Facile fabrication of silver on magnetic nanocomposite (Fe3O4@Chitosan –AgNP nanocomposite) for catalytic reduction of anthropogenic pollutant and agricultural pathogens

Green-Synthesized Characterization, Antioxidant and Antibacterial Applications of CtAC/MNPs-Ag Nanocomposites

The emergence of antibiotic resistance, caused by the improper use of antibiotics, is a significant challenge in combating infectious diseases, leading to millions of annual fatalities. The occurrence of antimicrobial side effects catalyzes the investigation of novel antimicrobial compounds and sources of drugs. Consequently, the research on biological activity that is conducted on plants, plant extracts, and compounds that are produced from plant components is of utmost significance. In this study, CtAC/MNPs were obtained by the reaction of activated carbon (AC) obtained from the fruits of the Celtis tournefortii (Ct) plant and magnetic nanoparticles (MNPs), and a CtAC/MNPs-Ag nanocomposite was synthesized by the reduction in silver ions added to the reaction. The synthesized CtAC/MNPs and CtAC/MNPs-Ag nanocomposites were analyzed spectroscopically (FTIR, XRD), microscopically (SEM, EDX), optically (DLS), electrochemically (zeta potential) and magnetically (VSM). The antibacterial activities of CtAC/MNPs and CtAC/MNPs-Ag nanocomposites against S. aureus and E. coli were investigated by microdilution method using minimal inhibitory concentration (MIC) and disk diffusion methods. Antioxidant activity study, including total phenolic content and DPPH and cuprac assays, revealed the remarkable effect of the CtAC/MNPs-Ag nanocomposite. This study has the advantages of obtaining CtAC/MNPs and CtAC/MNPs-Ag nanocomposites in a short time without requiring energy, and most importantly, the reaction takes place without using any toxic substances. In addition, according to the data obtained in the study, the CtAC/MNPs-Ag nanocomposite is thought to shed light on biomedical research.

Bactericidal, anti-biofilm, anti-oxidant potency and catalytic property of silver nanoparticles embedded into functionalised chitosan gel

Chitosan is a versatile biocompatible polysaccharide which has attracted great attention for gel synthesis. Its reducing character is specifically exploited for nanoparticle synthesis via green approach. A silver nanocomposite synthesized using this gel, with a novel gelling agent 2,4,6-trihydroxy benzaldehyde, was found to be a promising candidate for several applications including anti-bacterial, anti-biofilm and anti-oxidant activity as well as catalysis. The nanocomposite was well characterized using various spectroscopic and microscopic techniques such as IR, TGA, XRD, XPS, SEM and TEM. The nanocomposite exhibited high bactericidal activity against both S. aureus and E. coli. Further, it was evaluated for anti-biofilm forming property and its potency as antioxidant agent. The nanocomposite served as a catalyst for degradation of Methyl Orange and Rhodamine B at high concentrations (in the range of mM) with a catalytic efficiency of 98.58 % and 99.56 % within 3 min and 5 min respectively.

Catalytic innovations: Improving wastewater treatment and hydrogen generation technologies

The effective reduction of hazardous organic pollutants in wastewater is a pressing global concern, necessitating the development of advanced treatment technologies. Pollutants such as nitrophenols and dyes, which pose significant risks to both human and aquatic health, making their reduction particularly crucial. Despite the existence of various methods to eliminate these pollutants, they are not without limitations. The utilization of nanomaterials as catalysts for chemical reduction exhibits a promising alternative owing to their distinguished catalytic activity and substantial surface area. For catalytically reducing the pollutants NaBH4 has been utilized as a useful source for it because it reduces the pollutants quiet efficiently and it also releases hydrogen gas as well which can be used as a source of energy. This paper provides a comprehensive review of recent research on different types of nanomaterials that function as catalysts to reduce organic pollutants and also generating hydrogen from NaBH4 methanolysis while also evaluating the positive and negative aspects of nanocatalyst. Additionally, this paper examines the features effecting the process and the mechanism of catalysis. The comparison of different catalysts is based on size of catalyst, reaction time, rate of reaction, hydrogen generation rate, activation energy, and durability. The information obtained from this paper can be used to steer the development of new catalysts for reducing organic pollutants and generation hydrogen by NaBH4 methanolysis.

