Equilibrium, kinetic and mechanism studies of Cu(II) and Cd(II) ions adsorption by modified chitosan beads

Preparation of multifunctional PET membrane and its application in high-efficiency filtration and separation in complex environment

Nowadays, effluent treatment is a severe challenge mainly because of its complex composition, which includes oil, heavy metal ions, and dyes. Developing new intelligent membranes is one of the strategies to tackle these significant challenges in wastewater treatment. In this study, we fabricated asymmetric polyethylene glycol terephthalate (PET) membranes by grafting cross-linked poly (itaconic anhydride) (CL-PITA) nanoparticles onto the irradiated face. These nanoparticles were then functionalized with polyethyleneimine (PEI) and protonated with HCl to introduce numerous active electropositive amine groups. The fundamental purpose was to increase surface roughness, introduce numerous hydrophilic groups, and modify it to create a multi-functional PET membrane to separate complex environments. The promising results demonstrated that the protonated PET-g-ITA/DVB(10)-cat membrane exhibited excellent separation efficiencies (SE) for water/light oil, water/heavy oil and oil-in-water (O/W) emulsion. Compared to PET-g-ITA/DVB(0)-cat, it showed superior performance in SE for O/W emulsion and flux decay for water/light oil after 10 cycles. More interestingly, owing to numerous positively charged active amino groups and negativley charged carboxylate groups, the intelligent membrane exhibited a high removal rate of ca. 90 % for anionic dye (congo red) and heavy metals (Cu2+ and Co2+), showing great potential in complex water treatment environments.

Fabrication and characterization of manganese dioxide (MnO2) nanoparticles and its degradation potential of benzene and pyrene

MnO2 nanoparticles have a wide range of applications, including catalytic abilities due to their oxygen reduction potential. Industrial processes and the burning of organic materials released PAHs into the biosphere which have adverse effects on living organisms when continually exposed. In this study, MnO2 nanoparticles were synthesized chemically using sodium thiosulphate as reducing agent. MnO2 nanoparticles were characterized using UV-visible adsorption spectroscopy and Fourier Transform Infrared Spectroscopy (FTIR). A X-Ray Diffraction Spectrophotometer (XRD), a Scanning Electron Microscopy - Energy Dispersive X-Ray Analyzer (SEM-EDAX), and Dynamic Light Scattering (DLS) were used to identify the crystalline nature and particle size of the fabricated MnO2 nanoparticles. Batch adsorption studies were conducted to identify the optimal conditions for better benzene and pyrene adsorption from aqueous solution using MnO2 nanoparticles. They are also effective in degrading benzene and pyrene by batch adsorption as determined by their adsorption isotherms and kinetics.

Application of Ionic Liquid Crosslinked Hydrogel for Removing Heavy Metal Ions from Water: Different Concentration Ranges with Different Adsorption Mechanisms

Heavy metal wastewater poses a significant environmental challenge due to its harmful effect on organisms and difficult biodegradation. To address this issue, hydrogel has been used as a promising solution for the adsorption of heavy metal ions in water, offering advantages such as low cost, simple design, and environmental friendliness. In this study, we synthetized a novel poly-acrylamide/acrylic acid/vinyl imidazole bromide (PAM/AA/[Vim]Br₂) hydrogel as an effective adsorbent for the removal of Ni^II, Cu^II, Zn^II, and Cr^III from water. The structure of the hydrogel was characterized by using techniques such as Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). By exploring various parameters such as monomer ratio, neutralization degree, crosslinking agent addition amount, and initiator addition amount, the highest swelling ratio of the PAM/AA/[Vim]Br₂ hydrogel reached 40,012%. One of the notable aspects of this study lay in the investigation of the adsorption behavior of the hydrogel towards heavy metal ions at different concentrations. The adsorption isotherm calculations and X-ray photoelectron spectroscopy (XPS) analysis revealed distinct adsorption mechanisms. At low concentrations, the hydrogel exhibits a multilayer physical adsorption mechanism, with heavy metal ion removal rates exceeding 80%; while at high concentrations, it demonstrates a monolayer chemical adsorption mechanism, with heavy metal ion removal rates above 90%. This dual mechanism approach distinguishes our study from previous reports on the removal of heavy metal ions using hydrogels and shows good ion adsorption efficiency at both high and low concentrations. To the best of our knowledge, this is the first report to explore the removal of heavy metal ions from water using hydrogels with such intriguing dual mechanisms. Overall, the utilization of the PAM/PAA/[Vim]Br₂ hydrogel as an adsorbent for heavy metal ion removal presents a promising and innovative approach, contributing to the development of environmentally friendly solutions for heavy metal wastewater treatment.

