Removal of Pb(II) ions from aqueous media using epichlorohydrin crosslinked chitosan Schiff's base@Fe3O4 (ECCSB@Fe3O4)

Pb(II) Adsorption Properties of a Three-Dimensional Porous Bacterial Cellulose/Graphene Oxide Composite Hydrogel Subjected to Ultrasonic Treatment

A three-dimensional porous bacterial cellulose/graphene oxide (BC/GO) composite hydrogel (BC/GO) was synthesized with multi-layer graphene oxide (GO) as the modifier and bacterial cellulose as the skeleton via an ultrasonic shaking process to absorb lead ions effectively. The characteristics of BC/GO were investigated through TEM, SEM, FT-IR, NMR and Zeta potential experiments. Compared to bacterial cellulose, the ultrasonic method and the carboxyl groups stemming from GO helped to enhance the availability of O(3)H of BC, in addition to the looser three-dimensional structure and enriched oxygen-containing groups, leading to a significantly higher adsorption capacity for Pb(II). In this paper, the adsorption behavior of BC/GO is influenced by the GO concentration, adsorption time, and initial concentration. The highest adsorption capacity for Pb(II) on BC/GO found in this study was 224.5 mg/g. The findings implied that the pseudo-second-order model explained the BC/GO adsorption dynamics and that the data of its adsorption isotherm fit the Freundlich model. Because of the looser three-dimensional structure, the complexation of carboxyl groups, and the enhanced availability of O(3)H, bacterial cellulose exhibited a much better adsorption capacity.

Fabrication of a novel polyvinylpyrrolidone/chitosan-Schiff base/Fe2O3 nanocomposite for efficient adsorption of Pb(II) and Hg(II) ions from aqueous solution

A novel magnetic polyvinylpyrrolidone/chitosan-Schiff base/Fe2O3 (PVP/CS-SB/Fe2O3) adsorbent was prepared by one-pot facile co-precipitation route for adsorption of Pb(II) and Hg(II) ions from aqueous solution. Fourier transform infrared-spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscope (SEM), vibrating sample magnetometer (VSM) and Brunauer-Emmett-Teller (BET) were used to characterize the synthesized PVP/CS-SB/Fe2O3. The results predicted that the successfully synthesis of magnetic CSSB-PVP@Fe2O3. The effects of important factors such as pH solution, contact time, concentration of metal ions, adsorbent dose and co-existing ions on Pb(II) and Hg(II) adsorption were investigated. The maximum adsorption capacities of Pb(II) and Hg(II) ions at optimal conditions were 120 mg/g and 102.5 mg/g, respectively. The kinetic studies predicted that the adsorption followed the pseudo-second-order (PSO) model as chemisorption using the coordination of active sites of PVP/CS-SB/Fe2O3 with the metal ions and also n-π interactions. Reproducibility results predicted that the excellent regeneration ability after 6 adsorption cycles. According to the results of this work, the PVP/CS-SB/Fe2O3 nanocomposite is promising for Pb(II) and Hg(II) ions adsorption and can be potential as a simple, low-cost, high-efficient adsorbent for decontamination of other heavy metal ions from aqueous solution.

Fabrication of two novel amino-functionalized and starch-coated CuFe2O4-modified magnetic biochar composites and their application in removing Pb2+ and Cd2+ from wastewater

Novel magnetic biochar composites (SFeCu@SBCO and FeCu@SBCO-NH2) were fabricated by modifying oxidized sawdust biochar (SBCO) with Fe/Cu loading, starch-coating/amination, characterized (FTIR, XRD, BET, SEM-EDS and XPS) and applied in capturing Pb2+ and Cd2+ from wastewater. Adsorption experiments revealed that SFeCu@SBCO and FeCu@SBCO-NH2 exhibited extraordinary adsorption performance toward Pb2+/Cd2+ with the maximum adsorption capacity reaching 184.26/173.35 mg g-1 and 201.43/190.81 mg g-1, respectively, which were >5 times higher than those of SBC. The great increase in adsorption capacity of the two adsorbents was ascribed to the introduction of CuFe2O4 and starch/amino groups. Pb2+ and Cd2+ adsorption was an endothermic reaction controlled by monolayer chemisorption. Complexation and electrostatic attraction were the two predominant mechanisms. Besides, ion exchange together with physical adsorption also occurred during the adsorption. Additionally, the both adsorbents displayed favorable stability and reusability as well as desirable anti-interfering ability to other metal cations. Taken together, the both adsorbents could be utilized as reusable magnetic adsorbents with promising prospect in the effective remediation of Pb2+/Cd2+ contaminated water. The study not only contributed to the better understanding of biochar modification strategy and the application of modified biochar in heavy metals pollutants removal, but also realized resource utilization of biomass waste.

