Preparation and characterization of carboxymethyl chitosan sulfate/oxidized konjac glucomannan hydrogels

A carboxymethyl-resistant starch/polyacrylic acid semi-IPN hydrogel with excellent adhesive and antibacterial properties for peri-implantitis prevention

Hydrogels possess inherent characteristics that render them promising for the prevention of peri-implantitis. Nonetheless, hydrogels with singular network structures are incapable of concurrently achieving the desired adhesion and mechanical properties. In this work, a carboxymethyl resistant starch/polyacrylic acid semi-interpenetrating (CMRS/PAA semi-IPN) hydrogel was successfully prepared in one step. Its morphology, structure, mechanical properties, and adhesion properties were systematically assessed, which revealed a homogeneously porous structure with a commendable mechanical strength of 67.317 kPa and an adhesion strength of 63 kPa. Ciprofloxacin (Cip) was loaded in the CMRS/PAA hydrogel via in situ compounding. The in vitro kinetic study of drug release shows that the slow drug release efficiency exceeds 90 % in the weakly acidic microenvironment at the infection site after 72 h, indicating enhanced antimicrobial properties. The Cip-loaded hydrogel also exhibits a remarkable bacterial inhibition rate exceeding 99 % against the pathogenic bacterium P. gingivalis and good cytocompatibility and hemocompatibility in vitro. In summary, the current work explored a novel solution and direction for the development of anti-infective medical materials applicable to dental implants.

Highly effective removal of basic fuchsin dye using carboxymethyl konjac glucomannan grafted acrylic acid-acrylamide/montmorillonite composite hydrogel

This study developed a nanocomposite hydrogel, CAM4-MMT, for efficiently removing basic fuchsin dye from water. The hydrogel was prepared by grafting a copolymer of acrylic acid (AA) and acrylamide (AM) onto carboxymethyl konjac glucomannan (CMKGM), and doped with montmorillonite (MMT), exhibited excellent thermal stability, a porous inner structure, large specific surface area (1.407 m2/g), and high swelling capacity (107.3 g/g). The hydrogel achieved a maximum adsorption capacity of 694.1 mg/g and a removal rate of 99.5 %. The Langmuir isotherm and pseudo-second-order kinetic model best described the adsorption process. Regeneration and reuse tests confirmed that the hydrogel has excellent recyclability. In conclusion, the CAM4-MMT composite hydrogel efficiently removed basic fuchsin from water solutions, offering a new scheme for eliminating basic fuchsin using natural polysaccharides with promising applications.

Konjac glucomannan: A comprehensive review of its extraction, health benefits, and pharmaceutical applications

Konjac glucomannan (KG) is a dietary fiber hydrocolloid derived from Amorphophallus konjac tubers and is widely utilized as a food additive and dietary supplement. As a health-conscious choice, purified KG, along with konjac flour and KG-infused diets, have gained widespread acceptance in Asian and European markets. An overview of the chemical composition and structure of KG is given in this review, along with thorough explanations of the processes used in its extraction, production, and purification. KG has been shown to promote health by reducing glucose, cholesterol, triglyceride levels, and blood pressure, thereby offering significant weight loss advantages. Furthermore, this review delves into the extensive health benefits and pharmaceutical applications of KG and its derivatives, emphasizing its prebiotic, anti-inflammatory, and antitumor activities. This study highlights how these natural polysaccharides can positively influence health, underscoring their potential in various biomedical applications.

Fabrication and hemostasis evaluation of a carboxymethyl chitosan/sodium alginate/Resina Draconis composite sponge

Hemostasis is the first step of emergency medical treatment. It is particularly important to develop rapid-acting and efficacious hemostatic materials. Carboxymethyl chitosan (CMCS), sodium alginate (SA) and Resina Draconis (RD) were composited uniformly by polyelectrolyte blending. Their composite sponges (CMCS/SA/RD) were prepared by freeze-induced phase separation. CMCS/SA/RD sponges were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy, and their blood absorption and hemolysis ratio were analyzed. The hemostatic effect of the composite sponges was evaluated by coagulation in vitro and in vivo. The composite sponges had a porous network structure. The water absorption ratio was >8000 %, and hemolysis ratio was <5 %. CMCS/SA/RD-II and CMCS/SA/RD-III composite sponges shortened the coagulation time in vitro by 11.33 s and 9.66 s, the hepatic hemostasis time by 13.8 % and 23.3 %, and the hemostasis time after mouse-tail amputation by 28.9 % and 23.9 %, respectively. A preliminary study on its coagulation mechanism showed that CMCS/SA/RD had significant effects on erythrocyte adsorption, platelet adhesion, and shortening of the activated partial thromboplastin time.

