One-pot synthesis of gold nanoparticles embedded in polysaccharide-based hydrogel: Physical-chemical characterization and feasibility for large-scale production

Recent advances in nanoantibiotics against multidrug-resistant bacteria

Multidrug-resistant (MDR) bacteria-caused infections have been a major threat to human health. The abuse of conventional antibiotics accelerates the generation of MDR bacteria and makes the situation worse. The emergence of nanomaterials holds great promise for solving this tricky problem due to their multiple antibacterial mechanisms, tunable antibacterial spectra, and low probabilities of inducing drug resistance. In this review, we summarize the mechanism of the generation of drug resistance, and introduce the recently developed nanomaterials for dealing with MDR bacteria via various antibacterial mechanisms. Considering that biosafety and mass production are the major bottlenecks hurdling the commercialization of nanoantibiotics, we introduce the related development in these two aspects. We discuss urgent challenges in this field and future perspectives to promote the development and translation of nanoantibiotics as alternatives against MDR pathogens to traditional antibiotics-based approaches.

Construction, characterization and application of locust bean gum/Phyllanthus reticulatus anthocyanin - based plasmonic silver nanocomposite for sensitive detection of ferrous ions

Iron is a transition metal of tremendous eco-physiological significance. This work aimed at constructing a simple plasmonic Ag-nanocomposite (LBG/PRAg-NC) based on locust bean gum and Phyllanthus reticulatus anthocyanin in a sustainable manner for the optical detection of ferrous ions (Fe²⁺) in aqueous solution. LBG/PRAg-NC was prepared via a green chemistry route and thoroughly characterized for its physico-chemical and plasmonic attributes. Successful synthesis of LBG/PRAg-NC under room temperature with Phyllanthus reticulatus anthocyanin as reductant and locust bean gum as stabilizer was accomplished within 15 min. LBG/PRAg-NC exhibited small size (∼8.04 nm), spherically shaped nanosilver, with good colloidal dispersion, stability and prominent SPR absorption peak at 420 nm. XPS analysis revealed the existence of both Ag⁰ and Ag ⁺ species embedded in the biopolymer support. Furthermore, LBG/PRAg-NC was highly selective for Fe²⁺ as opposed to other interferents including Fe³⁺. The presence of Fe²⁺ engendered a redox oxidation of the analyte by the Ag⁺ species, prompting a rapid, concentration dependent increase in color and SPR absorption band intensity of LBG/PRAg-NC colloidal solution. In aqueous solution, the probe displayed a good linear range for Fe²⁺ (0.1-100 μM), and a low detection limit (LOD of 0.38 μM). The obtained detection limit is much lower than the guideline limit of Fe²⁺ content in drinking water, ∼5 μM. Additionally, the probe was successfully applied in determination of Fe²⁺ in aqueous solutions of apple juice, iron supplement tablet, and tap water, with commendable analytical performances. Therefore, our research findings demonstrate a facile, efficacious, cost-effective, and eco-friendly approach for the sustainable synthesis of plasmonic Ag-nanocomposites based solely on locust bean gum and Phyllanthus reticulatus anthocyanin. Importantly, these results validate the capacity of plasmonic Ag-nanocomposite constructed via green chemistry route as a simple, rapid, and selective probe for effective monitoring of trace amounts of Fe²⁺ in aqueous environment.

The use of natural gums to produce nano-based hydrogels and films for topical application

Natural gums are a source of biopolymeric materials with a wide range of applications for multiple purposes. These polysaccharides are extensively explored due to their low toxicity, gelling and thickening properties, and bioadhesive potential, which have sparked interest in researchers given their use in producing pharmaceutic dosage forms compared to synthetic agents. Hence, gums can be used as gelling and film-forming agents, which are suitable platforms for topical drug administration. Additionally, recent studies have demonstrated the possibility of obtaining nanocomposite materials formed by a polymeric matrix of gums associated with nanoscale carriers that have shown superior drug delivery performance and compatibility with multiple administration routes compared to starting components. In this sense, research on topical natural gum-based form preparation containing drug-loaded nanocarriers was detailed and discussed herein. A special focus was devoted to the advantages achieved regarding physicochemical and mechanical features, drug delivery capacity, permeability through topical barriers, and biocompatibility of the hydrogels and polymeric films.

Polysaccharides and Metal Nanoparticles for Functional Textiles: A Review

Nanotechnology is a powerful tool for engineering functional materials that has the potential to transform textiles into high-performance, value-added products. In recent years, there has been considerable interest in the development of functional textiles using metal nanoparticles (MNPs). The incorporation of MNPs in textiles allows for the obtention of multifunctional properties, such as ultraviolet (UV) protection, self-cleaning, and electrical conductivity, as well as antimicrobial, antistatic, antiwrinkle, and flame retardant properties, without compromising the inherent characteristics of the textile. Environmental sustainability is also one of the main motivations in development and innovation in the textile industry. Thus, the synthesis of MNPs using ecofriendly sources, such as polysaccharides, is of high importance. The main functions of polysaccharides in these processes are the reduction and stabilization of MNPs, as well as the adhesion of MNPs onto fabrics. This review covers the major research attempts to obtain textiles with different functional properties using polysaccharides and MNPs. The main polysaccharides reported include chitosan, alginate, starch, cyclodextrins, and cellulose, with silver, zinc, copper, and titanium being the most explored MNPs. The potential applications of these functionalized textiles are also reported, and they include healthcare (wound dressing, drug release), protection (antimicrobial activity, UV protection, flame retardant), and environmental remediation (catalysts).

