Improved features of a highly stable protease from Penaeus vannamei by immobilization on glutaraldehyde activated graphene oxide nanosheets

Effect of different thermal processing methods on sensory, nutritional, physicochemical and structural properties of Penaeus vannamei

The aim of this study was to investigate the effect of different thermal processing methods on the nutritional and physicochemical qualities of Penaeus vannamei. Three different thermal processing methods, namely, drying (DS, 120 °C/40 min), steaming (SS, 100 °C/2 min), and microwaving (MS, 600 W/2 min) were used to treat the shrimps. Low-field nuclear magnetic resonance data indicated that fixed water was the main component of Penaeus vannamei. The ratio of fatty acids in MS and DS samples was more in line with the FAO/WHO recommended health requirements; The myofibrillar protein carbonyl group increased, whereas sulfhydryl content decreased after thermal processing, indicating that the proteins were oxidized by thermal processing. The magnitude of oxidation is: MS > SS > DS. Different thermal processing methods can exert great influence on color texture and nutrition to Penaeus vannamei, which can provide a theoretical knowledge for consumers to choose the appropriate processing method.

Whether membranes developed for organic solvent nanofiltration (OSN) tend to be hydrophilic or hydrophobic? ── a review

In the past few decades, organic solvent nanofiltration (OSN) has attracted numerous researchers and broadly applied in various fields. Unlike conventional nanofiltration, OSN always faced a broad spectrum of solvents including polar solvents and non-polar solvents. Among those recently developed OSN membranes in lab-scale or widely used commercial membranes, researchers preferred to explore intrinsic materials or introduce nanomaterials into membranes to fabricate OSN membranes. However, the hydrophilicity of the membrane surface towards filtration performance was often ignored, which was the key factor in conventional aqueous nanofiltration. The influence of surface hydrophilicity on OSN performance was not studied systematically and thoroughly. Generally speaking, the hydrophilic OSN membranes performed well in the polar solvents while the hydrophobic OSN membranes work well in the non-polar solvent. Many review papers reviewed the basics, problems of the membranes, up-to-date studies, and applications at various levels. In this review, we have focused on the relationship between the surface hydrophilicity of OSN membranes and OSN performances. The history, theory, and mechanism of the OSN process were first recapped, followed by summarizing representative OSN research classified by surface hydrophilicity and types of membrane, which recent OSN research with its contact angles and filtration performance were listed. Finally, from the industrialization perspective, the application progress of hydrophilic and hydrophobic OSN membranes was introduced. We started with history and theory, presented many research and application cases of hydrophilic and hydrophobic OSN membranes, and discussed anticipated progress in the OSN field. Also, we pointed out some future research directions on the hydrophilicity of OSN membranes to deeply develop the effect made by membrane hydrophilicity on OSN performance for future considerations and stepping forward of the OSN industry.

Proteases immobilized on nanomaterials for biocatalytic, environmental and biomedical applications: Advantages and drawbacks

Proteases have gained significant scientific and industrial interest due to their unique biocatalytic characteristics and broad-spectrum applications in different industries. The development of robust nanobiocatalytic systems by attaching proteases onto various nanostructured materials as fascinating and novel nanocarriers has demonstrated exceptional biocatalytic performance, substantial stability, and ease of recyclability over multiple reaction cycles under different chemical and physical conditions. Proteases immobilized on nanocarriers may be much more resistant to denaturation caused by extreme temperatures or pH values, detergents, organic solvents, and other protein denaturants than free enzymes. Immobilized proteases may present a lower inhibition. The use of non-porous materials in the immobilization prevents diffusion and steric hindrances during the binding of the substrate to the active sites of enzymes compared to immobilization onto porous materials; when using very large or solid substrates, orientation of the enzyme must always be adequate. The advantages and problems of the immobilization of proteases on nanoparticles are discussed in this review. The continuous and batch reactor operations of nanocarrier-immobilized proteases have been successfully investigated for a variety of applications in the leather, detergent, biomedical, food, and pharmaceutical industries. Information about immobilized proteases on various nanocarriers and nanomaterials has been systematically compiled here. Furthermore, different industrial applications of immobilized proteases have also been highlighted in this review.

