Preparation and optimization of self-assembled chondroitin sulfate-nisin nanogel based on quality by design concept

Co-encapsulation of Shirazi thyme (Zataria multiflora) essential oil and nisin using caffeic acid grafted chitosan nanogel and the effect of this nanogel as a bio-preservative in Iranian white cheese

The current study aims to co-encapsulate Shirazi thyme (Zataria multiflora) essential oil (ZEO) and nisin into chitosan nanogel as an antimicrobial and antioxidant agent to enhance the shelf-life of cheese. Chitosan-caffeic acid (CS-CA) nanogel was produced to co-encapsulate Zataria multiflora essential oil and nisin. This nanogel was characterized by dynamic light scattering (DLS), Fourier Transform Infrared (FTIR) spectroscopic analysis, X-ray diffraction (XRD) analysis, and scanning electron microscopy (SEM) images. The effect of free (TFZN) and encapsulated ZEO-nisin in chitosan nanogel (TCZN) on the chemical and microbiological properties of Iranian white cheese was assessed. The particle size, polydispersity index value (PDI), zeta potential, antioxidant activity, and encapsulation efficiency of the optimal chitosan-ZEO-nisin nanogel were 421.6 nm, 0.343, 34.0 mV, 71.06%-82.69%, and 41.3 ± 0.5%, 0.79 ± 0.06 mg/mL. respectively. FTIR and XRD approved ZEO and nisin entrapment within chitosan nanogel. The chitosan nanogel showed a highly porous surface with an irregular shape. The bioactive compounds of ZEO and nisin decreased the pH changes in cheese. On the 60th day of storage, the acidity of treated samples was significantly lower than that of control. Although the lowest anisidine index value was observed in samples treated with sodium nitrate (NaNO3) (TS), there was no significant difference between this sample and TCZN. The lowest microbial population was observed in TCZN and TS. After 60 days of ripening, Coliforms were not detected in the culture medium of TCZN and TS. The results can contribute to the development of a natural preservative with the potential for application in the dairy industry.

Exploring the chondroitin sulfate nanogel's potential in combating nephrotoxicity induced by cisplatin and doxorubicin-An in-vivo study on rats

In this study, we aim to unveil the potential of itaconyl chondroitin sulfate nanogel (ICSNG) in tackling chronic kidney diseases triggered by the administration of CDDP and doxorubicin (Adriamycin, ADR). To that end, the new drug delivery system (ICSNG) was initially prepared, characterized, and loaded with the target drugs. Thereafter, the in-vivo studies were performed using five equally divided groups of 100 male Sprague-Dawley (SD) rats. Biochemical evaluation and immunohistochemistry studies have revealed the renal toxicity and the ameliorative effects of ICSNG on renal function. When ICSNG-based treatments were contrasted with the CDDP and ADR infected groups, they significantly increased paraoxonase-1 (PON-1), superoxide dismutase (SOD), catalase (CAT) and albumin activity and significantly decreased nitric oxide (NO), tumor necrosis factor alpha (TNF-α), creatinine, urea, and cyclooxygenase-2 (COX-2) activity (p < 0.001). The findings of the current study imply that ICSNG may be able to lessen renal inflammation and damage in chronic kidney disorders brought on by the administration of CDDP and ADR. Interestingly, according to the estimated selectivity indices, the ICSNG-encapsulated drugs have demonstrated superior selectivity for cancer MCF-7 cells, over healthy HSF cells, in comparison to the bare drugs.