Stability and surface properties of selenium nanoparticles coated with chitosan and sodium carboxymethyl cellulose

The effect of polysaccharide coatings on the stability and release characteristics of selenium nanoparticles (SeNPs) was evaluated by comparing the characteristics of chitosan-coated SeNPs (CS-SeNPs) and sodium carboxymethyl cellulose-coated SeNPs (CMC-SeNPs). The release characteristics of SeNPs were investigated in storage conditions, gastrointestinal conditions, and free radical systems. CMC-SeNPs formed dimers or trimers, whereas CS-SeNPs were monodispersed but formed large aggregates in a pH range of 7.4-8.25. Upon 50 days of storage at 30 °C, both CMC-SeNPs and CS-SeNPs were converted to Se⁴⁺. SeNPs exhibited a lower release rate in simulated gastrointestinal conditions than in free radical systems. SeNPs release in ABTS and superoxide anion free radical systems followed the first-order and Korsmeyer-Peppas models, respectively, indicating that SeNP release is mainly governed by dissolution mechanisms. Additional studies are needed to examine the potential environmental effects and biological activity of the Se⁴⁺ released from SeNPs.

Gellan hydrogel-template synthesis of Au/MnO2 with enhanced photothermal conversion performance for localized cancer therapy

A Au/MnO2@GG nanocomposite hydrogel is in situ synthesized in a gellan matrix showing NIR-triggered hyperthermia with high photothermal conversion efficiency for antitumor applications.

A novel Ag/carrageenan-gelatin hybrid hydrogel nanocomposite and its biological applications: Preparation and characterization

A novel biohybrid hydrogel nanocomposite made of natural polymer carrageenan and gelatin protein were developed. The silver nanoparticles were prepared using the carrageenan polymer as reduction and capping agent. Here, the Ag/Carrageenan was combined with gelatin hydrogel using glutaraldehyde having a cross-link role in order to create the biohybrid hydrogel nanocomposite. The manufactured composite performances were anaylised by UV-visible spectroscopy, Fourier Transform infrared (FTIR) spectroscopy, Scanning Electron Microscopy (SEM), Energy dispersive X-ray (EDX) spectroscopy and Transmission Electron Microscopy (TEM) methods. The swelling behaviour of the Ag/Carrageenan-gelatin hybrid hydrogel nanocomposite was also analyzed. The antibacterial activity was tested against human pathogens viz. S.agalactiae 1661, S. pyogenes 1210 and E. coli. The bacterial cell wall damage of S.agalactiae 1661 was analyzed by scanning electron microscopy. The cytotoxic assay was performed against the A549 lung cancer cells.

Polymer-based wafers containing in situ synthesized gold nanoparticles as a potential wound-dressing material

Polymer-based wafers containing gold nanoparticles (AuNP) were prepared using κ-carrageenan (κC), locust bean gum (LBG) and polyvinyl alcohol (PVA) at ratios of 42/22/13% ^w/_w and 35/15/17% ^w/_w. The synthesized AuNPs were evaluated for their particle size and morphology. The produced wafers containing AuNPs were investigated for their physicochemical, morphological, mechanical, and swelling properties. In addition, bacterial barrier activity and in vitro cytotoxicity were also evaluated in this study. The AuNPs obtained were spherical in shape (~ 10-15 nm in diameter) and exhibited a single bell-shaped UV-vis absorption band centered ~ 540 nm. FT-IR spectra of the wafers containing AuNPs exhibited a shift of ν(O=S=O) absorption band toward a lower wavenumber and a shift of ν(OH) absorption band toward a higher wavenumber due to the coordination of OH groups to AuNPs and their interaction with O=S=O groups of κC, respectively. SEM images confirmed the porous structure of the produced wafers, being the surface area, mechanical properties, and swelling behavior directly affected by changing both the initial amount of [Au⁺³] and the composition of the wafers. Lastly, the produced wafers showed non-toxicity to NIH-3T3 fibroblast cells, and they also serve as a bacterial barrier. These findings endorsed the claim that the produced wafers containing AuNPs could be a promising material for wound dressing applications.

Poly(hydroxybutyrate-co-hydroxyvalerate) microparticles embedded in κ-carrageenan/locust bean gum hydrogel as a dual drug delivery carrier

A novel composite hydrogel was prepared as a dual drug delivery carrier. Poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) microparticles were prepared to encapsulate simultaneously ketoprofen and mupirocin, as hydrophobic drug models. These microparticles were embedded in a physically crosslinked hydrogel of κ-carrageenan/locust bean gum. This composite hydrogel showed for both drugs a slower release than the obtained release from microparticles and hydrogel separately. The release of both drugs was observed during a period of 7 days at 37 °C. Different kinetic models were analyzed and the results indicated the best fitting to a Higuchi model suggesting that the release was mostly controlled by diffusion. Also, the drug loaded microparticles were spherical with average mean particle size of 1.0 μm, mesoporous, and distributed homogeneously in the hydrogel. The composite hydrogel showed a thermosensitive swelling behavior reaching 183% of swelling ratio at 37 °C. The composite hydrogel showed the elastic component to be higher than the viscous component, indicating characteristics of a strong hydrogel. The biocompatibility was evaluated with in vitro cytotoxicity assays and the results indicated that this composite hydrogel could be considered as a potential biomaterial for dual drug delivery, mainly for wound healing applications.