmental, and economic industrial demands. Xylanases are hemicellulolytic enzymes that degrade the heteroxylan constituent of the lignocellulosic plant cell wall. In this study, an acidic xylanase designated Pjxyn (pH 4.0) from Penicillium janthinellum was engineered by the introduction of a disulfide bridge. This strategy exploited the influence of the bridge on hydrolysis characteristics and enhanced hydrolysis was achieved. Three mutants [PjxynS(27)S(39), PjxynS(27)S(186), and PjxynS(39)S(186)] produced more xylose and xylobiose as hydrolysis products compared with the wild-type Pjxyn, when commercial xylans and lab-prepared water-insoluble corncob-xylan were used as the substrates, especial for the PjxynS(27)S(39) mutant, the content of xylose and xylobiose was 87.62% (using beechwood xylan) and 69.91% (using oat-spelt xylan) higher than that in the hydrolysis products of Pjxyn. Moreover, each mutant combined with the xylanase mutant T-XynFM effectively decreased the production of xylose with an optimum xylobiose yield. The findings demonstrate the potential industrial value of engineering xylanase to improve its hydrolytic properties and thermostability.