Design of epoxy-functionalized Fe3O4@MCM-41 core-shell nanoparticles for enzyme immobilization

Design of silver-zinc-nickel spinel-ferrite mesoporous silica as a powerful and simply separable adsorbent for some textile dye removal

Silver-zinc-nickel spinel ferrite was prepared by the co-precipitation procedure with the precise composition Ag0.1Zn0.4Ni0.5Fe2O4 for bolstering pollutant removal effectiveness while upholding magnetic properties and then coated with a mesoporous silica layer. The surface characteristics and composition of Ag0.1Zn0.4Ni0.5Fe2O4@mSiO2 were confirmed using EDX, FT-IR, VSM, XRD, TEM, SEM, and BET methods. The surface modification of Ag-Zn-Ni ferrite with a silica layer improves the texture properties, where the specific surface area and average pore size of the spinel ferrite rose to 180 m2/g and 3.15 nm, respectively. The prepared spinel ferrite@mSiO2 has been utilized as an efficient adsorbent for eliminating methyl green (MG) and indigo carmine (IC) as models of cationic and anionic dyes from wastewater, respectively. Studying pH, Pzc, adsorbent dosage, dye concentration, and temperature showed that efficient removal of MG was carried out in alkaline media (pH = 12), while the acid medium (pH = 2) was effective for IC removal. Langmuir isotherm and pseudo-second-order kinetics were found to be good fits for the adsorption data. Both dyes were adsorbed in a spontaneous, endothermic process. A possible mechanism for dye removal has been proposed. The adsorbent was effectively recovered and reused.

A newly synthesized magnetic nanoparticle coated with glycidyl methacrylate monomer and 1,2,4-Triazole: Immobilization of α-Amylase from Bacillus licheniformis for more reuse, stability, and activity in the presence of H2O2

α-Amylase is a secretory enzyme commonly found in nature. The α-Amylase enzyme catalyzes the hydrolysis of α-D-(1,4)-glucosidic bonds in starch, glycogen, and polysaccharides. The chemical characterization of the composite carrier and the immobilized enzyme was performed, and the accuracy of the immobilization was confirmed by FTIR, SEM, and EDS analyses. The X-ray diffraction (XRD) analysis indicates that the magnetic nanoparticle retained its magnetic properties following the modification process. Based on the Thermogravimetric Analysis (TGA) outcomes, it was evident that the structural integrity of the FPT nanocomposite remained unchanged at 200°C. The optimal pH was determined to be 5.5, and no alteration was observed following the immobilization process. Purified α-amylases usually lose their activity rapidly above 50°C. In this study, Bacillus licheniformis α-Amylase enzyme was covalently immobilized on the newly synthesized magnetic composite carrier having more azole functional group. For novelty-designed immobilized enzymes, while there is no change in the pH and optimum operating temperature of the enzyme with immobilization, two essential advantages are provided to reduce enzyme costs: the storage stability and reusability are increased. Furthermore, our immobilization technique enhanced enzyme stability when comparing our immobilized enzyme with the reference enzyme in industrial applications. The activity of the immobilized enzyme was higher in presence of 1-3% H2O2.

Polyamidoamine Dendrimers Functionalized with ZnO-Chitosan Nanoparticles as an Efficient Surface for L-asparaginase Immobilization