Dissecting dual specificity: Identifying key residues in L-asparaginase for enhanced acute lymphoid leukemia therapy and reduced adverse effects

L-asparaginase from Escherichia coli (EcA) has been used for the treatment of acute lymphoid leukemia (ALL) since the 1970s. Nevertheless, the enzyme has a second specificity that results in glutaminase breakdown, resulting in depletion from the patient's body, causing severe adverse effects. Despite the huge interest in the use of this enzyme, the exact process of glutamine depletion is still unknown and there is no consensus regarding L-asparagine hydrolysis. Here, we investigate the role of T12, Y25, and T89 in asparaginase and glutaminase activities. We obtained individual clones containing mutations in the T12, Y25 or T89 residues. After the recombinant production of wild-type and mutated EcA, The purified samples were subjected to structural analysis using Nano Differential Scanning Fluorimetry, which revealed that all samples contained thermostable molecules in their active structural conformation, the homotetramer conformation. The quaternary conformation was confirmed by DLS and SEC. The activity enzymatic assay combined with molecular dynamics simulation identified the contribution of T12, Y25, and T89 residues in EcA glutaminase and asparaginase activities. Our results mapped the enzymatic behavior paving the way for the designing of improved EcA enzymes, which is important in the treatment of ALL.

Three anthocyanin-rich berry extracts regulate the in vitro digestibility of corn starch: Physicochemical properties, structure and α-amylase

This study aimed to compare the regulatory effects of blue honeysuckle anthocyanins (BHA), blueberry anthocyanins (BBA), and blackcurrant anthocyanins (BCA) on the in vitro digestibility of corn starch in terms of starch physicochemical properties and structure, as well as α-amylase inhibition. The results revealed that adding all three anthocyanins lowered digestibility in the following order: BHA > BCA > BBA. The terminal digestibility (C∞) decreased from 73.84 % to 57.3 % with the addition of 10 % BHA, while the resistant starch (RS) content increased from 4.39 % to 48.82 %. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis indicated that anthocyanins and starch interacted through noncovalent bonds. Differential scanning calorimetry (DSC) analysis showed that the gelatinization enthalpy was dramatically lowered in all three anthocyanin groups, with 10 % BHA producing a 38.58 % drop. Rheological property analysis showed that anthocyanins increased the apparent viscosity and modulus with starch. The interaction between anthocyanin and α-amylase was mainly through the formation of hydrogen bonds and hydrophobic forces. This research provides theoretical guidance for developing low glycemic index (GI) anthocyanin starch-based foods.

Rational design of biocatalysts based on covalent immobilization of acylase enzymes

Acylases catalyze the hydrolysis of amide bonds. Penicillin G acylase (PGA) is used for the semi-synthesis of penicillins and cephalosporins. Although protein immobilization increases enzyme stability, the design of immobilized systems is difficult and usually it is empirically performed. We describe a novel application of our strategy for the Rational Design of Immobilized Derivatives (RDID) to produce optimized acylase-based immobilized biocatalysts for enzymatic bioconversion. We studied the covalent immobilization of the porcine kidney aminoacylase-1 onto aldehyde-based supports. Predictions of the RDID1.0 software and the experimental results led to the selection of glyoxyl-Sepharose CL 4B support and pH 10.0. One of the predicted clusters of reactive amino groups generates an enzyme-support configuration with highly accessible active sites, contributing with 82% of the biocatalyst's total activity. For Escherichia coli PGA, the predictions and experimental results show similar maximal amounts of immobilized protein and activity at pH 8.0 and 10.0 on glyoxyl-Sepharose CL 10B. However, thermal stability of the immobilized derivative is higher at pH 10.0 due to an elevated probability of multipoint covalent attachment. In this case, two clusters of amino groups are predicted to be relevant for PGA immobilization in catalytically competent configurations at pH 10.0, showing accessible active sites and contributing with 36% and 44% of the total activity, respectively. Our results support the usefulness of the RDID strategy to model different protein engineering approaches (site-directed mutagenesis or obtainment of fusion proteins) and select the most promising ones, saving time and laboratory work, since the in silico-designed modified proteins could have higher probabilities of success on bioconversion processes.

Analytical expression for the model that describes the heterogeneous reaction-diffusion process with immobilized enzyme (penicillin G acylase)

This research article examines the reaction-diffusion process in an immobilized enzyme batch reactor. The model incorporates strongly non-linear factors that are associated with standard Michaelis-Menten kinetics. The non-linear reaction-diffusion equations for substrate and product concentrations have been approximated analytically. Employing two different semi-analytical methods, Akbari-Ganji's method (AGM) and the modified Adomian decomposition method (MADM), to compute the dimensionless steady-state solutions to the system of non-linear differential equations for all values of reaction parameters. In addition, the dynamics of the mean integrated effectiveness factor of penicillin acylase in porous spherical particles have been presented for the determination of the local effectiveness factor. In order to gauge the potency of our proposed solution, we compare two semi-analytical results with a numerical result that are in good agreement across the whole concentration range. The proposed formulation aims to simulate the dynamic performance of the system utilizing the parameters and would enhance the determination of the optimum particle size for enzyme catalysts.

