Rational design and evaluation of HBsAg polymeric nanoparticles as antigen delivery carriers

Targeted polymeric primaquine nanoparticles: optimization, evaluation, and in-vivo liver uptake for improved malaria treatment

Primaquine (PQ) is a widely used antimalarial drug, but its high dosage requirements can lead to significant tissue damage and adverse gastrointestinal and hematological effects. Recent studies have shown that nanoformulations can enhance the bioavailability of pharmaceuticals, thereby increasing efficacy, reducing dosing frequency, and minimizing toxicity. In this study, PQ-loaded PLGA nanoparticles (PQ-NPs) were prepared using a modified double emulsion solvent evaporation technique (w/o/w). The PQ-NPs exhibited a mean particle size of 228 ± 2.6 nm, a zeta potential of +27.4 mV, and an encapsulation efficiency of 81.3 ± 3.5%. Scanning electron microscopy (SEM) confirmed their spherical morphology, and the in vitro release profile demonstrated continuous drug release over 72 h. Differential scanning calorimetry (DSC) thermograms indicated that the drug was present in the nanoparticles, with improved physical stability. Fourier-transform infrared spectroscopy (FTIR) analysis showed no interactions between the various substances in the NPs. In vivo studies in Swiss albino mice infected with Plasmodium berghei revealed that the nanoformulated PQ was 20% more effective than the standard oral dose. Biodistribution studies indicated that 80% of the NPs accumulated in the liver, highlighting their potential for targeted drug delivery. This research demonstrates the successful development of a nanomedicine delivery system for antimalarial drugs, offering a promising strategy to enhance treatment efficacy while reducing adverse effects.

Dual combination of resveratrol and pterostilbene aqueous core nanocapsules for integrated prostate cancer targeting

Aim: Development and evaluation of aqueous core nanocapsules (ACNs) of BCS-II-class drug like resveratrol (RSV) and pterostilbene (PTE) for prostate cancer.Materials & methods: Identify synergistic effects of molar ratios of RSV and PTE against PC-3 cell. Selected ratio of drugs was added to ACNs by double-emulsification-method using Box-Behnken design. Further, assessed for physicochemical characterization, release kinetics, compatibility, in vitro cytotoxicity, in vivo pharmacokinetic and biodistribution studies.Results: Selected 1:1 ratio of RSV and PTE had greatest synergy potential have smaller particle-size (128.1 ± 3.21 nm), zeta-potential (-22.12 ± 0.2 mV), 0.53 PDI, improved encapsulation (87% for RSV, 72% for PTE), stable, no systemic toxicity, high biodistributed/accumulated in prostate cells.Conclusion: ACNs exhibited high t1/2 (12.42 ± 1.92 hs) and 8.20 ± 8.21 hs Mean Residence Time and lower clearance, proving the high effectiveness for prostate cancer.

Optimisation and in-vivo evaluation of extracted Karanjin loaded liposomal topical formulation for treatment of psoriasis in tape-stripped mouse model

AIM

The present work is focus on development of anti-psoriasis activity of Karanjin (isolated from Pongamia pinnata seed oil) loaded liposome based lotion for enhancement of skin permeation and retention.

METHOD

Karanjin was isolated using liquid-liquid extraction method and characterised by HPLC analysis and partition coefficient. Further, isolated Karanjin was loaded into liposomes using thin-film hydration technique and optimised by Box-Behnken design. Selected optimised batch was characterised their mean diameter, PDI, zeta potential, and entrapment efficiency, morphology (by TEM), FTIR and ex-vivo skin retention. Additionally, Karanjin loaded liposomes were formulated into lotion and characterise their rheological, spreadability, texture, ex-vivo skin permeation & retention, stability and anti-psoriatic activity in mouse tail model.