Isotherms and Kinetic Studies of Copper Removal from Textile Wastewater and Aqueous Solution Using Powdered Banana Peel Waste as an Adsorbent in Batch Adsorption Systems

Heavy metals that are present in surface water and wastewater are becoming a severe environmental problem. Because of its toxicity, heavy metal removal has become the main priority for environmental concerns. Banana peels are low-cost agricultural waste that could be used for heavy metal adsorption in wastewater. The main objective of this study is to evaluate the effective powdered banana peel for the removal of copper (II) from aqueous solutions and real wastewater. The banana peels were collected from domestic waste and ground to get a particle size of 150 µm. Powdered banana peel waste adsorbent (PBPWA) contained moisture content, ash content, volatile matter, and bulk density of 3.8%, 3.5%, 37.5%, and 0.02 g/cm³, respectively. The Fourier-transform infrared spectroscopy (FTIR) results showed that the alkyne, aldehyde, and amide functional groups were dominant in the powdered banana peel surface, and the scanning electron microscope showed the morphology of the adsorbent. Physicochemical characteristics of the raw wastewater revealed that the concentration of Cu (II), Pb (II), COD, BOD5, and Cd (II) were 2.75 mg/L, 2.02 mg/L, 612.16 mg/L, 185.35 mg/L, and 0.01 mg/L, respectively. At pH 5, adsorbent dose of 2g/100 mL, initial copper (II) concentration of 80 mg/L, and contact time of 90 min, the maximum removal efficiency of synthetic wastewater was 96.8% and textile wastewater was 69.0%. The adsorption isotherm fitted well with the Langmuir isotherm model at R² = 0.99. The kinetics of copper (II) adsorption followed the second-order kinetic model better. Finally, these studies showed that banana peel bio-adsorbent is a potential adsorbent for heavy metal removal from synthetic and textile wastewater.

Preparation of metal organic frameworks modified chitosan composite with high capacity for Hg(II) adsorption

In this study, a novel modified chitosan composite adsorbent (UNCS) was prepared by crosslinking between chitosan and metal organic frameworks (MOFs) material UiO-66-NH₂ using epichlorohydrin as crosslinker. The influence of the prepared conditions was investigated. The structure and morphology of the composite were characterized by FT-IR, XRD, SEM, TGA, BET and zeta potential analysis. Effects of different variables for adsorption of Hg(II) on this adsorbent were explored. The kinetic studies indicated that the adsorption process followed the pseudo-second-order kinetic model and the adsorption equilibrium could be reached within 2 h. The adsorption was mainly controlled by chemical process. Adsorption isothermal studies illustrated that the adsorption fitted Langmuir isotherm model, implying the homogeneous adsorption on the surface of the adsorbent. The adsorbent exhibited high uptake and the maximum capacity from Langmuir model could reach 896.8 mg g^-1 at pH 6. Thermodynamic studies showed the spontaneous nature and exothermic nature of the adsorption process. Additionally, the removal of Hg(II) on UNCS could achieve over 90 %. The adsorption-desorption cycled experiments indicated the appropriate reusability of the adsorbent. Hence, this adsorbent would be promising for the removal of Hg(II) from wastewater.

A Novel Chitosan/Nano-Hydroxyapatite Composite for the Adsorptive Removal of Cd(II) from Aqueous Solution

A novel polymer bio-composite based on nano-hydroxyapatite (n-Hap) and chitosan (CS) (CS/n-Hap) was synthesized to effectively address toxic cadmium ions removal from water. The composition and structure of CS/n-Hap bio-composite were analyzed through different characterization techniques. XRD patterns affirmed that the crystalline structure of n-Hap remained unaltered during CS/n-Hap synthesis, while FT-IR spectrum sustained all the characteristic peaks of both CS and n-Hap, affirming the successful synthesis of CS/n-Hap. Adsorption studies, including pH, adsorbent dosage, contact time, initial Cd(II) concentration, and temperature, were carried out to explain and understand the adsorption mechanism. Comparatively, CS/n-Hap bio-composite exhibited better Cd(II) adsorption capacity than pristine CS, with an experimental maximum uptake of 126.65 mg/g under optimized conditions. In addition, the kinetic data were well fitted to the pseudo-second-order model, indicating the formation of chemical bonds between Cd(II) and CS/n-Hap during adsorption. Furthermore, the thermodynamic study suggested that Cd(II) adsorption onto CS/n-Hap was endothermic and spontaneous. The regeneration study showed only about a 3% loss in Cd(II) uptake by CS/n-Hap after five consecutive cycles. Thus, a simple and facile approach was here developed to synthesize an eco-friendly and cost-effective material that can be successfully employed for the removal of toxic heavy metal ions from water.