In this study, the third-generation polyamidoamine dendrimer was functionalized with a 5-amino-1H-tetrazole heterocycle to load the synthesis enzyme and its surface groups. Then, chitosan was attached to the dendrimer by a suitable linker, and finally, zinc oxide nanoparticles were inserted into dendrimer cavities to increase loading. FTIR, FESEM, TEM, and DLS analysis showed that this new dendrimer has specific branches, and ZnO nanoparticles were spread between the branches and connected with the branches and chitosan biopolymer. Also proved the presence of stabilized L-asparaginase enzyme and ZnO nanoparticles in the designed system. Furthermore, the extent of L-asparaginase enzyme loading and release was investigated in the laboratory with a dialysis bag. Examining the toxicity of the new third-generation polyamidoamine (PAMAM) dendrimeric nanocarrier based on chitosan-zinc oxide biopolymer (PAMAM-G3@ZnO-Cs nanocarrier) on the Jurkat cell line (human acute lymphoblastic leukemia) at pH 7.4 showed that this nanocarrier effectively encapsulates the drug L-asparaginase and slowly releases it and also preventing the growth of cancer cells. The activity of the loaded enzyme in the nanocarrier and the free enzyme was calculated. During the investigations, it was found that the enzyme attached to the nanocarrier is more stable than the free enzyme at optimal pH and temperature and at high temperatures, acidic and basic pHs. Vmax and Km values were lower for loaded enzymes. The synthesized PAMAM-G3@ZnO-Cs nanocarrier can be a promising candidate in the pharmaceutical industry and medical science for cancer treatment due to its biocompatibility, non-toxicity, stability, and slow release of L-asparaginase.

Immobilization of laccase on magnetic mesoporous silica as a recoverable biocatalyst for the efficient degradation of benzo[a]pyrene

Laccase is an efficient green biocatalyst, widely used for the degradation of various organic pollutants. However, free laccase is unstable and difficult to recover, which limits its practical application. In this study, a multilayer core-shell magnetic mesoporous silica (Fe3O4@d-SiO2@p-SiO2) microsphere with high specific surface area (275 m2 g-1) was fabricated for immobilization of laccase. The unique structure of Fe3O4@d-SiO2@p-SiO2 enabled the successful immobilization of laccase. Under the optimal immobilization conditions of laccase concentration of 1.5 mg mL-1, immobilization time of 6 h, immobilization pH of 6, the loading capacity of laccase was up to 567 mg g-1. Compared with free laccase, immobilized laccase exhibited remarkable pH stability, thermal stability and storage stability. Moreover, the immobilized laccase was easy to achieve magnetic recovery and possessed excellent reusability, with its activity remaining 58.2% after 10 consecutive reuses. More importantly, immobilized laccase had good degradation performance for benzo[a]pyrene (BaP), which can achieve rapid and efficient degradation of low concentration BaP over a wide range of pH and temperature. The removal efficiency of BaP was up to 99.0% within 1 h, and still exceeded 35.0% after 5 cycles. The removal of BaP by immobilized laccase was achieved through both adsorption and degradation. The degradation products and possible degradation pathways were determined by GC-MS analysis. This study indicated that Fe3O4@d-SiO2@p-SiO2 could effectively enhance the stability and biocatalytic activity of laccase, which is expected to provide a new clean biotechnology for the remediation of BaP contaminated sites.

Immobilization of lipase in chitosan-mesoporous silica material and pore size adjustment

Mesoporous silica MCM-41 was modified by carboxyl groups and assembled with chitosan to produce a novel nanocarrier for the immobilization of lipase. The prepared composite was grafted with silane coupling agent KH560 to decrease the pore size of the mesoporous material and prevent the loss of shed lipase molecules. According to the characterization of the material before and after modification and determination of related parameters, the residual activity of the lipase fixed in the CTS-MCM-41 carrier was 85 % after seven repeated use cycles. The grafting rate of MCM-41 and shrinkage effect were maximized when the concentration of KH560 was 5.0 %, and the modification was performed at 4 h at 70 °C. Using glutaraldehyde as the crosslinking agent, the optimal conditions for enzyme immobilization involved a mass ratio of the carrier to enzyme of 4:1, glutaraldehyde solution volume of 3 %, reaction time of 3 h, and reaction temperature of 45 °C. Overall, the proposed innovative carrier for the fixation of lipase is stable and can physically control the free enzyme in the pore. Moreover, the efficient miniature lipase reactor can promote large-scale industrial production.