RESULT

The yield of Karanjin from seed oil was 0.1% w/v and have lipophilic nature. The optimised liposomal formulation showed 195 ± 1.8 nm mean diameter, 0.271 ± 0.02 PDI, -27.0 ± 2.1 mV zeta potential and 61.97 ± 2.5% EE. TEM image revel the spherical shap of liposome surrounded by single phospholipid bilayer and no interection between drug and excipients. Further, lotion was prepared by 0.1% w/v carbopol and found to 615 mPa.sec viscosity, good thixotropic behaviour, spreadability and texture. There was 22.44% increase in drug permeation for Karanjin loaded liposomal lotion compared to pure Karanjin lotion, confirm by ex-vivo permeation and retention. While, in-vivo study revel the liposomal lotion of Karanjin was found to have 16.09% higher drug activity then 5% w/w conventional Karanjin lotion.

CONCLUSION

Karanjin loaded liposomal lotion have an effective anti-psoriatic agent and showed better skin permeation and retention than the conventional Karanjin lotion.

Is it advantageous to use quality by design (QbD) to develop nanoparticle-based dosage forms for parenteral drug administration?

Parenteral administration is one of the most commonly used drug delivery routes for nanoparticle-based dosage forms, such as lipid-based and polymeric nanoparticles. For the treatment of various diseases, parenteral administration include intravenous, subcutaneous, and intramuscular route. In drug development phase, multiparameter strategy with a focus on drug physicochemical properties and the specificity of the administration route is required. Nanoparticle properties in terms of size and targeted delivery, among others, are able to surpass many drawbacks of conventional dosage forms, but these unique properties can be a bottleneck for approval by regulatory authorities. Quality by Design (QbD) approach has been widely utilized in development of parenteral nanoparticle-based dosage forms. It fosters knowledge of product and process quality by involving sound scientific data and risk assessment strategies. A full and comprehensive investigation into the state of implementation and applications of the QbD approach in these complex drug products can highlight the gaps and challenges. In this review, the analysis of critical attributes and Design of Experiment (DoE) approach in different nanoparticulate systems, together with the proper utilization of Process Analytical Technology (PAT) applications are described. The essential of QbD approach for the design and development of nanoparticle-based dosage forms for delivery via parenteral routes is discussed thoroughly.

Novel therapeutic approaches for the management of hepatitis infections

Hepatitis B virus (HBV) & hepatitis C virus (HCV) infection is a substantial reason for morbidity and mortality around the world. Chronic hepatitis B (CHB) infection is connected with an enhanced risk of liver cirrhosis, liver decompensation and hepatocellular carcinoma (HCC). Conventional therapy do face certain challenges, for example, poor tolerability and the growth of active resistance. Thus, novel treatment procedures are essential to accomplish the initiation of strong and stable antiviral immune reactions of the individuals. This review explores the current nanotechnology-based carriers for drug and vaccine delivery to treat HBV and HCV.

Design and evaluations of a nanostructured lipid carrier loaded with dopamine hydrochloride for intranasal bypass drug delivery in Parkinson's disease

AIM

The goal of this study is to optimisation and evaluation of dopamine-loaded NLC (NLC-DOPA) for achieve dopamine concentrations into brain for treatment of Parkinson's disease which causes progressive neuronal death.

METHOD

NLC-DOPA prepared by homogenisation method using solid lipids (Cholesterol and Soya lecithin), liquid lipid (Oleic acid) and surfactant (Poloxamer- 188) as major excipients, optimised by central composite design using design expert-13 software. The optimised formulations were characterised by particle size, zeta potential, entrapment efficiency, SEM, TEM, FTIR, DSC, XRD, stability study and in-vitro drug release. The histopathology of rat brain tissues and goat nasal tissues were performed. The ex-vivo (permeability and nasal ciliotoxicity study) and in vivo pharmacodynamics study were also accomplished to determine its efficacy and potency of NLC.