Micro-mechanism insights into the adsorption of anionic dyes using quaternary ammonium-functionalised chitosan aerogels

The development of adsorbents with outstanding adsorption capacities, wide versatility, and excellent recyclability for the removal of organic dyes remains a challenge. In this study, a quaternised chitosan-based aerogel (QCSA) was fabricated via a facile method to effectively treat concomitant anionic dyes. Porous QCSA with high hydrophilicity, nontoxicity, excellent thermal stability, and sustainability exhibits adsorption properties superior to most previously reported adsorbents. The equilibrium adsorption capacities for Congo red, Sunset yellow, and Methyl orange were 1259.6, 550.2, and 607.5 mg/g, respectively. Notably, the spent QCSA exhibits excellent cyclic performance. The multilayer adsorption, external-internal mass transfer resistance, and adsorption on the active site models were employed to enable a more accurate description of the dynamic characteristics, confirming that double-layer chemisorption was the dominant process. A quantitative analysis of the electrostatic potential and the independent gradient model further verified that electrostatic interactions, hydrogen bonding, and van der Waals forces led to the highly efficient adsorption of dye molecules. Therefore, the eco-friendly and recyclable QCSA is a promising adsorbent for trapping anionic dyes from aquatic systems.

Synthesis of hyperbranched polyamine dendrimer/chitosan/silica composite for efficient adsorption of Hg(II)

The pollution of water system with Hg(II) exerts hazardous effect to ecosystem and public health. Adsorption is considered to be a promising strategy to remove Hg(II) from aqueous solution. Herein, hyperbranched polyamine dendrimer/chitosan/silica composite (SiO₂-FP) was synthesized for the adsorption of aqueous Hg(II). The adsorption performance of SiO₂-FP was comprehensively determined by considering various influencing factors. SiO₂-FP displays good adsorption performance for Hg(II) with the adsorption capacity of 0.79 mmol·g^-1, which is higher than the corresponding chitosan functionalized silica (SiO₂-CTS) by 46.30 %. The optimal solution pH for the adsorption of Hg(II) is 6. Adsorption kinetic indicates the adsorption for Hg(II) can reach equilibrium at 250 min. Adsorption kinetic process can be well fitted by pseudo-second-order (PSO). Adsorption isotherm reveals the adsorption for Hg(II) can be promoted by increasing initial Hg(II) concentration and adsorption temperature. The adsorption isotherm indicates the adsorption process can be described by Langmuir model and the adsorption is a spontaneous, endothermic and entropy-increased process. SiO₂-FP displays excellent adsorption selectivity and can 100 % adsorb Hg(II) with the coexisting of Ni(II), Zn(II), Pb(II), Mn(II), and Co(II). Adsorption mechanism demonstrates -NH-, -NH₂, CN, CONH, -OH, and CO participated in the adsorption. SiO₂-FP exhibits good regeneration property and the regeneration rate can maintain approximately 90 % after five adsorption-desorption cycles.

Synthesis, Characterization and Investigation of Cross-Linked Chitosan/(MnFe2O4) Nanocomposite Adsorption Potential to Extract U(VI) and Th(IV)

A cross-linked chitosan/(MnFe2O4) CCsMFO nanocomposite was prepared using co-precipitation methods and used as a nanomaterial to extract U(VI) and Th(IV) from an aqueous solution based on adsorption phenomena. The contact time of experiments shows a rapid extraction process within 30 min by the CCsMFO nanocomposite. The solution pH acts a critical role in determining qm value, where pH 3.0 was the best pH value to extract both ions. The pseudo-second-order equilibrium model illustrated the kinetics equilibrium modal extraction process. Adsorption isotherm of U(VI) at pH 3.0 by CCsMFO nanocomposite is an endothermic process. In contrast, the adsorption isotherm of Th(IV) at pH 3.0 by CCsMFO nanocomposite is an exothermic process. The reusability of CCsMFO nanocomposite was tested using basic eluents as suitable conditions for the chemical stability of CCsMFO nanocomposite; the reusability results show promising results for the removal of U(VI) adsorbed onto CCsMFO nanocomposite with 77.27%, after 12 h by Na2CO3 as eluent. At the same time, the reusability results show good reusability for removal of U(VI) adsorbed onto CCsMFO nanocomposite with 21.82%, after 8 h by EDTA as eluent.