Detection of bacterial contaminants via frequency manipulation of amino-groups functionalized Fe3O4nanoparticles based resonant sensor

Bacterial infections have a large impact on public health. Through this study, we report on the development of complementary split-ring resonators (CSRR) supplemented by functionalized nanoparticles to detect bacteria in the aqueous medium. Iron oxide (Fe₃O₄) nanoparticles were functionalized with amino groups using (3-aminopropyl) triethoxysilane (APTES) to form (APTES@Fe₃O₄) nanoparticles, which have a specific affinity towards the bacterial species. This affinity was evaluated using theEscherichia coli (E. coli)andStaphylococcus aureus (S. aureus)bacterial species. The resonant sensor was tuned at 430 MHz and the CSRR sensor bed was further activated using APTES@Fe₃O₄nanoparticles. Bacterial detection was studied over a range of concentrations from 2.66 x 10⁹cells to 2.66 x 10⁸cells. The sensor actively responded to small changes in bacterial concentration, showing an overall shift in resonance frequency of ~ 44 MHz (~ 40 MHz / cell count) forE. coliand ~ 55 MHz (50.43 MHz / cell count) forS. aureus. Dextran sulphate and Chitosan were used as the references. The magnetic character of the conjugated system exhibited strong interaction of the bacterial species with APTES@Fe₃O₄, justifying the high selectivity towards these species. This demonstrates the feasibility of a sensitive, fast, portable device, against the traditionally used time-consuming bio-assays.

A systematic review of recent trends in research on therapeutically significant L-asparaginase and acute lymphoblastic leukemia

L-asparaginases are mostly obtained from bacterial sources for their application in the therapy and food industry. Bacterial L-asparaginases are employed in the treatment of Acute Lymphoblastic Leukemia (ALL) and its subtypes, a type of blood and bone marrow cancer that results in the overproduction of immature blood cells. It also plays a role in the food industry in reducing the acrylamide formed during baking, roasting, and frying starchy foods. This importance of the enzyme makes it to be of constant interest to the researchers to isolate novel sources. Presently L-asparaginases from E. coli native and PEGylated form, Dickeya chrysanthemi (Erwinia chrysanthemi) are in the treatment regime. In therapy, the intrinsic glutaminase activity of the enzyme is a major drawback as the patients in treatment experience side effects like fever, skin rashes, anaphylaxis, pancreatitis, steatosis in the liver, and many complications. Its significance in the food industry in mitigating acrylamide is also a major reason. Acrylamide, a potent carcinogen was formed when treating starchy foods at higher temperatures. Acrylamide content in food was analyzed and pre-treatment was considered a valuable option. Immobilization of the enzyme is an advancing and promising technique in the effective delivery of the enzyme than in free form. The concept of machine learning by employing the Artificial Network and Genetic Algorithm has paved the way to optimize the production of L-asparaginase from its sources. Gene-editing tools are gaining momentum in the study of several diseases and this review focuses on the CRISPR-Cas9 gene-editing tool in ALL.

Nitrite removal by Acinetobacter sp.TX: a candidate of curbing N2O emission

The nitrite removal pathway in Acinetobacter sp. TX5 was explored through the key gene identification and the corresponding enzyme purification, after which the capability to reduce nitrite by immobilized beads was investigated in a fixed-bed reactor. Results revealed that a nosZ gene encoding nitrous oxide reductase (N₂OR) exists in TX5 cells, and a N₂OR responsible for the reduction of N₂O to N₂ was purified successfully with a molecular weight of 70.05 kDa, a purification fold of 16.30 and a recovery rate of 5.17%. For TX5 immobilization, the optimal values of polyvinyl alcohol (PVA), spent mushroom substrate (SMS) and Aci (TX5) obtained by response surface methodology (RSM) were 6.32%, 2.92% and 4.57%, respectively. In a fixed-bed reactor packed with immobilized TX5, the removal efficiency (RE) achieved 90% (at 50 h) for NO2--N and 85% (at 96 h) for total nitrogen (TN). On the basis of these results, a nitrite removal pathway in TX5 was proposed. Overall, Acinetobacter sp. TX5 might be a promising candidate for nitrite removal with an ability to suppress N₂O accumulation.