RESULT

The NLC-DOPA formulations were optimised in particle size and (EE)% with range from 85.53 ± 0.703 to 106.11 ± 0.822 nm and 82.17 ± 0.794 to 95.45 ± 0.891%, respectively. The optimised formulation F11 showing best goodness-fitted model kinetic, followed by Korsmeyer-Peppas equation and zero order kinetic. The SEM and TEM confirmed the spherical and smooth morphology of formulation. FTIR and DSC spectra were given compatibility of compound and XRD diffractograms confirmed the amorphous nature. An ex-vivo study was showed the high permeability coefficient (6.67*1 0 -4 cm/min, which is twice, compare to pure drug) and there was no damage in nasal mucosa, confirmed by the ciliotoxicity study. In-vivo study was shown significant effects of optimised NLC-DOPA on locomotor activity, force-swimming test and neurochemical assessment using rotenone induced Parkinson's model on Albino Wistar rats.

CONCLUSION

NLC-DOPA was prepared and optimised successfully with increased bioavailability of drug from the NLC into brain with reduce toxicity in effective treatment of Parkinson's disease.

Grafting, characterization and enhancement of therapeutic activity of berberine loaded PEGylated PAMAM dendrimer for cancerous cell

Berberine is an anticancer medication that generates side effects due to its hydrophobicity and low cellular promiscuity as well as high dose requirement. Thus, have to prepare PEGylated dendrimer conjugates which increases the targeting and release of chemotherapeutic drugs at the tumor site although falling the adverse side effects. The circulation time of drug is enhanced by PEGylation. It is the covalent attachment of PEG to therapeutic protein or any molecule. PEGylated berberine dendrimer was prepared by biotinylation cross linking method and characterized by particle size, zeta potential, entrapment efficiency, in vitro release and stability study. The Structure validation of berberine before and after grafting was confirmed by FTIR and NMR spectroscopy. Further prepared PEGylated complex were proceeded for the cellular uptake study in AMJ-13, and BT-20 cells line by fluorescent microscopy study and MTT assay cytotoxicity study in MCF-7 cell line. The prepared PEGylated formulation showed nanometric size, desired zeta potential, and 69.56 ± 23% entrapment efficiency. The prepared PEGylated particle showed 70.23% release at 72 h with good stability at 90 days. The cellular uptake of formulation was highly appreciable which is clearly observed in AMJ-13 and BT-20 cells line. In comparison to pure drug, developed formulation has 10.8 M high efficiency for breast cancer cell line. PEGylation is easy and reasonable way, as it requires lesser time and is proved to be superior technique for treatment of cancer.

Polymeric nanomedicines for the treatment of hepatic diseases

The liver is an important organ in the human body and performs many functions, such as digestion, detoxification, metabolism, immune responses, and vitamin and mineral storage. Therefore, disorders of liver functions triggered by various hepatic diseases, including hepatitis B virus infection, nonalcoholic steatohepatitis, hepatic fibrosis, hepatocellular carcinoma, and transplant rejection, significantly threaten human health worldwide. Polymer-based nanomedicines, which can be easily engineered with ideal physicochemical characteristics and functions, have considerable merits, including contributions to improved therapeutic outcomes and reduced adverse effects of drugs, in the treatment of hepatic diseases compared to traditional therapeutic agents. This review describes liver anatomy and function, and liver targeting strategies, hepatic disease treatment applications and intrahepatic fates of polymeric nanomedicines. The challenges and outlooks of hepatic disease treatment with polymeric nanomedicines are also discussed.

A Comprehensive Review on Liver Targeting: Emphasis on Nanotechnology- based Molecular Targets and Receptors Mediated Approaches

BACKGROUND

The pathogenesis of hepatic diseases involves several cells, which complicates the delivery of pharmaceutical agents. Many severe liver diseases affecting the worldwide population cannot be effectively treated. Major hindrances or challenges are natural physiological barriers and non-specific targeting of drugs administered, leading to inefficient treatment. Hence, there is an earnest need to look for novel therapeutic strategies to overcome these hindrances. A kind of literature has reported that drug safety and efficacy are incredibly raised when a drug is incorporated inside or attached to a polymeric material of either hydrophilic or lipophilic nature. This has driven the dynamic investigation for developing novel biodegradable materials, drug delivery carriers, target-specific drug delivery systems, and many other novel approaches.

