Physicochemical and functional properties of isolated starch and their correlation with flour from the Andean Peruvian quinoa varieties

Combined effects of high hydrostatic pressure and pulsed electric fields on quinoa starch: Analysis of microstructure, morphology, thermal, and pasting properties

The aim of this study was to evaluate the impact of non-thermal methods, using high hydrostatic pressure (HHP) and pulsed electric field (PEF), on the dual modification of quinoa starch and to analyze the microstructural, morphological, thermal, pasting, and texture properties. Starch was treated with HHP at 400 MPa for 10 min, while PEF was applied using voltages of 10 and 30 kV cm-1 for a total time of 90s. The modification techniques were effective in breaking down amylose molecules and amylopectin branches, where for the dual treatment, higher values of DP6-12 were found. The average diameter and gelatinization temperatures were elevated after HHP, thus forming clusters that require more energy for paste formation. The use of 30 kV cm-1 and 400 MPa (HP30) in starch facilitates the creation of new food products with better texture, stability and nutritional value, making them suitable for use in food emulsions and the cosmetics industry.

Current trends and prospects in quinoa research: An approach for strategic knowledge areas

Currently, the demand for healthy consumption and the use of alternatives to dairy proteins for the development of foods with good nutritional value are growing. Quinoa has received much attention because it contains a high content of proteins, essential amino acids, essential fatty acids, minerals, vitamins, dietary fibers, and bioactive compounds. Nevertheless, this content and the bioavailability of specific compounds of interest are related to the genotype, the agri-environmental conditions, and management practices where quinoa is grown and postharvest management. This article aimed to analyze the research trends for three knowledge areas: quinoa plant breeding for nutraceutical properties, plant-soil relations focused on abiotic stresses, and postharvest and value-added transformation activities. To this end, a specific methodological design based on bibliometrics and scientometrics methods was used. Through these analyses based on publications' keywords, titles, abstracts, and conclusions sections, for each knowledge area, the key research trends (scope and main topics), the classification of trends based on their development and relevance degree, and the core of knowledge were established. The trends comprise the current state of research. Finally, analyzing the conclusions, recommendations, and future research sections of key publications, a strong correlation among plant breeding research to obtain varieties with tolerance to biotic and abiotic stresses, nutritional and functional compounds of interest for food safety, and the development of products with higher added value established interest in further research on the potential bioactivity of quinoa and the verification of health benefits to humans.

Red rice starch modification - Combination of the non-thermal method with a pulsed electric field (PEF) and enzymatic method using α-amylase

The objective of this study was to investigate the dual modification of red rice starch using pulsed electric field (PEF) and α-amylase, focusing on morpho-structural, thermal, and viscoamylographic properties. Native starch (Control) underwent various treatments: PEF at 30 kV cm-1 (PEF30), α-amylase at 9.0 U mg-1 (AA0), and a combination of both (PEF30 + α and α + PEF30). The PEF30 + α treatment exhibited the highest degree of digestion (10.66 %) and resulted in morphological changes in the starch granules, which became elongated and curved, with an increased average diameter of 50.49 μm compared to the control. The starch was classified as type A, with a maximum reduction in crystallinity of up to 21.17 % for PEF30. The deconvolution of FT-IR bands indicated an increase in the double helix degree (DDH) for PEF30 and AA0, while the degree of order (DO) was reduced for PEF30, AA0, and PEF30 + α. DSC analysis revealed significant modifications in gelatinization temperatures, particularly for PEF30, and these changes were supported by a reduction in gelatinization enthalpy (ΔH) of up to 28.05 % for AA0. These findings indicate that both individual and combined treatments promote a decrease in starch gelatinization and facilitate the process, requiring less energy. Differences were observed between the formulations subjected to single and alternating dual treatments, highlighting the influence of the order of PEF application on the structural characteristics of starch, especially when applied before the enzymatic treatment (PEF + α). Regarding the viscoamylographic parameters, it was observed that AA0 presented higher values than the control, indicating that α-amylase enhances the firmness of the paste. The double modification with PEF + α was more effective in reducing syneresis and starch retrogradation, leading to improvements in paste properties. This study provided significant insights into the modification of red rice starch using an efficient and environmentally friendly approach.

