Nano-magnetic cross-linked enzyme aggregates of naringinase an efficient nanobiocatalyst for naringin hydrolysis

Combined cross-linked enzyme aggregates of cyclodextrin glucanotransferase and maltogenic amylase from Bacillus lehensis G1 for maltooligosaccharides synthesis

Maltooligosaccharides (MOS) are functional oligosaccharides that can be synthesized through enzymatic cascade reaction between cyclodextrin glucanotransferase (CGTase) and maltogenic amylase (Mag1) from Bacillus lehensis G1. To address the problems of low operational stability and non-reusability of free enzymes, both enzymes were co-immobilized as combined cross-linked enzyme aggregates (Combi-CLEAs-CM) with incorporation of bovine serum albumin (BSA) and Tween 80 (Combi-CLEAs-CM-add). Combi-CLEAs-CM and Combi-CLEAs-CM-add showed activity recoveries of 54.12 % and 69.44 %, respectively after optimization. Combi-CLEAs-CM-add showed higher thermal stability at higher temperatures (40 °C) with longer half-life (46.20 min) as compared to those of free enzymes (36.67 min) and Combi-CLEAs-CM (41.51 min). Both combi-CLEAs also exhibited higher pH stability over pH 5 to pH 9, and displayed excellent reusability with >50 % of initial activity retained after four cycles. The reduction in K_m value of about 22.80 % and 1.76-fold increase in starch hydrolysis in comparison to Combi-CLEAs-CM attested the improvement of enzyme-substrate interaction by Tween 80 and pores formation by BSA in Combi-CLEAs-CM-add. The improved product specificity of Combi-CLEAs-CM-add also produced the highest yield of MOS (492 mg/g) after 3 h. Therefore, Combi-CLEAs-CM-add with ease of preparation, excellent reusability and high operational stability is believed to be highly efficacious biocatalyst for MOS production.

Synthesis and Comparative Studies of Glucose Oxidase Immobilized on Fe3O4 Magnetic Nanoparticles Using Different Coupling Agents

Squaric acid (SA) is a compound with potential to crosslink biomacromolecules. Although SA has become over the last years a well-known crosslinking agent as a result of its good biocompatibility, glutaraldehyde (GA), a compound with proven cytotoxicity is still one of the most used crosslinkers to develop nanomaterials. In this regard, the novelty of the present study consists in determining whether it may be possible to substitute GA with a new bifunctional and biocompatible compound, such as SA, in the process of enzyme immobilization on the surface of magnetic nanoparticles (MNPs). Thus, a direct comparison between SA- and GA-functionalized magnetic nanoparticles was realized in terms of physico-chemical properties and ability to immobilize catalytic enzymes. The optimal conditions of the synthesis of the two types of GOx-immobilized MNPs were described, thus emphasizing the difference between the two reagents. Scanning Electron Microscopy and Dynamic Light Scattering were used for size, shape and colloidal stability characterization of the pristine MNPs and of those coupled with GOx. Binding of GOx to MNPs by using GA or SA was confirmed by FT-IR spectroscopy. The stability of the immobilized and free enzyme was investigated by measuring the enzymatic activity. The study confirmed that the resulting activity of the immobilized enzyme and the optimization of enzyme immobilization depended on the type of reagent used and duration of the process. The catalytic performance of immobilized enzyme was tested, revealing that the long-term colloidal stability of SA-functionalized MNPs was superior to those prepared with GA. In conclusion, the SA-functionalized bioconjugates have a better potential as compared to the GA-modified nanosystems to be regarded as catalytic nanodevices for biomedical purposes such as biosensors.