Compound effect and mechanism of oxidative damage induced by nanoplastics and benzo [a] pyrene

Nanoplastics and polycyclic aromatic hydrocarbons (PAHs) are ubiquitous in soil environments. In order to objectively evaluate the toxic interaction between polystyrene nanoplastics (PS NPs) and benzo [a] pyrene (BaP), oxidative damage at the level of earthworm cells and biomacromolecules was investigated by experiments combined with molecular dynamics simulation. Studies on cells reveal that PS NPs and BaP had synergistic toxicity when it came to causing oxidative stress. Cellular reactive oxygen species (ROS) levels under combined pollutant exposure were 24% and 19% higher, respectively than when PS NPs and BaP were exposed alone (compared to the blank group). In addition, BaP and PS NPs inhibited the ability of CAT to decompose H2O2 by affecting the structure of the proximal amino acid Tyr 357 in the active center of CAT, which exacerbated oxidative stress to a certain extent. Therefore, the synergistic toxic effect of BaP and PS NPs is due to the mutual complement of the two to the induction of protein structural looseness, and the strengthening of the stability of the conjugate (CAT-BaP-PS) under the weak interaction. This work provides a new perspective and approach on how to talk about the toxicity of combined pollutants.

An insight into microbial sources, classification, and industrial applications of xylanases: A rapid review

Endo 1,4-β-d-xylanases (EC3.2.1.8) are one of the key lignocellulose hydrolyzing enzymes. Xylan, which is present in copious amounts on earth, forms the primary substrate of endo-xylanases, which can unchain the constituent monosaccharides linked via β-1,4-glycosidic bonds from the xylan backbone. Researchers have shown keen interest in the xylanases belonging to glycoside hydrolase families 10 and 11, whereas those placed in other glycoside hydrolase families are yet to be investigated. Various microbes such as bacteria and fungi harbor these enzymes for the metabolism of their lignocellulose fibers. These microbes can be used as miniature biofactories of xylanase enzymes for a plethora of environmentally benign applications in pulp and paper industry, biofuel production, and for improving the quality of food in bread baking and fruit juice industry. This review highlights the potential of microbes in production of xylanase for industrial biotechnology.

Future carbon storages of ecosystem based on land use change and carbon sequestration practices in a large economic belt

Assessments of ecosystem carbon storage are needed to form the scientific basis for carbon policies. Due to lack of data, there are few accurate, large-scale, and long-term predictions of ecosystem carbon storage. This study used the Distributed Land-Use Change Prediction (DLUCP) model with ten socioeconomic and two climate change scenarios for a total of 20 combinations that take into account population increase, technology innovation, climate change, and Grain for Green Project to make high-resolution predictions of land use change in the Yangtze River Economic Belt. Low and high carbon sequestration practices were considered to predict future carbon densities. Land use change data, carbon densities data, and the InVEST model were used to predict changes in ecosystem carbon storage from now to 2070. The results show a slight increase (1.88-4.17%) in carbon storage in the study area only based on land use change. Grain for Green Project has the largest impact on carbon storage among population increase, technology innovation, climate scenarios, and Grain for Green Project, which increases carbon storage by 4.17%. After the implementation of carbon sequestration practices, there is an increase in carbon storages from 28.51 to 56.77% in the study area from now to 2070, and increasing carbon storages of forest in each stream and carbon storage of cropland in downstream are efficient ways to achieve carbon neutralization.

Marine enzymes: Classification and application in various industries

Oceans are regarded as a plentiful and sustainable source of biological compounds. Enzymes are a group of marine biomaterials that have recently drawn more attention because they are produced in harsh environmental conditions such as high salinity, extensive pH, a wide temperature range, and high pressure. Hence, marine-derived enzymes are capable of exhibiting remarkable properties due to their unique composition. In this review, we overviewed and discussed characteristics of marine enzymes as well as the sources of marine enzymes, ranging from primitive organisms to vertebrates, and presented the importance, advantages, and challenges of using marine enzymes with a summary of their applications in a variety of industries. Current biotechnological advancements need the study of novel marine enzymes that could be applied in a variety of ways. Resources of marine enzyme can benefit greatly for biotechnological applications duo to their biocompatible, ecofriendly and high effectiveness. It is beneficial to use the unique characteristics offered by marine enzymes to either develop new processes and products or improve existing ones. As a result, marine-derived enzymes have promising potential and are an excellent candidate for a variety of biotechnology applications and a future rise in the use of marine enzymes is to be anticipated.

