Probing visible light induced photochemical stabilization of collagen in green solvent medium

Fabrication of fully aligned self-assembled cell-laden collagen filaments for tissue engineering via a hybrid bioprinting process

Cell-laden structures play a pivotal role in various tissue engineering applications, particularly in tissue restoration. Interactions between cells within bioprinted structures are crucial for successful tissue development and regulation of stem cell fate through intricate cell-to-cell signaling pathways. In this study, we developed a new technique that combines polyethylene glycol (PEG)-infused submerged bioprinting with a stretching procedure. This approach facilitated the generation of fully aligned collagen structures consisting of myoblasts and a low concentration (2 wt%) of collagen to efficiently encourage muscle tissue regeneration. By adjusting several processing parameters, we obtained biologically safe and mechanically stable cell-laden collagen filaments with uniaxial alignment. Notably, the cell filaments exhibited markedly elevated cellular activities compared to those exhibited by conventional bioprinted filaments, even at similar cell densities. Moreover, when we implanted structures containing adipose stem cells into mice, we observed a significantly increased level of myogenesis compared to that in normally bioprinted struts. Thus, this promising approach has the potential to revolutionize tissue engineering by fostering enhanced cellular interactions and promoting improved outcomes in regenerative medicine.

Photo-Controllable Smart Hydrogels for Biomedical Application: A Review

Nowadays, smart hydrogels are being widely studied by researchers because of their advantages such as simple preparation, stable performance, response to external stimuli, and easy control of response behavior. Photo-controllable smart hydrogels (PCHs) are a class of responsive hydrogels whose physical and chemical properties can be changed when stimulated by light at specific wavelengths. Since the light source is safe, clean, simple to operate, and easy to control, PCHs have broad application prospects in the biomedical field. Therefore, this review timely summarizes the latest progress in the PCHs field, with an emphasis on the design principles of typical PCHs and their multiple biomedical applications in tissue regeneration, tumor therapy, antibacterial therapy, diseases diagnosis and monitoring, etc. Meanwhile, the challenges and perspectives of widespread practical implementation of PCHs are presented in biomedical applications. This study hopes that PCHs will flourish in the biomedical field and this review will provide useful information for interested researchers.

Hybrid collagen-cellulose-Fe3O4@TiO2 magnetic bio-sponges derived from animal skin waste and Kenaf fibers for wastewater remediation

Water pollution from synthetic dyes and oil spills has a significant impact on the environment and living species. Here, we developed a low-cost, environmentally friendly and easily biodegradable magnetic hybrid bio-sponge nanocomposite from renewable resources such as collagen and cellulose (Kenaf fibre cellulose-collagen, KFCC). We loaded it with magnetic bimetallic Fe3O4@TiO2 (BFT) NPs to produce a photocatalyst material (KFCC-BFT) for the treatment of colored wastewater as well as a sorbent for oil-water separation. The characterization of the bimetallic BFT NPs by XRD, HRTEM and VSM showed the deposition of TiO2 particles onto the surface of Fe3O4 with lattice interlayers spacing of 0.24 and 0.33 nm for Fe3O4 and TiO2, respectively with ferromagnetic property. The UV-vis diffuse reflectance spectra result indicated that the band gap energy of bio-sponges decreases with the increase of the bimetallic moiety. The photocatalytic efficiency of the as-prepared magnetic hybrid bio-sponge in the degradation of crystal violet dye was up to 91.2% under visible light conditions and 86.6% under direct sunlight exposure. Furthermore, the magnetic hybrid bio-sponge was used to separate motor oil from water (> 99%) and had a high oil sorption capacity of 46.1 g/g. Investigation of the recyclability and reusability performance for 9 cycles revealed that the bio-sponge had a high sorption capacity for up to 5 cycles. Our results suggest that the bio-polymer-supported BFT hybrid nanocomposite is a cost-effective and easily biodegradable photocatalyst and has great potential for real-field environmental remediation applications.

The Use of Collagen-Based Materials in Bone Tissue Engineering

Synthetic bone substitute materials (BSMs) are becoming the general trend, replacing autologous grafting for bone tissue engineering (BTE) in orthopedic research and clinical practice. As the main component of bone matrix, collagen type I has played a critical role in the construction of ideal synthetic BSMs for decades. Significant strides have been made in the field of collagen research, including the exploration of various collagen types, structures, and sources, the optimization of preparation techniques, modification technologies, and the manufacture of various collagen-based materials. However, the poor mechanical properties, fast degradation, and lack of osteoconductive activity of collagen-based materials caused inefficient bone replacement and limited their translation into clinical reality. In the area of BTE, so far, attempts have focused on the preparation of collagen-based biomimetic BSMs, along with other inorganic materials and bioactive substances. By reviewing the approved products on the market, this manuscript updates the latest applications of collagen-based materials in bone regeneration and highlights the potential for further development in the field of BTE over the next ten years.

