Comparison of the immobilization of lipase from Pseudomonas fluorescens on divinylsulfone or p-benzoquinone activated support

Copper Phthalocyanine Improving Nonaqueous Catalysis of Pseudomonas cepacia Lipase for Ester Synthesis

The nonaqueous catalysis of lipases is significant for synthesis of high pure esters, but they usually behave low catalytic activity due to denaturation and aggregation of enzyme protein in organic phases. To improve the nonaqueous catalysis, the inexpensive copper phthalocyanine was taken as a new carrier on which Pseudomonas cepacia lipase was immobilized by physical absorption, and used for synthesis of hexyl acetate, an important flavor, via transesterification of hexanol and vinyl acetate. Results showed that the desired loading was 10-mg lipase immobilized on 10-mg copper phthalocyanine powder. When the immobilized lipase was employed in the reaction system consisted of 1.5-mL hexanol and 1.5-mL vinyl acetate at 37°C and 160 rpm, the conversion was fivefolds of that catalyzed by native lipase after 1 h, and reached 99.0% after 8 h. In six times of 8-h reuses, the immobilized lipase behaved an activity attenuation rate 1.22% h-1, lower than 1.77% h-1 of native lipase, which meant that the immobilized lipase was more stable. Even at the room temperature and the static state without shaking or stirring, the immobilized lipase still brought conversion 42.8% after 10 h and the native lipase gave 20.1%. Obviously, the immobilized lipase is an available biocatalyst in organic phase and has great potential in food industry.

Advances and Applications of Metal-Organic Frameworks (MOFs) in Emerging Technologies: A Comprehensive Review

Metal-organic frameworks (MOFs) that are the wonder material of the 21st century consist of metal ions/clusters coordinated to organic ligands to form one- or more-dimensional porous structures with unprecedented chemical and structural tunability, exceptional thermal stability, ultrahigh porosity, and a large surface area, making them an ideal candidate for numerous potential applications. In this work, the recent progress in the design and synthetic approaches of MOFs and explore their potential applications in the fields of gas storage and separation, catalysis, magnetism, drug delivery, chemical/biosensing, supercapacitors, rechargeable batteries and self-powered wearable sensors based on piezoelectric and triboelectric nanogenerators are summarized. Lastly, this work identifies present challenges and outlines future opportunities in this field, which can provide valuable references.

Recent applications and future prospects of magnetic biocatalysts

Magnetic biocatalysts combine magnetic properties with the catalytic activity of enzymes, achieving easy recovery and reuse in biotechnological processes. Lipases immobilized by magnetic nanoparticles dominate. This review covers an advanced bibliometric analysis and an overview of the area, elucidating research advances. Using WoS, 34,949 publications were analyzed and refined to 450. The prominent journals, countries, institutions, and authors that published the most were identified. The most cited articles showed research hotspots. The analysis of the themes and keywords identified five clusters and showed that the main field of research is associated with obtaining biofuels derived from different types of sustainable vegetable oils. The overview of magnetic biocatalysts showed that these materials are also employed in biosensors, photothermal therapy, environmental remediation, and medical applications. The industry shows a significant interest, with the number of patents increasing. Future studies should focus on immobilizing new lipases in unique materials with magnetic profiles, aiming to improve the efficiency for various biotechnological applications.

Lipase catalysis: an environmentally friendly production for polyol esters (biolubricant) from microalgae oil

ABSTRACTThis study aims to investigate the optimized lipase-catalysed esterification reaction from novel feedstock microalgae (Chlorella protothecoides) oil-free fatty acids (FFAs) for biolubricant (Trimethylolpropane (TMP)-triesters) synthesis. FFAs were obtained from microalgae oil by enzymatic hydrolysis. Response surface methodology (RSM) with the central composite design was performed to investigate the effect of experimental factors (lipase amount, TMP/FFAs molar ratio, reaction temperature) on the FFAs conversion and also investigated to resolve the optimum design points. After the experimental studies, the highest FFAs conversion of 93% with 92% triester and 8% mono, di esters contents were found when the lipase amount was 5.5%. TMP/FFAs molar ratio was 0.33 and the reaction temperature value was 60°C. The model fitted with the experimental values with R2 = 0.97. It was also supported by gas chromatography and FTIR analyses that the product obtained was a lubricant.

Enzyme immobilization technology as a tool to innovate in the production of biofuels: A special review of the Cross-Linked Enzyme Aggregates (CLEAs) strategy

This review emphasizes the crucial role of enzyme immobilization technology in advancing the production of two main biofuels, ethanol and biodiesel, with a specific focus on the Cross-linked Enzyme Aggregates (CLEAs) strategy. This method of immobilization has gained attention due to its simplicity and affordability, as it does not initially require a solid support. CLEAs synthesis protocol includes two steps: enzyme precipitation and cross-linking of aggregates using bifunctional agents. We conducted a thorough search for papers detailing the synthesis of CLEAs utilizing amylases, cellulases, and hemicellulases. These key enzymes are involved in breaking down starch or lignocellulosic materials to produce ethanol, both in first and second-generation processes. CLEAs of lipases were included as these enzymes play a crucial role in the enzymatic process of biodiesel production. However, when dealing with large or diverse substrates such as lignocellulosic materials for ethanol production and oils/fats for biodiesel production, the use of individual enzymes may not be the most efficient method. Instead, a system that utilizes a blend of enzymes may prove to be more effective. To innovate in the production of biofuels (ethanol and biodiesel), enzyme co-immobilization using different enzyme species to produce Combi-CLEAs is a promising trend.