Biomimetic triumvirate nanogel complexes via peptide-polysaccharide-polyphenol self-assembly

Self-assembled peptide and polysaccharide nanogels are excellent candidates for bioactive delivery vectors. However, there are still significant challenges in the application of nanogels as delivery tools for bioactive elements. This study aims to deliver, and control the release of a hydrophobic bioactive flavonoid hesperidin. Using the self-assembling peptide (SAP) Fmoc-FRGDF, extracellular matrix mimicking nanofibrils were fabricated, which were decorated and bolstered with immunomodulatory polysaccharide strands of fucoidan and infused with hesperidin. The mechanical properties, secondary structure, and microscopic morphologies of the composite hydrogels were characterized using rheometer, FTIR, XRD, and TEM, etc. The encapsulation efficiency (EE) and release behavior of hesperidin were determined. Coassembly of the SAP with fucoidan improved the mechanical properties (from 9.54 Pa of Fmoc-FRGDF hydrogel to 7735 Pa of coassembly hydrogel at 6 mg/mL fucoidan concentration), formed thicker nanofibril bundles at 4 and 6 mg/mL fucoidan concentration, improved the EE of hesperidin from 72.86 % of Fmoc-FRGDF hydrogel to over 90 % of coassembly hydrogels, and showed effectively controlled release of hesperidin in vitro. Intriguingly, the first order kinetic model predicted an enhanced hydrogel retention and release of hesperidin. This study revealed a new approach for bioengineered nanogels that could be used to stabilize and release hydrophobic payloads.

Exploring potential of diacerin nanogel for topical application in arthritis: Formulation development, QbD based optimization and pre-clinical evaluation

Diacerein (DCN) is a chondroprotective agent which shows inadequate oral bioavailability along with gastrointestinal side effects. This study is intended to develop a topical novel DCN delivery system. DCN nanogel was prepared by emulsion solvent diffusion technique. The formulation was optimized by response surface methodology by taking two independent variables, concentration of carbopol 940 and eudragit RSPO and three dependent variables, particle size, % entrapment efficiency (EE) and % drug release at 24 h. The optimized formulation had adequat% EE, % drug release at 24 h and particle size. The particle size for optimized nanogel was 190.3 nm with % EE of 83.51% whereas % drug release at 24 h was found 90.13%. The optimized DCN nanogel was analyzed by differential scanning calorimetry (DSC), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (DTIR) and transmission electron microscopy (TEM) studies. The drug release kinetic study has shown that the gel followed Higuchi's model and the diffusion was anomalous in nature. The nanogel was characterized for physical examination, viscosity, homogeneity and stability parameters and the results obtained were found upto the mark. The ex-vivo permeation study data was in correlation with results of in-vitro study. In-vivo anti-arthritic study proved the efficacy of developed formulation for arthritis in Freund's Adjuvant Arthritic model. This research work has proved the significant potential of innovated product for arthritis by topical route, as it overcomes the drawbacks of oral route, highly efficient, sustained and targeted the release of drug without any accumulation and toxicity.

The progress of research on the application of redox nanomaterials in disease therapy

Redox imbalance can trigger cell dysfunction and damage and plays a vital role in the origin and progression of many diseases. Maintaining the balance between oxidants and antioxidants in vivo is a complicated and arduous task, leading to ongoing research into the construction of redox nanomaterials. Nanodrug platforms with redox characteristics can not only reduce the adverse effects of oxidative stress on tissues by removing excess oxidants from the body but also have multienzyme-like activity, which can play a cytotoxic role in tumor tissues through the catalytic oxidation of their substrates to produce harmful reactive oxygen species such as hydroxyl radicals. In this review, various redox nanomaterials currently used in disease therapy are discussed, emphasizing the treatment methods and their applications in tumors and other human tissues. Finally, the limitations of the current clinical application of redox nanomaterials are considered.

The nanotechnological approach for nasal delivery of peptide drugs: a comprehensive review

This review gathers recent studies, patents, and clinical trials involving the nasal administration of peptide drugs to supply a panorama of developing nanomedicine advances in this field. Peptide drugs have been featured in the pharmaceutical market, due to their high efficacy, biological activity, and low immunogenicity. Pharmaceutical industries need technology to circumvent issues relating to peptide stability and bioavailability. The oral route offers very harsh and unfavourable conditions for peptide administration, while the parenteral route is inconvenient and risky for patients. Nasal administration is an attractive alternative, mainly when associated with nanotechnological approaches. Nanomedicines may improve the nasal administration of peptide drugs by providing protection for the macromolecules from enzymes while also increasing their time of retention and permeability in the nasal mucosa. Nanomedicines for nasal administration containing peptide drugs have been acclaimed for both prevention, and treatment, of infections, including the pandemic COVID-19, cancers, metabolic and neurodegenerative diseases.