Emerging 3D Printing Strategies for Enzyme Immobilization: Materials, Methods, and Applications

As the strategies of enzyme immobilization possess attractive advantages that contribute to realizing recovery or reuse of enzymes and improving their stability, they have become one of the most desirable techniques in industrial catalysis, biosensing, and biomedicine. Among them, 3D printing is the emerging and most potential enzyme immobilization strategy. The main advantages of 3D printing strategies for enzyme immobilization are that they can directly produce complex channel structures at low cost, and the printed scaffolds with immobilized enzymes can be completely modified just by changing the original design graphics. In this review, a comprehensive set of developments in the fields of 3D printing techniques, materials, and strategies for enzyme immobilization and the potential applications in industry and biomedicine are summarized. In addition, we put forward some challenges and possible solutions for the development of this field and some possible development directions in the future.

One-Step Fabrication of Amino-Functionalized Fe3O4@SiO2 Core-Shell Magnetic Nanoparticles as a Potential Novel Platform for Removal of Cadmium (II) from Aqueous Solution

Fe3O4@SiO2-NH2 core-shell magnetic nanoparticles were developed by a rapid one-step precipitation route followed by reverse microemulsion and amine functionalization. In this study, an Fe3O4@SiO2-NH2 nanoparticle was used to evaluate its adsorption efficiency for the treatment of a synthetic solution of Cd(II) ion. The structural and physicochemical properties of Fe3O4@SiO2-NH2 nanoparticles were characterized by XRD, SEM-EDAX, TEM, FTIR and TGA. From the TEM analysis, the morphology of Fe3O4@SiO2-NH2 was found as 100–300 nm. In TGA, the first weight loss was noticed between 373 and 573 K, the second was between 673 and 773 K and the final weight loss took place above 773 K. Batch experimental tests, such as pH, dosage of Fe3O4@SiO2-NH2, Cd(II) ion concentration, temperature as well as interaction time, were conducted and evaluated. Experimental study data were used for the non-linear forms exhibited by isotherms and kinetics of the sorption procedure. The equilibrium adsorption observations were adequately combined with pseudo-first-order kinetics as well as Freundlich isotherm. Monolayer maximum adsorption capacity was found to be 40.02 mg/g, recorded at pH 6 with an interaction time of 30 min, temperature of 303 K and sorbent dose of 2.0 g/L. The thermodynamic study indicated that the adsorption process was an exothermic, spontaneous reaction (−∆oo = −15.46–7.81 (kJ/mol)). The as-synthesized sorbent had excellent recyclability, and its adsorption efficiency was maintained after five cycles of reuse. The findings of the study exhibited the magnetic Fe3O4@SiO2-NH2-nanoparticle as an alternative effective adsorbent in eradicating Cd(II) ions from aqueous solution.

Magnetic Silica-Coated Picolylamine Copper Complex [Fe3O4@SiO2@GP/Picolylamine-Cu(II)]-Catalyzed Biginelli Annulation Reaction

An efficient and heterogeneous novel magnetic silica-coated picolylaminecopper complex [Fe₃O₄@SiO₂@GP/Picolylamine-Cu(II)] was synthesized, characterized, and employed as a magnetically recoverable nanocatalyst in Biginelli condensation for the preparation of biologically active 3,4-dihydropyrimidinones. Fe₃O₄@SiO₂@GP/Picolylamine-Cu(II) was synthesized easily using chemical attachment of the picolylaminecompound on Fe₃O₄@SiO₂@GP, followed by treatment with copper salt in ethanol under reflux conditions. Fe₃O₄@SiO₂@GP/Picolylamine-Cu(II) was affirmed by various analyses such as Fourier transform infrared, thermogravimetric analysis, X-ray diffraction, vibrating-sample magnetometry, field-emission scanning electron microscopy, transmission electron microscopy, DLS, inductively coupled plasma, energy-dispersive X-ray spectrometry, X-ray photoelectron spectroscopy, and Brunauer-Emmett-Teller. The resulting catalyst system was successfully used in the Biginelli reaction through a variety of compounds such as aromatic aldehyde, urea, and ethyl acetoacetate under solvent-free conditions or ethylene glycol at 80 °C and yielded the desired products with high conversions with powerful reusability. The current approach was convenient and clean, and only 0.01 g of the catalyst could be used to perform the reaction. The easy work-up procedure, gram-scale synthesis, usage of nontoxic solvent, improved yield, short reaction times, and high durability of the catalyst are several remarkable advantages of the current approach. Also, the Fe₃O₄@SiO₂@GP/Picolylamine-Cu(II) nanocatalyst could be recycled by an external magnet for eight runs with only a significant loss in the product yields.