Study of volatile compounds profiles in milk matrices using Enterococcus faecalis EstA and Rhizomucor miehei lipase

The use of esterase/lipase enzymes of different origins in food industry is a widely employed strategy to enhance the formation of characteristic aromatic compounds derived from fat and diversify flavour. In the present work, we studied EstA enzyme of Enterococcus faecalis and a high purity Rhizomucor miehei lipase (Palatase). EstA was obtained recombinantly in Escherichia coli BL21 (DE3), and optimum esterase activity was detected at pH 6.75 and 40 °C. We evaluated the effect of the enzymes on milk mixtures prepared with different fat contents (2.8 and 6%) and structure (native or homogenized) on volatile compounds profiles. The milk fat structure before and after the application of low homogenization was characterized by dynamic light dispersion and microscopy. Native milk fat mixtures presented particles of 4.6 μm and 184 nm and homogenized mixtures had particles of 1.4 μm and 258 nm; microscopy images were in concordance with these results. Fifteen volatile compounds were identified, including ketones, esters, alcohols, and acids. We showed the key role of milk fat levels and microstructure in the nature of the volatile compounds produced by the R. miehei enzyme. Both in native or homogenized states, the highest content of fat favored a higher production of acids whereas the lowest fat level favored a higher esters production along with a more balanced volatile profile. For EstA enzyme, results showed a limited action on fat, as biosynthesis of esters only increased with the highest fat level homogenized.

A comprehensive review on nanocatalysts and nanobiocatalysts for biodiesel production in Indonesia, Malaysia, Brazil and USA

Biodiesel is an alternative to fossil-derived diesel with similar properties and several environmental benefits. Biodiesel production using conventional catalysts such as homogeneous, heterogeneous, or enzymatic catalysts faces a problem regarding catalysts deactivation after repeated reaction cycles. Heterogeneous nanocatalysts and nanobiocatalysts (enzymes) have shown better advantages due to higher activity, recyclability, larger surface area, and improved active sites. Despite a large number of studies on this subject, there are still challenges regarding its stability, recyclability, and scale-up processes for biodiesel production. Therefore, the purpose of this study is to review current modifications and role of nanocatalysts and nanobiocatalysts and also to observe effect of various parameters on biodiesel production. Nanocatalysts and nanobiocatalysts demonstrate long-term stability due to strong Brønsted-Lewis acidity, larger active spots and better accessibility leading to enhancethe biodiesel production. Incorporation of metal supporting positively contributes to shorten the reaction time and enhance the longer reusability. Furthermore, proper operating parameters play a vital role to optimize the biodiesel productivity in the commercial scale process due to higher conversion, yield and selectivity with the lower process cost. This article also analyses the relationship between different types of feedstocks towards the quality and quantity of biodiesel production. Crude palm oil is convinced as the most prospective and promising feedstock due to massive production, low cost, and easily available. It also evaluates key factors and technologies for biodiesel production in Indonesia, Malaysia, Brazil, and the USA as the biggest biodiesel production supply.

Climatic Chamber Stability Tests of Lipase-Catalytic Octyl-Sepharose Systems

The application of the climatic chamber presented in this paper to assess the storage stability of immobilized lipases is a new approach characterized by the potential of unifying the study conditions of biocatalysts created in various laboratories. The data achieved from storing lipases in the climatic chambers may be crucial for the chemical and pharmaceutical industry. Our paper describes the developed protocols for immobilization via interfacial activation of lipase B from Candida antarctica (CALB) and lipase OF from Candida rugosa (CRL-OF) on the Octyl-Sepharose CL-4B support. Optimization included buffers with different pH values of 4–9 and a wide range of ionic strength from 5 mM to 700 mM. It has been shown that the optimal medium for the CALB immobilization process on the tested support is a citrate buffer at pH 4 and high ionic strength of 500 mM. Implementing new optimal procedures enabled the hyperactivation of immobilized CALB (recovery activity 116.10 ± 1.70%) under the applicable reaction conditions using olive oil as a substrate. Importantly, CALB storage stability tests performed in a climatic chamber under drastic temperature and humidity conditions proved good stability of the developed biocatalyst (residual activity 218 ± 7.3% of dry form, after 7 days). At the same time, the low storage stability of CRL OF in a climatic chamber was demonstrated. It should be emphasized that the use of a climatic chamber to test the storage stability of a dry form of the studied lipases immobilized on Octyl-Sepharose CL-4B is, to our knowledge, described for the first time in the literature.

Carbohydrate microcapsules tailored and grafted for covalent immobilization of glucose isomerase for pharmaceutical and food industries

Carrageenan is one of the most common carbohydrates utilised in the entrapment industry to immobilise cells and enzymes. However, it lacks functionality. Carrageenan has been grafted to produce fructose by covalently immobilising glucose isomerase (GI). Fructose is one of the most widely used sweeteners in beverages, food production, and the pharmaceutical business. Up to 91.1 U g^-1 gel beads are immobilised by the grafted beads. Immobilized GI has a V_max of 13.8 times that of the free enzyme. pH of immobilized GI was improved from 6.5-7 to 6-7.5 that means more stability in wide pH range. Also, optimum temperature was improved and become 65-75 °C while it was at 70 °C for free enzyme. The immovability and tolerance of the gel beads immobilised with GI over 15 consecutive cycles were demonstrated in a reusability test, with 88 percent of the enzyme's original activity retained, compared to 60 percent by other authors. These findings are encouraging for high-fructose corn syrup producers.

