Chemical modification of alginate with cysteine and its application for the removal of Pb(II) from aqueous solutions

Sustainable soy protein microsponges for efficient removal of lead (II) from aqueous environments

Protein-based materials recently emerged as good candidates for water cleaning applications, due to the large availability of the constituent material, their biocompatibility and the ease of preparation. In this work, new adsorbent biomaterials were created from Soy Protein Isolate (SPI) in aqueous solution using a simple environmentally friendly procedure. Protein microsponge-like structures were produced and characterized by means of spectroscopy and fluorescence microscopy methods. The efficiency of these structures in removing lead (Pb²⁺) ions from aqueous solutions was evaluated by investigating the adsorption mechanisms. The molecular structure and, consequently, the physico-chemical properties of these aggregates can be readily tuned by selecting the pH of the solution during production. In particular, the presence of β-structures typical of amyloids as well as an environment characterized by a lower dielectric constant seem to enhance metal binding affinity revealing that hydrophobicity and water accessibility of the material are key features affecting the adsorption efficiency. Presented results provide new knowledge on how raw plant proteins can be valorised for the production of new biomaterials. This may offer extraordinary opportunities towards the design and production of new tailorable biosorbents which can also be exploited for several cycles of purification with minimal reduction in performance. SYNOPSIS: Innovative, sustainable plant-protein biomaterials with tunable properties are presented as green solution for water purification from lead (II) and the structure-function relationship is discussed.

Rheological and Self-Healing Behavior of Hydrogels Synthesized from l-Lysine-Functionalized Alginate Dialdehyde

Alginate dialdehyde and l-lysine-functionalized alginate dialdehyde were prepared to provide active aldehyde and l-lysine sites along the alginate backbone, respectively. Different concentrations of substrates and the reduction agent were added, and their influence on the degree of l-lysine substitution was evaluated. An amination reduction reaction (with l-lysine) was conducted on alginate dialdehyde with a 31% degree of oxidation. The NMR confirmed the presence of l-lysine functionality with the degree of substitution of 20%. The structural change of the polymer was observed via FTIR spectroscopy, confirming the formation of Schiff base covalent linkage after the crosslinking. The additional l-lysine sites on functionalized alginate dialdehyde provide more crosslinking sites on the hydrogel, which leads to a higher modulus storage rate than in the original alginate dialdehyde. This results in dynamic covalent bonds, which are attributed to the alginate derivative-gelatin hydrogels with shear-thinning and self-healing properties. The results suggested that the concentration and stoichiometric ratio of alginate dialdehyde, l-lysine-functionalized alginate dialdehyde, and gelatin play a fundamental role in the hydrogel's mechanical properties.

Adsorption behavior and mechanism of Lead (Pb2+) by sulfate polysaccharide from Enteromorpha prolifera

Lead (Pb²⁺) pollution poses severe healthy and ecological risks to humans. In this work, sulfate polysaccharide from Enteromorpha prolifera (SPE) was utilized for Pb²⁺ adsorption from simulated intestinal fluid. In order to evaluate its adsorption behaviors comprehensively, batch adsorption of Pb²⁺ was investigated under different conditions. Results showed that SPE presents high adsorption ability for Pb²⁺ through chemical adsorption process and the maximum adsorption capacity for Pb²⁺ was 278.5 mg/g. And SPE exhibited higher removal efficiency (≥60%) for trace Pb²⁺ (<10 mg/L) compared to that of other adsorbents based on polysaccharide. Besides, its adsorption can be described by Langmuir isotherm and pseudo-second-order kinetic models. Further, XRD, FTIR, and XPS were used to characterize the possible interaction of Pb²⁺ with SPE, and the results showed that carboxyl and hydroxyl groups in SPE play more important role than that of sulfate group. Our work represents the first assessment of Pb²⁺ adsorption properties of SPE. This investigation highlights the potential application of SPE to protect the body from hazard of food-derived heavy metals.

Preparation and Characterization of Plasma-Derived Fibrin Hydrogels Modified by Alginate di-Aldehyde