Nanohydrogels: Advanced Polymeric Nanomaterials in the Era of Nanotechnology for Robust Functionalization and Cumulative Applications

In the era of nanotechnology, the synthesis of nanomaterials for advanced applications has grown enormously. Effective therapeutics and functionalization of effective drugs using nano-vehicles are considered highly productive and selectively necessary. Polymeric nanomaterials have shown their impact and influential role in this process. Polymeric nanomaterials in molecular science are well facilitated due to their low cytotoxic behavior, robust functionalization, and practical approach towards in vitro and in vivo therapeutics. This review highlights a brief discussion on recent techniques used in nanohydrogel designs, biomedical applications, and the applied role of nanohydrogels in the construction of advanced therapeutics. We reviewed recent studies on nanohydrogels for their wide applications in building strategies for advantageously controlled biological applications. The classification of polymers is based on their sources of origin. Nanohydrogel studies are based on their polymeric types and their endorsed utilization for reported applications. Nanotechnology has developed significantly in the past decades. The novel and active role of nano biomaterials with amplified aspects are consistently being studied to minimize the deleterious practices and side effects. Here, we put forth challenges and discuss the outlook regarding the role of nanohydrogels, with future perspectives on delivering constructive strategies and overcoming the critical objectives in nanotherapeutic systems.

Dual-responsive nisin loaded chondroitin sulfate nanogel for treatment of bacterial infection in soft tissues

Chondroitin sulfate-Nisin nanogels (CS-N NGs) were prepared by electrostatic interaction for nisin delivery as an antibacterial agent in the treatment of bacterial infections caused by some clinical strains of methicillin-resistant and methicillin-sensitive Staphylococcus aureus (S. aureus). The physical properties of CS-N NGs were evaluated using Fourier-transform infrared spectroscopy, dynamic light scattering, and field emission scanning electron microscopy. The average diameter of obtained CS-N NGs was about 65 nm and the stability of nanogels was assessed by zeta potential measurement. Enzyme and pH-responsibility of CS-N NGs due to the presence of susceptible bonds in chondroitin sulfate resulted in effective and controlled release of nisin in the simulated infectious medium. Also, the ability of prepared CS-N NGs for eradicating clinical methicillin resistance S. aureus strain was confirmed by Broth Microdilution Method (BMD) and the cytotoxicity analysis was carried out on Human Dermal Fibroblast (HDF) cells by MTT assay method. Based on the results, this versatile drug carrier could efficiently deliver the cationic antimicrobial peptides as a natural antibiotic for growth inhibition of methicillin-resistant S. aureus strains and further destroying the bacteria in the treatment of subcutaneous infections caused by methicillin-resistant S. aureus strains.

Synthesis and characterization of Schiff base containing bovine serum albumin-gum arabic aldehyde hybrid nanogels via inverse miniemulsion for delivery of anticancer drug

The periodate modified gum arabic was used as a natural-based, non-toxic cross-linker to synthesize hybrid bovine serum albumin-gum arabic aldehyde (BSA-GAA) nanogels by Schiff base reaction through the inverse miniemulsion method for the first time. The synthesis process was performed in the absence of toxic organic solvents using fractionated coconut oil as the continuous phase. The particle size of the nanogels was managed by tweaking the concentration of the surfactants (Span 80/Tween 80) and the total volume of the aqueous phase. Based on the bicinchoninic acid method, the cross-linking efficiency of BSA and GAA was estimated at 98%. 5-fluorouracil (5-FU) was selected as the sample drug. The 5-FU-loaded hybrid nanogels showed a spherical morphology with an average diameter of 231.33 ±12.74 nm and a zeta potential of -31.6 mV. The encapsulation and loading efficiency of the nanogels were calculated at 42 ± 4.52% and 2.37 ± 0.59%, respectively. The properties of the hybrid nanogels were analyzed by dynamic light scattering (DLS), Fourier transform infrared microscopy (FTIR) analysis, field emission scanning electron microscopy (FE-SEM), and thermogravimetric analysis (TGA). The pH sensitivity of the hybrid nanogels was confirmed by the in vitro release profiles of 5-FU in different buffers. Hemolysis assay revealed the in vitro hemocompatibility of the hybrid nanogels which inhibited the growth of MCF-7 cells with an IC50 value of 16.21 μM. The present study suggested that these biobased hybrid nanogels could have a great potential in drug delivery and other biomedical applications.