Application of statistical modeling for the production of highly pure rhamnolipids using magnetic biocatalysts: Evaluating its efficiency as a bioremediation agent

In the present study, highly pure rhamnolipids (RLs) was produced using biocatalysts immobilized on amino-functionalized chitosan coated magnetic nanoparticles. Upon immobilizing naringinase and Candida antarctica lipase B (CaLB) under the optimized conditions, an enhanced operational stability with biocatalytic loads of 935 ± 2.4 U/g (naringinase) and 825 ± 4.1 U/g (CaLB) were achieved. Subsequently, the immobilized biocatalysts were utilized sequentially in a two-step RLs synthesis process. The key parameters involved in RLs production were optimized using artificial neural network (ANN) coupled genetic algorithm (GA) and were compared with composite central design (CCD). On validating the efficiency of both models, mean square errors of 1.58% (CCD) and 1.04% (ANN) were obtained. Optimization of parameters by ANN-GA resulted in 1.2-fold increase in experimental RLs yield (80.53%), which was 1.05-fold higher when compared to CCD model. Further, to establish the efficiency of RLs as a bioremediation agent, it was utilized as washing agent. It was observed that at a soil to RLs volume of 1:05, RLs concentration of 0.4 mg/mL, a 95.35 ± 1.33% removal of Total Petroleum Hydrocarbons (TPHs) was obtained at 35 ℃ and 160 rpm in 75 min. Thus, this strategy provides an efficient biocatalytic toolbox for RLs synthesis, which can be effectively used as a bioremediation agent.

Ternary biogenic silica/magnetite/graphene oxide composite for the hyperactivation of Candida rugosa lipase in the esterification production of ethyl valerate

Oil palm leaves (OPL) silica (SiO₂) can replace the energy-intensive, commercially produced SiO₂. Moreover, the agronomically sourced biogenic SiO₂ is more biocompatible and cost-effective enzyme support, which properties could be improved by the addition of magnetite (Fe₃O₄) and graphene oxide (GO) to yield better ternary support to immobilize enzymes, i.e., Candida rugosa lipase (CRL). This study aimed to optimize the Candida rugosa lipase (CRL immobilization onto the ternary OPL-silica-magnetite (Fe₃O₄)-GO (SiO₂/Fe₃O₄/GO) support, for use as biocatalyst for ethyl valerate (EV) production. Notably, this is the first study detailing the CRL/SiO₂/Fe3O4/GO biocatalyst preparation for rapid and high yield production of ethyl valerate (EV). AFM and FESEM micrographs revealed globules of CRL covalently bound to GL-A-SiO₂/Fe₃O₄/GO; similar to Raman and UV-spectroscopy results. FTIR spectra revealed amide bonds at 3478 cm^-1 and 1640 cm^-1 from covalent interactions between CRL and GL-A-SiO₂/Fe₃O₄/GO. Optimum immobilization conditions were 4% (v/v) glutaraldehyde, 8 mg/mL CRL, at 16 h stirring in 150 mM NaCl at 30 °C, offering 24.78 ± 0.26 mg/g protein (specific activity = 65.24 ± 0.88 U/g). The CRL/SiO₂/Fe₃O₄/GO yielded 77.43 ± 1.04 % of EV compared to free CRL (48.75 ± 0.70 %), verifying the suitability of SiO₂/Fe₃O₄/GO to hyperactivate and stabilize CRL for satisfactory EV production.

A facile preparation of immobilized naringinase on polyethyleneimine-modified Fe3O4 magnetic nanomaterials with high activity

Polyethyleneimine-modified Fe3O4 nanoparticles (Fe3O4-PEI) were synthesized by the one-step co-precipitation method, and the resulting material was used to immobilize naringinase from the fermentation broth of Aspergillus niger FFCC uv-11. The immobilized naringinase activity could reach up to 690.74 U per g-support at the conditions of initial naringinase activity of 406.25 U mL-1, immobilization time of 4 h, glutaraldehyde concentration of 40% (w/v), immobilization temperature of 35 °C, and pH value of 5.5, with naringinase-carrying rate and naringinase activity recovery of 92.93% and 20.89%, respectively. In addition, the immobilized naringinase exhibited good pH and temperature stability in a pH range of 3.5-6.0 and temperature range of 40-70 °C, and the optimal reaction pH and reaction temperature were optimized as 5.5 and 60 °C, respectively. Besides, the immobilized naringinase could maintain 60.58% of the original activity after 10 reuse cycles, indicating that the immobilized naringinase had good reusability. Furthermore, the immobilized naringinase also performed excellent storage stability, 87.52% of enzyme activity still remained as stored at 4 °C for one month. In conclusion, the Fe3O4-PEI could be considered as a promising support for naringinase immobilization, with the advantages of high enzyme activity loading, good reusability, storage stability and rapid recovery.