OBJECTIVE

Present review is devoted to summarizing receptor-based liver cell targeting using different modified novel synthetic drug delivery carriers. It also highlights recent progress in drug targeting to diseased liver mediated by various receptors, including asialoglycoprotein, mannose and galactose receptor, Fc receptor, low-density lipoprotein, glycyrrhetinic, and bile acid receptor. The essential consideration is given to treating liver cancer targeting using nanoparticulate systems, proteins, viral and non-viral vectors, homing peptides and gene delivery.

CONCLUSION

Receptors based targeting approach is one such approach that was explored by researchers to develop novel formulations which can ensure site-specific drug delivery. Several receptors are on the surfaces of liver cells, which are highly overexpressed in various disease conditions. They all are helpful for the treatment of liver cancer.

Leveraging the Exploratory and Predictive Capabilities of Design of Experiments in Development of Intraarticular Injection of Imatinib Mesylate Containing Lipospheres

An intraarticular, liposphere-based, formulation of Imatinib mesylate for weekly administration was developed. Lipospheres were prepared using double emulsion technique using dierucoyl phosphatidylcholine, 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1-glycerol) sodium salt), cholesterol, and tricaprylin as lipid phase in dichloromethane in a four-step process. Primary emulsion, formed using a high-pressure homogenizer, was diluted using a secondary aqueous phase in an Inline mixer to form the liposomal dispersion. Nitrogen flushing was done to remove dichloromethane, and the dispersion was finally centrifuged and adjusted for potency. The amount of cholesterol and triglyceride was taken as formulation variables, and speed of homogenization was used as a process variable in the Box-Behnken design while particle size, % drug entrapment, and drug release at the end of 4 h and 5 days were taken as response variables. Multivariate data analysis grouped the variables in two latent variable sets, one based on the speed and the other on the composition of lipospheres. Multiple linear regression analysis was used to generate mathematical model for each response. Constraints were put on the values of responses, as per the requirements of the final product, and the "freedom to operate" design space was located using an overlay plot. The center point batch sufficed all the set criteria, and Monte Carlo simulations on the factor variables indicated a defect rate of 5%. The center point batch was characterized for viscosity, osmolality, pH, drug release, and lipocrit value. The dispersion was charged in a prefilled syringe and studied for stability. The product was found to be stable at 2-8°C over a period of 6 months.

Development, evaluation, pharmacokinetic and biodistribution estimation of resveratrol-loaded solid lipid nanoparticles for prostate cancer targeting

BACKGROUND AND AIM

The study was to extend systemic circulation and biological half-life (t_1/2) of trans-resveratrol (RSV) using solid lipid nanoparticles (RSV-SLN) to improve its anti-cancer potential.

METHODS

RSV-SLN was prepared by solvent emulsification evaporation technique and proceeded for evaluation like particle size, PDI, zeta potential, in vitro release, in vitro cytotoxicity, cellular internalisation, haemolysis and erythrocyte membrane integrity, platelet aggregation and pharmacokinetic studies in rats. Moreover, cancer cells accumulation of RSV-SLN also needs to be evaluated for proving their targeting ability.

RESULT

Prepared SLN showed 126.85 ± 12.09 nm particle size, -24.23 ± 3.27 mV Zeta potential and 74.67 ± 4.76%. release at 48 h and haemocompatible. The cellular internalisation image showed the SLN reach in a cytoplasm and nucleus of PC3 prostate cells. RSV-SLN exhibited high t_1/2 (8.22 ± 1.36 h) and 7.19 ± 0.69 h MRT (Mean residence time) and lower clearance i.e. 286.42 ± 13.64 mL/min/kg. The bio-distribution of RSV-SLN was found to be extremely high in prostate cells and accumulate 7.56 times greater than that of RSV solution.