Enantioselective resolution of (R,S)-DMPM to prepare (R)-DMPM by an adsorbed-covalent crosslinked esterase PAE07 from Pseudochrobactrum asaccharolyticum WZZ003

(R)-N-(2,6-dimethylphenyl) aminopropionic acid methyl ester ((R)-DMPM) is an important chiral intermediate of the fungicide N-(2,6-Dimethylphenyl)-N-(methoxyacetyl)-alanine methyl ester ((R)-Metalaxyl). In this study, (1) D3520 (macroporous acrylic anion resin), selected from the ten resins, was used to immobilize the esterase from Pseudochrobactrum asaccharolyticum WZZ003 (PAE07) for resoluting the (R,S)-DMPM to obtain (R)-DMPM. (2) Up to 20 g/L PAE07 could be immobilized onto D3520 with a high enzymatic activity of 32.4 U/g. Moreover, the Km and Vmax values of 19.1 mM and 2.8 mM/min for D3520-immobilized PAE07 indicated its high activity and stereoselectivity. (3) The optimal temperature and pH for the immobilized PAE07 were 40 ℃ and 8.0, and substrate concentration was up to 0.35 M. After 15 h reaction, the conversion rate from (R,S)-DMPM to (R)-DMPM was 48.0% and the e.e.p and E values were 99.5% and 1393.0, respectively. In scale-up resolution, 200 g/L substrate and 12.5 g immobilized esterase PAE07 condition, a conversion rate from substrate to product of 48.1% and a product e.e.p of 98% were obtained within 12 h, with the activity of immobilized PAE07 retained 80.2% after 5 cycles of reactions. These results indicated that the D3520-immobilized esterase PAE07 had great potential for enzymatic resolution of (R,S)-DMPM to prepare (R)-Metalaxyl.

Structural features, temperature adaptation and industrial applications of microbial lipases from psychrophilic, mesophilic and thermophilic origins

Microbial lipases are very prominent biocatalysts because of their ability to catalyze a wide variety of reactions in aqueous and non-aqueous media. Here microbial lipases from different origins (psychrophiles, mesophiles, and thermophiles) have been reviewed. This review emphasizes an update of structural diversity in temperature adaptation and industrial applications, of psychrophilic, mesophilic, and thermophilic lipases. The microbial origins of lipases are logically dynamic, proficient, and also have an extensive range of industrial uses with the manufacturing of altered molecules. It is therefore of interest to understand the molecular mechanisms of adaptation to temperature in occurring lipases. However, lipases from extremophiles (psychrophiles, and thermophiles) are widely used to design biotransformation reactions with higher yields, fewer byproducts, or useful side products and have been predicted to catalyze those reactions also, which otherwise are not possible with the mesophilic lipases. Lipases as a multipurpose biological catalyst have given a favorable vision in meeting the needs of several industries such as biodiesel, foods, and drinks, leather, textile, detergents, pharmaceuticals, and medicals.

An overview on the conversion of glycerol to value-added industrial products via chemical and biochemical routes

Glycerol is a common by-product of industrial biodiesel syntheses. Due to its properties, availability, and versatility, residual glycerol can be used as a raw material in the production of high value-added industrial inputs and outputs. In particular, products like hydrogen, propylene glycol, acrolein, epichlorohydrin, dioxalane and dioxane, glycerol carbonate, n-butanol, citric acid, ethanol, butanol, propionic acid, (mono-, di-, and triacylglycerols), cynamoil esters, glycerol acetate, benzoic acid, and other applications. In this context, the present study presents a critical evaluation of the innovative technologies based on the use of residual glycerol in different industries, including the pharmaceutical, textile, food, cosmetic, and energy sectors. Chemical and biochemical catalysts in the transformation of residual glycerol are explored, along with the factors to be considered regarding the choice of catalyst route used in the conversion process, aiming at improving the production of these industrial products.

The evaluation of the performance of rice husk and rice straw as potential matrix to obtain the best lipase immobilized system: creating wealth from wastes

India generates 126.6 and 42 million tons of Rice straw (RS) and Rice husk (RH) annually, respectively. These agro-processing wastes feedstock are dumped in landfills or burnt, releasing toxic gases and particulate matter into the environment. This paper explores the valorization of these wastes feedstock into sustainable, economic products. We compare these wastes as matrices for lipase immobilization. These matrices were characterized, different parameters (pH, temperature, ionic strength, and metal ion cofactors) were checked, and the selected matrix was analyzed for reusability and hydrolysis of vegetable oils. Lipase immobilized Rice straw (LIRS) showed the highest activity with 72.84% protein loading. Field emission scanning electron microscopy (FESEM) demonstrated morphological changes after enzyme immobilization. FTIR showed no new bond formation, and immobilization data was fitted to Freundlich adsorption isotherm (with K = 12.18 mg/g, n_F = 4.5). The highest activity with protein loading, 91.05%, was observed at pH 8, 37 °C temperature, 50 mM ionic strength, and lipase activity doubled in the presence of Mg²⁺ ions. The LIRS retained 75% of its initial activity up to five cycles and efficiently hydrolyzed different oils. The results reflected that the LIRS system performs better and can be used to degrade oily waste.