Toward the Development of Potentially Healthy Low-Energy-Density Snacks for Children Based on Pseudocereal and Pulse Flours

The main objective of this study was the development of gluten-free cracker-type snacks with a balanced supply of essential amino acids, a lower glycemic index, and a lower caloric intake that were sensorially acceptable. For this purpose, chickpea flour was replaced by quinoa (10, 20, 30, 40, and 50%) and the fat was partially (75%) replaced by chicory inulin. The flours were characterized in terms of their proximate composition, individual mineral content, particle size distribution, and functional properties. The parameters analyzed for the crackers, once baked, were the water content, water activity, weight, dimensions, color, and texture. A sensory analysis was performed as well, using the formulations containing 50% chickpea flour and 50% quinoa flour (g/100 g flour), with and without inulin, as well as those made with 100% chickpea flour. From the analysis of the raw flours, it can be concluded that snack products developed from them could be a nutritive option for children, in terms of the protein, magnesium, and fiber content. The functional properties revealed that both flours are suitable for producing doughs and baked products. The obtained results indicate that snacks made with 50% quinoa flour (g/100 g flour) and 75% chicory inulin (g/100 g high oleic sunflower oil) could be an interesting alternative for children as, in addition to offering a very interesting nutritional contribution, the energy intake from fat is reduced by 57%.

Research Progress of Quinoa Seeds (Chenopodium quinoa Wild.): Nutritional Components, Technological Treatment, and Application

Quinoa (Chenopodium quinoa Wild.) is a pseudo-grain that belongs to the amaranth family and has gained attention due to its exceptional nutritional properties. Compared to other grains, quinoa has a higher protein content, a more balanced amino acid profile, unique starch features, higher levels of dietary fiber, and a variety of phytochemicals. In this review, the physicochemical and functional properties of the major nutritional components in quinoa are summarized and compared to those of other grains. Our review also highlights the technological approaches used to improve the quality of quinoa-based products. The challenges of formulating quinoa into food products are addressed, and strategies for overcoming these challenges through technological innovation are discussed. This review also provides examples of common applications of quinoa seeds. Overall, the review underscores the potential benefits of incorporating quinoa into the diet and the importance of developing innovative approaches to enhance the nutritional quality and functionality of quinoa-based products.

Starch-based controlled release fertilizers: A review

Starch, as a widely available renewable resource, has the potential to be used in the production of controlled-release fertilizers (CRFs) that support sustainable agriculture. These CRFs can be formed by incorporating nutrients through coating or absorption, or by chemically modifying the starch to enhance its ability to carry and interact with nutrients. This review examines the various methods of creating starch-based CRFs, including coating, chemical modification, and grafting with other polymers. In addition, the mechanisms of controlled release in starch-based CRFs are discussed. Overall, the potential benefits of using starch-based CRFs in terms of resource efficiency and environmental protection are highlighted.

Effects of microwave and conventional heating on physicochemical, digestive, and structural properties of debranched quinoa starch-oleic acid complexes with different water addition

BACKGROUND

A starch-lipid complex is a new type of resistant starch, which is of great importance for the prevention of chronic diseases such as diabetes. Most starch-lipid complexes usually need to be treated by heating to make them suitable for a variety of applications, and starch-based foods are generally not edible without a heat-treatment process. However, the digestion and structural properties of the starch-lipid complex will be changed after heating. In this study, microwave and conventional heating were used to treat debranched quinoa starch-oleic acid complexes (DQS-OA) with different water addition conditions, and the effects of the two methods on the physicochemical, digestive, and structural properties of DQS-OA were compared.

RESULTS

The results of in vitro digestibility showed that the resistant starch content (235.34-269.55 g kg^-1 ) of the conventional heating-treated samples was significantly higher than that the microwave-treated samples (141.51-157.99 g kg^-1 ). Moreover, after microwave treatment, the short-range molecular order and crystalline structure of DQS-OA were destroyed and the particle size became smaller. In contrast, the thermal stability, enthalpy, and crystallinity of the complexes after conventional heating were improved. The ratio at 1047/1022 cm^-1 of complexes has also been increased.

CONCLUSION

This study demonstrated that conventional water-bath heating was better than microwave heating in increasing digestion resistance, improving the short-range and long-range molecular order, and promoting the formation of DQS-OA. With an increase in water addition, the influence of microwave or water-bath treatment on the properties of DQS-OA became greater. © 2022 Society of Chemical Industry.

Effects of NaCl and sucrose on the structural and functional properties of debranched quinoa starch-oleic acid complexes under baking

The effects of different dosage of NaCl and sucrose on the structural and functional properties of debranched quinoa starch-oleic acid complexes (DQS-OA) under baking were investigated. The results showed that the resistant starch content of the baked DQS-OA increased by 17.15 % than DQS-OA. The addition of NaCl destroyed the thermal stability, short-range molecular order and crystalline structure of the complexes. The results of particle size, SEM and amylose content showed that NaCl accelerated the degradation of starch granules, which reduced the enzyme resistance of starch. In contrast, the enthalpy (7.28 J/g-7.78 J/g) and crystallinity (54.29 %-56.69 %) of the samples with sucrose significantly increased, and the molecular structure of the complexes became more ordered. Furthermore, with the increase of sucrose concentration, the resistant starch content also increased from 28.80 % to 31.41 %.