CONCLUSION

The developed RSV-SLN can be applied as potential carrier for delivery of drug of chemotherapeutics at an extend systemic circulation and targeting efficiency at tumour site.

Intranasal drug delivery of sumatriptan succinate-loaded polymeric solid lipid nanoparticles for brain targeting

Migraine is a frequent neurological condition characterized by throbbing headaches, nausea, photophobia, and phonophobia, among other symptoms. Sumatriptan belongs to a BCS class III, which exhibits poor oral bioavailability and several side-effects. The objective of the present study was to develop solid lipid nanoparticles (SLNPs) of sumatriptan succinate for brain targeting by nasal route. Solvent injection method was used to increase the entrapment efficiency of hydrophilic drug. Thus, formulation was optimized by central composite design with minimum particle size, optimized zeta potential, and maximum entrapment efficiency, which was found to be 133.4 nm, -17.7 mV, and 75.5%, respectively. Optimized batch was further evaluated for surface morphology, Fourier-transform infrared spectroscopy, in vitro release, permeation across nasal mucosa, and histopathology. It was seen that most of the particles were spherical in shape as confirmed by scanning electron microscopy and transmission electron microscopy. The release of drug through the lipid showed initial burst release followed by sustained release up to 12 h. The ex vivo diffusion study using goat nasal mucosa at pH 6.8 revealed that SLNPs permeation across nasal mucosa was quick, which was sufficient for brain targeting. Histopathology studies further revealed integrity of nasal mucosa after treatment with SLNPs. The investigation indicated that hydrophilic drug, sumatriptan succinate can be successfully entrapped in SLNPs to target brain via nasal delivery, and thus it could be an effective approach for nose-to-brain delivery.

Oral organic nanovaccines against bacterial and viral diseases

Vaccines have saved millions of humans and animals from deadly diseases. Many vaccines are still under development to fight against lethal diseases. Indeed, subunit vaccines are a versatile approach with several advantageous attributes, but they lack strong immunogenicity. Nanotechnology is an avenue to vaccine development because nanoparticles may serve as nanocarriers and adjuvants, which are critical aspects for oral vaccines. This review provides an update of oral organic nanovaccines, describing suitable nanomaterials for oral vaccine design and recent (last five-year view) oral nanovaccine developments to fight against those principal pathogens causing human and animal diseases.

Dual Vinorelbine bitartrate and Resveratrol Loaded Polymeric Aqueous core Nanocapsules for Synergistic Efficacy in Breast Cancer

AIM

The current study focused on the development and evaluation of aqueous core nanocapsules (ACNs) as an effective carrier to deliver an optimal synergistic combination of a highly water soluble Vinorelbine bitartrate (VRL) and a poorly water-soluble Resveratrol (RES) for treatment of breast cancer.

METHODS

Various molar ratios of VRL to RES were screened against MCF-7 cell lines to determine the synergistic effects using Chou-Talalay method. Synergistic ratio of therapeutic agents was then incorporated into aqueous core nanocapsules utilizing a double emulsion solvent evaporation technique to yield dual drug loaded nanocapsules (dd-ACNs). The dd-ACNs were optimized using Box-Behnken design and characterized for physicochemical parameters such as particle size, zeta potential, polydispersity index, total drug content and encapsulation efficiency, surface morphology, drug excipient compatibility by FTIR and DSC, release kinetics, toxicity studies and anticancer efficacy (in-vitro and in-vivo).

RESULTS

Results demonstrated that the combination exhibited maximum synergy when higher doses of VRL were combined with smaller doses of RES (1:1, 5:1, and 10:1). The dual drug loaded ACNs were found to be stable and depicted a core-shell structure, narrow size range (150.2 ± 3.2 nm) with enhanced encapsulation (80% for VRL and 99% for RES). Moreover, the dd-ACNs were 5 times more efficacious in-vitro than a combination of free drugs, while reducing systemic toxicity. Also, pre-clinical evaluation of dd-ACNs also depicted drastic reduction of tumor volume as compared tp pristine VRL and physical combination of drugs.