Directed Immobilization of PETase on Mesoporous Silica Enables Sustained Depolymerase Activity in Synthetic Wastewater Conditions

Microplastic accumulation in terrestrial and aquatic environments is a growing environmental challenge. Biodegradation has shown promise as an intervention strategy for reducing the spread of microplastics. The wastewater treatment system is a key intervention point in microplastic biodegradation due to its pivotal role in the water cycle at the interface between human activity and the environmental. However, the best characterized microplastic degradation enzyme, PETase, lacks the stability to perform at scale in wastewater treatment. In this work, we show that genetic fusion of PETase to a silica binding peptide enables directed immobilization of the enzyme onto silica nanoparticles. PETase activity in simulated wastewater conditions is quantified by linear regression from time zero to the time of maximum fluorescence of a fluorescent oxidized product of PETase degradation of PET microfibers. Mesoporous silica is shown to be a superior support material to nonporous silica. The resulting biocatalytic nanomaterial has up to 2.5-fold enhanced stability and 6.2-fold increased activity compared to free enzyme in unbuffered, 40 °C simulated influent (ionic strength ∼15 mM). In unbuffered, 40 °C simulated effluent (ionic strength ∼700 μM), reaction velocity and overall catalytic activity were increased by the biocatalytic material 2.1-fold relative to free PETase. All reactions were performed in 0.2 mL volumes, and enzyme concentrations were normalized across both free and immobilized samples to 9 μg/mL. Site-directed mutagenesis is shown to be a complementary technique to directed immobilization, which may aid in optimization of the biomaterial for wastewater applications. PETase stabilization in application-relevant environments as shown here enables progress toward application of PETase for microplastic biodegradation in wastewater treatment.

Immobilization of Candida antarctica Lipase A onto Macroporous Resin NKA-9: Esterification and Glycerolysis Performance Study

In this study, lipase A from Candida antarctica (CALA) was immobilized onto the macroporous resin NKA-9. Immobilization conditions (pH, time and CALA concentration) were studied, enzymatic activity and immobilization efficiency (IE) up to 968.89 U/g and 53.19% were respectively obtained under optimal conditions (immobilization pH 5.0, time 5 h and CALA concentration at 30 mg/mL). Then, the NKA-9 supported CALA (CALA@NKA-9) samples were used to catalyze glycerolysis in solvent-free system. With 0.25 g of the present CALA@NKA-9 (soybean oil 3.52 g and glycerol 0.184 g) and after 12 h reaction at 50 °C, diacylglycerols (DAG) content up to 64.37% and triacylglycerols (TAG) conversion at 83.33% were obtained. The relationship between temperature and TAG conversion was LnV ₀ = 13.9310-6.4212/T for CALA@NKA-9. Meanwhile, the activation energy (Ea) of CALA@NKA-9 was calculated to be 53.39 kJ/mol. In addition, reusability in the glycerolysis reaction was also evaluated, and 57.82% of the initial glycerolysis activity was retained after 9 consecutive applications. Furthermore, the CALA@NKA-9 was also used to catalyze the esterification (esterification of fatty acids with glycerol), however, the present CALA@NKA-9 cannot initiate the esterification. Therefore, the present CALA@NKA-9 is shown to be potential for DAG production through glycerolysis reaction.

Encapsulation of lipases by nucleotide/metal ion coordination polymers: enzymatic properties and their applications in glycerolysis and esterification studies

BACKGROUND

In the present study, lipases of TLL (lipase from Thermomyces lanuginosus), AOL (lipase from Aspergillus oryzae), RML (lipase from Rhizomucor miehei), BCL (lipase from Burkholderia cepacia), CALA (Candida antarctica lipase A) and LU (Lecitase® Ultra) were encapsulated into nucleotide-hybrid metal coordination polymers (CPs). Enzyme concentration was optimized for encapsulation and the enzymatic properties of the obtained lipases were investigated. In addition, their performance in glycerolysis and esterification was evaluated, and glycerolysis conditions (water content, temperature and time) were optimized.

RESULTS

Hydrolysis activity over 10 000 U g^-1 and activity recovery over 90% were observed from AOL@GMP/Tb, TLL@GMP/Tb and RML@GMP/Tb. GMP/Tb encapsulation (of AOL, TLL, RML and LU) improved their thermostability when incubated in air. The encapsulated lipases exhibited moderate [triacylglycerols (TAG) conversion 30-50%] and considerable glycerolysis activity (TAG conversion over 60%). TAG conversions from 69.37% to 82.35% and diacylglycerols (DAG) contents from 58.62% to 64.88% were obtained from CALA@GMP/metal samples (except for CALA@GMP/Cu). Interestingly, none of the encapsulated lipases initiated the esterification reaction. AOL@GMP/Tb, TLL@GMP/Tb, RML@GMP/Tb and CALA@GMP/Tb showed good reusability in glycerolysis, with 88.80%, 94.67%, 89.85% and 78.16% of their initial glycerolysis activity, respectively, remaining after five cycles of reuse. The relationships between temperature and TAG conversion were LnV₀  = 6.5364-3.7943/T and LnV₀  = 13.8820-6.4684/T for AOL@GMP/Tb and CALA@GMP/Tb, respectively; in addition, their activation energies were 31.55 and 53.78 kJ mol^-1 , respectively.