Cellulase-immobilized chitosan-coated magnetic nanoparticles for saccharification of lignocellulosic biomass

Devising and consolidating cost-effective and greener technologies for sustainable energy production pertain to some of the most pressing needs of the present times. Bioconversion of abundantly available lignocellulosic materials into fermentable sugars to produce biofuels involves the cost-extensive requirement of hydrolytic enzymes called cellulases. Cellulases are highly selective and eco-friendly biocatalysts responsible for deconstruction of complex polysaccharides into simple sugars. Currently, immobilization of cellulases is being carried out on magnetic nanoparticles functionalized with suitable biopolymers such as chitosan. Chitosan, a biocompatible polymer, exhibits high surface area, chemical/thermal stability, functionality, and reusability. The chitosan-functionalized magnetic nanocomposites (Ch-MNCs) present a nanobiocatalytic system that enables easy retrieval, separation, and recycling of cellulases, thereby offering a cost-effective and sustainable approach for biomass hydrolysis. These functional nanostructures show enormous potential owing to certain physicochemical and structural features that have been discussed in a comprehensive manner in this review. It provides an insight into the synthesis, immobilization, and application of cellulase immobilized Ch-MNCs for biomass hydrolysis. This review aims to bridge the gap between sustainable utilization and economic viability of employing replenishable agro-residues for cellulosic ethanol production by incorporating the recently emerging nanocomposite immobilization approach.

Synergistic effect of silver NPs immobilized on Fe3O4@L-proline magnetic nanocomposite toward the photocatalytic degradation of Victoria blue and reduction of organic pollutants

The surface of magnetite (Fe₃O₄) nanoparticles was subject to modification through the incorporation of L-proline (LP) by simple co-precipitation method in which silver nanoparticles were deposited by in situ method, thereby yielding the Fe₃O₄@LP-Ag nanocatalyst. The fabricated nanocatalyst was characterized using an array of techniques including Fourier-transform infrared (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometry (VSM), Brunauer-Emmett-Teller (BET), and UV-Vis spectroscopy. The results evince that the immobilization of LP on the Fe₃O₄ magnetic support facilitated the dispersion and stabilization of Ag NPs. The SPION@LP-Ag nanophotocatalyst exhibited exceptional catalytic efficiency facilitating the reduction of MO, MB, p-NP, p-NA, NB, and CR in the presence of NaBH₄. The rate constants obtained from the pseudo-first-order equation were 0.78, 0.41, 0.34, 0.27, 0.45, 0.44, and 0.34 min^-1 for CR, p-NP, NB, MB, MO, and p-NA, respectively. Additionally, the Langmuir-Hinshelwood model was deemed the most probable mechanism for catalytic reduction. The novelty of this study lies in the use of L-proline immobilized on Fe₃O₄ MNPs as a stabilizing agent for the in-situ deposition of silver nanoparticles, resulting in the synthesis of Fe₃O₄@LP-Ag nanocatalyst. This nanocatalyst exhibits high catalytic efficacy for the reduction of multiple organic pollutants and azo dyes, which can be attributed to the synergistic effects between the magnetic support and the catalytic activity of the silver nanoparticles. The easy recyclability and low cost of the Fe₃O₄@LP-Ag nanocatalyst further enhance its potential application in environmental remediation.

Crosslinked modified chitosan biopolymer for enhanced removal of toxic Cr(VI) from aqueous solution

Two new crosslinked modified chitosan biopolymers, namely (CTS-VAN) and (Fe₃O₄@CTS-VAN) bioadsorbents were prepared starting from chitosan and 4-hydroxy-3-methoxybenzaldehyde (VAN) in presence of epichlorohydrin. The analytical techniques FT-IR, EDS, XRD, SEM and XPS besides BET surface analysis were utilized for full characterization of the bioadsorbents. Batch experiments were conducted to study the effect of various influencing parameters in Cr (VI) removal such as initial pH, contact time, adsorbent amount and initial Cr (VI) concentration. The adsorption of Cr (VI) was found out to be maximum at pH = 3 for both bioadsorbents. Langmuir isotherm fit well the adsorption process with a maximum adsorption capacity of 188.68 and 98.04 mg/g for CTS-VAN and Fe₃O₄@CTS-VAN, respectively. The adsorption process followed pseudo second-order kinetics with R² values of 1 and 0.9938 for CTS-VAN and Fe₃O₄@CTS-VAN, respectively. X-ray photoelectron spectroscopy (XPS) analysis showed that Cr(III) accounted for 83 % of the total Cr bound to bioadsorbents surface, which indicated reductive adsorption was responsible for Cr(VI) removal by the bioadsorbents. Cr(VI) was initially adsorbed on the positively charged surface of the bioadsorbents and reduced to Cr(III) by electrons provided by oxygen-comprising functional groups (e.g., CO), and consequently part of the converted Cr(III) stayed on the surface and the rest released into solution.