Piezoelectric Behaviour in Biodegradable Carrageenan and Iron (III) Oxide Based Sensor

This paper is dedicated to the research of phenomena noticed during tests of biodegradable carrageenan-based force and pressure sensors. Peculiar voltage characteristics were noticed during the impact tests. Therefore, the sensors' responses to impact were researched more thoroughly, defining time-dependent sensor output signals from calibrated energy impact. The research was performed using experimental methods when a free-falling steel ball impacted the sensor material to create relatively definable impact energy. The sensor's output signal, which is analogue voltage, was registered using an oscilloscope and transmitted to the PC for further analysis. The obtained results showed a very interesting outcome, where the sensor, which was intended to be piezoresistive, demonstrated a combination of behaviour typical for galvanic cells and piezoelectric material. It provides a stable DC output that is sensitive to the applied statical pressure, and in case of a sudden impact, like a hit, it demonstrates piezoelectric behaviour with some particular effects, which are described in the paper as proton transfer in the sensor-sensitive material. Such phenomena and sensor design are a matter of further development and research.

Sulfated polysaccharide as biomimetic biopolymers for tissue engineering scaffolds fabrication: Challenges and opportunities

Sulfated polysaccharides play important roles in tissue engineering applications because of their high growth factor preservation ability and their native-like biological features. There are different sulfated polysaccharides based on different repeating units in the carbohydrate backbone, the position of the sulfate group, and the sulfation degree of the polysaccharide. These led to various sulfated polymers with different negative charge densities and resultant structure-property relationships. Since numerous reports are presented related to sulfated polysaccharide applications in tissue engineering, it is crucial to review the role of effective physicochemical and biological parameters in their usage; as well as their structure-property relationships. Within this review, we focused on the effect of naturally occurring and synthetic sulfated polysaccharides in tissue engineering applications reported in the last years, highlighting the challenges of the scaffold fabrication process, the position, and the degree of sulfate on biomedical activity. Additionally, we discussed their use in numerous in vitro and in vivo model systems.

Natural self-healing injectable hydrogels loaded with exosomes and berberine for infected wound healing

Complete and rapid healing of infected skin wounds remains a challenge in current clinical treatment. In this study, we prepared a self-healing injectable CK hydrogel by crosslinking two natural polysaccharides, carboxymethyl chitosan and oxidized konjac glucomannan, based on the Schiff base bond. To enhance the biological function of the hydrogel, we multi-functionalized hydrogen by loading it with berberine (BBR) and stem cell-derived exosomes (Exo), forming a composite hydrogel, CK@BBR&Exo, which could be injected directly into the wound through a needle and adhered to the wound. Furthermore, the self-healing properties of CK@BBR&Exo increased its usefulness and service life. Additionally, the drug-loaded CK@BBR&Exo hydrogel was versatile, inhibiting bacterial growth, regulating the inflammatory response, and promoting neovascularization in infected skin wounds, thus achieving the rapid healing of infected skin wounds. These results suggest that the CK@BBR&Exo-injectable self-healing hydrogel is an ideal dressing for treating infected skin wounds.

Hybrid Membranes of the Ureasil-Polyether Containing Glucose for Future Application in Bone Regeneration