Removal of Heavy Metal Ions from Wastewater with Poly-ε-Caprolactone-Reinforced Chitosan Composite

Currently, the requirements for adsorbent materials are based on their environmentally friendly production and biodegradability. However, they are also related to the design of materials to sustain many cycles in pursuit of low cost and profitable devices for water treatments. In this regard, a chitosan reinforced with poly-ε-caprolactone thermoplastic composite was prepared and characterized by scanning electron microscopy; Fourier transforms infrared spectroscopy, X-ray diffraction analysis, mechanical properties, as well as erosion and swelling assays. The isotherm and kinetic data were fitted with Freundlich and pseudo-second-order models, respectively. The adsorption equilibrium capacities at pH 6 of Zn(II), Cu(II), Fe(II), and Al(III) were 165.59 ± 3.41 mg/g, 3.91 ± 0.02 mg/g, 10.72 ± 0.11 mg/g, and 1.99 ± 0.22 mg/g, respectively. The adsorbent material lost approximately 6% of the initial mass in the adsorption-desorption processes.

Preparation of a Chitosan-Lead Composite Carbon Aerogel and Its Catalytic Thermal Decomposition Performance on Ammonium Perchlorate

Chitosan-lead (CS-Pb) carbon aerogels were prepared by ionic cross-linking and high-temperature carbonization using chitosan (CS) as the carbon precursor. The obtained carbon aerogels were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), and X-ray photoelectron spectroscopy (XPS). The obtained aerogels have a 3D structure and a large surface area, which can effectively prevent the agglomeration phenomenon of metals. Differential thermal analysis (DTA) was used to analyze the catalytic performance of a carbon aerogel for ammonium perchlorate (AP). The results showed that the CS-Pb carbon aerogel reduced the peak temperature of AP pyrolysis from 703.9 to 627.7 K. According to the Kissinger method calculations, the E_a of AP decomposition decreased about 27.2 kJ/mol. The TG data at different warming rates were analyzed by the Flynne-Walle-Ozawa (FWO) and Kissinger-Akahira-Sunose (KAS) methods, which are two of the isoconversion methods, and the activation energies of AP and AP+CS-Pb-3.5 were calculated. Between the conversion degrees (α) of 0.1 and 0.9, the E_a values obtained by the two isoconversion methods are similar and have a certain match. Also, the two isoconversion methods confirm Kissinger's calculation. Finally, thermogravimetry-mass spectrometry (TG-MS) was used to monitor the gases generated during the thermal decomposition of the AP+CS-Pb-3.5 system in real time.

Synthesis of hybrid biosorbent based on 1,2-cyclohexylenedinitrilotetraacetic acid modified crosslinked chitosan and organo-functionalized calcium alginate for adsorptive removal of Cu(II)

The present study is based on the synthesis of a novel hybrid biosorbent using 1,2-cyclohexylenedinitrilotetraacetic acid modified crosslinked chitosan and amino-thiocarbamate moiety functionalized sodium alginate (CDTA-CS/TSC-CA). The fabricated sorbent was employed to investigate the efficient recovery of Cu(II) from aqueous media. CDTA-CS/TSC-CA was characterized using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). Analysis confirmed the successful modification of both biopolymers and subsequent loading of Cu(II) ions. CDTA-CS/TSC-CA was casted in the form of hydrogel beads having different CDTA-CS to TSC-CA mass ratios i.e., 10.0-40.0% by mass. The hydrogel beads 4CDTA-CS/TSC-CA with CDTA-CS/TSC-CA mass ratio of 40.0% was found most effective for copper sorption. Equilibrium sorption results showed that initial concentration of copper, medium pH, contact time, sorbent dosage and temperature influenced the sorption capacity (q_e). Rate of sorption data was interpreted using different kinetic models and found best fitted with pseudo second order rate expression (R² ≈ 0.99), illustrating that the rate determining step includes the electron density transfer from sorbent coordination sites to central copper ions. Crank's RIDE equation and Elovich chemisorption model (ECM) revealed the presence of two sorption phases, initially rapid sorption followed by comparatively a slow uptake. Equilibrium sorption data was well depicted by Langmuir model and maximum monolayer adsorption capacity (q_m) was computed as 276.53 mg·g^-1 at 298 K. Standard Gibbs free energy change, ∆G° (-19.99, -20.18 and -20.36 kJ/ mol), standard enthalpy change, ∆H° (-8.95 kJmol) and standard entropy change, ∆S° (0.04 kJ/mol K^-1) values suggested that the adsorption process is spontaneous and exothermic. Hence, 4CDTA-CS/TSC-CA was found efficient biosorbent for copper removal from its dilute effluents.