Construction of ternary (1D/2D/3D) Fe2O3-supported micro pillared Cu-based MOF on chitosan with improved photocatalytic behavior on removal of paraquat

A hetero-structured metal organic framework of Cu-BTC and Fe₂O₃ nano-photocatalyst were tethered over chitosan using the hydrothermal method and fabricated a hybrid porous nanocomposite (CS-Fe@Cu-BTC). X-ray diffractometer results exposed the existence of Fe₂O₃ peaks. Surface area measurements using BET showed a mesoporous structure and the formation of type IV adsorption isotherm for nanocomposite. XPS and SEM-EDAX confirmed the existence of Fe₂O₃ nanoparticles in the hybrid porous structure. The UV-vis diffuse reflectance absorption shape emphasized the role of Fe₂O₃ in enhancing the band gap of CS-Fe@Cu-BTC nanohybrid. The lower intensity photoluminescence spectra of the CS-Fe@Cu-BTC shows a competent charge partition and delayed the recombination of electron-hole pairs. The photo-mineralization efficiency of Cu-BTC and CS-Fe@Cu-BTC was evaluated in terms of electronic interactions using paraquat (PQT) as the probe molecule, which shows a mineralization of 91% at the pH range of ~ 5. The contribution of •OH in the degradation of PQT over CS-Fe@Cu-BTC nanocomposites revealed using the trapping test and the degradation mechanism follows the Langmuir-Hinshelwood model and pseudo-first-order kinetics. The durability of the CS-Fe@Cu-BTC nanocomposite was also established after four cycling processes.

Recyclable Mussel-Inspired Magnetic Nanocellulose@Polydopamine-Ag Nanocatalyst for Efficient Degradation of Refractory Organic Pollutants and Bacterial Disinfection

Development of a novel strategy to tackle bacterial-contaminated complex industrial wastewaters containing refractory organic pollutants is of great demand. In this study, polydopamine (PDA)-coated magnetic cellulose nanofiber (MCNF)-loaded silver nanoparticle (AgNP) (MCNF/PDA-Ag) nanocomposites were designed and applied for efficient degradation of organic dye pollutants and inactivation of Escherichia coli (E. coli) in wastewater. In the presence of NaBH₄, MCNF/PDA-Ag could achieve a high catalytic reduction rate of 6.54 min^-1 for the removal of methylene blue. Similarly, it showed good catalytic reduction performance for methyl orange (0.63 min^-1) and 4-nitrophenol (2.94 min^-1). The MCNF/PDA-Ag nanocomposites can be easily magnetically recycled and reused with negligible loss of catalytic performance. Moreover, this nanocatalyst also exhibited excellent disinfection performance against E. coli, with more than 99% disinfection ratio at very low doses (50 μg/mL). Overall, this work provides new insights into a delicate design of advanced magnetically recyclable silver nanocomposites with ultrahigh catalytic rates and excellent antibacterial properties from sustainable nature biomass.

Microstructure and Antibacterial Properties of Chitosan-Fe3O4-AgNP Nanocomposite

The goal of this research is to synthesize and characterize Fe₃O₄@Chitosan-AgNP nanocomposites in order to determine their antibacterial activity. The research methods include the synthesis of Fe₃O₄@Chitosan-AgNP nanocomposites, as well as the characterization of nanoparticles using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) analysis, and subsequent antibacterial activity tests. The study's findings demonstrated the successful synthesis of Fe₃O₄@Chitosan-AgNP nanocomposites, followed by nanoparticle characterization using SEM, TEM, XRD, and FTIR. Based on the XRD results, the conjugation of Fe₃O₄@Chitosan-AgNP nanocomposites has been successfully formed, as evidenced by the appearance of characteristic peaks of Fe₃O₄, chitosan, and AgNPs. According to the FTIR results, the interaction between chitosan-AgNPs and conjugated Fe₃O₄ occurred via the N atom in the NH₂ group and the O atom in the OH group, and C=O. The SEM and TEM images also show that the Fe₃O₄@Chitosan-AgNP conjugation is a nanoparticle-based composite material. The combination of nanocomposites Fe₃O₄@Chitosan-AgNPs has antibacterial activity, inhibiting the growth of bacteria such as Bacillus cereus and Escherichia coli.