CONCLUSION

Most of the present encapsulated lipases exhibited moderate and considerable glycerolysis activity. In addition, AOL@GMP/Tb, TLL@GMP/Tb, RML@GMP/Tb and CALA@GMP/Tb exhibited good reusability in glycerolysis reactions and potential in practical applications. © 2022 Society of Chemical Industry.

The High ‘Lipolytic Jump’ of Immobilized Amano A Lipase from Aspergillus niger in Developed ‘ESS Catalytic Triangles’ Containing Natural Origin Substrates

Lipase Amano A from Aspergillus niger (AA-ANL) is among the most commonly applied enzymes in biocatalysis processes, making it a significant scientific subject in the pharmaceutical and medical disciplines. In this study, we investigated the lipolytic activity of AA-ANL immobilized onto polyacrylic support IB-150A in 23 oils of natural origin containing various amounts of polyunsaturated fatty acids (PUFAs) and monounsaturated fatty acids (MUFAs). The created systems were expressed as an ‘ESS catalytic triangle’. A distinct ‘jump’ (up to 2400%) of lipolytic activity of immobilized AA-ANL compared to free lipase and hyperactivation in mostly tested substrates was observed. There was a ‘cutoff limit’ in a quantitative mutual ratio of ω-PUFAs/MUFAs, for which there was an increase or decrease in the activity of the immobilized AA-ANL. In addition, we observed the beneficial effect of immobilization using three polyacrylic supports (IB-150A, IB-D152, and IB-EC1) characterized by different intramolecular interactions. The developed substrate systems demonstrated considerable hyperactivation of immobilized AA-ANL. Moreover, a ‘lipolytic jump’ in the full range of tested temperature and pH was also observed. The considerable activity of AA-ANL-IB-150A after four reuse cycles was demonstrated. On the other hand, we observed an essential decrease in stability of immobilized lipase after 168 h of storage in a climate chamber. The tested kinetic profile of immobilized AA-ANL confirmed the increased affinity to the substrate relative to lipase in the free form.

Copper Phthalocyanine Improving Nonaqueous Catalysis of Pseudomonas cepacia Lipase for Ester Synthesis

The nonaqueous catalysis of lipases is significant for synthesis of high pure esters, but they usually behave low catalytic activity due to denaturation and aggregation of enzyme protein in organic phases. To improve the nonaqueous catalysis, the inexpensive copper phthalocyanine was taken as a new carrier on which Pseudomonas cepacia lipase was immobilized by physical absorption, and used for synthesis of hexyl acetate, an important flavor, via transesterification of hexanol and vinyl acetate. Results showed that the desired loading was 10 mg lipase immobilized on 10 mg copper phthalocyanine powder. When the immobilized lipase was employed in the reaction system consisted of 1.5 mL hexanol and 1.5 mL vinyl acetate at 37℃ and 160 rpm, the conversion was five fold of that catalyzed by native lipase after 1 h, and reached 99.0% after 8 h. Undergoing six times of 8-h reuses, the immobilized lipase had an activity attenuation rate 1.22% h^- 1, lower than 1.77% h^- 1 of native lipase, which meant that the immobilized lipase was more stable. Even at the room temperature and the static state without shaking or stirring, the immobilized lipase could bring conversion 42.8% after 10 h and the native lipase gave 20.1%. Obviously, the immobilized lipase is an available biocatalyst in organic phase and has great potential in food industry.

Biomolecular Chemical Simulations on Enantioselectivity and Reactivity of Lipase Enzymes to Azulene Derivatives

Biomolecular chemical simulations have recently become a useful research method in the fields of organic chemistry and bioscience. In the last few years, we have been focusing on the biomolecular computational simulation on lipase enzyme and ligand complexes to predict the enantioselectivity and reactivity of lipases toward non-natural organic compounds. In this paper, we describe the molecular simulations including molecular dynamics (MD) and fragment molecular orbital (FMO) calculations for the complexes of Candida antarctica lipase type A (CALA) and trifluoromethylazulene alcohol derivatives. From the MD calculations, we found that the fast-reacting enantiomer of esters with high enantioselectivity stays in the vicinity of the active site of CALA, while the slow-reacting enantiomer leaves the active site of CALA. On the other hand, both ( R)- and ( S)-enantiomers of ester with low ensntioselectivity were found to keep near to near the active site of CALA. Further, for the esters that do not react with lipase enzyme, we found that both ( R)- and ( S)-enantiomers move away from the active site of lipase enzyme. From the FMO calculations, we found that each fast-reacting enantiomer of esters with high enantioselectivity strongly interacts with certain particular amino acid residues in CALA containing Asp95, while both ( R)- and ( S)-enantiomers of ester with low enantioselectivity interact with same amino acid residues in CALA including Asp95. These results suggest that it is possible to predict not only the enantioselectivity but also the reactivity of CALA and to identify the amino acid residues important to the enzymatic reaction. Therefore, we consider that our computational simulations would be a useful method for predicting and understanding the reactivity and the enantioselectivity of lipase-catalyzed biotransformations.