Study on the Performance of Composite Adsorption of Cu2+ by Chitosan/β-Cyclodextrin Cross-Linked Zeolite

In order to remove Cu2+ from wastewater, a kind of microsphere adsorbent (SCDO) with high efficiency for Cu2+ adsorption was prepared by the microdrop condensation method, where chitosan (CTS) and sodium alginate (SA) were used as the matrix to crosslink β-cyclodextrin (β-CD) and zeolite (Zeo). The structure and properties of SCDO were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Upon that, the adsorption performance of SCDO for Cu2+ was studied, in which the effects of pH, initial concentration, dosage, adsorption time and temperature were investigated. The results showed that the removal rate of Cu2+ reached 97.08%, and the maximum adsorption capacity was 24.32 mg/g with the temperature at 30 °C, the dosage of SCDO at 12 g/L, the initial concentration of Cu2+ at 100 mg/L, the pH of the solution at 6.0 and the adsorption time at 120 min, respectively. The adsorption process of Cu2+ by SCDO occurred in accordance with quasi-second-order kinetics model and Langmuir adsorption isotherm. After four repeats of continuous adsorption and desorption, the regenerative removal rate of Cu2+ could still reach 84.28%, which indicated that SCDO had outstanding reusability.

Research progress of adsorption and removal of heavy metals by chitosan and its derivatives: A review

Chitosan has received widespread attention as an adsorbent for pollutants because of its low cost and great adsorption potentials. Chitosan has abundant hydroxyl and amino groups that can bind heavy metal ions. However, it has defects such as sensitivity to pH, low thermal stability, and low mechanical strength, which limit the application of chitosan in wastewater treatment. The functional groups of chitosan can be modified to improve its performance via crosslinking and graft modification. The porosity and specific surface area of chitosan in powder form are not ideal, therefore, physical modification has been attempted to generate chitosan nanoparticles and hydrogel. Chitosan has also been integrated with other materials (e.g. graphene, zeolite) resulting in composite materials with improved adsorption performance. This review mainly focuses on reports about the application of chitosan and its derivatives to remove different heavy metals. The preparation strategy, adsorption mechanism, and factors affecting the adsorption performance of adsorbents for each type of heavy metal are discussed in detail. Recent reports on important organic pollutants (dyes and phenol) removal by chitosan and its derivatives are also briefly discussed.

Efficient Adsorption of Tetracycline from Aqueous Solutions by Modified Alginate Beads after the Removal of Cu(II) Ions

This work dealt with a potential and effective method to reuse modified alginate beads after the removal of Cu(II) ions for efficient adsorption of tetracycline (TC) from aqueous solutions. The modified alginate beads were fabricated by a polyacrylamide (PAM) network interpenetrated in alginate-Ca2+ network (PAM/CA) decorated with polyethylene glycol as a pore-forming agent. The porous PAM/CA was characterized using scanning electron microscopy, Brunauer-Emmett-Teller, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy analysis. The adsorption kinetics, isotherms, adsorption stability, and reusability studies of the adsorbent toward Cu(II) ions were scrutinized. The column performance of porous PAM/CA was tested with Cu(II)-containing electroplating wastewater. After Cu(II) adsorption, the Cu(II)-adsorbed PAM/CA (PAM/CA@Cu) was applied to remove TC from aqueous solutions without any regeneration process. The effects of pH, initial TC concentration, ionic strength, and coexisting ions on the adsorption were also discussed in detail. Compared with many reported adsorbents, the PAM/CA@Cu exhibited an excellent adsorption performance toward TC with a maximum adsorption capacity of 356.57 mg/g predicted by the Langmuir model at pH 5.0 and 30 °C with the absence of coexisting ions. The possible adsorption mechanism of TC onto the PAM/CA@Cu was revealed.

Ninhydrin-functionalized chitosan for selective removal of Pb(II) ions: Characterization and adsorption performance

A chitosan-based adsorbents (CS-Ninhydrin) was prepared by grafting ninhydrin for Pb(II) ions adsorption. SEM-EDS, XRD and FTIR analysis were used to characterize the synthesized CS-Ninhydrin. The static adsorption experiments showed that CS-Ninhydrin had a good removal rate for Pb(II) ions in a wide range of pH 3 to 7, quickly reached equilibrium (120 min) and had a higher adsorption capacity (196 mg/g). Pseudo second-order and Langmuir models showed that the adsorption process of Pb(II) by CS-Ninhydrin was a single-layer chemical adsorption. Temperature experiments showed that the reaction was a spontaneous exothermic process. In the wastewater experiment, CS-Ninhydrin showed an excellent selectivity to Pb(II) ions. The reusability of CS-Ninhydrin was perfect after five adsorption-desorption cycles. The main adsorption mechanism was the chelating and electrostatic action between N and O groups in CS-Ninhydrin and Pb(II) ions. Therefore, the new adsorbent CS-Ninhydrin was expected to promote the wide application of chitosan in Pb(II) adsorption.