Advances in isolation, characterization, modification, and application of Chenopodium starch: A comprehensive review

The Chenopodium genus includes >250 species, among which only quinoa, pigweed, djulis, and kaniwa have been explored for starches. Chenopodium is a non-conventional and rich source of starch, which has been found effective in producing different classes of food. Chenopodium starches are characterized by their smaller granule size (0.4-3.5 μm), higher swelling index, shorter/lower gelatinization regions/temperature, good emulsifying properties, and high digestibility, making them suitable for food applications. However, most of the investigations into Chenopodium starches are in the primary stages (isolation, modification, and characterization), except for quinoa. This review comprehensively explores the major developments in Chenopodium starch research, emphasizing isolation, structural composition, functionality, hydrolysis, modification, and application. A critical analysis of the trends, limitations, and scope of these starches for novel food applications has also been provided to promote further scientific advancement in the field.

Textural and sensory characteristics of sugar-free biscuit formulated with quinoa flour, isomalt, and maltodextrin

A low-calorie biscuit formulation containing quinoa flour (cultivars TTKK), isomalt, and maltodextrin was optimized using response surface methodology. Optimized samples were evaluated in terms of total phenolic compounds (TPC), sensory properties, and nutritional value while samples containing only wheat flour (Pishgam var.) and sucrose were used as control. Morphology of isolated starch from quinoa was also investigated. The results showed that with increasing amounts of quinoa, isomalt, and maltodextrin ΔE and Browning index increased, whereas hardness and L values decreased. The formulation containing 25% quinoa flour, 3.5% maltodextrin, and 10% isomalt was found to be optimal with an overall desirability value of 0.95. The sensory evaluation showed that replacement of wheat flour with 25 g/100 g quinoa flour in biscuits was acceptable. TPC of the optimal biscuit (1,180.34 ± 0.02 μg GAE/g) was higher than that of the control sample (729.95 ± 0.007 μg GAE/g). In addition, the optimized biscuit had more protein (8.36 ± 0.035%) and dietary fiber (2.14 ± 0.035%) content compared with the control sample (7.01 ± 0.007% and 1.66 ± 0.028%, respectively). The consumption of 100 g of optimized quinoa biscuits supplies the daily requirement of Fe, Mg, Ca, and Zn at 2.43%, 44.81%, 19.46% and 1.12%, respectively.

Analysis of Sour Porridge Microbiota and Improvement of Cooking Quality via Pure Culture Fermentation Using Lacticaseibacillus paracasei Strain SZ02

The microbial composition of sour porridge at different fermentation times was analyzed through high-throughput sequencing, and a pure culture fermentation process was established to optimize production process and improve the edible quality of the porridge. In natural fermentation, Firmicutes and Proteobacteria were abundant throughout the process. Specifically, Aeromonas, Acinetobacter, and Klebsiella were dominant on fermentation days 1–5 (groups NF-1, NF-3, and NF-5), while Lactobacillus and Acetobacter gradually became the dominant bacteria on fermentation day 7 (group NF-7). Further, we isolated one strain of acid-producing bacteria from sour porridge, identified as Lacticaseibacillus paracasei by 16SrRNA sequencing and annotated as strain SZ02. Pure culture fermentation using this strain significantly increased the relative starch and amylose contents of the porridge, while decreasing the lipid, protein, and ash contents (P < 0.05). These findings suggest that sour porridge produced using strain SZ02 has superior edible qualities and this strategy may be exploited for its industrial production.

Characteristics of Newly Developed Extruded Products Supplemented with Plants in a Form of Microwave-Expanded Snacks

The following research focuses on the possibility of applying fresh plant material as a carrot pulp to supplement newly developed extruded products in the form of pellets and microwave-expanded snacks. Fresh carrot pulp, as a valuable vegetable ingredient, was used in the amount of 2.5 g/100 g to 30.0 g/100 g in a potato-based recipe. The snack pellets were processed via extrusion-cooking, using a single-screw extruder with a plasticizing unit L/D = 18, and the use of variable screw speeds. The produced pellets underwent microwave expansion to limit the fat content, so as to produce ready-to-eat (RTE) snacks. The pellets and snacks were tested for nutritional value, as well as for selected quality features: physical properties, structure, pasting characteristics, and texture profile, and PCA analysis and a correlation matrix were performed on the obtained results. Microwave expansion of pellets increased the total phenolic content, the antioxidant activity, water absorption index and lightness of snacks, but decreased the bulk density and setback values of the expanded products when compared to pellets. Generally, we found that it was possible to use up to 30.0 g/100 g of fresh carrot pulp with a positive effect on nutritional value, and without negative effects on the physical properties of extruded products. Both the extrusion-cooking and microwave expansion can minimize the negative impact on plant materials, due to the short processing time.