Stabilization of enzymes via immobilization: Multipoint covalent attachment and other stabilization strategies

The use of enzymes in industrial processes requires the improvement of their features in many instances. Enzyme immobilization, a requirement to facilitate the recovery and reuse of these water-soluble catalysts, is one of the tools that researchers may utilize to improve many of their properties. This review is focused on how enzyme immobilization may improve enzyme stability. Starting from the stabilization effects that an enzyme may experience by the mere fact of being inside a solid particle, we detail other possibilities to stabilize enzymes: generation of favorable enzyme environments, prevention of enzyme subunit dissociation in multimeric enzymes, generation of more stable enzyme conformations, or enzyme rigidification via multipoint covalent attachment. In this last point, we will discuss the features of an "ideal" immobilization protocol to maximize the intensity of the enzyme-support interactions. The most interesting active groups in the support (glutaraldehyde, epoxide, glyoxyl and vinyl sulfone) will be also presented, discussing their main properties and uses. Some instances in which the number of enzyme-support bonds is not directly related to a higher stabilization will be also presented. Finally, the possibility of coupling site-directed mutagenesis or chemical modification to get a more intense multipoint covalent immobilization will be discussed.

Design of a Schiff Base Complex of Copper Coated on Epoxy-Modified Core-Shell MNPs as an Environmentally Friendly and Novel Catalyst for the One-Pot Synthesis of Various Chromene-Annulated Heterocycles

An ecofriendly inorganic-organic hybrid and novel Schiff base complex of copper coated on epoxy-modified Fe3O4@SiO2 MNPs was successfully designed and prepared from readily available chemicals. In this method, a Schiff base complex as a linker is utilized to protect copper nanoparticles to the core-shell Fe3O4 exterior without agglomeration. The resulted Schiff base complex of copper coated on epoxy-modified Fe3O4@SiO2 MNPs was characterized and confirmed via different analyses such as FT-IR, TGA, XRD, VSM, FE-SEM, TEM, ICP, EDX, and BET. The novel catalyst was examined for the synthesis of various chromene-annulated heterocycles through the one-pot three component reaction of aromatic aldehydes, various phenols (2-hydroxynaphthalene-1,4-dione/resorcinol/β-naphthol), and malononitrile in ethanol at reflux conditions. This method includes important aspects like no usage of column chromatography, very short reaction times, simplicity of product isolation using ethanol, excellent yields, simple procedures, and magnetic recoverability of the catalyst. All in all, our method makes a novel and significant advancement in the synthesis of various chromene-annulated heterocycles.

Circumventing the side effects of L-asparaginase

L-asparaginase is an enzyme that catalyzes the degradation of asparagine and successfully used in the treatment of acute lymphoblastic leukemia. L-asparaginase toxicity is either related to hypersensitivity to the foreign protein or to a secondary L-glutaminase activity that causes inhibition of protein synthesis. PEGylated versions have been incorporated into the treatment protocols to reduce immunogenicity and an alternative L-asparaginase derived from Dickeya chrysanthemi is used in patients with anaphylactic reactions to the E. coli L-asparaginase. Alternative approaches commonly explore new sources of the enzyme as well as the use of protein engineering techniques to create less immunogenic, more stable variants with lower L-glutaminase activity. This article reviews the main strategies used to overcome L-asparaginase shortcomings and introduces recent tools that can be used to create therapeutic enzymes with improved features.