CONCLUSION

The developed dd-ACNs can be applied as potential carrier for delivery of combination of chemotherapeutics at a synergistic ratio at tumor site.

Recent Advances in Drug Design and Delivery Across Biological Barriers using Computational Models

Abstract:

The systemic delivery of pharmacological substances generally exhibits several significant limitations associated with the bio-distribution of active drugs in the body. As per consequence, human body’s defense mechanisms become impediments to drug delivery. Various technologies to overcome these limitations have been evolved including computational approaches and advanced drug delivery. As the body of human has evolved to defend itself from hostile biological as well as chemical invaders, along with that these biological barriers such as ocular barriers, blood-brain barriers, intestinal and skin barriers also limit the passage of drugs across desired sites. Therefore, efficient delivery remains an utmost challenge for researchers and scientists. The present review focuses on the techniques to deliver the drugs with efficient therapeutic efficacy at the targeted sites. This review article considered the insights into main biological barriers along with the application of computational or numerical methods dealing with different barriers by determining the drug flow, temperature and various other parameters. It also summarizes the advanced implantable drug delivery system to circumvent the inherent resistance showed by these biological barriers and in turn to improve the drug delivery.

Poly(Lactide-co-Glycolide) Nanoparticle-Mediated Vaccine Delivery of Encapsulated Surface Antigen Protein of Hepatitis B Virus Elicits Effective Immune Response

Hepatitis B viral infection is one of the most important infectious diseases of the liver worldwide. Chronic infection with HBV often leads to cirrhosis and hepatocellular carcinoma. The currently licensed hepatitis B vaccine consists of recombinant hepatitis B surface antigen adsorbed into aluminum adjuvant and administered in three doses over the course of 6 months. However, this vaccine requires invasive administration and requires multiple booster doses. To avoid these limitations, nanoparticle (NP)-based vaccines lent itself as efficient adjuvants and delivery systems for the development of new generation vaccines. The biodegradable synthetic polymeric NPs poly(lactide-co-glycolide) (PLGA) was used in this study to formulate PLGA NPs encapsulated with hepatitis B surface protein to evaluate immune response in human peripheral blood lymphocytes in vitro. Formulation of HBP (HBV surface protein)-encapsulated PLGA (HB-nanovaccine [HB-NV]) was conducted by using double emulsion solvent evaporation technique (water-oil-water), which resulted in 94% encapsulation efficiency and 24% protein loading capacity. The resulted HB-NV had typical characteristics of spherical shape at an average size of 71.08 nm with higher densities and high stability dispersion of negatively charged NPs as assessed by atomic force microscopy, scanning electron microscopy, ultraviolet absorption spectrophotometry, zeta potential, and Fourier-transform infrared. The immune response to HB-NV was measured in vitro in lymphocytes, showed significant increase in levels of IL-2 and IFN-γ, as well as in CD4⁺ and CD8⁺ T cell counts, with a dose-dependent effect, examined by enzyme-linked immunosorbent assay and flow cytometry, respectively.

Polymer-Based Nanosystems-A Versatile Delivery Approach

Polymer-based nanoparticles of tailored size, morphology, and surface properties have attracted increasing attention as carriers for drugs, biomolecules, and genes. By protecting the payload from degradation and maintaining sustained and controlled release of the drug, polymeric nanoparticles can reduce drug clearance, increase their cargo's stability and solubility, prolong its half-life, and ensure optimal concentration at the target site. The inherent immunomodulatory properties of specific polymer nanoparticles, coupled with their drug encapsulation ability, have raised particular interest in vaccine delivery. This paper aims to review current and emerging drug delivery applications of both branched and linear, natural, and synthetic polymer nanostructures, focusing on their role in vaccine development.