The application of mesenchymal stem cells (MSC) in bone tissue regeneration can have unpredictable results due to the low survival of cells in the process since the lack of oxygen and nutrients promotes metabolic stress. Therefore, in this work, polymeric membranes formed by organic-inorganic hybrid materials called ureasil-polyether for modified glucose release were developed in order to overcome the problems posed by a of lack of this nutrient. Thus, membranes formed by polymeric blend of polypropylene oxide (PPO4000) and polyethylene oxide (PEO500) with 6% glucose incorporation were developed. Physical-chemical characterization techniques were performed, as well as tests that evaluated thermal properties, bioactivity, swelling, and release in SBF solution. The results of the swelling test showed an increase in membrane mass correlated with an increase in the concentration of ureasil-PEO500 in the polymeric blends. The membranes showed adequate resistance when subjected to the application of a high compression force (15 N). X-ray diffraction (XRD) evidenced peaks corresponding to orthorhombic crystalline organization, but the absence of glucose-related peaks showed characteristics of the amorphous regions of hybrid materials, likely due to solubilization. Thermogravimetry (TG) and differential scanning calorimetry (DSC) analyses showed that the thermal events attributed to glucose and hybrid materials were similar to that seen in the literature, however when glucose was incorporated into the PEO500, an increase in rigidity occurs. In PPO400, and in the blends of both materials, there was a slight decrease in Tg values. The smaller contact angle for the ureasil-PEO500 membrane revealed the more hydrophilic character of the material compared to other membranes. The membranes showed bioactivity and hemocompatibility in vitro. The in vitro release test revealed that it is possible to control the release rate of glucose and the kinetic analysis revealed a release mechanism characteristic of anomalous transport kinetics. Thus, we can conclude that ureasil-polyether membranes have great potential to be used as a glucose release system, and their future application has the potential to optimize the bone regeneration process.

Chitosan Hydrogel as Tissue Engineering Scaffolds for Vascular Regeneration Applications

Chitosan hydrogels have a wide range of applications in tissue engineering scaffolds, mainly due to the advantages of their chemical and physical properties. This review focuses on the application of chitosan hydrogels in tissue engineering scaffolds for vascular regeneration. We have mainly introduced these following aspects: advantages and progress of chitosan hydrogels in vascular regeneration hydrogels and the modification of chitosan hydrogels to improve the application in vascular regeneration. Finally, this paper discusses the prospects of chitosan hydrogels for vascular regeneration.

Kaolin-loaded carboxymethyl chitosan/sodium alginate composite sponges for rapid hemostasis

There are several factors that contribute to the mortality of people who suffer from unmanageable bleeding. Therefore, the development of rapid hemostatic materials is necessary. Herein, novel rapid hemostatic composite sponges were developed by incorporation of kaolin (K) into carboxymethyl chitosan (CMCS)/sodium alginate (SA) via a combination of methods that includes ionic crosslinking, polyelectrolyte action, and freeze-drying. The CMCS/SA-K composite sponges were cross-linked with calcium ions provided by a sustained-release system consisting of D-gluconolactone (GDL) and Ca-EDTA, and the hemostatic ability of the sponges was enhanced by loading the inorganic hemostatic agent-kaolin (K). It was demonstrated that the CMCS/SA-K composite sponges had a good porous structure and water absorption properties, excellent mechanical properties, outstanding biodegradability, and biocompatibility. Simultaneously, they exhibited rapid hemostatic properties, both in vitro and in vivo. Significantly, the hemostatic time of the CMCS/SA-K₆₀ sponge was improved by 82.76 %, 191.82 %, and 153.05 %, compared with those of commercially available gelatin sponges in the rat tail amputation, femoral vein, and liver injury hemorrhage models respectively, indicating that its hemostatic ability was superior to that of commercially available hemostatic materials. Therefore, CMCS/SA-K composite sponges show great promise for rapid hemostasis.

Exploring the potential of Rhizopus oryzae AUMC14899 as a novel endophytic fungus for the production of L-tyrosine and its biomedical applications

BACKGROUND

A significant threat to the public's health is the rise in antimicrobial resistance among numerous nosocomial bacterial infections. This may be a detriment to present initiatives to enhance the health of immune-compromised patients. Consequently, attention has been devoted to exploring new bioactive compounds in the field of drug discovery from endophytes. Therefore, this study is the first on the production of L-tyrosine (LT) as a promising bio-therapeutic agent from endophytic fungi.

RESULTS

A new endophytic fungal isolate has been identified for the first time as Rhizopus oryzae AUMC14899 from Opuntia ficus-indica (L.) and submitted to GenBank under the accession number MZ025968. Separation of amino acids in the crude extract of this fungal isolate was carried out, giving a higher content of LT, which is then characterized and purified. LT exhibited strong antibacterial and anti-biofilm activities against multidrug-resistant Gram-negative and Gram-positive bacteria. The recorded minimum inhibitory concentration (MIC) values ranged from 6 to 20 µg/ml. In addition, LT caused a strong reduction in biofilm formation and disrupted the preformed biofilm. Moreover, results indicated that LT supported cell viability, evidencing hemocompatibility and no cytotoxicity.