Recent Strategies and Applications for l-Asparaginase Confinement

l-asparaginase (ASNase, EC 3.5.1.1) is an aminohydrolase enzyme with important uses in the therapeutic/pharmaceutical and food industries. Its main applications are as an anticancer drug, mostly for acute lymphoblastic leukaemia (ALL) treatment, and in acrylamide reduction when starch-rich foods are cooked at temperatures above 100 °C. Its use as a biosensor for asparagine in both industries has also been reported. However, there are certain challenges associated with ASNase applications. Depending on the ASNase source, the major challenges of its pharmaceutical application are the hypersensitivity reactions that it causes in ALL patients and its short half-life and fast plasma clearance in the blood system by native proteases. In addition, ASNase is generally unstable and it is a thermolabile enzyme, which also hinders its application in the food sector. These drawbacks have been overcome by the ASNase confinement in different (nano)materials through distinct techniques, such as physical adsorption, covalent attachment and entrapment. Overall, this review describes the most recent strategies reported for ASNase confinement in numerous (nano)materials, highlighting its improved properties, especially specificity, half-life enhancement and thermal and operational stability improvement, allowing its reuse, increased proteolysis resistance and immunogenicity elimination. The most recent applications of confined ASNase in nanomaterials are reviewed for the first time, simultaneously providing prospects in the described fields of application.

Covalent Immobilization of L-Asparaginase and Optimization of Its Enzyme Reactor for Reducing Acrylamide Formation in a Heated Food Model System

Acrylamide is a potent carcinogen and neurotoxin that is mainly formed by the Maillard reaction of asparagine with starch at high temperatures. In this work, a food safety immobilization system for L-asparaginase (L-ASNase) consisting of food-grade agarose (Aga) spheres and N-hydroxysuccinimide esters was developed to decrease the formation of acrylamide in a fluid food model system. L-asparaginase was successfully immobilized with a maximum immobilization efficiency of 68.43%. The immobilized enzymes exhibited superior storage stability and reusability with 93.21 and 72.25% of the initial activity retained after six consecutive cycles and storage for 28 days, indicating its high industrial application potential. Meanwhile, a simplified mathematical model of the enzyme reactor was developed and verified with experiments, which demonstrated its auxiliary role in the design and optimization of reactors. In addition, simulated fluidized food components were continuously catalyzed in the designed packed bed reactor, achieving a reduction rate of nearly 89%.

Amino modified magnetic halloysite nanotube supporting chloroperoxidase immobilization: enhanced stability, reusability, and efficient degradation of pesticide residue in wastewater

Halloysite nanotube (HNT) is a natural bio-compatible and stable nanomaterial available in abundance at low-cost. In this work, HNT was modified by two strategies to make it suitable for supporting immobilization of chloroperoxidase (CPO). Firstly, Fe₃O₄ nanoparticles were deposited on HNT, so magnetic separation can be used instead of centrifugation. Then, the magnetic HNT was modified by 3-aminopropyltriethoxysilane (APTES), which can provide amine group on surface of HNT and meanwhile inhibit the agglomeration of magnetic HNT. Then, HNT-Fe₃O₄ -APTES was linked with branched polyethyleneimine (PEI) to provide more amino for binding with enzyme. The so-prepared CPO@HNT-Fe₃O₄-APTES-PEI showed enhanced enzyme loading, reusability, improved thermal stability and tolerance to organic solvents than free CPO. For example, after 10 repeated uses, CPO@HNT- Fe₃O₄-APTES-PEI can maintain 92.20% of its original activity compared with 65.12% of activity of CPO@HNT-APTES-PEI and 45.69% of activity of CPO@HNT. The kinetic parameters indicated the affinity and specificity of immobilized enzyme to substrate was increased. CPO@HNT-Fe₃O₄-APTES-PEI was very efficient when it was applied in the degradation of pesticides mesotrione in wastewater. The degradation efficiency can reach 90% within 20 min at range of 5-40 μmol·L^-1. These results ensure the potential practical application of this bio-materials in wastewater treatment.