Thermoresponsive Nanogels Based on Different Polymeric Moieties for Biomedical Applications

Nanogels, or nanostructured hydrogels, are one of the most interesting materials in biomedical engineering. Nanogels are widely used in medical applications, such as in cancer therapy, targeted delivery of proteins, genes and DNAs, and scaffolds in tissue regeneration. One salient feature of nanogels is their tunable responsiveness to external stimuli. In this review, thermosensitive nanogels are discussed, with a focus on moieties in their chemical structure which are responsible for thermosensitivity. These thermosensitive moieties can be classified into four groups, namely, polymers bearing amide groups, ether groups, vinyl ether groups and hydrophilic polymers bearing hydrophobic groups. These novel thermoresponsive nanogels provide effective drug delivery systems and tissue regeneration constructs for treating patients in many clinical applications, such as targeted, sustained and controlled release.

Self-assembled formation of chondroitin sulfate-based micellar nanogel for curcumin delivery to breast cancer cells

Nanogel based drug delivery systems have been broadly used for cancer treatment. In this research, octadecylamine was grafted to chondroitin sulfate using three different mole ratios (10, 20, and 30) and named CS-ODA1, 2, and 3, respectively. The amide bond formation between chondroitin sulfate and octadecylamine was confirmed by 1H-nuclear magnetic resonance (HNMR) in the CS-ODA3 sample; therefore, further analysis was performed on this sample. Curcumin was loaded at defined Cur/CS-ODA ratios (5, 10 and 15%) and CS-ODA3 with 10% curcumin was selected for further experiments due to more entrapment efficiency (79.56% ± 5.56). In vitro release profile of the curcumin loaded nanogels showed >80% release after 70 h. In addition, the results of MTT analysis on the MCF-7 cell line showed almost no toxicity toward blank nanogels, while curcumin-loaded nanogels induced significant death after 24 h. In the end, analysis of the cell cycle using MCF-7 cells also confirmed the cytotoxicity of curcumin loaded nanogels. This study also showed that the presence of curcumin loaded chondroitin sulfate nanogels could successfully increase cellular uptake in comparison with free curcumin. The synthesized nanogels containing curcumin are expected to be effective for further studies in cancer treatment.

Nisin/polyanion layer-by-layer films exhibiting different mechanisms in antimicrobial efficacy