CONCLUSION

Our findings suggest that LT has potential as a therapeutic agent due to its potential antibacterial, anti-biofilm, hemocompatibility, and lack of cytotoxic activities, which may also increase the range of therapy options for skin burn infections, leading to the development of a novel fungal-based drug.

Facile preparation of antibacterial hydrogel with multi-functions based on carboxymethyl chitosan and oligomeric procyanidin

Hydrogel-based antibacterial materials with multi-functions are of great significance for healthcare. Herein, a facile and one-step method was developed to fabricate an injectable hydrogel (named CMCS/OPC hydrogel) based on carboxymethyl chitosan (CMCS) and oligomeric procyanidin (OPC). In this hydrogel system, OPC serves as the dynamic crosslinker to bridge CMCS macromolecules mainly through dynamical hydrogen bonds, which endows this hydrogel with excellent injectable, self-healing, and adhesive abilities. In addition, due to the inherent antibacterial properties of CMCS and OPC, this hydrogel shows excellent antibacterial activity. Therefore, the well-designed CMCS/OPC hydrogel has great prospects as an antibacterial material in the biomedical field.

A novel hydrogel based on Bletilla striata polysaccharide for rapid hemostasis: Synthesis, characterization and evaluation

The purpose of this study is to develop a new polysaccharide-based hydrogel. The Box-Behnken design was used to optimize the optimal synthesis conditions of the hydrogel, with the swelling parameters as indicators. The findings of rheologic tests confirm that free radical polymerization and the introduction of linear polymers improved the mechanical strength of the hydrogel. Combined with the characterization results, the gel mechanism of BSP-g-PAA/PVA DN hydrogel was proposed. The intermolecular association and entanglement increase, which effectively dissipates energy, thereby enhancing the mechanical properties of the hydrogel. In vitro blood compatibility experiments show that DN hydrogel has a low hemolysis rate and a good coagulation effect. The material is non-cytotoxic to L929 cells. The hepatic haemorrhage and mouse-tail amputation models of rats and mice were used to further evaluate the in vivo wound sealing and hemostatic properties of the hydrogel. The blood loss and hemostatic time were significantly lower than those of the control group, indicating that the hydrogel has excellent hemostatic effects. Therefore, the obtained BSP-g-PAA/PVA DN network hydrogel has good comprehensive properties and is expected to be used as a hemostatic material or a precursor of a drug carrier and a tissue engineering scaffold.

3D bioprinting of an electroactive and self-healing polysaccharide hydrogels

Polysaccharide hydrogels including alginate, agarose, hyaluronic acid and chitosan have been widely used as scaffolds in 3D bio-printing field. Konjac glucomannan (KGM) exhibits excellent properties of water solubility, biocompatibility and biodegradability. Herein composite hydrogels were prepared via schiff-base reaction between the aldehyde group of oxidized konjac glucomannan (OKGM) and the amino group of branched polyethyleneimine (PEI). The OKGM/PEI composite hydrogel displayed self-healing ability and pH sensitivity and showed shear thinning capability, which is suitable for 3D bio-printing technology. Furthermore, the OKGM/PEI electroactive composite hydrogel was obtained by adding carbon nanotubes (CNTs). Then the rheological behavior and morphology of OKGM/PEI electroactive hydrogels were thoroughly characterized. The conductivities of OKGM/PEI electroactive composite hydrogels increased with increasing the content of carbon nanotubes. The rheological behavior and 3D bio-printability of OKGM/PEI electroactive hydrogels were also tested. It was found that carbon nanotubes can also improve the bio-printability of OKGM/PEI electroactive hydrogels. Thus, the OKGM/PEI electroactive hydrogels could be employed as scaffolds for muscle and cardiac nerve tissue regeneration. This article is protected by copyright. All rights reserved.