Protist–Lactic Acid Bacteria Co-Culture as a Strategy to Bioaccumulate Polyunsaturated Fatty Acids in the Protist Aurantiochytrium sp. T66

Thraustochytrids are aquatic unicellular protists organisms that represent an important reservoir of a wide range of bioactive compounds, such as essential polyunsaturated fatty acids (PUFAs) such as arachidonic acid (ARA), docosahexaenoic acid (DHA), eicosapentaenoic acid (EPA), which are involved in the regulation of the immune system. In this study, we explore the use of co-cultures of Aurantiochytrium sp. and bacteria as a biotechnological tool capable of stimulating PUFA bioaccumulation. In particular, the co-culture of lactic acid bacteria and the protist Aurantiochytrium sp. T66 induce PUFA bioaccumulation, and the lipid profile was evaluated in cultures at different inoculation times, with two different strains of lactic acid bacteria capable of producing the tryptophan dependent auxins, and one strain of Azospirillum sp., as a reference for auxin production. Our results showed that the Lentilactobacillus kefiri K6.10 strain inoculated at 72 h gives the best PUFA content (30.89 mg g−1 biomass) measured at 144 h of culture, three times higher than the control (8.87 mg g−1 biomass). Co-culture can lead to the generation of complex biomasses with higher added value for developing aquafeed supplements.

Enzyme Immobilization Technologies and Industrial Applications

Enzymes play vital roles in diverse industrial sectors and are essential components of many industrial products. Immobilized enzymes possess higher resistance to environmental changes and can be recovered/recycled easily when compared to the free forms. The primary benefit of immobilization is protecting the enzymes from the harsh environmental conditions (e.g., elevated temperatures, extreme pH values, etc.). The immobilized enzymes can be utilized in various large-scale industries, e.g., medical, food, detergent, textile, and pharmaceutical industries, besides being used in water treatment plants. According to the required application, a suitable enzyme immobilization technique and suitable carrier materials are chosen. Enzyme immobilization techniques involve covalent binding, encapsulation, entrapment, adsorption, etc. This review mainly covers enzyme immobilization by various techniques and their usage in different industrial applications starting from 1992 until 2022. It also focuses on the multiscale operation of immobilized enzymes to maximize yields of certain products. Lastly, the severe consequence of the COVID-19 pandemic on global enzyme production is briefly discussed.

A Novel, Highly Potent NADPH-Dependent Cytochrome P450 Reductase from Waste Liza klunzingeri Liver

The use of marine enzymes as catalysts for biotechnological applications is a topical subject. Marine enzymes usually display better operational properties than their animal, plant or bacterial counterparts, enlarging the range of possible biotechnological applications. Due to the fact that cytochrome P450 enzymes can degrade many different toxic environmental compounds, these enzymes have emerged as valuable tools in bioremediation processes. The present work describes the isolation, purification and biochemical characterization of a liver NADPH-dependent cytochrome P450 reductase (CPR) from the marine fish Liza klunzingeri (LkCPR). Experimental results revealed that LkCPR is a monomer of approximately 75 kDa that is active in a wide range of pH values (6-9) and temperatures (40-60 °C), showing the highest catalytic activity at pH 8 and 50 °C. The activation energy of the enzyme reaction was 16.3 kcal mol^-1 K^-1. The K_M values for cytochrome C and NADPH were 8.83 μM and 7.26 μM, and the k_cat values were 206.79 s^-1 and 202.93 s^-1, respectively. LkCPR displayed a specific activity versus cytochrome C of 402.07 µmol min^-1 mg¹, the highest activity value described for a CPR up to date (3.2-4.7 times higher than the most active reported CPRs) and showed the highest thermostability described for a CPR. Taking into account all these remarkable catalytic features, LkCPR offers great potential to be used as a suitable biocatalyst.

