Facile preparation and characterization of super tough chitosan/poly(vinyl alcohol) hydrogel with low temperature resistance and anti-swelling property

Multifunctional polyvinyl alcohol/poly-dopamine hydrogels loaded with bio-nano composites promote wound healing by repairing endogenous electric fields

In this paper, a heart-shaped nanocomposite (MXenen@Cu-MOF, MC) has been prepared by hydrothermal method. This material can effectively prevent the accumulation of MXene, improve the material's electrical conductivity and antibacterial properties. In addition, it is loaded into Polyvinyl alcohol/Poly-dopamine hydrogel wound dressings (PPMC), which can effectively destroy bacterial biofilms and provide a new pathway for internal electrical currents, helping to repair internal electric fields and promote wound healing. Through the concentration gradient experiments of hydrogel such as antibacterial, conductive, hemolysis and cell migration, we believe that the addition of MC can improve the basic properties of hydrogel. Among them, PPMC0.2 is the hydrogel with the best performance under the premise of meeting bio-compatibility. Its resistance, between 500 and 1000 Ω, is lower than the skin resistance at the wound site and provides the basis for the passage of current through the body. In addition, the cell mobility (24h) of PPMC0.2 reached 58%, and the wound healing rate (6day) was 81.84%, which was much higher than that of other experimental groups. The experimental results proved that PPMC hydrogel can promote wound healing, and this study also provided a new therapeutic idea for chronic wound healing.

Strong, tough and anisotropic bioinspired hydrogels

Soft materials are widely used in tissue engineering, soft robots, wearable electronics, etc. However, it remains a challenge to fabricate soft materials, such as hydrogels, with both high strength and toughness that are comparable to biological tissues. Inspired by the anisotropic structure of biological tissues, a novel solvent-exchange-assisted wet-stretching strategy is proposed to prepare anisotropic polyvinyl alcohol (PVA) hydrogels by tuning the macromolecular chain movement and optimizing the polymer network. The reinforcing and toughening mechanisms are found to be "macromolecule crystallization and nanofibril formation". These hydrogels exhibit excellent mechanical properties, such as extremely high fracture stress (12.8 ± 0.7 MPa) and fracture strain (1719 ± 77%), excellent modulus (4.51 ± 0.76 MPa), high work of fracture (134.47 ± 9.29 MJ m-3), and fracture toughness (305.04 kJ m-2) compared with other strong hydrogels and even natural tendons. In addition, excellent conductivity, strain sensing capability, water retention, freezing resistance, swelling resistance, and biocompatibility can also be achieved. This work provides a new and effective method to fabricate multifunctional anisotropic hydrogels with high tunable strength and toughness with potential applications in the fields of regenerative medicine, flexible sensors, and soft robotics.

Poly (vinyl alcohol)/sodium alginate/carboxymethyl chitosan multifunctional hydrogel loading HKUST-1 nanoenzymes for diabetic wound healing

Bacterial infection, hyperinflammation and hypoxia, which can lead to amputation in severe cases, are frequently observed in diabetic wounds, and this has been a critical issue facing the repair of chronic skin injuries. In this study, a copper-based MOF (TAX@HKUST-1) highly loaded with taxifolin (TAX) with a drug loading of 41.94 ± 2.60 % was prepared. In addition, it has excellent catalase activity, and by constructing an oxygen-releasing hydrogel (PTH) system with calcium peroxide (CaO2), it can be used as a nano-enzyme to promote the generation of oxygen from hydrogen peroxide (H2O2) to provide sufficient oxygen to the wound, and at the same time, solve the problem of the oxidative stress damage caused by excess H2O2 to the cells during the oxygen-releasing process. On the other hand, TAX and HKUST-1 in PTH synergistically promoted antimicrobial and anti-oxidative stress properties, and the bacterial inhibition rate against Staphylococcus aureus and Escherichia coli reached 90 %. In vivo experiments have shown that PTH hydrogel is able to treat diabetic skin repair by inhibiting the expression of inflammation-related proteins and promoting epidermal neogenesis, angiogenesis and collagen deposition.

Preparation of novel polyvinyl alcohol-carbon nanotubes containing imidazolyl ionic liquid/chitosan hydrogel for highly efficient uranium extraction from seawater

A novel polyvinyl alcohol-carbon nanotube containing an imidazolyl ionic liquid/chitosan composite hydrogel (termed CBCS) was prepared for highly selective uranium adsorption from seawater. The results show that CBCS has good adsorption properties for uranium within the pH range of 5.0-8.0. Kinetics and thermodynamics experiments show that the theoretical maximum adsorption capacity of CBCS to U(VI) is 496.049 mg/g (288 K, pH = 6.0), indicating a spontaneous exothermic reaction. Mechanism analysis shows that the hydroxyl group, amino group, and CN bond on the surface of CBCS directly participate in uranium adsorption and that the dense pores on the surface of CBCS play an important role in uranium adsorption. The competitive adsorption experiment shows that CBCS has excellent uranium adsorption selectivity. In addition, CBCS exhibits good reusability. After five adsorption-desorption cycles, the uranium adsorption rate of CBCS can still reach >98 %. Hence, CBCS has excellent potential for uranium extraction from seawater.