The modified biochar from wheat straw by the combined composites of MnFe2O4 nanoparticles and chitosan Schiff base for enhanced removal of U(VI) ions from aqueous solutions

In the last few decades, U(VI) is a significant environmental threat. The innovative and environmentally friendly adsorbent materials for U(VI) removal were urgent. Preparation of the modified biochar from wheat straw by combined composites of MnFe2O4 nanoparticles and chitosan Schiff base (MnFe2O4@CsSB/BC) was characterized, and adsorption experiments were carried out to investigate the performance and interfacial mechanism of U(VI) removal. The results showed that MnFe2O4@CsSB/BC exhibited high adsorption capacity of U(VI) compared with BC. The adsorption process of U(VI) removal by MnFe2O4@CsSB/BC could be ascribed as pseudo-second-order model and Langmuir model. The maximum adsorption capacity of U(VI) removal by MnFe2O4@CsSB/BC reached 19.57 mg/g at pH4.0, 30 mg/L of U(VI), and 25 °C. The possible mechanism was a chemical adsorption process, and it mainly contained electrostatic attraction and surface complexation. Additionally, it also was an economic and environmental friendly adsorbent.

Chitosan cross-linked and grafted with epichlorohydrin and 2,4-dichlorobenzaldehyde as an efficient adsorbent for removal of Pb(II) ions from aqueous solution

Epichlorohydrin-modified chitosan-Schiff base composite (CS/24Cl/ECH) prepared via the one-pot reaction as characterized by Fourier transform Infra-Red spectroscopy (FT-IR), X-ray powder diffraction (XRD), Differential scanning calorimetry (DSC) and Scanning electron microscope (SEM). Its removal ability of Pb(II) ions from aqueous solution was investigated. The adsorption of Pb(II) ions carried out at different initial pH, dose of CS/24-Cl/ECH, contact time and co-existing ions. The maximum adsorption capacity of Pb(II) ions was 170 mg/g. Finally, based on the absorption results, the adsorption of Pb(II) ions was fitted by single-layer Langmuir isotherm model and the pseudo-second-order (PSO) kinetics model. The absorption mechanism of Pb(II) ions was controlled by chemical coordination Pb(II) ions with the active sites on the surface of CS/24Cl/ECH composite. Also, CS/24Cl/ECH showed excellent recyclable efficiency up to 5 cycle and potential sorbent for other heavy metal ions.

Synthesis and characterization of pendant N,N-dimethylaminobenzaldehyde-functionalized chitosan Schiff base composite (CS@MABA) as a new sorbent for removal of Pb(II) ions from aqueous media

In this work, new pendant N,N-dimethylaminobenzaldehyde-functionalized chitosan Schiff base composite (CS@MABA) was prepared from the simple and convenient condensation reaction between chitosan (CS) and N,N-dimethylaminobenzaldehyde (MABA) in ethanol-glacial acetic acid (1:1 v/v) and characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), differential scanning calorimetry (DSC) and scanning electron microscope (SEM). The as-prepared composite CS@MABA was applied for the removal of Pb(II) ions, due to the presence of imine, hydroxyl and phenyl groups, and the effects of important parameters such as solution pH, contact time and sorbent dosage on the removal percentage and adsorption capacity were investigated and discussed. The optimum conditions were found to be at pH 5, adsorbent dosage of 0.1 g, Pb(II) concentration of 50 mg/L and contact time of 60 min. The maximum Pb(II) removal percentage was found to be 94.28 % with the high adsorption capacity of 165 mg/g. The adsorption capacity of CS@MABA is remain 87 % after 5 adsorption-desorption cycles. The adsorption kinetic and isotherm studies indicated that the Pb(II) removal by CS@MABA follows a pseudo-first order and Langmuir models, respectively. Compared to similar compounds, the synthesized CS@MABA composite has shown a relatively high yield for removing Pb(II) ions. According to these results, the CS@MABA suggested for the sorption of other heavy metals.