Using Coffee Pulp as Bioadsorbent for the Removal of Manganese (Mn (II)) from Synthetic Wastewater

This research focuses on the removal of contaminants from wastewaters as a matter of great interest in the field of water pollution. The first decades of the 21st century have brought numerous approaches for the development of cheaper and more effective adsorbents capable of eliminating heavy metals. The study aims to examine the way coffee pulp (Castilla variety from Caldas, Colombia) was used as a bioadsorbent for the removal of Mn (II) from synthetic wastewater to fulfill goals 3 and 6 proposed in the Sustainable Development Goals stated for the 2030 Agenda, particularly in Sections 3.9 and 6.9. In order to achieve this objective, the agricultural residue was subjected to bromatological characterization, determination of the lignocellulosic composition, and identification of characteristic organic functional groups through IR spectrophotometry, using the ATR (attenuated total reflection) technique. Additionally, the optimal parameters for contaminant removal were identified, regarding the biomass quantity, the optimum pH, the stirring time, the adsorption kinetics, the zero charge potential (pHpzc), the adsorption isotherms, and the explanation of the possible adsorption mechanisms between the contaminant, the surface of the coffee pulp, and the capacity of maximum adsorption. The results show that lignocellulosic material presented a cellulose content of 29.93 ± 0.21% and a lignin content of 19.25 ± 0.16%. The optimum parameters found were as follows: Particle size of 180 µm, contact time from 90 min to 100 RPM, optimum pH of 4.0 pH units, room temperature; the kinetic model adjusted to the bioadsorption process was Ho and McKay’s pseudo-second-order, under an isotherm of the Langmuir model, for which the removal presented was 53.40%, with a maximum adsorption capacity of 8.01 mg·g−1. Finally, the novelty of the reported research consists of using coffee pulp as a bioadsorbent without chemical modification, for the removal of heavy metals, in this case Mn (II), in industrial wastewater, which would be another application of this coffee by-product.

Effective Adsorption of Reactive Black 5 onto Hybrid Hexadecylamine Impregnated Chitosan-Powdered Activated Carbon Beads

In this study, hexadecylamine (HDA) impregnated chitosan-powder activated carbon (Ct-PAC) composite beads were successfully prepared and applied to adsorption of the anionic dye reactive black 5 (RB5) in aqueous solution. The Ct-PAC-HDA beads synthesized with 0.2 g powdered activated carbon (PAC) and 0.04 g HDA showed the highest dye removal efficiency. The prepared beads were characterized using Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Various adsorption parameters, i.e., adsorbent dosage, pH, and contact time, which affect the adsorption performance, were studied in a series of batch experiments. The obtained adsorption data were found to be better represented by Freundlich (R2 = 0.994) and pseudo-second-order (R2 = 0.994) models. Moreover, it was ascertained that the adsorption of RB5 onto Ct-PAC-HDA beads is pH-dependent, and the maximum Langmuir adsorption capacity (666.97 mg/g) was observed at pH 4. It was also proved that Ct-PAC-HDA beads were regenerable for repeated use in the adsorption process.

Amine functionalized egg albumin hydrogel with enhanced adsorption potential for diclofenac sodium in water

The removal of diclofenac sodium (DFS) from wastewater has attracted increasing attention because it is within the extensively prescribed nonsteroidal anti-inflammatory drugs and pose ecotoxicity. Therefore, fabrication of versatile adsorbents of low-cost, higher-effectiveness and excellent recyclability is significant for the treatment of DFS contaminated wastewater. This work reports a promising biobased egg albumin (ALB) hydrogel functionalized with a large density of adsorptive amine sites via polyethyleneimine (PEI). The composite ALB/PEI hydrogel demonstrated an excellent DFS removal capacity, i.e. 232.5 mg/g, in an optimum experimental condition (pH∼6; contact time∼180 min; adsorbent dosage∼0.5 g/L) which revealed to be considerably higher or competitive than many reported adsorbents. The adsorption isotherms better accorded with the Langmuir model and the kinetics with the pseudo second-order model, indicating the mono-layer chemisorption process. Besides, the regeneration steps up to four sequential adsorption/desorption cycles demonstrated an excellent reusability. The Fourier-transform infrared spectrometry (FTIR), and X-ray photoelectron spectroscopy (XPS) results implied that the adsorption process followed via the electrostatic interactions, hydrogen bonding, and π-π stacking between the functionality of hydrogel and aromatic rings of DFS. Considering the low-cost, and an excellent DFS removal capacity, the natural composite ALB/PEI hydrogel could be a promising adsorbent for the treatment of DFS contaminated wastewater.