Cross-linked Enzyme Aggregates of Fibrinolytic Protease BC1 Immobilized on Magnetic Chitosan Nanoparticles (CLEAs-Fib-mChi): Synthesis, Purification, and Characterization

Bacterial fibrinolytic proteases achieved more attention in the prevention and treatment of cardiovascular diseases, so purification, characterization, and activity enhancement are of prime importance. In this study, a fibrinolytic serine metalloprotease was purified from the culture supernatant from Bacillus sp. BC1. It was purified to homogeneity by a two-step procedure with a 24-fold increase in specific activity and a 33.1% yield. It showed 28 kDa molecular weight, while its optimal pH and temperature were obtained 8 and 50-60 °C. The cross-link enzyme aggregates of this fibrinolytic BC1 successfully immobilized on magnetic chitosan nanoparticles. A 52% activity enhancement was obtained by immobilized enzyme at pH 6.0, compared to free protease. K_m values of the free and immobilized proteases were obtained about 0.638 and 0.61 mg/ml, respectively. The free and immobilized enzymes did not show any activity concerning transferrin, γ-globulins, and hemoglobin, as blood plasma proteins. The in vitro blood clot lysis test of the free and immobilized proteases showed a maximum of 42 and 50% clot lysis, which was comparatively higher than that revealed by streptokinase and heparin at the same condition. These results indicated that the free and immobilized proteases have the potential to be effective fibrinolytic agents.

Laccase aggregates via poly-lysine-supported immobilization onto PEGA resin, with efficient activity and high operational stability and can be used to degrade endocrine-disrupting chemicals

Laccase was for the first time immobilized as enzyme aggregates onto PEGA resin using the technique of poly-lysine-supported cross-linking. Immobilized laccase showed efficient enzymatic activity with high operational stability and good reusability.

Preparation and synthetic dye decolorization ability of magnetic cross-linked enzyme aggregates of laccase from Bacillus amyloliquefaciens

Laccases are versatile oxidases that are capable of decolorizing various synthetic dyes. Recombinant Bacillus amyloliquefaciens laccase was immobilized as magnetic cross-linked enzyme aggregates (M-CLEAs) for application in dye decolorization. Several parameters influencing the activity recovery were evaluated during the synthesis of M-CLEAs. With ammonium sulfate as precipitant, maximum activity was recovered by cross-linking with 0.16% glutaraldehyde for 1 h. The prepared M-CLEAs exhibited improved activity under alkaline conditions. It remained 74% activity after incubation at 60 °C for 5 h. Enhanced tolerance towards NaCl was also observed for the M-CLEAs, with 68% activity remaining in the presence of 1 M NaCl. The immobilized laccase could rapidly decolorize more than 93% of reactive black 5 and indigo carmine in 1 h, while its catalytic efficiency towards reactive blue 19 was relatively low. After four cycles of consecutive reuse, the M-CLEAs could decolorize 92% of indigo carmine. The easy recovery and reusability of M-CLEAs facilitate the potential application of bacterial laccase in dye decolorization.

One pot clarification and debittering of grapefruit juice using co-immobilized enzymes@chitosanMNPs

In the present work, enzymes pectinase and naringinase were simultaneously co-immobilized on an eco-friendly chitosan coated magnetic nanoparticles (chitosanMNPs) by cross-linking using chitosan as a macro-molecular cross-linker. The maximum activity recovery of both enzymes in the co-immobilized form was obtained at chitosanMNPs to enzymes ratio of 1:3, 3% cross-linker concentration and 150 min cross-linking time. The synthesized MNPs before and after co-immobilization were characterized using different techniques. The prepared biocatalyst was found spherical with an average size below 200 nm and showed supermagnetic property with saturation magnetization of 38.28 emu/g. The optimum pH and temperature of both enzymes in co-immobilized form was found at 5.5 and 65 °C. The prepared biocatalyst exhibited an improved thermal stability with 1.8-fold increase in the half-life. The secondary structural analysis revealed that, prepared co-immobilized biocatalyst undergone changes in the conformational and structural rigidity due to macro-molecular cross-linker. The co-immobilized biocatalysts were evaluated for one pot clarification and debittering of grapefruit juice and found ~52% reduction in turbidity and ~85% reduction in the naringin content. The co-immobilized enzymes were recycled up to 7^th cycle and can be easily stored at room temperature for 30 days retaining up to 64% and 86% residual activities respectively.