Rebuilding the lid region from conformational and dynamic features to engineering applications of lipase in foods: Current status and future prospects

The applications of lipases in esterification, amidation, and transesterification have broadened their potential in the production of fine compounds with high cumulative values. Mostly, the catalytic triad of lipases is covered by either one or two mobile peptides called the "lid" that control the substrate channel to the catalytic center. The lid holds unique conformational allostery via interfacial activation to regulate the dynamics and catalytic functions of lipases, thereby highlighting its importance in redesigning these enzymes for industrial applications. The structural characteristic of lipase, the dynamics of lids, and the roles of lid in lipase catalysis were summarized, providing opportunities for rebuilding lid region by biotechniques (e.g., metagenomic technology and protein engineering) and enzyme immobilization. The review focused on the advantages and disadvantages of strategies rebuilding the lid region. The main shortcomings of biotechnologies on lid rebuilding were discussed such as negative effects on lipase (e.g., a decrease of activity). Additionally, the main shortcomings (e.g., enzyme desorption at high temperatre) in immobilization on hydrophobic supports via interfacial action were presented. Solutions to the mentioned problems were proposed by combinations of computational design with biotechnologies, and improvements of lipase immobilization (e.g., immobilization protocols and support design). Finally, the review provides future perspectives about designing hyperfunctional lipases as biocatalysts in the food industry based on lid conformation and dynamics.

Characterization of the chimeric protein cUBC1 engineered by substituting the linker of E2-25K into UBC1 enzyme of Saccharomyces cerevisiae

Ubiquitination is an important posttranslational modification of proteins in eukaryotic cells, wherein ubiquitin molecules are conjugated to target proteins. Ubiquitination is catalyzed by the cascade of ubiquitin activating enzyme (E1), ubiquitin conjugating enzyme (E2), and ubiquitin ligase (E3). The number of E2s encoded in eukaryotes partly explains their contribution to the inherent specificity of the ubiquitin system. The ubiquitin conjugating enzyme UBC1 of Saccharomyces cerevisiae participates the degradation of short-lived and abnormal proteins. UBC1 consists of two well-defined domains separated by a long flexible linker. E2-25K, the human homolog of UBC1 is crucial to neurons and its failure leads to neurodegenerative disorders. The linker of UBC1 is of 22 amino acids, while that of E2-25K has 6 amino acids. To understand the importance of the linker, the chimeric protein, cUBC1 was constructed by substituting the linker of E2-25K in UBC1. cUBC1 shows minor changes in its secondary structure. cUBC1 expression in ubc1 deletion mutants showed no effect over growth, thermotolerance and resistance to antibiotic stress. However, survival under heat stress was enhanced with cUBC1. Western blot analysis of the enzymatic activity showed cUBC1 performed equally well as UBC1. Hence, cUBC1 demonstrates that the shorter linker increased the stability of UBC1.

Efficient hydrolysis of starch by α-amylase immobilized on cloisite 30B and modified forms of cloisite 30B by adsorption and covalent methods

In this paper, α-amylase from Bacillus subtilis was successfully immobilized on three supports. First, α-amylase was immobilized on cloisite 30B via the adsorption method. Then cloisite 30B was activated with tosyl chloride and epichlorohydrin. These activated supports were used for covalent immobilization of α-amylase, and their enzymatic activities were effectively tested in the starch hydrolysis. The results demonstrated that the specific activity of α-amylase immobilized on cloisite 30B was 2.39 ± 0.03, for α-amylase immobilized on activated cloisite 30B with epichlorohydrin was 1.96 ± 0.05 and for α-amylase immobilized on activated cloisite 30B with tosyl chloride was 2.17 ± 0.05 U mg^-1. The optimum pH for the activity of free α-amylase was 7, but for α-amylase immobilized on cloisite 30B was 8, and for α-amylase immobilized on activated supports was 7.5. The immobilized enzymes had better thermal resistance and storage stability than free α-amylase, and they also showed excellent reusability.

Challenges and opportunities of using immobilized lipase as biosensor

Over the years, the science of biosensors has evolved significantly. The first or earliest generation of biosensors only detected either the decrease or increase of product or reactant-based natural mediators as the pathway for electron transfer. The subsequent second-generation biosensors were biomolecule based and used artificial redox mediators, such as organic dyes to detect and to increase the reproducibility and sensitivity of the result. However, the recent generation of biosensors work mostly on the principle of electron mobility, with different criteria, such as selectivity, precision, sensitivity, etc., can be used to quantify, efficiently. This review deals with exploring the scope and applications of Immobilized lipase biosensors. Generally, Triglycerides or TG molecules are either detected using Gas Chromatography or, using a chemical or an enzymatic assay. Immobilization of lipase on solid supports has led to increased stability and reusability of the enzyme in non-aqueous solvents. With better enzyme performance, efficient product recovery, and separation from the reaction, immobilized lipase biosensors are garnering increasing interest worldwide. Along with so many advantages including but not limiting to ones mentioned earlier, immobilized lipase-based biosensors come with their own set of challenges, such as the partitioning of the analyte with aqueous medium, slower reaction rate, etc., they have been discussed in the following review. Alongside, we also review the development of a new generation of biosensors and bioelectronic devices based on nanotechnology.