Fibrin hydrogels are one of the most popular scaffolds used in tissue engineering due to their excellent biological properties. Special attention should be paid to the use of human plasma-derived fibrin hydrogels as a 3D scaffold in the production of autologous skin grafts, skeletal muscle regeneration and bone tissue repair. However, mechanical weakness and rapid degradation, which causes plasma-derived fibrin matrices to shrink significantly, prompted us to improve their stability. In our study, plasma-derived fibrin was chemically bonded to oxidized alginate (alginate di-aldehyde, ADA) at 10%, 20%, 50% and 80% oxidation, by Schiff base formation, to produce natural hydrogels for tissue engineering applications. First, gelling time studies showed that the degree of ADA oxidation inhibits fibrin polymerization, which we associate with fiber increment and decreased fiber density; moreover, the storage modulus increased when increasing the final volume of CaCl₂ (1% w/v) from 80 µL to 200 µL per milliliter of hydrogel. The contraction was similar in matrices with and without human primary fibroblasts (hFBs). In addition, proliferation studies with encapsulated hFBs showed an increment in cell viability in hydrogels with ADA at 10% oxidation at days 1 and 3 with 80 µL of CaCl₂; by increasing this compound (CaCl₂), the proliferation does not significantly increase until day 7. In the presence of 10% alginate oxidation, the proliferation results are similar to the control, in contrast to the sample with 20% oxidation whose proliferation decreases. Finally, the viability studies showed that the hFB morphology was maintained regardless of the degree of oxidation used; however, the quantity of CaCl₂ influences the spread of the hFBs.

Chitosan- and Alginate-Based Hydrogels for the Adsorption of Anionic and Cationic Dyes from Water

Novel hydrogel systems based on polyacrylamide/chitosan (PAAM/chitosan) or polyacrylic acid/alginate (PAA/alginate) were prepared, characterized, and applied to reduce the concentrations of dyes in water. These hydrogels were synthetized via a semi-interpenetrating polymer network (semi-IPN) and then characterized by Fourier transformed infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA), and their swelling capacities in water were measured. In the adsorption experiments, methylene blue (MB) was used as a cationic dye, and methyl orange (MO) was used as an anionic dye. The study was carried out using a successive batch method for the dye absorption process and an equilibrium system to investigate the adsorption of MO on PAAM/chitosan hydrogels and MB on PAA/alginate in separate experiments. The results showed that the target hydrogels were synthetized with high yield (more than 90%). The chemical structure of the hydrogels was corroborated by FTIR, and their high thermal stability was verified by TGA. The absorption of the MO dye was higher at pH 3.0 using PAAM/chitosan, and it had the ability to remove 43% of MO within 10 min using 0.05 g of hydrogel. The presence of interfering salts resulted in a 20–60% decrease in the absorption of MO. On the other hand, the absorption of the MB dye was higher at pH 8.5 using PAA/alginate, and it had the ability to remove 96% of MB within 10 min using 0.05 g of hydrogel, and its removal capacity was stable for interfering salts.

In situ siloxane passivation of colloidal lead halide perovskite via hot injection for light-emitting diodes

All-inorganic cesium lead halide perovskite (CsPbX₃; X = Cl, Br) nanocrystals (NCs) are synthesized via a modified hot injection method using 3-mercaptopropyltrimethoxysilane (MPTMS), together with oleic acid and oleylamine, for in situ passivation of the surface defects. The surface chemistry, revealed by Fourier transform infrared spectroscopy (FTIR) and x-ray photoelectron spectroscopy (XPS) techniques, shows an absence of Si-O-Si network and C-O groups on these in situ passivated CsPbX₃ NCs, denoted as InMP-CsPbX₃, which is in strong contrast to the counterpart NCs obtained via a postsynthesis exchange strategy. The x-ray diffraction (XRD) pattern indicates a lattice structure significantly strained from the cubic structure. The synthesis of these InMP-CsPbX₃ NCs is highly reproducible, and the colloids are stable in nonpolar solvents. The emission wavelength of CsPb(Cl/Br)₃ mixed halide perovskite NCs is tuned from 405 nm to 508 nm by reducing the nominal Cl/Br ratio, while the photoluminescence quantum yield (PLQY) is greatly enhanced over the whole spectral range. More importantly, the InMP-treatment is among the few strategies that are promising for electroluminescence in light-emitting diodes.

Dual-Responsive Alginate Hydrogel Constructed by Sulfhdryl Dendrimer as an Intelligent System for Drug Delivery

Intelligent stimulus-triggered release and high drug-loading capacity are crucial requirements for drug delivery systems in cancer treatment. Based on the excessive intracellular GSH expression and pH conditions in tumor cells, a novel glutathione (GSH) and pH dual-responsive hydrogel was designed and synthesized by conjugates of glutamic acid-cysteine dendrimer with alginate (Glu-Cys-SA) through click reaction, and then cross-linked with polyethylene glycol (PEG) through hydrogen bonds to form a 3D-net structure. The hydrogel, self-assembled by the inner disulfide bonds of the dendrimer, is designed to respond to the GSH heterogeneity in tumors, with a remarkably high drug loading capacity. The Dox-loaded Glu-Cys-SA hydrogel showed controlled drug release behavior, significantly with a release rate of over 76% in response to GSH. The cytotoxicity investigation indicated that the prepared DOX-loaded hydrogel exhibited comparable anti-tumor activity against HepG-2 cells with positive control. These biocompatible hydrogels are expected to be well-designed GSH and pH dual-sensitive conjugates or polymers for efficient anticancer drug delivery.