Application of new chitosan 2,4-dihydroxyacetophenone Schiff base @SrFe12O19 nanocomposite for remove of Pb(II) ion from aqueous solution

A new chitosan 2,4-dihydroxyacetophenone Schiff base @SrFe₁₂O₁₉ (Cs-SB@SrFe₁₂O₁₉) nanocomposite was successfully prepared by one-pot reaction and fully characterized for its functional groups, morphology, elemental analysis and thermal behavior by FT-IR, XRD, VSM, DSC, TGA, zeta potential, FE-SEM and EDS techniques. The VSM result showed that Cs-SB@SrFe₁₂O₁₉ has M_s of 11.81 emu/g and H_c of 5488 Oe, known as hard magnetic material. Finally, the as-prepared sample utilized as a new sorbent for the removal of Pb(II) ions from aqueous solution by using batch adsorption experiments. The adsorption of Pb(II) was carried out at different pH, contact time and initial dose of Cs-SB@SrFe₁₂O₁₉. The maximum adsorption capacity was found to be 132 mg/g (99 %) at pH 5 and the contact time of 120 min. Finally, the kinetic studies reveals that the adsorption process of Cs-SB@SrFe₁₂O₁₉ followed by the pseudo second order kinetics model. Also, the sample showed excellent recyclable efficiency up to 5 cycles.

Chitosan grafted tetracarboxylic functionalized magnetic nanoparticles for removal of Pb(II) from an aqueous environment

In this study, the chitosan-grafted tetracarboxylic functionalized magnetic nanoparticle (Fe₃O₄@TCA@CS) was synthesized via in situ co-precipitation process and amidation reaction to improve efficiency of adsorption process and obtain cost-effective adsorbents for removal of toxic Pb(II) metal from aqueous environment. The Fe₃O₄@TCA@CS nanocomposite was analyzed by FTIR, TEM-EDX, TGA, XRD, BET, and Zeta potential. The performance of Fe₃O₄@TCA@CS for Pb(II) ions adsorption was achieved as a function of pH, dose, contact time, initial Pb(II) concentration, and temperature. The influence of coexisting ions such as Na⁺, Ca²⁺, Mg²⁺, and Cd²⁺on removal efficiency of Pb(II) was also investigated. The results revealed that the coexisting ions had little influence on Pb(II) removal efficiency. The pseudo-first-order and Freundlich models were better to describe the adsorption of Pb(II) onto Fe₃O₄@TCA@CS and the maximum adsorption capacity of Pb(II) was 204.92 mg/g at pH:5.5; adsorbent dose: 0.015 g; and temperature: 298 K. Thermodynamic studies revealed that the Pb(II) adsorption onto Fe₃O₄@TCA@CS was an exothermic process. In conclusion, the study provides a new, simple, low-cost, and effective chitosan-based magnetic nanocomposite as a promising adsorbent with excellent adsorption capacity, magnetic separation, and reusability for Pb(II) removal from an aqueous environment.

Removal behavior and mechanism of amino/carboxylate-functionalized Fe@SiO2 for Cr(VI) and Cd(II) from aqueous solutions

The novel iron-based reductive particles, functionalized with amino and carboxylic functional groups, were synthesized to remove Cr(VI) and Cd(II) ions from aqueous solutions. The morphological structure and surface functional groups of new composites were characterized with SEM, XRD, FTIR, BET, and other techniques. The influence of pH, initial concentration, adsorbent dosing, and temperature on removal efficiencies were explored by batch experiments. The adsorption capacity of Cr(VI) and Cd(II) increased by 159.95% and 76.60%, respectively, compared with Fe⁰, reaching 47.638 and 62.047 mg/g. EDS and XPS analysis showed most of Cr(VI) was reduced to Cr(III) and precipitated as ferrochrome oxide, and Cd(II) was mainly precipitated as hydroxide. Reduction-precipitation and complexation may predominate in the removal process of Cr(VI), which fitted well with Langmuir and Freundlich models and pseudo-second-order kinetics. While hydrolysis and complexation may prevail for Cd(II), which was suited with Langmuir model and pseudo-second-order kinetics. Having good magnetic properties, the A/C-Fe@SiO₂ particles exhibited excellent reusable stability after four times regeneration experiments, promising a prospect for in-situ remediations of groundwater contaminated by Cr(VI) and Cd(II).