Fabrication of lipase-loaded particles by coacervation with chitosan

Coacervation of the lipase from Aspergillus oryzae (AOL) with chitosan was a feasible way to fabricate lipase-loaded particles and the optimum conditions were phase separation pH 5.5, chitosan to AOL mass ratio 1:5, and temperature 25 °C in the absence of NaCl, which conferred an AOL loading efficiency of up to 95.48% and activity recovery of 69.60%. The AOL-chitosan coacervates were highly porous and more susceptible to weight loss upon heating. Coacervation with chitosan increased the activity of AOL and shifted its optimum pH from 7.0 to 6.0, but exerted no effect on its optimum temperature (45 °C). Thermal deactivation kinetics analysis revealed that the coacervated AOL was more thermal stable, while the Michaelis-Menten kinetics analysis indicated that coacervation with chitosan increased the V_max of AOL by 2.4 folds, but decreased its substrate affinity by 3.6 folds. Hence, the AOL-chitosan coacervates are potential in the construction of Pickering emulsion-based lipase catalysis systems.

Preparation and characterization of stable core/shell Fe3O4@Au decorated with an amine group for immobilization of lipase by covalent attachment

The self-assembly approach was used for amine decoration of core/shell Fe₃O₄@Au with 4-aminothiophenol. This structure was used for covalent immobilization of lipase using a Ugi 4-component reaction. The amine group on the structure and carboxylic group from lipase can react in the Ugi reaction and a firm and stable covalent bond is created between enzyme and support. The synthesized structure was fully characterized and its activity was explored in different situations. The results showed the pH and temperature stability of immobilized lipase compared to free lipase in a wide range of pH and temperature. Also after 60 days, it showed excellent activity while residual activity for the free enzyme was only 10%. The synthesized structure was conveniently separated using an external magnetic field and reused 6 times without losing the activity of the immobilized enzyme.

The self-assembly approach was used for amine decoration of core/shell Fe₃O₄@Au with 4-aminothiophenol.

A Comprehensive Review on the Use of Metal–Organic Frameworks (MOFs) Coupled with Enzymes as Biosensors

Several studies have shown the development of electrochemical biosensors based on enzymes immobilized in metal–organic frameworks (MOFs). Although enzymes have unique properties, such as efficiency, selectivity, and environmental sustainability, when immobilized, these properties are improved, presenting significant potential for several biotechnological applications. Using MOFs as matrices for enzyme immobilization has been considered a promising strategy due to their many advantages compared to other supporting materials, such as larger surface areas, higher porosity rates, and better stability. Biosensors are analytical tools that use a bioactive element and a transducer for the detection/quantification of biochemical substances in the most varied applications and areas, in particular, food, agriculture, pharmaceutical, and medical. This review will present novel insights on the construction of biosensors with materials based on MOFs. Herein, we have been highlighted the use of MOF for biosensing for biomedical, food safety, and environmental monitoring areas. Additionally, different methods by which immobilizations are performed in MOFs and their main advantages and disadvantages are presented.

Rice straw enhancing catalysis of Pseudomonas fluorescens lipase for synthesis of citronellyl acetate

Citronellyl acetate as an important flavor, can be effectively synthesized by lipase catalysis in nonaqueous system. But lipases usually behave low catalytic activity due to aggregation and denaturation of them in organic phase. To enhance the nonaqueous catalysis, based on the mechanism of lipases activated at water/oil (organic phase) interface, the inexpensive race straw was processed into powder and filaments on which Pseudomonas fluorescens lipase was immobilized by physical adsorption, used for synthesis of citronellyl acetate via transesterification of citronellol and vinyl acetate. Results showed that the desired loading was 10 mg lipase immobilized on 30 mg rice straw filaments or 25 mg rice straw powder. When the two immobilized lipases were employed in the reaction system consisted of 1-mL citronellol and 2-mL vinyl acetate at 37 ℃ and 160 rpm, the conversions all reached 99.8% after 12 h. Under the reaction condition, the conversion catalyzed by 10 mg native lipase was 85.1%. Undergoing six times of 8-h reuses in the organic system, the filament and power immobilized lipases had weak activity attenuation rates 0.36 and 0.32% h^-1, lower than 1.52% h^-1 of native lipase. Even at the room temperature and the static state without shaking and stirring, the rice straw filaments immobilized lipase could brought conversion 62.9% after 10 h but the native lipase only gave 37.0%. Obviously, the rice straw, especially its filaments, is an inexpensive and available natural material to prepare immobilized lipase with desired catalysis in organic phase, meant significant potential in flavor industry.

Current Status and Future Perspectives of Supports and Protocols for Enzyme Immobilization

The market for industrial enzymes has witnessed constant growth, which is currently around 7% a year, projected to reach $10.5 billion in 2024. Lipases are hydrolase enzymes naturally responsible for triglyceride hydrolysis. They are the most expansively used industrial biocatalysts, with wide application in a broad range of industries. However, these biocatalytic processes are usually limited by the low stability of the enzyme, the half-life time, and the processes required to solve these problems are complex and lack application feasibility at the industrial scale. Emerging technologies create new materials for enzyme carriers and sophisticate the well-known immobilization principles to produce more robust, eco-friendlier, and cheaper biocatalysts. Therefore, this review discusses the trending studies and industrial applications of the materials and protocols for lipase immobilization, analyzing their advantages and disadvantages. Finally, it summarizes the current challenges and potential alternatives for lipases at the industrial level.