Synthesis of silver/Fe3O4@chitosan@polyvinyl alcohol magnetic nanoparticles as an antibacterial agent for accelerating wound healing

Bacterial infection causes wound inflammation and slows wound healing, posing a great threat to human health, which needs to explore more antibacterial nanobiomaterials to promote wound healing. Therefore, this study was conducted to develop low-cost silver/Fe₃O₄@Chitosan@polyvinyl alcohol (Ag/Fe₃O₄@CS@PVA) via a one-pot method to promote healing in bacteria-infected wounds. Scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Fourier-transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometry (VSM) confirmed that Ag/Fe₃O₄@CS@PVA was successfully prepared. In vitro antibacterial experiments demonstrated strong antibacterial activity of Ag/Fe₃O₄@CS@PVA against Escherichia coli and Staphylococcus aureus. The Ag/Fe₃O₄@CS@PVA destroyed the bacterial cell membrane or internal structure, thus resulting in cell death for antibacterial effects. Cytotoxicity and hemolysis rate tests showed that Ag/Fe₃O₄@CS@PVA posed fine biocompatibility. In addition, in vivo assays confirmed that Ag/Fe₃O₄@CS@PVA not only promoted the healing of wound infection caused by bacteria, but also had no toxic effect on mouse organs. Therefore, the low-cost Ag/Fe₃O₄@CS@PVA nanocomposites have great potential in controlling 'bacterial' pathogen.

Fabrication and characterization of magnetic nanomaterials for the removal of toxic pollutants from water environment: A review

The success of any sustainable growth represents an advancement of novel approaches and new methodologies for managing any ecological concern. Magnetic nanoparticles have gained recent interest owing to their versatile properties such as controlled size, shape, quantum and surface effect, etc, and outcome in wastewater treatment and pollutant removal. Developments have progressed in synthesizing magnetic nanoparticles with the required size, shape and morphology, surface and chemical composition. Magnetic nanoparticles are target specific and inexpensive compared to conventional treatment techniques. This review insight into the synthesis of magnetic nanoparticles using physical, chemical, and biological methods. The biological method of synthesizing magnetic nanoparticles serves to be cost-effective, green process, and eco-friendly for various applications. Characterization studies of synthesized nanoparticles using TEM, XRD, SARS, SANS, DLS, etc are discussed in detail. Magnetic nanoparticles are widely utilized in recent research for removing organic and inorganic contaminants. It was found that the magnetic nanosorption approach together with redox reactions proves to be an effective and flexible mechanism for the removal of pollutants from waste effluents.

Humic Acid-Coated Fe3O4 Nanoparticles Confer Resistance to Acremonium Wilt Disease and Improve Physiological and Morphological Attributes of Grain Sorghum

Acremonium wilt disease affects grain quality and reduces sorghum yield around the globe. The present study aimed to assess the efficacy of humic acid (HA)-coated Fe₃O₄ (Fe₃O₄/HA) nanoparticles (NPs) in controlling acremonium wilt disease and improving sorghum growth and yields. During the season 2019, twenty-one sorghum genotypes were screened to assess their response to Acremonium striticum via artificial infection under field conditions and each genotype was assigned to one of six groups, ranging from highly susceptible to highly resistant. Subsequently, over the two successive seasons 2020 and 2021, three different concentrations of 10, 40 and 80 mg L⁻¹ of Fe₃O₄/HA NPs were tested against A. striticum. The concentrations of 40 and 80 mg L⁻¹ were found to be highly effective in controlling acremonium wilt disease on different sorghum genotypes: LG1 (highly susceptible), Giza-3 (susceptible), and Local 119 (resistant) genotypes. After harvest, the physiological (growth and yield) and biochemical (peroxidase, catalase, and gibberellic acid) attributes of sorghum plants were determined, and the results demonstrated that concentrations of 40 and 80 mg L⁻¹ increased peroxidase and catalase activities in healthy (uninoculated) sorghum genotypes compared to inoculated sorghum genotypes. Additionally, the toxicity of Fe₃O₄/HA NPs on male albino rats was investigated via hematological (CBC), chemical (ALT and AST) and histopathological analyses. The concentration 80 mg L⁻¹ of Fe₃O₄/HA NPs caused a marked increase in ALT and creatinine level after 51 days of feeding. Severe pathological alterations were also observed in liver and kidney tissues of rats administered with grain sorghums treated with 80 mg L⁻¹. In comparison with the untreated control plants, a concentration of 40 mg L⁻¹ significantly increased the growth, yield and gibberellic acid levels (p ≤ 0.05) and was found to be safe in male albino rats. Conclusively, a concentration of 40 mg L⁻¹ of Fe₃O₄/HA NPs showed promising results in curtailing A. striticum infections in sorghum, indicating its great potential to substitute harmful fertilizers and fungicides as a smart agriculture strategy.