Efficient removal of Pb(II) using modified chitosan Schiff base@Fe/NiFe

A novel modified chitosan Schiff base@Fe₂O₃-NiFe₂O₄ (CsSB@Fe/NiFe) was prepared and characterized using FT-IR, XRD, SEM, EDX, TGA, DSC and VSM. FT-IR and XRD results confirm that the nanoparticles of Fe/NiFe distributed throughout the surface of CS-OH and successfully prepared CsSB@Fe/NiFe. SEM image shows that the Fe/NiFe nanoparticles were assembled in the surface and inside of CS-OH. Coercivity (H_c) of CsSB@Fe/NiFe is ≈ 110 Oe, indicated that it was kind of soft-magnetic materials with saturation magnetization (M_s) of 6.45 emu/g. In addition, CsSB@Fe/NiFe was further explored as an new sorbent for the removal of Pb(II) ion from aqueous solution and the influence of various important parameters such as solution pH, contact time, dosage of adsorbent and initial Pb(II) concentration were studied and optimized. Optimum conditions for Pb(II) removal were found to be pH 5, adsorbent dosage 0.05 g, initial Pb(II) concentration of 75 ppm and contact time of 120 min. The maximum Pb(II) removal percentage was found to be 97%. Also, CsSB@Fe/NiFe shows about 88% Pb(II) removal after five adsorption-desorption cycles. The results suggested that the sorption of Pb(II) onto CsSB@Fe/NiFe was feasible and spontaneous.

Magnetic cross-linked chitosan for efficient removing anionic and cationic dyes from aqueous solution

Herein, a novel magnetic cross-linked chitosan CS-BA@Fe₃O₄ was rationally synthesized by cross-linked with epichlorohydrin and coated with Fe₃O₄ to the acylated chitosan, which was prepared by the reaction of chitosan with benzenetricarboxylic anhydride. The as-obtained absorbent was characterized by FTIR, XRD, VSM, TGA, TEM, BET, SEM and EDS. The results showed that the maximum adsorption capacities of CR and CV were 471.46 ± 16.97 mg/g and 515.91 ± 25.12 mg/g at 318.15 K, respectively. The main adsorption mechanisms were H-bonding and electrostatic interaction. The kinetic data were in good agreement with the pseudo-second-order model and closed to adsorption equilibrium at 30 min. Thermodynamic studies showed that the adsorption on CS-BA@Fe₃O₄ were spontaneous and endothermic. More importantly, the adsorbent exhibited excellent regeneration properties after 6 cycles and remarkable stability under harsh environments including strong acid, strong alkali, multi-salt and mixed dyes conditions. Therefore, abundant efforts revealed a broad application prospect of CS-BA@Fe₃O₄ in water remediation.

New chitosan Schiff base and its nanocomposite: Removal of methyl green from aqueous solution and its antibacterial activities

New chitosan Schiff base (CS-NB) and its CS-NB-NiFe nanocomposite have been prepared and characterized by FTIR spectroscopy, XRD, SEM and DSC. FT-IR spectra and XRD patterns revealed the preparation of chitosan Schiff base CS-NB and its CS-NB-NiFe nanocomposite. DSC demonstrated the endo and exothermic correspondence the evaporation of solvent and decomposition of pyranose ring, respectively. Antibacterial activities was evaluated for the as-prepared compounds against two Gram-positive (Staphylococcus aureus and Bacillus cereus) and two Gram-negative (Escherichia coli and Pseudomonas aeruginosa) bacteria and the results shows that the antibacterial activities of the compounds are found to be stronger than that of chitosan. The order of antibacterial effect according to inhibitory zone around is as follows: S. aureus > E. coli > B. cereus > P. aeruginosa. In addition, the removal of methyl green (MG) dye using CS-NB and its CS-NB-NiFe nanocomposite were analyzed and results showed that the compounds can be effectively used to remove of MG from aqueous solution. Results show that the percentage removal of MG by nanocomposite is higher than Schiff base.