Biotechnological application of Aspergillus oryzae β-galactosidase immobilized on glutaraldehyde modified zinc oxide nanoparticles

The current research demonstrates the synthesis of zinc oxide nanoparticles (ZnO-NPs) via green nanotechnology approach (Azatirachta indica leaves). The size of the synthesized ZnO-NPs was confirmed as 27 nm by TEM. Glutaraldehyde was used to modify the surface of the developed ZnO-NPs in order to promote covalent binding of Aspergillus oryzae β-galactosidase. Enzyme activity was achieved as 93% on glutaraldehyde modified ZnO-NPs. The immobilized enzyme exhibited significant enhancement in activity under extreme temperature and pH variations, as compared to the soluble β-galactosidase (SβG). It was further observed that the immobilized enzyme retained 58% activity at 5% galactose concentration. However, under similar experimental conditions, SβG showed 27% activity. Reusability of immobilized enzyme revealed that it retained 89% activity even after fifth repeated use, and hence could be recovered easily by centrifugation for repeated use in biotechnological applications. Batch reactor experiment indicates that the immobilized enzyme displayed 81% and 70% lactose hydrolysis at 50 °C and 60 °C, respectively as compared to 70% and 58% lactose hydrolysis by soluble enzyme under identical conditions after 9 h.

β-Glucosidase Immobilized on Magnetic Nanoparticles: Controlling Biomolecule Footprint and Particle Functional Group Density to Navigate the Activity-Stability Tradeoff

In the present work, the immobilized footprint of β-glucosidase (BGL) on silica-coated iron oxide was explored to produce reusable catalysts with flexible active sites for high activity and heightened storage stability. Synthesized iron oxide particles were coated with silica and functionalized with various densities of (3-aminopropyl)triethoxysilane (APTES) to obtain particles with amine densities ranging from 0 to 3 × 10^-5 mol/g particle. The amine-modified particles were activated with glutaraldehyde, and subsequently, BGL was immobilized using either a 0.1 or 1 mg/mL enzyme solution to produce biomolecules with a large or small footprint on the particle surface. The initial activity, activity for subsequent hydrolysis cycles, activity after extended storage, and biomolecule footprint were studied as a function of APTES density and concentration of enzyme used for immobilization. At high immobilization amounts, the specific activity and footprint were reduced, but the immobilized biomolecules were stable during storage. However, at low enzyme immobilizations, the activity of the enzymes was retained, the immobilized enzymes adopted large footprints, and the storage stability increased with APTES density relative to the free enzyme. These results highlight how controlling both the protein load and functional group density can yield immobilized enzymes possessing high activity, which are stable during storage.

Metabolite Profiling of Microwave-Assisted Sargassum fusiforme Extracts with Improved Antioxidant Activity Using Hybrid Response Surface Methodology and Artificial Neural Networking-Genetic Algorithm

Sargassum fusiforme (SF) is a popular edible brown macroalga found in Korea, Japan, and China and is known for its health-promoting properties. In this study, we used two sophisticated models to obtain optimized conditions for high antioxidant activity and metabolite profiling using high-resolution mass spectrometry. A four-factor central composite design was used to optimize the microwave-assisted extraction and achieve the maximum antioxidant activities of DPPH (Y1: 28.01 % inhibition), ABTS (Y2: 36.07 % inhibition), TPC (Y3: 43.65 mg GAE/g), and TFC (Y4: 17.67 mg CAE/g), which were achieved under the optimized extraction conditions of X1: 47.67 %, X2: 2.96 min, X3: 139.54 °C, and X4: 600.00 W. Moreover, over 79 secondary metabolites were tentatively identified, of which 12 compounds were reported for the first time in SF, including five phenolic (isopropyl 3-(3,4-dihydroxyphenyl)-2-hydroxypropanoate, 3,4-dihydroxyphenylglycol, scopoletin, caffeic acid 4-sulfate, and cinnamoyl glucose), two flavonoids (4',7-dihydroxyisoflavone and naringenin), three phlorotannins (diphlorethohydroxycarmalol, dibenzodioxin-1,3,6,8-tetraol, and fucophlorethol), and two other compounds (dihydroxyphenylalanine and 5-hydroxybenzofuran-2(3H)-one) being identified for the first time in optimized SF extract. These compounds may also be involved in improving the antioxidant potential of the extract. Therefore, optimized models can provide better estimates and predictive capabilities that would assist in finding new bioactive compounds with improved biological activities that can be further applied at a commercial level.

In Vitro Effect on the Proteolytic Activity of Papain with Proteins of the Skin as Substrate

OBJECTIVE

This work aims to evaluate the effects of enzyme concentration, pH, temperature, and time course degree of hydrolysis (DH) of papain regarding further development of pharmaceutical and cosmetic formulations.

METHODS

The hydrolysis of casein, collagen, keratin, and porcine skin at pH and temperature ranges of the human skin was evaluated. Also, low contact times of enzyme-substrate were studied. The incorporation of 3 mM of cysteine improved the caseinolytic (PU), collagenolytic (CU), and keratinolytic (KU) activities of papain.