Composite Polymeric Cryogel Cartridges for Selective Removal of Cadmium Ions from Aqueous Solutions

In this study, composite polymeric cryogel cartridges were achieved by using Cd(II) imprinted poly(hydroxyethyl methacrylate N-methacryloly-(L)-cysteine methylester) beads and poly(hydroxyethyl methacrylate) cryogel cartridges with two different mole ratios of functional monomer. The N-methacryloly-(L)-cysteinemethylester was used as a functional monomer and Cd(II) 1:1 and 2:1, which were then notated as MIP1 and MIP2, respectively. Various characterization methods have confirmed the structural transformation on the MIP1 and MIP2 composite cryogel cartridges by scanning electron microscopy, Fourier-transform infrared spectroscopy-Attenuated Total Reflectance, and swelling tests. The maximum amount of Cd(II) adsorption with composite cryogel cartridges was determined by altering the Cd(II) initial concentration, temperature, and pH values. The maximum adsorption capacity of MIP1 and MIP2 composite cryogel cartridges obtained was 76.35 and 98.8 µmol/g of composite cryogels, respectively. The adsorption studies revealed that the MIP2 possessed a good adsorption performance for Cd(II). The obtained composite cryogel cartridges have a selective, reusable, and cost-friendly potential for the removal of Cd(II) from aqueous solutions, and are used many times without decreasing their adsorption capacities significantly. The Cd(II) removal rate of the MIP1 and MIP2 composite cryogel cartridges from synthetic wastewater samples was determined as 98.8%. The obtained cryogel cartridges’ adsorption material exhibited a good directional removal performance for Cd(II) from wastewater samples.

Facile fabrication of magnetic phosphorylated chitosan for the removal of Co(II) in water treatment: separation properties and adsorption mechanisms

Magnetic phosphorylated chitosan composite (P-MCS), an excellent adsorbent for Co(II), was synthesized in this experiment via a facile fabrication. Its removal efficiency was improved by optimizing pH, contact time, and initial concentration. The adsorption isotherms and kinetic models of Co(II) by P-MCS followed the Langmuir model and the pseudo-second-order model, respectively. However, the rate of adsorption was also affected by intragranular diffusion. The maximum adsorption capacity was 46.1 mg g-1 for Co(II). The results of spectroscopic analysis also indicated that good adsorption performance of Co(II) mainly depends on surface chelation between functional groups and metal ions. The saturation magnetic susceptibilities of P-MCS and P-MCS-Co were 22.29 emu g^-1 and 18.18 emu g^-1, respectively. The excellent magnetic properties of P-MCS enabled the easy achievement of solid-liquid separation via the use of an external magnetic field. In complex aqueous solutions, K⁺, Na⁺, Ca²⁺, and Mg²⁺ have less influence on P-MCS adsorption Co(II), but the adsorption capacity on Co(II) is still good. This study shows the feasibility of using P-MCS to treat wastewater containing Co(II).

Engineering Functionalized Chitosan-Based Sorbent Material: Characterization and Sorption of Toxic Elements

The present study reports the engineering of functionalized chitosan (CH)-based biosorbent material. Herein, a two-step reaction was performed to chemically modify the CH using 1,4-bis(3-aminopropyl) piperazine to incorporate nitrogen basic centers for cations sorption from the aqueous environment. The resultant functionalized chitosan-based sorbent material was designated as CH-ANP and characterized using various analytical techniques, including elemental analysis, Fourier-transform infrared spectroscopy (FTIR), 13C NMR (in solid-state), X-ray diffraction, and thermal analysis. Then, the newly engineered CH-ANP was employed for the removal of copper, lead, and cadmium in the aqueous medium. Langmuir sorption isotherm analysis revealed that the highest sorption abilities achieved were 2.82, 1.96, and 1.60 mmol g−1 for copper, cadmium, and lead, respectively. Linear and nonlinear regression methods were deployed on the sorption data to study the behavior of the Langmuir, the Freundlich, and the Temkin sorption isotherms. Among the four different forms, the Langmuir isotherm type 1 fit well to the experimental data as compared to the other models. It also showed the lowest values of error, and a higher correlation coefficient than the Freundlich and Temkin models; thus it was the best fit with the experimental data compared to the latter two models. In conclusion, the findings suggest that chemically modified novel materials with enhanced Lewis basic centers are useful and promising candidates for the sorption of various toxic cations in aqueous solution.