Polyvinyl alcohol/phytic acid/phosphorylated chitosan hydrogel electrode highly efficient electroadsorption of low concentration uranium from uranium tailings leachate

In order to improve the removal rate of uranium and reduce the harm of radioactive pollution, a physically crosslinked polyvinyl alcohol/phosphorylated chitosan (PPP) hydrogel electrode was designed by freezing thawing method. The results show that PPP hydrogel has a good adsorption effect on uranium, and 200 mL of uranium tailings leachate is absorbed, and the treatment efficiency reaches 100 % within 15 min. PPP hydrogel can adapt to a wide range of pH conditions and exhibit excellent adsorption efficiency in the range of 3-9. At the same time, PPP hydrogel maintains an adsorption efficiency of over 85 % for 950 mg/L uranium solution. This lays the foundation for the practical application of PPP hydrogel. In addition, PPP hydrogel also exhibits good repeatability, after 7 cycles, the material still retains 95 % of its initial performance. The synergistic effect of various functional groups such as phosphate, hydroxyl, and ammonium in the material is the main mechanism of PPP's adsorption capacity for uranium. Furthermore, electrochemical adsorption method significantly enhances the adsorption performance of PPP hydrogel.

An effective DLP 3D printing strategy of high strength and toughness cellulose hydrogel towards strain sensing

Photocurable 3D printing technology has outperformed extrusion-based 3D printing technology in material adaptability, resolution, and printing rate, yet is still limited by the insecure preparation and selection of photoinitiators and thus less reported. In this work, we developed a printable hydrogel that can effectively facilitate various solid or hollow structures and even lattice structures. The chemical and physical dual-crosslinking strategy combined with cellulose nanofibers (CNF) significantly improved the strength and toughness of photocurable 3D printed hydrogels. In this study, the tensile breaking strength, Young's modulus, and toughness of poly(acrylamide-co-acrylic acid)_D/cellulose nanofiber (PAM-co-PAA)_D/CNF hydrogels were 375 %, 203 % and 544 % higher than those of the traditional single chemical crosslinked (PAM-co-PAA)_S hydrogels, respectively. Notably, its outstanding compressive elasticity enabled it to recover under 90 % strain compression (about 4.12 MPa). Resultantly, the proposed hydrogel can be utilized as a flexible strain sensor to monitor the motions of human movements, such as the bending of fingers, wrists, and arms, and even the vibration of a speaking throat. The output of electrical signals can still be collected through strain even under the condition of energy shortage. In addition, photocurable 3D printing technology can provide customized services for hydrogel-based e-skin, such as hydrogel-based bracelets, fingerstall, and finger joint sleeves.

Janus Hydrogel to Mimic the Structure and Property of Articular Cartilage

Designing hydrogels with adequate strength, remarkable swelling resistance, low friction coefficient, excellent biocompatibility, and osseointegration potential is essential for replacing articular cartilage. However, it remains challenging to integrate all these properties into one material. In this work, a Janus hydrogel was prepared from polyvinyl alcohol, chitosan, and sodium hyaluronate, followed by a one-sided dipping in situ precipitation mineralization to form a layer of hybridized hydroxyapatite (HAp), wherein the two surfaces had distinct compositions and functions. Because of the negative carboxyl groups from sodium hyaluronate, the top surface possessed a friction coefficient as low as 0.024. On account of the HAp mineralized layer, the bottom side had osteogenesis potential. Owing to the synergy of physical linkages, the hydrogel displayed compressive strength as high as 78 MPa. Furthermore, it demonstrated remarkable swelling resistance with strength retention near 100% even after soaking in PBS solution at 37 °C for 7 days. The absence of toxic chemicals maintained the merits of starting polymers and resulted in excellent biocompatibility (cell viability ≈ 100%), making it an ideal substitute for articular cartilage.

Tough Engineering Hydrogels Based on Swelling-Freeze-Thaw Method for Artificial Cartilage

Articular cartilage, which exhibits toughness and ultralow friction even under high squeezing pressures, plays an important role in the daily movement of joints. However, joint soft tissue lesions or injuries caused by diseases, trauma, or human functional decline are inevitable. Poly(vinyl alcohol) (PVA) hydrogels, which have a water content and compressive strength similar to those of many tissues and organs, have the potential to replace tough connective tissues, including cartilage. However, currently, PVA hydrogels are not suitable for complex dynamic environments and lack rebound resilience, especially under long-term or multicycle mechanical loads. Inspired by biological tissues that exhibit increased mechanical strength after swelling, we report a tough engineered hydrogel (TEHy) fabricated by swelling and freeze-thaw methods with a high compressive strength (31 MPa), high toughness (1.17 MJ m^-3), a low friction coefficient (0.01), and a low energy loss factor (0.22). Notably, the TEHy remained remarkably resilient after 100 000 cycles of contact extrusion and remains intact after being compressed by an automobile with a weight of approximately 1600 kg. The TEHy also exhibited excellent water swelling resistance (volume and weight changes less than 5%). Moreover, skeletal muscle cells were able to readily attach and proliferate on the surface of TEHy-6, suggesting its outstanding biocompatibility. Overall, this swelling and freeze-thaw strategy solves the antifatigue and stability problems of PVA hydrogels under large static loads (>10 000 N) and provides an avenue to fabricate engineering hydrogels with strong antifatigue and antiswelling properties and ultralow friction for potential use as biomaterials in tissue engineering.