RESULTS

In general, the increase from 0.1 to 1.0 or 2.0 mg mL^-1 of papain improved PU, CU, and KU. When 2.0 mg mL^-1 of papain was used, the highest DH of casein, collagen, and keratin were obtained at 240 min (14, 35, and 6%, respectively). The decrease in pH and temperature reduced all proteolytic activities, but papain maintained at least 50 and 40% of its activity at 26 °C and pH 4.5, respectively. Scanning electron micrographs of the surface of the skin showed that papain application had exfoliating activity.

CONCLUSION

This pre-formulation study demonstrated that papain concentration, time of application, and pH of the product should be evaluated when developing a product to promote the hydrolysis of the proteins of the skin.

Industrial applications of immobilized nano-biocatalysts

Immobilized enzyme-based catalytic constructs could greatly improve various industrial processes due to their extraordinary catalytic activity and reaction specificity. In recent decades, nano-enzymes, defined as enzyme immobilized on nanomaterials, gained popularity for the enzymes' improved stability, reusability, and ease of separation from the biocatalytic process. Thus, enzymes can be strategically incorporated into nanostructured materials to engineer nano-enzymes, such as nanoporous particles, nanofibers, nanoflowers, nanogels, nanomembranes, metal-organic frameworks, multi-walled or single-walled carbon nanotubes, and nanoparticles with tuned shape and size. Surface-area-to-volume ratio, pore-volume, chemical compositions, electrical charge or conductivity of nanomaterials, protein charge, hydrophobicity, and amino acid composition on protein surface play fundamental roles in the nano-enzyme preparation and catalytic properties. With proper understanding, the optimization of the above-mentioned factors will lead to favorable micro-environments for biocatalysts of industrial relevance. Thus, the application of nano-enzymes promise to further strengthen the advances in catalysis, biotransformation, biosensing, and biomarker discovery. Herein, this review article spotlights recent progress in nano-enzyme development and their possible implementation in different areas, including biomedicine, biosensors, bioremediation of industrial pollutants, biofuel production, textile, leather, detergent, food industries and antifouling.

Operational Stability, Regenerability, and Thermodynamics Studies on Biogenic Silica/Magnetite/Graphene Oxide Nanocomposite-Activated Candida rugosa Lipase

Inorganic biopolymer-based nanocomposites are useful for stabilizing lipases for enhanced catalytic performance and easy separation. Herein, we report the operational stability, regenerability, and thermodynamics studies of the ternary biogenic silica/magnetite/graphene oxide nanocomposite (SiO₂/Fe₃O₄/GO) as a support for Candida rugosa lipase (CRL). The X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), field-electron scanning electron microscopy (FESEM), vibrating sample magnetometry (VSM), and nitrogen adsorption/desorption data on the support and biocatalyst corroborated their successful fabrication. XPS revealed the Fe₃O₄ adopted Fe²⁺ and Fe³⁺ oxidation states, while XRD data of GO yielded a peak at 2θ = 11.67°, with the SiO₂/Fe₃O₄/GO revealing a high surface area (≈261 m²/g). The fourier transform infrared (FTIR) spectra affirmed the successful fabricated supports and catalyst. The half-life and thermodynamic parameters of the superparamagnetic immobilized CRL (CRL/SiO₂/Fe₃O₄/GO) improved over the free CRL. The microwave-regenerated CRL/SiO₂/Fe₃O₄/GO (≈82%) exhibited higher catalytic activity than ultrasonic-regenerated (≈71%) ones. Lower activation (Ea) and higher deactivation energies (Ed) were also noted for the CRL/SiO₂/Fe₃O₄/GO (13.87 kJ/mol, 32.32 kJ/mol) than free CRL (15.26 kJ/mol, 27.60 kJ/mol). A peak at 4.28 min in the gas chromatograph-flame ionization detection (GC-FID) chromatogram of the purified ethyl valerate supported the unique six types of 14 hydrogen atoms of the ester (CAS: 539-82-2) in the proton nuclear magnetic resonance (¹H-NMR) data. The results collectively demonstrated the suitability of SiO₂/Fe₃O₄/GO in stabilizing CRL for improved operational stability and thermodynamics and permitted biocatalyst regenerability.