Robust nanocarriers to engineer nanobiocatalysts for bioprocessing applications

The synergistic integration of bio-catalysis engineering with nanostructured materials, as unique multifunctional carrier matrices, has emerged as a new interface of nanobiocatalysis (NBC). NBC is an emerging innovation that offers significant considerations to expand the designing and fabrication of robust catalysts at the nanoscale with improved catalytic characteristics for multipurpose bioprocessing applications. In addition, nanostructured materials with unique structural, physical, chemical, and functional entities have manifested significant contributions in mimicking the enzyme microenvironment. A fine-tuned enzyme microenvironment with an added-value of NBC offers chemo- regio- and stereo- selectivities and specificities. Furthermore, NBC is growing rapidly and will become a powerful norm in bio-catalysis with much controlled features, such as selectivity, specificity, stability, resistivity, induce activity, reaction efficacy, multi-usability, improved mass transfer efficiency, high catalytic turnover, optimal yield, ease in recovery, and cost-effectiveness. Considering the above critics and unique structural, physicochemical, and functional attributes, herein, we present and discuss advances in NBC and its bioprocessing applications in different fields. Briefly, this review is focused on four parts, i.e., (1) NBC as a drive towards applied nanobiocatalysts (as an introduction with opportunities), (2) promising nanocarriers to develop nanobiocatalysts, (3) applications in the fields of biotransformation, biofuel production, carbohydrate hydrolysis, bio-/nanosensing, detergent formulations, and extraction and purification of value-added compounds, and (4) current challenges, concluding remarks, and future trends.

Biosynthesis of benzyl cinnamate using an efficient immobilized lipase entrapped in nano-molecular cages

To improve the performance of lipase in biosynthesis of benzyl cinnamate, a new immobilized lipase by entrapping enzyme into nano-molecular cages was designed. Consequently, the entrapped lipase showed a robust immobilization, which diminished the leakage of lipase notably in use. Moreover, the entrapped lipase exhibited higher activity (57.1 U/mg) than free lipase (50.0 U/mg), demonstrating that the native conformation of lipase was not destroyed during immobilization. Compared with the adsorbed lipase (half-life 40.7 min) and free lipase (half-life 29.8 min), the entrapped lipase (half-life 85.3 min) increased the stability by about 2-3 times. Furthermore, the entrapped lipase was applied in biosynthesis of benzyl cinnamate, where it showed excellent activity and re-usability. After 7 cycles, the yield of benzyl cinnamate catalyzed by the entrapped lipase remained 70.2%, while the yield catalyzed by the adsorbed lipase was only about 10%. These results indicated that the nano-molecular cages could inhibit denaturation of lipase and maintain its activity well.

Designing of Nanomaterials-Based Enzymatic Biosensors: Synthesis, Properties, and Applications

Among the many biological entities employed in the development of biosensors, enzymes have attracted the most attention. Nanotechnology has been fostering excellent prospects in the development of enzymatic biosensors, since enzyme immobilization onto conductive nanostructures can improve characteristics that are crucial in biosensor transduction, such as surface-to-volume ratio, signal response, selectivity, sensitivity, conductivity, and biocatalytic activity, among others. These and other advantages of nanomaterial-based enzymatic biosensors are discussed in this work via the compilation of several reports on their applications in different industrial segments. To provide detailed insights into the state of the art of this technology, all the relevant concepts around the topic are discussed, including the properties of enzymes, the mechanisms involved in their immobilization, and the application of different enzyme-derived biosensors and nanomaterials. Finally, there is a discussion around the pressing challenges in this technology, which will be useful for guiding the development of future research in the area.

Evaluating enzyme stabilizations in calcium carbonate: Comparing in situ and crosslinking mediated immobilization

Enzyme immobilization using inorganic materials has been shown to preserve enzyme activity improving and improve their practical applications in biocatalytic process designs. Proper immobilization methods have been used to obtain high recycling and storage stability. In this study, we compared the activity and stability of in situ or crosslink-immobilized enzymes in a CaCO₃ biomineral carrier. More than 30% of the initial enzyme activity was preserved for both the systems after 180 days upon 15 activity measurements at room temperature, confirming the improved stability of these enzyme systems (100 mM phosphate buffer, pH 8.0); however, differences in enzyme loading, activity, and characteristics were observed for each of these methods. Each system exhibited efficacy of 80% and 20%, respectively. Based on the same amount of immobilized enzyme (0.2 mg), the specific activities of hydrolysis of p-nitrophenyl butyrate substrate at room temperature of in situ immobilized carboxyl esterase (CE) and crosslinked CE were 11.37 and 7.63 mM min^-1 mg^-1, respectively (100 mM phosphate buffer, pH 8.0). Moreover, based on the kinetic behavior, in situ immobilized CE exhibited improved catalytic efficiency (Vmax Km^-1) of the enzyme, exhibiting 4-fold higher activity and efficiency values than those of the CE immobilized in CaCO₃. This is the first study to describe the stabilization of enzymes in CaCO₃ and compare the enzyme kinetics and efficiencies between in situ immobilization and crosslinking in CaCO₃ carriers.