Super-Strong, Nonswellable, and Biocompatible Hydrogels Inspired by Human Tendons

Fabricating artificial materials that mimic the structures and properties of tendons is of great significance. Possessing a tensile stress of approximately 10.0 MPa and a water content of around 60%, human tendons exhibit excellent mechanical properties to support daily functions. In contrast to tendons, most synthetic hydrogels with similar water content typically exclude qualified strength, swelling resistance, and biocompatibility. Herein, a facile strategy based on poly(vinyl alcohol) (PVA) and tannic acid (TA) is demonstrated to tackle this problem via a combination of sequential steps including freezing-thawing PVA aqueous solutions to form crystalline regions, prestretching and air drying in confined conditions to induce anisotropic structures, soaking in TA solutions to form multiple hydrogen bondings between PVA and TA, and finally dialyzing against water for the removal of residual TA molecules and the rearrangements and homogenization of multiple hydrogen bonds. The obtained PVA hydrogels possess hierarchically anisotropic structures, where the alignment of PVA bundles promotes high modulus, while the hydrogen bonding between PVA and TA endows them with an energy dissipation mechanism. Benefitting from the synergy of material composition and structural engineering, the obtained hydrogel displays super-strong mechanics (a tensile stress of 19.3 MPa and a toughness of 32.1 MJ/m³), outperforming most tough hydrogels. Remarkably, this hydrogel demonstrates excellent swelling resistance. It barely expands after immersion in deionized water, phosphate-buffered saline (PBS), and SBF aqueous solutions for 7 days with the strength and volume nearly the same as their initial values. All of the features, combined with excellent cytocompatibility, make it an ideal material for biotechnological and biomedical applications.

Ionic liquids enable the preparation of a copper-loaded gel with transdermal delivery function for wound dressings

Antibacterial hydrogel dressings play an important role in wound healing and infection treatment. The majority of hydrogels are obtained through chemical cross-linking and complex synthesis or processing. Copper ions (Cu²⁺) have been involved in sterilization; however, their direct use may lead to high local concentrations and heavy metal toxic side effects. Herein, dopamine (DA) was polymerized in situ along a polyvinyl alcohol (PVA) chain and chelated copper ions (Cu²⁺) to form a mixture. Ionic liquid (IL) choline-glycolate (CGLY) was added to the mixture to form an ionic gel. CGLY promotes gel formation through intermolecular hydrogen bonds with the polymer chains and avoids the use of toxic chemical crosslinking agents. Meanwhile, CGLY can also promote the release of Cu²⁺ and generate hydrogel free radicals (˙OH) in the wound through chemodynamic therapy to kill drug-resistant bacteria. In addition, the excellent transdermal property of CGLY enables the released Cu²⁺ to stimulate cell migration and accelerate wound healing. The gel exhibits favorable biocompatibility and its use has been demonstrated in skin infection therapy of mice.

Ag@MOF-loaded chitosan nanoparticle and polyvinyl alcohol/sodium alginate/chitosan bilayer dressing for wound healing applications

In this paper, Ag-Metal-organic framework loaded chitosan nanoparticles (0.1%Ag@MOF/1.5%CSNPs) and polyvinyl alcohol/sodium alginate/chitosan (PACS) were used as the upper and lower layers to successfully prepare a bilayer composite dressing for wound healing. The performance of bilayer dressing was evaluated. The lower layer (PACS) had uniform pore size distribution, good water retention, swelling, water vapor permeability, and biocompatibility while PACS had almost no antibacterial activity. The upper layer (Ag@MOF/CSNPs) possessed excellent antibacterial activity and poor biocompatibility. As the upper layer, it can avoid direct contact with the skin and inhibit microbial invasion. In addition, the bilayer can adhere to a large number of red blood cells and platelets, promoting blood coagulation and cell proliferation. Ag@MOF, CSNPs, Ag@MOF/CSNPs and bilayer showed antibacterial activity in ascending order, due to the synergistic antibacterial action of the upper and lower layer. In vivo evaluation showed that both bilayer and PACS could significantly accelerate the wound healing, and the bilayer dressing showed more complete re-epithelialization with less inflammatory cells. In summary, this new bilayer composite is an ideal dressing for accelerating wound healing.