Immobilization of papain: A review

Papain is a cysteine protease from papaya, with many applications due to its broad specificity. This paper reviews for first time the immobilization of papain on different supports (organic, inorganic or hybrid supports) presenting some of the features of the utilized immobilization strategies (e.g., epoxide, glutaraldehyde, genipin, glyoxyl for covalent immobilization). Special focus is placed on the preparation of magnetic biocatalysts, which will permit the simple recovery of the biocatalyst even if the medium is a suspension. Problems specific to the immobilization of proteases (e.g., steric problems when hydrolyzing large proteins) are also defined. The benefits of a proper immobilization (enzyme stabilization, widening of the operation window) are discussed, together with some artifacts that may suggest an enzyme stabilization that may be unrelated to enzyme rigidification.

Ternary biogenic silica/magnetite/graphene oxide composite for the hyperactivation of Candida rugosa lipase in the esterification production of ethyl valerate

Oil palm leaves (OPL) silica (SiO₂) can replace the energy-intensive, commercially produced SiO₂. Moreover, the agronomically sourced biogenic SiO₂ is more biocompatible and cost-effective enzyme support, which properties could be improved by the addition of magnetite (Fe₃O₄) and graphene oxide (GO) to yield better ternary support to immobilize enzymes, i.e., Candida rugosa lipase (CRL). This study aimed to optimize the Candida rugosa lipase (CRL immobilization onto the ternary OPL-silica-magnetite (Fe₃O₄)-GO (SiO₂/Fe₃O₄/GO) support, for use as biocatalyst for ethyl valerate (EV) production. Notably, this is the first study detailing the CRL/SiO₂/Fe3O4/GO biocatalyst preparation for rapid and high yield production of ethyl valerate (EV). AFM and FESEM micrographs revealed globules of CRL covalently bound to GL-A-SiO₂/Fe₃O₄/GO; similar to Raman and UV-spectroscopy results. FTIR spectra revealed amide bonds at 3478 cm^-1 and 1640 cm^-1 from covalent interactions between CRL and GL-A-SiO₂/Fe₃O₄/GO. Optimum immobilization conditions were 4% (v/v) glutaraldehyde, 8 mg/mL CRL, at 16 h stirring in 150 mM NaCl at 30 °C, offering 24.78 ± 0.26 mg/g protein (specific activity = 65.24 ± 0.88 U/g). The CRL/SiO₂/Fe₃O₄/GO yielded 77.43 ± 1.04 % of EV compared to free CRL (48.75 ± 0.70 %), verifying the suitability of SiO₂/Fe₃O₄/GO to hyperactivate and stabilize CRL for satisfactory EV production.

Evaluating enzyme stabilizations in calcium carbonate: Comparing in situ and crosslinking mediated immobilization

Enzyme immobilization using inorganic materials has been shown to preserve enzyme activity improving and improve their practical applications in biocatalytic process designs. Proper immobilization methods have been used to obtain high recycling and storage stability. In this study, we compared the activity and stability of in situ or crosslink-immobilized enzymes in a CaCO₃ biomineral carrier. More than 30% of the initial enzyme activity was preserved for both the systems after 180 days upon 15 activity measurements at room temperature, confirming the improved stability of these enzyme systems (100 mM phosphate buffer, pH 8.0); however, differences in enzyme loading, activity, and characteristics were observed for each of these methods. Each system exhibited efficacy of 80% and 20%, respectively. Based on the same amount of immobilized enzyme (0.2 mg), the specific activities of hydrolysis of p-nitrophenyl butyrate substrate at room temperature of in situ immobilized carboxyl esterase (CE) and crosslinked CE were 11.37 and 7.63 mM min^-1 mg^-1, respectively (100 mM phosphate buffer, pH 8.0). Moreover, based on the kinetic behavior, in situ immobilized CE exhibited improved catalytic efficiency (Vmax Km^-1) of the enzyme, exhibiting 4-fold higher activity and efficiency values than those of the CE immobilized in CaCO₃. This is the first study to describe the stabilization of enzymes in CaCO₃ and compare the enzyme kinetics and efficiencies between in situ immobilization and crosslinking in CaCO₃ carriers.

Immobilization of enzymes on nanoinorganic support materials: An update

Despite the widespread use in various industries, enzyme's instability and non-reusability limit their applications which can be overcome by immobilization. The nature of the enzyme's support material and method of immobilization affect activity, stability, and kinetics properties of enzymes. Here, we report a comparative study of the effects of inorganic support materials on immobilized enzymes. Accordingly, immobilization of enzymes on nanoinorganic support materials significantly improved thermal and pH stability. Furthermore, immobilizations of enzymes on the materials mainly increased K_m values while decreased the V_max values of enzymes. Immobilized enzymes on nanoinorganic support materials showed the increase in ΔG value, and decrease in both ΔH and ΔS values. In contrast to weak physical adsorption immobilization, covalently-bound and multipoint-attached immobilized enzymes do not release from the support surface to contaminate the product and thus the cost is decreased while the product quality is increased. Nevertheless, nanomaterials can enter the environment and increase health and environmental risks and should be used cautiously. Altogether, it can be predicated that hybrid support materials, directed immobilization methods, site-directed mutagenesis, recombinant fusion protein technology, green nanomaterials and trailor-made supports will be used increasingly to produce more efficient immobilized industrial enzymes in near future.