Functionalized Magnetic Nanomaterials in Agricultural Applications

The development of functional nanomaterials exhibiting cost-effectiveness, biocompatibility and biodegradability in the form of nanoadditives, nanofertilizers, nanosensors, nanopesticides and herbicides, etc., has attracted considerable attention in the field of agriculture. Such nanomaterials have demonstrated the ability to increase crop production, enable the efficient and targeted delivery of agrochemicals and nutrients, enhance plant resistance to various stress factors and act as nanosensors for the detection of various pollutants, plant diseases and insufficient plant nutrition. Among others, functional magnetic nanomaterials based on iron, iron oxide, cobalt, cobalt and nickel ferrite nanoparticles, etc., are currently being investigated in agricultural applications due to their unique and tunable magnetic properties, the existing versatility with regard to their (bio)functionalization, and in some cases, their inherent ability to increase crop yield. This review article provides an up-to-date appraisal of functionalized magnetic nanomaterials being explored in the agricultural sector.

Biosensors and Bioanalytical Devices based on Magnetic Particles: A Review

Magnetic particles play an important role in current technology, and this field of technology extends to a broader progression. The term magnetic particles typically cover the paramagnetic particles and super-paramagnetic particles. Various materials like iron oxide are common, but other materials are available as well; a survey of such materials has been included in this work. They can serve for technological purposes like separation and isolation of chemical products or toxic waste, their use in the diagnosis of pathologies, drug delivery and other similar applications. In this review, biosensors, bioanalytical devices and bioassays, have been discussed. Materials for magnetic particles preparation, methods of assay, biosensors and bioassays working in stationary as well as flow-through arrangements are described here. A survey of actual literature has been provided as well.

Immobilizing of palladium on melamine functionalized magnetic chitosan beads: A versatile catalyst for p-nitrophenol reduction and Suzuki reaction in aqueous medium

In this study, an environmental-friendly palladium catalyst with high efficiency, magnetic, recoverability, reusability, and excellent stability was prepared and thoroughly characterized by the Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), X-ray diffraction (XRD), Elemental mapping, Thermogravimetric analysis (TGA) and Energy-dispersive X-ray spectroscopy (EDX). Results demonstrates that melamine provides a coordination point on the surface of chitosan microspheres, which provides a platform for the uniform distribution of palladium (II) and combines with palladium (II) firmly to avoid unnecessary leaching of nanoparticles. Besides, Fe₃O₄/CS-Me@Pd microcapsules exhibited high catalytic performance in reducing p-NP in water at room temperature (150-300 s). This composite was also effective in the Suzuki-Miyaura coupling reaction under mild conditions with high catalytic performance (TON = 3.8 × 10⁴, TOF = 7.6 × 10⁴). Reproducibility experiments also showed that Fe₃O₄/CS-Me@Pd microcapsules have high recovery efficiency and can work at least six times during these two catalytic reactions. The hot filtration test indicated that the catalyst has heterogeneous nature.

Sustainable plant and microbes-mediated preparation of Fe3O4 nanoparticles and industrial application of its chitosan, starch, cellulose, and dextrin-based nanocomposites as catalysts

Iron oxide nanoparticles (Fe₃O₄ NPs) attracted significant scientific interest, considering their immense diversity of usage and biocompatibility. Perceiving the growing importance of sustainable chemistry, many efforts have been made to prepare these NPs using naturally occurring materials mostly plant extracts and microbes. Magnetic NPs (MNPs) are commonly used as composites and are considered in two matters: synthesis and modification of their functional groups. Biopolymeric nanocomposites are a group of hybrid materials composed of natural polymers and inorganic nanomaterials. Biopolymers such as alginate, cellulose, starch, gelatin, chitosan, etc. have been considered extensively and provided composites with better electrical and mechanical thermal properties. Fe₃O₄ NPs incorporated in a polymer and biopolymer matrix is a good instance of the functional nanostructure, which has been able to enhance the properties of both ingredients. These hybrids can have impressive applications in various scopes such as magneto-optical storage, electromagnetic interference shielding, catalyst, water remediation, biomedical sensing, and so on. In this study, we have tried to briefly introduce Fe₃O₄ NPs, investigate the green and sustainable methods that have been suggested for its synthesis and review recent utilization of their biopolymeric nanocomposite (NC) including starch, chitosan, dextrin, etc. as catalysts and photocatalysts.