Demystifying particle-based oral vaccines

Introduction: The oral route of vaccination is pain- and needle-free and can induce systemic and mucosal immunity. However, gastrointestinal barriers and antigen degradation impose significant hurdles in the development of oral vaccines. Live attenuated viruses and bacteria can overcome these barriers but at the risk of introducing safety concerns. As an alternative, particles have been investigated for antigen protection and delivery, yet there are no FDA-approved oral vaccines based on particle-based delivery systems. Our objective was to discover underlying determinants that can explain the current inadequacies and identify paradigms that can be implemented in future for successful development of oral vaccines relying on particle-based delivery systems.Areas covered: We reviewed literature related to the use of particles for oral vaccination and placed special emphasis on formulation characteristics and administration schedules to gain an insight into how these parameters impact production of antigen-specific antibodies in systemic and mucosal compartments.Expert opinion: Despite the long history of vaccines, particle-based oral vaccination is a relative new field with the first study published in 1989. Substantial variability exists between different studies with respect to dosing schedules, number of doses, and the amount of vaccine per dose. Most studies have not used adjuvants in the formulations. Better standardization in vaccination parameters is required to improve comparison between experiments, and adjuvants should be used to enhance the systemic and mucosal immune responses and to reduce the number of doses, which will make oral vaccines more attractive.

Design of experiments (DoE) to develop and to optimize nanoparticles as drug delivery systems

Nanotechnology has been widely applied to develop drug delivery systems to improve therapeutic performance. The effectiveness of these systems is intrinsically related to their physicochemical properties, so their biological responses are highly susceptible to factors such as the type and quantity of each material that is employed in their synthesis and to the method that is used to produce them. In this context, quality-oriented manufacturing of nanoparticles has been an important strategy to understand and to optimize the factors involved in their production. For this purpose, Design of Experiment (DoE) tools have been applied to obtain enough knowledge about the process and hence achieve high-quality products. This review aims to set up the bases to implement DoE as a strategy to improve the manufacture of nanocarriers and to discuss the main factors involved in the production of the most common nanocarriers employed in the pharmaceutical field.

Nano-adjuvant based on silk fibroin for the delivery of recombinant hepatitis B surface antigen

Nanotechnology has a vital role in vaccine development. Nano-adjuvants, as robust delivery systems, could stimulate immune responses. Using nanoparticles (NPs) in vaccine formulations enhances the target delivery, immunogenicity, and stability of the antigens. Herein, silk fibroin nanoparticles (SFNPs) were used as a nano-adjuvant for delivering recombinant hepatitis B surface antigen (HBsAg). HBsAg was loaded physically and chemically on the surface of SFNPs. The HBsAg-loaded SFNPs had a spherical morphology. The in vitro release studies showed that HBsAg had a continuous and slow release from SFNPs during 56 days. During this time, ∼45.6% and 34.1% HBsAg was released from physical-SFNPs and chemical-SFNPs, respectively. HBsAg-loaded SFNPs were also stable for six months with slight changes in the size, surface charge, and morphology. The results of circular dichroism (CD) and fluorescence spectroscopy indicated that the released HBsAg preserved the native secondary and tertiary structures. The quantitative cellular uptake study also showed that physical-SFNPs were taken up more into J774A.1 macrophage cells than chemical-SFNPs. After 28 and 56 days post-injection, the immunogenicity studies showed that the specific total IgG, IgG1, and IgG2a levels against HBsAg were significantly higher in the physically loaded group than in the chemically loaded group and commercial hepatitis B vaccine. IgG2a levels were detected only in mice immunized with physical-SFNPs. However, the low levels of IL-4 and IFN-γ were produced in all vaccinated groups and differences in mean values were not significant compared with control groups. Results indicated an improvement in the levels of anti-HBsAg IgG in mice immunized with the physical-SFNPs group compared to other groups.