Nisin/polyanion Layer-by-Layer (LbL) films are reported to exhibit different mechanisms in antimicrobial efficacy depending on the type of polyanion. LbL films consisting of nisin as the polycationic component were prepared using two different polyanionic constituents: poly acrylic acid (PAA) and dextran sulfate (DX). Due to the weaker interaction strength of carboxylate groups with nisin compared to sulfate/nisin, a larger molecular weight of PAA was needed to achieve LbL assembly. PAA-100K/nisin and DX-15K/nisin multilayer films exhibited significantly different properties. PAA–nisin films grew faster compared to DX–nisin films and showed, for 60 bilayer films, an average bilayer thickness of 21.6 nm compared to that of 6.1 nm in DX–nisin films. The total amount of nisin was found to be 17.1 ± 2.2 μg cm⁻² in (PAA–nisin)₆₀ and 6.8 ± 0.4 μg cm⁻² in (DX–nisin)₆₀ films. The stability of the films was investigated at three different pH values of 6.0, 7.4 and 9.5. (PAA–nisin)₆₀ films exhibited the release of nisin into the solution which resulted in the disintegration of the film over several hours. A burst release was observed in the first hour followed by a slower release and disintegration over 24 hours with a complete release at pH 9.5. The bacterial growth inhibition test against Staphylococcus epidermidis confirmed the antimicrobial activity of nisin released from PAA–nisin films. PAA was found to stabilize nisin and the film-released nisin retained its antimicrobial activity in the neutral and alkaline pH values. Unlike PAA–nisin films, (DX–nisin)₆₀ films were stable at the physiological conditions up to 14 days with no release of nisin. DX–nisin films were found to inhibit the attachment of Staphylococcus epidermidis and prevent biofilm formation. These results clearly demonstrate the effect of different polyanions on nisin LbL films to achieve different mechanisms in antimicrobial efficacy and show the potential of PAA–nisin multilayer films as promising local delivery systems for treatment of burns and wounds, while DX–nisin multilayer films can be employed as stable coatings against bacterial attachment and biofilm formation.

Polyanion–nisin multilayer films exhibit antimicrobial activity by controlled release of nisin or as stable biofilm inhibiting coatings depending on polyanion.

Preparation and Characterization of Nanocomposite Scaffolds (Collagen/β-TCP/SrO) for Bone Tissue Engineering

Background

Nowadays, production of nanocomposite scaffolds based on natural biopolymer, bioceramic, and metal ions is a growing field of research due to the potential for bone tissue engineering applications.

Methods

In this study, a nanocomposite scaffold for bone tissue engineering was successfully prepared using collagen (COL), beta-tricalcium phosphate (β-TCP) and strontium oxide (SrO). A composition of β-TCP (4.9 g) was prepared by doping with SrO (0.05 g). Biocompatible porous nanocomposite scaffolds were prepared by freeze-drying in different formulations [COL, COL/β-TCP (1:2 w/w), and COL/β-TCP-Sr (1:2 w/w)] to be used as a provisional matrix or scaffold for bone tissue engineering. The nanoparticles were characterized by X-ray diffraction, Fourier transforms infrared spectroscopy and energy dispersive spectroscopy. Moreover, the prepared scaffolds were characterized by physicochemical properties, such as porosity, swelling ratio, biodegradation, mechanical properties, and biomineralization.

Results

All the scaffolds had a microporous structure with high porosity (~ 95-99%) and appropriate pore size (100-200 μm). COL/β-TCP-Sr scaffolds had the compressive modulus (213.44 ± 0.47 kPa) higher than that of COL/β-TCP (33.14 ± 1.77 kPa). In vitro cytocompatibility, cell attachment and alkaline phosphatase (ALP) activity studies performed using rat bone marrow mesenchymal stem cells. Addition of β-TCP-Sr to collagen scaffolds increased ALP activity by 1.33-1.79 and 2.92-4.57 folds after 7 and 14 days of culture, respectively.

Conclusion

In summary, it was found that the incorporation of Sr into the collagen-β-TCP scaffolds has a great potential for bone tissue engineering applications.

Carbohydrate-based nanomaterials for biomedical applications

Carbohydrates are abundant biomolecules, with a strong tendency to form supramolecular networks. A host of carbohydrate-based nanomaterials have been exploited for biomedical applications. These structures are based on simple mono- or disaccharides, as well as on complex, polymeric systems. Chemical modifications serve to tune the shapes and properties of these materials. In particular, carbohydrate-based nanoparticles and nanogels were used for drug delivery, imaging, and tissue engineering applications. Due to the reversible nature of the assembly, often based on a combination of hydrogen bonding and hydrophobic interactions, carbohydrate-based materials are valuable substrates for the creations of responsive systems. Herein, we review the current research on carbohydrate-based nanomaterials, with a particular focus on carbohydrate assembly. We will discuss how these systems are formed and how their properties are tuned. Particular emphasis will be placed on the use of carbohydrates for biomedical applications. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.