Lead(II) ions adsorption onto amyloid particulates: An in depth study

The production of new cost-effective biocompatible sorbent sustainable materials, with natural origins, able to remove heavy metals from water resources is nowadays highly desirable in order to reduce pollution and increase clean water availability. In this context, self-assembled protein materials with amyloid structures seem to have a great potential as natural platform for a broader development of highly-tunable structures. In this work we show how protein particulates, a generic form of protein aggregates, with spherical micro sized shape can be used as adsorbents of Pb²⁺ ions from aqueous solution. The effect of pH, ionic medium, ionic strength and temperature of the metal ion solution on the adsorption ability and affinity has been evaluated revealing the complexity of adsorption mechanisms which are the result of the balance of specific interactions with functional groups in protein structure and not specific ones common to all polypeptide chains, and possibly related to amyloid state and to modification of particulates hydration layer.

Preparation of biochar-interpenetrated iron-alginate hydrogel as a pH-independent sorbent for removal of Cr(VI) and Pb(II)

Herein, a pH-independent interpenetrating polymeric networks (Fe-SA-C) were fabricated from graphitic biochar (BC) and iron-alginate hydrogel (Fe-SA) for removal of Cr(VI) and Pb(II) in aqueous solution. Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and scanning electron microscope (SEM) results demonstrated that graphitic BC interpenetration increased surface porosity and distorted surfaces of Fe-SA, which boosted availability of hydroxyl (-OH) group. Fe³⁺ as a cross-linking agent of the alginate endowed Fe-SA-C with positive surfaces (positive zeta potential) and excellent pH buffering capacity, while excessive Fe³⁺ was soldered on Fe-SA-C matrix as FeO(OH) and Fe₂O₃. Cr(VI) removal at pH of 3 by Fe-SA-C (20.3 mg g^-1) were 30.3% and 410.6% greater than that by Fe-SA and BC, respectively. Fe-SA-C exhibited minor pH dependence over pH range of 2-7 towards Cr(VI) retention. Greater zeta potential of Fe-SA-C over Fe-SA conferred a better electrostatic attraction with Cr(VI). FTIR and XPS of spent sorbents confirmed the reduction accounted for 98.5% for Cr(VI) removal mainly due to participation of -OH. Cr(VI) reduction was further favored by conductive carbon matrix in Fe-SA-C, as evidenced by more negative Tafel corrosion potential. Reductively formed Cr(III) was subsequently complexed with carboxylic groups originating from oxidation of -OH. Thus, Cr(VI) removal invoked electrostatic attraction, reduction, and surface complexation mechanisms. Pb(II) removal with excellent pH independence was mainly ascribed to surface complexation and possible precipitation. Thus, the functionalized, conductive, and positively-charged Fe-SA-C extended its applicability for Cr(VI) and Pb(II) removal from aqueous solutions in a wide pH range. This research could expand the application of hydrogel materials for removal of both cationic and anionic heavy metals in solutions over an extended pH range.

Biophysico-Chemical Properties of Alginate Oligomers Obtained by Acid and Oxidation Depolymerization

The aim of the study was to obtain alginate oligosaccharides by using two degradation methods of sodium alginate (SA): with hydrochloric acid (G—guluronate, M—mannuronate and G + M fractions) and hydrogen peroxide (HAS—hydrolyzed SA), in order to assess and compare their biological activity and physico-chemical properties, with an attempt to produce gels from the obtained hydrolysates. The efficiency of each method was determined in order to select the fastest and most efficient process. The ferric ion reducing antioxidant power (FRAP), the ability to scavenge DPPH free radicals, rheological properties, Fourier Transformed Spectroscopy (FTIR) and the microbiological test against Escherichia coli and Staphylococcus aureus were performed. In order to check the functional properties of the obtained oligosaccharides, the texture profile analysis was assessed. The hydrolysis yield of acid SA depolymerization was 28.1% and from hydrogen peroxide SA, depolymerization was 87%. The FTIR analysis confirmed the degradation process by both tested methods in the fingerprint region. The highest ferric reducing antioxidant power was noted for HSA (34.7 µg), and the highest hydroxyl radical scavenging activity was obtained by G fraction (346 µg/Trolox ml). The complete growth inhibition (OD = 0) of alginate hydrolysates was 1%. All tested samples presented pseudoplastic behavior, only HSA presented the ability to form gel.