Use of Alcalase in the production of bioactive peptides: A review

This review aims to cover the uses of the commercially available protease Alcalase in the production of biologically active peptides since 2010. Immobilization of Alcalase has also been reviewed, as immobilization of the enzyme may improve the final reaction design enabling the use of more drastic conditions and the reuse of the biocatalyst. That way, this review presents the production, via Alcalase hydrolysis of different proteins, of peptides with antioxidant, angiotensin I-converting enzyme inhibitory, metal binding, antidiabetic, anti-inflammatory and antimicrobial activities (among other bioactivities) and peptides that improve the functional, sensory and nutritional properties of foods. Alcalase has proved to be among the most efficient proteases for this goal, using different protein sources, being especially interesting the use of the protein residues from food industry as feedstock, as this also solves nature pollution problems. Very interestingly, the bioactivities of the protein hydrolysates further improved when Alcalase is used in a combined way with other proteases both in a sequential way or in a simultaneous hydrolysis (something that could be related to the concept of combi-enzymes), as the combination of proteases with different selectivities and specificities enable the production of a larger amount of peptides and of a smaller size.

Modelling of methylene blue adsorption using peroxidase immobilized functionalized Buckypaper/polyvinyl alcohol membrane via ant colony optimization

Jicama peroxidase (JP) was covalently immobilized onto functionalized multi-walled carbon nanotube (MWCNT) Buckypaper/Polyvinyl alcohol (BP/PVA) membrane and employed for degradation of methylene blue dye. The parameters of the isotherm and kinetic models are estimating using ant colony optimization (ACO), which do not meddle the non-linearity form of the respective models. The proposed inverse modelling through ACO optimization was implemented, and the parameters were evaluated to minimize the non-linear error functions. The adsorption of MB dye onto JP-immobilized BP/PVA membrane follows Freundlich isotherm model (R² = 0.99) and the pseudo 1st order or 2nd kinetic model (R² = 0.980 & 0.968 respectively). The model predictions from the parameters estimated by ACO resulted values close the experimental values, thus inferring that this approach captured the inherent characteristics of MB adsorption. Moreover, the thermodynamic studies indicated that the adsorption was favourable, spontaneous, and exothermic in nature. The comprehensive structural analyses have confirmed the successful binding of peroxidase onto BP/PVA membrane, as well as the effective MB dye removal using immobilized JP membrane. Compared to BP/PVA membrane, the reusability test revealed that JP-immobilized BP/PVA membrane has better dye removal performances as it can retain 64% of its dye removal efficiency even after eight consecutive cycles. Therefore, the experimental results along with modelling results demonstrated that JP-immobilized BP/PVA membrane is expected to bring notable impacts for the development of effective green and sustainable wastewater treatment technologies.

Immobilization of Thermoalkalophilic Lipase from Bacillus atrophaeus FSHM2 on Amine-Modified Graphene Oxide Nanostructures: Statistical Optimization and Its Application for Pentyl Valerate Synthesis

Synthesis of (3-aminopropyl) triethoxysilane (APTES)-functionalized graphene oxide (GO) nanosheets, statistical optimization of conditions for immobilization of Bacillus atrophaeus lipase (BaL) on as-synthesized support, and application of the immobilized BaL for esterification of valeric acid were carried out in this investigation. The optimum specific activity of the immobilized BaL (81.60 ± 0.28 U mg^-1) was achieved at 3 mg mL^-1 of GO-NH₂, 50 mM of phosphate buffer, pH 7.0, 60 min sonication time, 100 mM glutaraldehyde, 25 U mL^-1 of enzyme, and 8 h immobilization time at 4 °C. The immobilized BaL retained about 90% of its initial activity after 10 days of storage. Moreover, about 70% of the initial activity of the immobilized BaL was retained after 10 cycles of application. The results of esterification studies exhibited that maximum pentyl valerate synthesis using the free BaL (34.5%) and the immobilized BaL (92.7%) occurred in the organic solvent medium (xylene) after 48 h of incubation at 60 °C.