Recent advances in composite hydrogels prepared solely from polysaccharides

The proliferating demand for sustainable, biodegradable, and biologically safe materials has triggered the development of polysaccharide-based hydrogels. The translation of research on single polysaccharide-based hydrogels into their desired clinical or industrial application is minimal. This is attributable to their lack of mechanical strength, inadequate stability, and constrained the possibility of their modulation to obtain the desired property. Polysaccharide-based composite hydrogels (PCHs) have proven their mantle to counteract this issue while expanding the horizons for their applications. PCHs can be fabricated by physical and/or chemical interlinking techniques, which entails the association of macromolecular chain linkages. The resulting composites can impart remarkably higher stability and elevate the suitability and efficiency of the system. Owing to these advantages, the research on PCHs has been gaining momentum. They are emerging as a lucrative alternative for the conventional molecules used for the fabrication of such materials. The review would initially focus on providing a detailed outlook for the various physical/chemical techniques involved in the preparation of PCHs. Subsequently, the characterization techniques used to understand the structural and chemical behavior of PCHs would be discussed. The article would also elaborate on the various fields of application and the possible areas for future research of PCHs.

Preparation of nano-hydroxyapatite/chitosan/tilapia skin peptides hydrogels and its burn wound treatment

There is an urgent need for wound dressings to treat partial-thickness burns. Hydrogels are a promising material that can maintain hydration to promote necrotic tissue removal. Tilapia peptides (TP) and hydroxyapatite (HA) were incorporated into chitosan system to prepare new types of hydrogels. The hydrogels were cross-linking by tannin (TA), which were developed to promote rapid wound healing in a New Zealand rabbit partial-thickness burn model. Nanohydroxyapatite (NHA) was synthesized by coprecipitation method, which made hydrogels have a highly porous structure comprised of interconnected pores, excellent water absorption and low hemolysis. Besides, the hydrogels showed excellent antimicrobial activities against both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), as well as the cytocompatibility on endothelial cells. Moreover, the hydrogels promoted epithelial and dermal regeneration, reduce the expression of TNF-α and IL-6 and promote the skin regeneration by enhancing expression of collagen, STAT3, and VEGF.

Synthesis and antimicrobial activities of chitosan/polypropylene carbonate-based nanoparticles

Antibiotic resistance is an emerging threat to public health. The development of a new generation of antimicrobial compounds is therefore currently required. Here we report a novel antimicrobial polymer of chitosan/polypropylene carbonate nanoparticles (CS/PPC NPs). These were designed and synthesized from readily available chitosan and a reactive oligomer polypropylene carbonate (PPC)-derived epoxy intermediate. By employing a simple and efficient functionalized strategy, a series of micelle-like chitosan-graft-polypropylene carbonate (CS-g-PPC) polymers and chitosan-polypropylene carbonate (CS-PPC) microgels were prepared by reacting mono-/bis-epoxy capped PPC with chitosan. The chemical structure, particle size, and surface charge of the newly synthesized polymers were characterized by infrared (IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, dynamic light scattering (DLS), and zeta potential measurements. The antimicrobial activities of these nanoparticles were determined in both Gram-positive bacteria (S. aureus) and Gram-negative bacteria (E. coli). Minimum inhibitory concentration (MIC), the nanoparticle concentration needed to completely inhibit the bacterial growth, was found at 128 μg mL-1 to 1024 μg mL-1, strongly depending both on the nature of the epoxy-imine network formed from the functional groups (mono- or bis-capped epoxy groups reacting with amine groups) and the feed ratio of the functional groups (-epoxy/-NH2) between the functionalized PPC and chitosan. No hemolysis was observed at concentrations well in excess of the effective bacteria-inhibiting concentrations. These findings provide a novel strategy to fabricate a new type of nanoantibiotic for antimicrobial applications.

Catechol functionalized chitosan/active peptide microsphere hydrogel for skin wound healing

Chitosan-based thermosensitive hydrogels have been widely used in drug delivery and tissue engineering, but their poor bioactivity has limited their further applications. Integral active oyster peptide microspheres (OPM) with an average particle diameter of 3.9 μm were prepared with high encapsulation efficiency (72.8%) and loading capacity (11.9%), exhibiting desirable sustained release effects. Using catechol functionalized chitosan (CS-C) as the polymeric matrix, OPM as the filler, and β-sodium glycerophosphate (β-GP) as a thermal sensitizer, the thermosensitive hydrogel CS-C/OPM/β-GP was prepared. Besides, the application of the hydrogel on wound healing was studied, and its biosafety was evaluated. The results of cell migration in vitro showed that the cell migration rate of CS-C/OPM/β-GP reached 97.47 ± 5.41% within 48 h, indicating that the hydrogel accelerated the migration of L929 cells. As demonstrated in the mouse skin wound experiment, CS-C/OPM/β-GP hydrogel not only inhibited the aggregation of diversified inflammatory cells and accelerated the generation of collagen fibers and new blood vessels of the wound, but also enhanced the synthesis of total protein (TP) in granulation tissue, and up-regulated the expression of Ki-67 and VEGF in the injury, thereby achieving fast wound healing. Safety evaluation results showed that CS-C/OPM/β-GP hydrogel was not cytotoxic to L929 cells, and the hemolysis ratio was less than 5% within 1 mg/mL. In conclusion, CS-C/OPM/β-GP hydrogel is expected as a promising medical dressing for wound healing.