Spectroscopic investigation of Cu2+, Pb2+ and Cd2+ adsorption behaviors by chitosan-coated argillaceous limestone: Competition and mechanisms

In the present study, the competitive adsorption of Cu²⁺, Pb²⁺, and Cd²⁺ by a novel natural adsorbent (i.e., argillaceous limestone) modified with chitosan (C-AL) was investigated. The results demonstrated that both intraparticle diffusion and chemisorption marked significant contributions to the Cu²⁺ adsorption process by both raw argillaceous limestone (R-AL) and C-AL in mono-metal adsorption systems. Antagonism was found to be the predominant competitive effect for Cu²⁺, Pb²⁺ and Cd²⁺ adsorptions by C-AL in the multi-metal adsorption system. The three-dimensional simulation and FTIR analysis revealed that the presence of Cu²⁺ suppressed Pb²⁺ and Cd²⁺ adsorptions, while the effect of Cd²⁺ on Cu²⁺ and Pb²⁺ adsorptions was insignificant. The spectroscopic analyses evidenced that amide groups in C-AL played a crucial role in metal adsorption. The preferential adsorptions of Pb²⁺ > Cu²⁺ > Cd²⁺ were likely due to the different affinities of the metals to the lone pair of electrons on the N atom from the amide groups and/or the O atoms from the -OH and -COO^- groups on C-AL. The interactions between C-AL and metal ions and between various metal species influenced their competitive adsorption behaviors. C-AL exhibited a superior metal adsorption capacity in comparison with that the capacities of other natural adsorbents reported during the last decade, suggesting its potential practical applications.

Design and synthesis of a calcium modified quaternized chitosan hollow sphere for efficient adsorption of SDBS

In this study, a new pleated hollow sphere material (CS@Ca@CTA) was prepared by mixing chitosan (CS) and calcium chloride (CaCl₂) in acetic acid solutions followed by crosslinking with glutaraldehyde (GA), and quaternized using (3-chloro-2 hydroxypropyl) trimethylammonium chloride (CTA). The natural biopolymer chitosan (CS) was used to prepare an environmentally friendly adsorbent material which can efficiently adsorb sodium dodecylbenzene sulfonate (SDBS). The adsorption of SDBS on CS@Ca@CTA can be efficiently improved by CTA at different pH values and Ca can promote the precipitation. The adsorption process of SDBS is as follows. First, SDBS can be adsorbed by electrostatic attraction and Cl^- of CTA is used to ion exchange DBS^- of SDBS. Then DBS^- can bind stably with the Ca²⁺ in a bidentate form. Furthermore, CS contains NH₂ and OH groups, which can provide enormous vacant active sites to adsorb SDBS, and a pleated surface have an ability to capture SDBS. The results indicated that the saturated adsorption capacity of CS@Ca@CTA up to 2300 mg g^-1 at pH 3.0 within 240 min. Additionally, adsorption kinetics, isotherm and thermodynamic parameters were discussed. The aim of this article is to present CS@Ca@CTA, which has a great effect on adsorbing the SDBS.

Removal of Pb (II) from aqueous solution by sulfur-functionalized walnut shell

Heavy metal lead poses a great threat to organisms and the environment; the removal of lead has drawn more and more attention in recent years. In this paper, the sulfur-containing functional group was grafted onto the walnut shell with xanthate to synthesize a low-cost biosorbent (SWM) for the removal of lead in water. The synthesized adsorbent was characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Brunner-Emmet-Teller (BET). The effects of pH, adsorbent dosage, contact time, initial Pb (II) concentration, and temperature on adsorption were investigated, and the adsorption properties of walnut shells before and after modification were compared. Moreover, adsorption kinetics, adsorption isotherms, and adsorption thermodynamics were studied. The sulfur-containing functional group was confirmed to be successfully grafted onto the walnut shell. The results showed that the adsorption performance of SWM was much better than the unmodified walnut shell due to complexation by sulfur-containing functional group and ion exchange. The Pb (II) adsorption onto SWM was found to follow Temkin isotherm model and has a good correlation with the pseudo-second-order kinetic model. In addition, the adsorption process was spontaneous and exothermic. All the results showed that the high adsorption performance and low cost of SWM make it a potential biosorbent in the treatment of lead-contaminated water.

Carboxymethyl cellulose/polyacrylamide composite hydrogel for cascaded treatment/reuse of heavy metal ions in wastewater

A new bio-based bilateral hydrogel containing carboxymethyl cellulose (CMC) and polyacrylamide (PAM) was prepared for the wastewater remediation. The obtained CMC/PAM composite hydrogel reveals a strong single-ion affinity for copper (Cu^II), lead (Pb^II) and cadmium (Cd^II) ions, as well as multi-ion absorbability with its equilibrium data following the Langmuir adsorption model and its adsorption process abiding by a pseudo-second-order kinetics. To demonstrate its recycled use for the metal ions, the adsorbed Cu^II ions in the hydrogel were reduced in situ to form homogeneously dispersed Cu nanoparticles (NPs), leading to the Cu NPs-loaded CMC/PAM hydrogel. Reduction of 4-nitrophenol to 4-aminophenol with high efficiency was successfully achieved by this Cu NPs-loaded CMC/PAM hydrogel, verifying the hydrogel's dual functionalities towards the wastewater treatment and catalytic application.