Electrical Writing Induced Covalent Cross-Linking on Hydrogel for Multidimensional Structural Information Storage

The storage of dynamic information in hydrogel is extremely interesting due to the reprogrammable and responsive features of hydrogel. Here, we report that structural information can be stored in polysaccharide hydrogel by electrically induced covalent cross-linking, and the imbedded information can be retrieved by different means (dye adsorption, protonation of chitosan, and acid dissolution). Taking the advantage of diffusible feature of hydrogel, OH^- was generated from the contacting area of the electrode and controllably diffused by electrical writing, thus the high pH domain (pH ∼ 10) triggered covalent cross-linking of the hydrogel. The written area exhibits different micromorphology, chemical properties, and pH sensitivity, allowing dynamic 2D and 3D information to be stored and read when necessary. This work demonstrates the use of stable electrical inputs to store dynamic structural information in a biopolymer-based hydrogel and how the chemical and physical varies allow eye recognition to the embedded information.

Optimally designed theranostic system based folic acids and chitosan as a promising mucoadhesive delivery system for encapsulating curcumin LbL nano-template against invasiveness of breast cancer

Curcumin is a potential candidate in cancer therapy due to its ability to inhibit many signalling pathways at the same time of exposure because of its unique content of aromatic ring, B diketone, olefinic linker, and O methoxy phenolic groups. Its applications in biomedical therapy is limited because of its sensitivity, and its rapid degradation. In the current study, curcumin inserted into polyelectrolyte pairs (protamine and dextran) and then was functionalized by folic acid conjugated chitosan used for the first time, as theranostic system. Such this strategy allows to improve its mucoadhesion and penetration that increases their accumulation inside cancer cells. CUR-LbL NPs were then used to investigate drug release inside Human Mammary Carcinoma (MCF-7 cell lines) after their incubations for 3 h, 6 h and 24 h. Flow cytometry indicated that the percentages of apoptosis, necrosis and cell cycle arrest were increased significantly in MCF-7 cell lines treated by CUR-LbL NPs. Furthermore, SEM image showed many debris in the section of MCF-7 treated by CUR-LbL NPs. Here, it can be summarized that curcumin functionalized by multi-layered polyelectrolyte capsules can be used as a model to study the fate of the adsorbed nanocarriers and to investigate the drug release inside cells.

Synthesis of new chitosan Schiff base and its Fe2O3 nanocomposite: Evaluation of methyl orange removal and antibacterial activity

New chitosan Schiff base (3EtO-4OH/Chit) and its 3EtO-4OH/Chit/Fe₂O₃ nanocomposite were synthesized and characterized by FTIR, ¹H NMR, XRD, TGA, DSC and SEM. The result confirmed the preparation of 3EtO-4OH/Chit and its 3EtO-4OH/Chit/Fe₂O₃ nanocomposite. The efficiency of the prepared catalysts was studied for the methyl orange (MO) removal from aqueous solution. The effect of adsorbent dose and contact time on the removal of dye has been studied. Their antibacterial activities were considered against two Gram positive (S. aureus and B. cereus) and two Gram negative (E. coli and P. aeruginosa) bacteria and the results showed that the activity of the 3EtO-4OH/Chit/Fe₂O₃ is excellent and is more than chitosan and 3EtO-4OH/Chit. Thermogravimetry studies shows that the weight loss stages and the residual value at 600 °C are different for the two compounds. DSC curve of the title compounds 3EtO-4OH/Chit and 3EtO-4OH/Chit/Fe₂O₃ is different from each other. The reason for this difference could be due to the presence of iron oxide nanoparticles in 3EtO-4OH/Chit/Fe₂O₃.

Mitigation of environmentally-related hazardous pollutants from water matrices using nanostructured materials - A review

An unprecedented rise in population growth and rapid worldwide industrial development are associated with the increasing discharge of a range of toxic and baleful compounds. These toxic pollutants including dyes, endocrine-disrupters, heavy metals, personal care products, and pharmaceuticals are destructing nature's balance and intensifying environmental toxicity at a disquieting rate. Therefore, finding better, novel and more environmentally sound approaches for wastewater remediation are of great importance. Nanoscale materials have opened up some new horizons in various fields of science and technology. Among a range of treatment technologies, nanostructured materials have recently received incredible interest as an emerging platform for wastewater remediation owing to their exceptional surface-area-to-volume ratio, unique electrical and chemical properties, quantum size effects, high scalability, and tunable surface functionalities. An array of nanomaterials including noble metal-based nanostructures, transition metal oxide nanomaterials, carbon-based nanomaterials, carbon nanotubes, and graphene/graphene oxide nanomaterials to their novel nanocomposites and nanoconjugates have been attempted as the promising catalysts to overcome environmental dilemmas. In this review, we summarized recent advances in nanostructured materials that are particularly engineered for the remediation of environmental contaminants. The toxicity of various classes of relevant tailored nanomaterials towards human health and the ecosystem along with perspectives is also presented. In our opinion, an overview of the up-to-date advancements on this emerging topic may provide new ideas and thoughts for engineering low-cost and highly-efficient nanostructured materials for the abatement of recalcitrant pollutants for a sustainable environment.