ER, Venâncio T, Valderrama AC. Functionalization of an Alginate-Based Material by Oxidation and Reductive Amination

This research focused on the synthesis of a functional alginate-based material via chemical modification processes with two steps: oxidation and reductive amination. In previous alginate functionalization with a target molecule such as cysteine, the starting material was purified and characterized by UV-Vis, ¹H-NMR and HSQC. Additionally, the application of FT-IR techniques during each step of alginate functionalization was very useful, since new bands and spiked signals around the pyranose ring (1200–1000 cm⁻¹) and anomeric region (1000–750 cm⁻¹) region were identified by a second derivative. Additionally, the presence of C₁-H₁ of β-D-mannuronic acid residue as well as C₁-H₁ of α-L-guluronic acid residue was observed in the FT-IR spectra, including a band at 858 cm⁻¹ with characteristics of the N-H moiety from cysteine. The possibility of attaching cysteine molecules to an alginate backbone by oxidation and post-reductive amination processes was confirmed through ¹³C-NMR in solid state; a new peak at 99.2 ppm was observed, owing to a hemiacetal group formed in oxidation alginate. Further, the peak at 31.2 ppm demonstrates the presence of carbon -CH₂-SH in functionalized alginate—clear evidence that cysteine was successfully attached to the alginate backbone, with 185 μmol of thiol groups per gram polymer estimated in alginate-based material by UV-Visible. Finally, it was observed that guluronic acid residue of alginate are preferentially more affected than mannuronic acid residue in the functionalization.

Xanthation of alginate for heavy metal ions removal. Characterization of xanthate-modified alginates and its metal derivatives

Xanthates are widely used in mining industry as collectors for its high affinity towards metal sulfides and precious metal ores. The possibility of using alginate for xanthation has not been explored yet despite the feasibility by the presence of hydroxyl groups alongside the polymeric chains. Therefore, this work aims to evaluate the alginate as a matrix for xanthation and its application on heavy metal ions removal. In order to obtain green materials, important pararmeter were explored such as the effect of reaction time (4-12 h), type of base (NaOH/KOH) and amount of carbon disulfide (2-10%v/v). Xanthated alginates were analyzed by NMR techniques and evidence of β-elimination was detected at 5.45 ppm. Furthermore, the presence of S element was confirmed by EDS mapping technique, while XRD showed a semi-crystalline structure. On the other hand, the chemical shifts of δ(C=S) and ν(C=S) bands were found around 863-805 cm^-1 and 662-602 cm^-1 respectively. Also, a shoulder at 182 ppm is appreciated by NMR in solid state attributed to CS group. According to FESEM analyses, morphology of xanthated alginates is affected by interaction with heavy metal ions. Finally, suitable materials for the removal of heavy metal ions were established at optimum pH values.

Sustainable dialdehyde polysaccharides as versatile building blocks for fabricating functional materials: An overview

Dialdehyde polysaccharide (DAP), containing multiple aldehyde groups, can react with materials having amino groups via Schiff base crosslinking. Besides, it can also react with materials having carbonyl/hydroxyl groups via aldol reactions. Based on these intriguing properties, DAPs can be employed as versatile building blocks to fabricate functional materials used in biomedical field, wastewater treatment, leather manufacture, and electrochemistry field. This review aims to provide an overview of the recent advances in fabricating biomaterials, adsorbents, leather tanning agents, and electrochemical materials based on DAPs. The basic fabricating strategy and principle of these materials and their performances are overall summarized, along with a discussion of associated scalability challenges, technological strategies to overcome them, and the prospect for commercial translations of this versatile material. Blending the versatility of DAP with material science and technological advances can provide a powerful tool to develop more DAP-based functional materials in a scalable way.

Ultrasound assisted preparation of calcium alginate beads to improve absorption of Pb+2 from water

Calcium alginate (CaAlg) beads were prepared using ultrasound for use in the removal of lead from natural and wastewaters by ion exchange. Ultrasound was applied in a batch mode with an ultrasonic bath or in a flow mode using an ultrasonic clamp-on device. For comparison purposes the synthesis was performed in batch mode in the absence of the ultrasound. The beads prepared using ultrasound showed a greater ion exchange capability which could be ascribed to a larger specific surface area as a result of surface roughening induced by cavitation. Scanning Electron Microscopy (SEM) images revealed that the roughening was in the form of corrugation for the product with the best ion exchange capability obtained in the flow process where preformed CaAlg droplets were subjected to ultrasound during the setting process. These beads performed 11% better for lead removal than those synthesized in the absence of ultrasound.