Immobilization of Naringinase from Aspergillus Niger on a Magnetic Polysaccharide Carrier

Naringinase is an enzymatic complex used in the deglycosylation of compounds with a high application potential in the food and pharmaceutical industries. The aim of the study was to immobilize naringinase from Aspergillus niger KMS on a magnetic carrier obtained on the basis of carob gum activated by polyethyleneimine. Response surface methodology was used to optimize naringinase immobilization taking into account the following factors: pH, immobilization time, initial concentration of naringinase and immobilization temperature. The adsorption of the enzyme on a magnetic carrier was a reversible process. The binding force of naringinase was increased by crosslinking the enzyme with the carrier using dextran aldehyde. The crosslinked enzyme had better stability in an acidic environment and at a higher temperature compared to the free form. The immobilization and stabilization of naringinase by dextran aldehyde on the magnetic polysaccharide carrier lowered the activation energy, thus increasing the catalytic capacity of the investigated enzyme and increasing the activation energy of the thermal deactivation process, which confirms higher stability of the immobilized enzyme in comparison with free naringinase. The preparation of crosslinked naringinase retained over 80% of its initial activity after 10 runs of naringin hydrolysis from fresh and model grapefruit juice.

Immobilization of Naringinase from Penicillium decumbens on Chitosan Microspheres for Debittering Grapefruit Juice

Naringinase is an enzyme complex which exhibits α-l-rhamnosidase and β-d-glucosidase activity. This enzymatic complex catalyzes the hydrolysis of naringin (4',5,7-trihydroxy flavanone 7-rhamnoglucoside), the main bittering component in grapefruit. Reduction of the level of this substance during the processing of juice has been the focus of many studies. The aim of the study was the immobilization of naringinase on chitosan microspheres activated with glutaraldehyde and, finally, the use of such immobilized enzyme for debittering grapefruit juice. The effect of naringinase concentration and characterization of the immobilized enzyme compared to the soluble enzyme were investigated. The maximum activity was observed at optimum pH 4.0 for both free and immobilized naringinase. However, the optimum temperature was shifted from 70 to 40 °C upon immobilization. The KM value of the immobilized naringinase was higher than that of soluble naringinase. The immobilization did not change the thermal stability of the enzyme. The immobilized naringinase had good operational stability. This preparation retained 88.1 ± 2.8% of its initial activity after ten runs of naringin hydrolysis from fresh grapefruit juice. The results indicate that naringinase immobilized on chitosan has potential applicability for debittering and improving the sensory properties of grapefruit juices.

Construction of CLEAs-lipase on magnetic graphene oxide nanocomposite: An efficient nanobiocatalyst for biodiesel production

In the present work, cross linked enzyme aggregates of Lipase (CLEAs-lip) was synthesized and immobilized on the magnetic amino functionalized graphene oxide (maGO-CLEAs-lip) nanocomposites. The immobilized lipase showed a broad range of temperature activity about 40-60 °C, as compared to free enzyme. In the case of maGO-CLEAs-lip nanocomposite, the observed lower Km value state 2.25 folds affinity for the p-nitrophenyl palmitate. Enzyme activity of maGO-CLEAs-lip nanocomposite was the highest up to 5 cycles. Storage stability results displayed maGO-CLEAs-lip retained about 75% of its original activity after 30 days of incubation. Remarkably, maGO-CLEAs-lip formed the highest biodiesel construction (78%) from R. communisoil after 24 h of incubation. The biodiesel yield of this nanocomposite was 3.0 folds higher than free enzyme, making it talented as an excellent nanobiocatalyst for efficient production of biodiesel.