Chemical insight into the adsorption of reactive wool dyes onto amine-functionalized magnetite/silica core-shell from industrial wastewaters

Fe₃O₄ NPs are synthesized by the co-precipitation technique. Moreover, the pristine was coated by silica layer and then functionalized by 3-aminopropyltrimethoxysilane (APTS). The sample possessed saturation magnetization with value equals 37 emu/g which made them to easily separate using external magnet. FT-IR, TGA, EDX, and VSM confirmed the aminosilane loading. The surface topography and composition were characterized using XRD, TEM, SEM, BJH, and BET methods. Where adsorption capacity of the surface toward the removal of four commercial reactive wool dyes (RD), Itowol black (IB), Itowol Red (IR), Sunzol black (SB), and Lanasol blue (LB) have been investigated. The influence variables such as pH, adsorbent dose, dye concentration, and temperature were calculated. Where experimental results fitted to Langmuir isotherm model with q_max equals 161.29, 151.51, 123.45, and 98.20 mg/g, for IR, LB, SB, and IB respectively. The results showed that the RD adsorption described by pseudo-second-order kinetics. The calculated thermodynamic parameters indicated that RD adsorption onto Fe₃O₄@SiO₂-NH₂ was spontaneous and exothermic in nature. The possible mechanisms monitoring RD adsorption on the surface included hydrogen bonding and electrostatic interactions. The reusability of adsorbent carried with four cycles without releasing of magnetite and thus excluding the potential hazardous of nanomaterial to the environment. Graphical abstract.

Magnetic-heteropolyacid mesoporous catalysts for deep oxidative desulfurization of fuel: The influence on the amount of APES used

Magnetic-heteropolyacid mesoporous catalysts have been obtained, in which magnetic Fe₃O₄ in the center of MCM-41 mesoporous materials and APES (3-aminopropyl-triethoxysilane) used to link heteropolyacid. To noted, for the various molar ratio APES used in the synthesized process, different numbers of -OCH₃ were exposed in the final products (zero, one and two), named Fe@MP-1, Fe@MP-2 and Fe@MP-3, respectively. Interestingly, the three kinds of catalysts exhibited the various DBT removal efficiency during the oxidative desulfurization process, mainly due to their structure variance leading to be the research focus in this work. Among them, under the oxygen in air as oxidant, Fe@MP-1, with no -OCH₃ exposed outside, showed the excellent desulfurization activity with 100% DBT conversion in 90 min and behaved nearly no obvious decrease after at least 8 recycling times. Thus, the certain amount of APES, used to link active components with supporters, is suggested as an effective aspect to increase the oxidative desulfurization efficiency and maybe the different types of linkage also show the various influence, which will be focused on in our further researches.

Comparative study of ASNase immobilization on tannic acid-modified magnetic Fe3O4/SBA-15 nanoparticles to enhance stability and reusability

Herein, we report the preparation of tannic acid-modified magnetic Fe₃O₄/SBA-15 nanoparticles and their application as a carrier matrix for immobilization of ASNase, an anticancer enzyme-drug.

Functionalized Silicas for Metal-Free and Metal-Based Catalytic Applications: A Review in Perspective of Green Chemistry

Heterogeneous catalysis plays a key role in promoting green chemistry through many routes. The functionalizable reactive silanols highlight silica as a beguiling support for the preparation of heterogeneous catalysts. Metal active sites anchored on functionalized silica (FS) usually demonstrate the better dispersion and stability due to their firm chemical interaction with FSs. Having certain functional groups in structure, FSs can act as the useful catalysts for few organic reactions even without the need of metal active sites which are termed as the covetous reusable organocatalysts. Magnetic FSs have laid the platform where the effortless recovery of catalysts is realized just using an external magnet, resulting in the simplified reaction procedure. Using FSs of multiple functional groups, we can envisage the shortened reaction pathway and, reduced chemical uses and chemical wastes. Unstable bio-molecules like enzymes have been stabilized when they get chemically anchored on FSs. The resultant solid bio-catalysts exhibited very good reusability in many catalytic reactions. Getting provoked from the green chemistry aspects and benefits of FS-based catalysts, we confer the recent literature and progress focusing on the significance of FSs in heterogeneous catalysis. This review covers the preparative methods, types and catalytic applications of FSs. A special emphasis is given to the metal-free FS catalysts, multiple FS-based catalysts and magnetic FSs. Through this review, we presume that the contribution of FSs to green chemistry can be well understood. The future perspective of FSs and the improvements still required for implementing FS-based catalysts in practical applications have been narrated at the end of this review.