Impact of heating and drying temperatures on the properties of konjac glucomannan/curdlan blend films

The impact of preparation conditions including heating temperature (from 60 °C to 90 °C) and drying temperatures (from 25 °C to 90 °C) on the properties of pure curdlan film and konjac glucomannan (KGM) and curdlan blend films were analyzed. Microstructure analysis indicated the KGM addition could significantly improve the relatively poor film-forming property of curdlan. FTIR and X-ray analysis showed that at high heating temperature 90 °C, molecular interaction might be enhanced in the films due to the stretched structure of curdlan and dissociation of curdlan bundles or triple-helix structure. This was supported by the changes in the mechanical property, surface hydrophobicity, moisture barrier, and moisture tolerance property. The impacts of drying temperature were some different for the curdlan film and KGM/curdlan blend film, and were explained from the molecular hydrophilicity-hydrophobicity, compactness of the films, curdlan conformation, and molecular interaction. This work guided biodegradable film production especially with curdlan added.

Preparation and Properties of Carboxymethyl Chitosan/Alginate/Tranexamic Acid Composite Films

In this study, the porous composite films of carboxymethyl chitosan/alginate/tranexamic acid were fabricated, with calcium chloride as the crosslinking agent and glycerin as a plasticizer. The composite films were characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. The properties of the composite films, including water absorption, air permeability, and cumulative release rate, were tested. In addition, their hemostatic performance was evaluated. The results showed that the appearance of the films with good adhesion was smooth and porous. FTIR showed that chemical crosslinking between carboxymethyl chitosan and sodium alginate was successful. The excellent cumulative release of tranexamic acid in the composite films (60–80%) gives the films a significant procoagulant effect. This has good prospects for the development of medical hemostasis materials.

Pharmaceutical Potential of a Novel Chitosan Derivative Schiff Base with Special Reference to Antibacterial, Anti-Biofilm, Antioxidant, Anti-Inflammatory, Hemocompatibility and Cytotoxic Activities

PURPOSE

Chitosan and its derivatives possess several unique properties relevant in the field of pharmaceutics and medicinal chemistry. This study aimed to evaluate the pharmaceutical performance of an innovative chitosan derivative, methyl acrylate chitosan bearing p-nitrobenzaldehyde (MA*CS*pNBA) Schiff base.

METHODS

The antibacterial activity of MA*CS*pNBA was tested against multi-drug resistant (MDR) Gram-negative and Gram-positive bacteria using agar-well diffusion method. Anti-biofilm formation was analyzed using a microtitre plate. Antioxidant assays were performed to assess the scavenging activity of MA*CS*pNBA using DPPH, hydrogen peroxide, superoxide together with its reducing power activity. Anti-inflammatory activity was evaluated by albumin denaturation, membrane stabilization, and proteinase inhibition methods. MA*CS*pNBA was tested for its hemolytic efficiency on human erythrocytes. Cytotoxicity of MA*CS*pNBA was evaluated by MTT assay.

RESULTS

MA*CS*pNBA showed a significant performance as an antibacterial candidate against MDR bacteria, anti-biofilm, antioxidant and anti-inflammatory biomaterial, evidencing hemocompatibility and no cytotoxicity. It exhibited a significant negative correlation with biofilm formation by the MDR-PA-09 strain. Biological activities were found to be significantly concentration-dependent.

CONCLUSIONS

the newly chitosan derivative MA*CS*pNBA showed to be promising for pharmaceutical applications, expanding the treatment ways toward skin burn infections since it allied excellent antibacterial, anti-biofilm, antioxidant, anti-inflammatory, hemocompatibility and absence of cytotoxic activities.