Rational application of nanoadjuvant for mucosal vaccine delivery system

The surface of the mucosa is the biggest path through which pathogens enter the human body. We need an understanding of mucosal immune systems to use vaccines that generate protective mucosal and systemic immunity to regulate the outbreak of various infectious diseases. The better impact of the mucosal vaccine over traditional injectable vaccines are that not only do they induce efficient immune reactions to the mucosa but they are also comfortable in physical aspect & psychological aspect. The material of the vaccine includes pathogens antigens and adjuvants, which enable vaccination to be effective. Vaccines are classified into different criteria, including the used vaccine material and method of administration. Vaccines have traditionally been injected through a needle. However, as most of the pathogens first infect the mucosal surfaces, and growing interest is expressed in establishing protective immunity from the mucosa, which is accomplished through mucosal paths through vaccinosis. To improve the existing vaccines further, innovative strategies derived from interdisciplinary scientific research will need to develop new vaccine production, storage, and delivery systems. A distinctive & vast research and development platform has been set up for the growth of the next generation of mucosal vaccinations. The latest science and technological advancement in the areas of molecular biology, bio and chemical engineering, genome and system biology has provided accumulated understanding of the inborn and acquired multi-dimensional immune system. This review summarizes recent developments in the use of mucosal vaccines and their associated nanoadjuvants for the control of infectious diseases.

Safe-by-Design of Glucan Nanoparticles: Size Matters When Assessing the Immunotoxicity

Glucan (from Alcaligenes faecalis) is a polymer composed of β-1,3-linked glucose residues, and it has been addressed in different medical fields, namely in nanotechnology, as a vaccine or a drug delivery system. However, due to their small size, nanomaterials may present new risks and uncertainties. Thus, this work aims to describe the production of glucan nanoparticles (NPs) with two different sizes, and to evaluate the influence of the NPs size on immunotoxicity. Results showed that, immediately after production, glucan NPs presented average sizes of 129.7 ± 2.5 and 355.4 ± 41.0 nm. Glucan NPs of 130 nm presented greater ability to decrease human peripheral blood mononuclear cells and macrophage viability and to induce reactive oxygen species production than glucan NPs of 355 nm. Both NP sizes caused hemolysis and induced a higher metabolic activity in lymphocytes, although the concentration required to observe such effect was lower for the 130 nm glucan NPs. Regarding pro-inflammatory cytokines, only the larger glucan NPs (355 nm) were able to induce the secretion of IL-6 and TNF-α, probably due to their recognition by dectin-1. This higher immunomodulatory effect of the larger NPs was also observed in its ability to stimulate the production of nitric oxide (NO) and IL-1β. On the contrary, a small amount of Glu 130 NPs inhibited NO production. In conclusion, on the safe-by-design of glucan NPs, the size of the particles should be an important critical quality attribute to guarantee the safety and effectiveness of the nanomedicine.

Synthesis and Statistical Optimization of Poly (Lactic-Co-Glycolic Acid) Nanoparticles Encapsulating GLP1 Analog Designed for Oral Delivery

Purpose

To design and stabilize Liraglutide loaded poly (lactic-co-glycolic acid) nanoparticles (PLGA NPs) proper for oral administration.

Methods

PLGA NPs were prepared by means of double emulsion solvent evaporation method and optimized by applying 7-factor 2-level Plackett-Burman screening design.

Results

Spherical shaped NPs with homogeneous distribution, 188.95 nm particle size and 51.81% encapsulation efficiency were obtained. Liraglutide was successfully entrapped in the NPs while maintaining its native amorphous nature, and its structural integrity as well.

Conclusion

Lira-PLGA NPs with the required Critical Quality Attributes (CQAs) were successfully designed by implementing a 7-factor 8-run Plackett Burman design into the extended Quality by Design (QbD) model, to elucidate the effect of formulation and process variables on the particle size, size-distribution, encapsulation efficiency and surface charge. As the developed nanoparticles maintained the native structure of the active pharmaceutical ingredient (API), they are promising compositions for the further development for the oral delivery of Lira.