A photocatalytic chip inspired from the photovoltaics of polymer-immobilized surfaces: self-assembly and other factors

Polymers and carbon nanomaterials for bulk heterojunction photovoltaic devices have been used to develop an efficient reusable photocatalytic chip. Interestingly, it is highly effective when the materials are self-assembled in a particular pattern at a particular concentration ratio (Movies in the ESI).

The water soluble zinc based metal-organic frameworks (Zn-MOFs) as potential inhibitors for collagen fibrillogenesis

Small molecules ranging from organic to inorganic systems have been reported as stabilizing agents for collagen. Various transition metal complexes have been utilized as tanning agent. However, as per the environmental norms issued by various regulatory agencies, the presence of certain metals such as Cr, Fe, Al, Zr and Ti in leather has been restricted to minimal amount (50 ppm), an unsurmountable task. To overcome the above issue and find an alternative tanning system, here in this study, we have reported the interaction of two water-soluble zinc-based metal-organic frameworks (MOFs), i.e., ZnPV (1) and ZnPA (2), with collagen using various spectroscopic techniques. Fibrillation kinetics studies showed that a significant delay in fibril formation with Zn-MOFs treated collagen was observed compared to the collagen untreated/ treated with individual ligands and metal salt. Circular dichroism studies show that at a low weight ratio (1:0.2 and 1:1::Collagen: MOF), no perturbation in the triple helical structure was observed, while at higher weight ratio (1:4), denaturation of collagen occurs. FT-IR studies showed that no perturbation was observed in the amide backbone in MOF-treated collagen. Differential scanning calorimetric data revealed that both Zn-MOFs increased the thermal denaturation temperature by 22 ± 2 °C compared to the collagen treated with individual entities. The viscosity of collagen rises with the increase in the concentration of Zn-MOFs. To the best of our knowledge, this is the first report on the use of the metal-organic framework as a stabilizing agent for collagen structure and might help in exploring the MOFs as potential tanning agents.

Evaluation of a novel nano-size collagenous matrix film cross-linked with gallotannins catalyzed by laccase

The effect of hydrolysis degree of gallotannins (GT, 1 mg/g) on cross-linking of nano-size collagen catalyzed by laccase (12 U/g) was studied, and the antibacterial properties of GT hydrolysates (HGT)-laccase (Lac) collagen films on minced cod were also investigated. The results showed that the tensile strength of HGT-Lac films (87.23-100.77 MPa) was higher than those added HGT alone (85.59-95.58 MPa) under the same hydrolysis degree of GT. Compared to the denaturation temperature (78.05 °C) of pure nano-size collagen film without addition of HGT and laccase, the denaturation temperature of HGT (80.75-86.30 °C) and HGT-Lac (91.97-101.64 °C) films increased greatly, especially for HGT-Lac films. Moreover, both HGT and HGT-Lac films showed some mild antibacterial properties for minced cod during storage at 4 °C for 8 days. Therefore, the combination of HGT and laccase could improve the performance of nano-size collagen film and extend the application of collagen in biodegradable/edible packaging.

Upconversion Nanodevice-Assisted Healthy Molecular Photocorrection

Mushrooms are rich in ergosterol, a precursor of ergocalciferol, which is a type of vitamin D₂. The conversion of ergosterol to ergocalciferol takes place in the presence of UV radiation by the cleavage of the "B-ring" in the ergosterol. As the UV radiation cannot penetrate deep into the tissue, only minimal increase occurs in sunlight. In this study, upconversion nanoparticles with the property to convert deep-penetrating near-infrared radiation to UV radiation have been cast into a disk to use sunlight and emit UV radiation for vitamin D conversion. An engineered upconversion nanoparticle (UCNP) disk with maximum particles and limited clusters demonstrates ∼2.5 times enhanced vitamin D₂ conversion.

Biomaterial-based microstructures fabricated by two-photon polymerization microfabrication technology

Two-photon polymerization (TPP) microfabrication technology can freely prepare micro/nano structures with different morphologies and high accuracy for micro/nanophotonics, micro-electromechanical systems, microfluidics, tissue engineering and drug delivery.