In-situ crosslinked hydrogel based on amidated pectin/oxidized chitosan as potential wound dressing for skin repairing

Hydrogel can provide a favorable moisture environment for skin wound healing. In this study, a novel in-situ crosslinked injectable hydrogel was prepared using the water-soluble amidated pectin (AP) and oxidized chitosan (OC) through Schiff-base reaction without any chemical crosslinker. The influence of AP content on the properties of the hydrogel was systemically investigated. It showed that gelation time, pore structure, swelling capability and degradability of the hydrogel can be tuned by varying the content of amine and aldehyde groups from AP and OC. All the porous hydrogels with various AP contents (65%, 70%, and 80%) presented desirable gelation time, swelling property, high hemocompatibility and biocompatibility. Particularly, AP-OC-65 hydrogel presented superior swelling capability and better hemo- and bio-compatibility, owing to more residual amine sites in the hydrogel. Therefore, the injectable AP-OC-65 hydrogel has a greater potential for application to wound dressing or skin substitute.

Strategies to Functionalize the Anionic Biopolymer Na-Alginate without Restricting Its Polyelectrolyte Properties

The natural anionic polyelectrolyte alginate and its derivatives are of particular interest for pharmaceutical and biomedical applications. Most interesting for such applications are alginate hydrogels, which can be processed into various shapes, self-standing or at surfaces. Increasing efforts are underway to functionalize the alginate macromolecules prior to hydrogel formation in order to overcome the shortcomings of purely ionically cross-linked alginate hydrogels that are hindering the progress of several sophisticated biomedical applications. Particularly promising are derivatives of alginate, which allow simultaneous ionic and covalent cross-linking to improve the physical properties and add biological activity to the hydrogel. This review will report recent progress in alginate modification and functionalization with special focus on synthesis procedures, which completely conserve the ionic functionality of the carboxyl groups along the backbone. Recent advances in analytical techniques and instrumentation supported the goal-directed modification and functionalization.

TV, Huamani-Palomino RG, Baena-Moncada AM. Simultaneous adsorption of a ternary mixture of brilliant green, rhodamine B and methyl orange as artificial wastewater onto biochar from cocoa pod husk waste. Quantification of dyes using the derivative spectrophotometry method

Biochar obtained from cocoa pod husk waste for the simultaneous adsorption of a ternary mixture of brilliant green, rhodamine B and methyl orange.

Dithiocarbamate-modified cellulose-based sorbents with high storage stability for selective removal of arsenite and hazardous heavy metals

A series of cellulose derivatives bearing dialkyl dithiocarbamate (DTC) groups were synthesized. Their ability of sorption of arsenite (As(iii)) and heavy metals and their storage stability in the solid state were investigated. Among them, DTC-modified cellulose derived from l-proline showed the highest sorption capacity for As(iii) and heavy metals to selectively remove them from aqueous media. It also showed exellent storage stability in air at 40 °C.

Dithiocarbamate-modified cellulose derived from l-proline works as a storable sorbent for selective removal of toxic As(iii) and heavy metals from aqueous media.

Adsorption of Cr(III) and Pb(II) by graphene oxide/alginate hydrogel membrane: Characterization, adsorption kinetics, isotherm and thermodynamics studies

Graphene oxide/alginate hydrogel membranes (GAHMs) were prepared by cross-linking a casting solution (blending graphene oxide, sodium alginate and urea) with a calcium chloride solution. The adsorption performance and mechanism for the removel of Cr(III) and Pb(II) were investigated. The GAHMs, before and after adsorption, were characterized by FT-IR, SEM, EDX and XPS, and their hydrophilicity was determined. The kinetics, isotherm and thermodynamics models were introduced. Results indicated that the optimal pH for the membranes removing Cr(III) and Pb(II) was 6.0 and 5.0 respectively. The adsorption capacity for both metal ions was positively correlated with the initial concentration and contact time and their adsorption was consistent with the pseudo-second-order kinetic model. The Langmuir isotherm better described the adsorption equilibrium. Moreover, the Langmuir model showed that the maximum adsorption capacity for Pb(II) was better than that for Cr(III) (327.9 and 118.6 mg/g, respectively). Thermodynamics analysis showed that the adsorption for Cr(III) by GAHMs was endothermic, whereas that of Pb(II) was exothermic. After five adsorption-desorption cycles, a high adsorption efficiency for both metal ions was maintained. This novel membrane material (GAHMs) is potentially an effective membrane adsorbent for the removal of Cr(III) and Pb(II) ions in practical applications.