Functionalized Ordered Mesoporous Silicas (MCM-41): Synthesis and Applications in Catalysis

Mesoporous silica sieves are among the most studied nano-objects due to their stable pore structure and easy preparation. In particular, MCM-41 have attracted increasing research attention due to their chemical versatility. This review focuses on the synthesis and regioselective functionalization of MCM-41 to prepare catalytic systems. The topics covered are: mono and di-functionalized MCM-41 as basic and acid catalysts, catalysts based on metallic complexes and heteropolyacids supported onto MCM-41, metallic nanoparticles embed onto functionalized MCM-41 and magnetic MCM-41 for catalytic purposes.

The Toxicity Assessment of Iron Oxide (Fe₃O₄) Nanoparticles on Physical and Biochemical Quality of Rainbow Trout Spermatozoon

The aim of this study was to evaluate the in vitro effect of different doses (50, 100, 200, 400, and 800 mg/L) of Fe₃O₄ nanoparticles (NPs) at 4 °C for 24 h on the kinematics of rainbow trout (Oncorhynchus mykiss, Walbaum, 1792) spermatozoon. Firstly, Fe₃O₄ NPs were prepared at about 30 nm from Iron (III) chloride, Iron (II) chloride, and NH₃ via a co-precipitation synthesis technique. Then, the prepared Fe₃O₄ NPs were characterized by different instrumental techniques for their chemical structure, purity, morphology, surface properties, and thermal behavior. The size, microstructure, and morphology of the prepared Fe₃O₄ NPs were studied by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) spectroscopy, and scanning electron microscopy (SEM) equipped with an energy-dispersive X-ray spectrometer (EDS). The thermal properties of the Fe₃O₄ NPs were determined with thermogravimetric analysis (TGA), differential thermal analysis (DTA), and differential scanning calorimeter (DSC) analysis techniques. According to our results, there were statistically significant (p < 0.05) decreases in the velocities of spermatozoon after treatment with 400 mg/L Fe₃O₄ NPs. The superoxide dismutase (SOD) and catalase (CAT) activities were significant (p < 0.05) decrease after 100 mg/L in after exposure to Fe₃O₄ NPs in 24 h. As the doses of Fe₃O₄ NPs increases, the level of malondialdehyde (MDA) and total glutathione (tGSH) significantly (p < 0.05) increased at doses of 400 and 800 mg/L.

Magnetic-propelled Fe3O4–chitosan carriers enhancel-asparaginase catalytic activity: a promising strategy for enzyme immobilization

Magnetic-propelled carriers comprising magnetic Fe₃O₄–chitosan nanoparticles were immobilized with l-asparaginase (l-ASNase). The enzyme displayed enhanced catalytic activity in a weak magnetic field, and thermal and pH stabilities. The conjugated l-ASNase presented higher thermostability and wider range of pH stability in comparison with those of free l-ASNase. Moreover, the reusability of conjugated l-ASNase significantly improved after immobilization and it retained 60.5% of its initial activity after undergoing 16 cycles. The conjugated l-ASNase maintained more than 50% and 48% initial activity after 4 weeks of storage at 4 °C and room temperature, respectively. Furthermore, we reveal that the activity of conjugated l-ASNase onto magnetic Fe₃O₄–chitosan particles increased by about 3-fold in the weak magnetic field at certain frequencies and flux density compared with that of free l-ASNase. Considering these excellent attributes, the magnetic-propelled mechanism in the transporting and activation of l-ASNase can be used by enhancing the catalytic activity, stability, and efficiency in vital implications for medicinal biotechnology.

A magnetic-propelled carrier comprising chitosan-coated Fe₃O₄ nanoparticles was prepared to enhance the catalytic activity of immobilized l-asparaginase in a weak magnetic field.