Functional group-rich hyperbranched magnetic material for simultaneous efficient removal of heavy metal ions from aqueous solution

In order to achieve the purpose of simultaneous removal of coexisting heavy metal ions, in this work, functionalized magnetic mesoprous nanomaterials (Fe₃O₄-HBPA-ASA) with high density and multiple adsorption sites were designed and prepared. The obtained Fe₃O₄-HBPA-ASA was characterized by SEM, FTIR, VSM, TGA and zeta potential. Cu(II), Pb(II) and Cd(II) were chosen as the model heavy metal ions, the adsorption experiments showed that Fe₃O₄-HBPA-ASA showed hightheoretical adsorption capacitiesin individual system, and the maximum adsorption capacity was 136.66 mg/g, 88.36 mg/g and 165.46 mg/g, respectively. In the binary and ternary systems, the competitive adsorption leads to a decrease in the adsorption capacity of Cu(II), Pb(II) and Cd(II). However, in the ternary system with a concentration lower than 15 mg/L, the simultaneous removal rate was still higher than 90%. The adsorption isotherms and kineticswere well fitted by Langmuir and pseudo-second-order models, respectively. The XPS and density functional theory (DFT) analysis have confirmed that the adsorption of metal ions was related to various types of functional groups on the surface of Fe₃O₄-HBPA-ASA, while the adsorption mechanisms of Cu(II), Cd(II) and Pb(II) were different.

Novel magnetically separable anhydride-functionalized Fe3O4@SiO2@PEI-NTDA nanoparticles as effective adsorbents: synthesis, stability and recyclable adsorption performance for heavy metal ions

In this paper, a novel adsorbent, Fe₃O₄@SiO₂@PEI-NTDA, was first prepared by the immobilization of an amine and anhydride onto magnetic Fe₃O₄@SiO₂ nanoparticles with polyethylenimine (PEI) and 1,4,5,8-naphthalenetetracarboxylic-dianhydride (NTDA) for the removal of heavy metal ions from aqueous solutions. The structure of Fe₃O₄@SiO₂@PEI-NTDA was systematically investigated; the results confirmed that amine and anhydride groups were successfully covalently grafted onto the surface of Fe₃O₄@SiO₂, which showed a homogenous core–shell structure with three layers of about 300 nm diameter (Fe₃O₄ core: 200 nm, nSiO₂ layer: 20 nm, and PEI-NTDA layer: 20 nm). The adsorption performance of Fe₃O₄@SiO₂@PEI-NTDA NPs was evaluated for single Pb²⁺ and coexisting Cd²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ ions in an aqueous solution in a batch system. The amine and anhydride groups may have a synergistic effect on Pb²⁺ removal through electrostatic interactions and chelation; Fe₃O₄@SiO₂@PEI-NTDA NPs exhibited preferable removal of Pb²⁺ with maximum adsorption capacity of 285.3 mg g⁻¹ for Pb²⁺ at a solution pH of 6.0, adsorbent dosage of 0.5 g L⁻¹, initial Pb²⁺ concentration of 200 mg L⁻¹ and contact time of 3 h. The adsorption mechanism conformed well to the Langmuir isotherm model, and the adsorption kinetic data were found to fit the pseudo-second order model. Fe₃O₄@SiO₂@PEI-NTDA NPs could be recovered easily from their dispersion by an external magnetic field and demonstrated good recyclability and reusability for at least 6 cycles with a high adsorption capacity above 204.5 mg g⁻¹. The magnetic adsorbents showed high stability with a weight loss below 0.65% in the acid leaching treatment by 2 M HCl solution for 144 h. This study indicates that Fe₃O₄@SiO₂@PEI-NTDA NPs are new promising adsorbents for the effective removal of Pb²⁺ in wastewater treatment.

A magnetically separable adsorbent, anhydride-functionalized Fe₃O₄@SiO₂@PEI-NTDA, was successfully constructed for removal of heavy metal ions from aqueous solution.