Xylan-based hydrogels for potential skin care application

Harnessing chemical functionality of xylan hemicellulose towards carbohydrate polymer-based pH/magnetic dual-responsive nanocomposite hydrogel for drug delivery

This study reports a pH/magnetic dual-responsive hemicellulose-based nanocomposite hydrogel with nearly 100 % carbohydrate polymer-based and biodegradable polymer compositions for drug delivery. We synthesized pure Fe3O4 magnetic nanoparticles (Fe3O4 MNPs) using a co-precipitation method, then engineering xylan hemicellulose (XH), acrylic acid, poly(ethylene glycol) diacrylate, and Fe3O4 to synthesize the pH/magnetic dual-responsive hydrogel (Fe3O4@XH-Gel), through graft polymerization on XH with in-situ doping Fe3O4 MNPs initiated by the ammonium persulfate/tetramethylethylenediamine redox system. Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (1H NMR), X-ray diffractometry (XRD), scanning electron microscopy and energy dispersive spectrometer (SEM-EDS), high-resolution transmission electron microscopy (HRTEM), Brunauer-Emmett-Teller (BET), swelling gravimetric analysis, vibrating sample magnetometer (VSM) were employed to analyze the hydrogel's chemical structures, morphologies, pH-responsive behaviors, and magnetic responsiveness characteristics, mechanical and rheological properties, as well as cytotoxicity and biodegradability. The results indicate that the Fe3O4@XH-Gel exhibited excellent dual responsiveness to pH and magnetism. Furthermore, an emphasis was placed on the in-depth analysis of the pH response mechanism. Finally, we utilized this cutting-edge hydrogel to investigate the controlled-release behavior of two model drugs, Acetylsalicylic acid and Theophylline. The hydrogel demonstrated exceptional controlled release attributes, positioning it as a potential carrier for targeted drug delivery, particularly to the gastrointestinal conditions.

Renewable hemicellulose-based materials for value-added applications

The importance of renewable resources and environmentally friendly materials has grown globally in recent time. Hemicellulose is renewable lignocellulosic materials that have been the subject of substantial valorisation research. Due to its distinctive benefits, including its wide availability, low cost, renewability, biodegradability, simplicity of chemical modification, etc., it has attracted increasing interest in a number of value-added fields. In this review, a systematic summarizes of the structure, extraction method, and characterization technique for hemicellulose-based materials was carried out. Also, their most current developments in a variety of value-added adsorbents, biomedical, energy-related, 3D-printed materials, sensors, food packaging applications were discussed. Additionally, the most recent challenges and prospects of hemicellulose-based materials are emphasized and examined in-depth. It is anticipated that in the near future, persistent scientific efforts will enable the renewable hemicellulose-based products to achieve practical applications.

High stretchable and tough xylan-g-gelatin hydrogel via the synergy of chemical cross-linking and salting out for strain sensors

Stretchable and tough hydrogels have been extensively used in tissue engineering scaffolds and flexible electronics. However, it is still a significant challenge to prepare hydrogels with both tensile strength and toughness by utilizing xylan, which is abundant in nature. Herein, we present a novel hydrogel of carboxymethyl xylan(CMX) graft gelatin (G) and doped with conductive hydroxyl carbon nanotubes (OCNT). CMX and G are combined through amide bonding as well as intermolecular hydrogen bonding to form a semi-interpenetrating hydrogel network. The hydrogel was further subjected to salting-out treatment, which induced the aggregation of the CMX-g-G molecular chain and the formation of chain bundles to toughen the hydrogel, the tensile strain, tensile stress, and toughness of CMX-g-G hydrogels were 1.547 MPa, 324 %, and 2.31 MJ m-3, respectively. In addition, OCNT was used as a conductive filler to impart electrical conductivity and further improve the mechanical properties of CMX-g-G/OCNT hydrogel, and a tensile strength of 1.62 MPa was obtained. Thus, the synthesized CMX-g-G/OCNT hydrogel can be used as a reliable and sensitive strain sensor for monitoring human activity. This study opens up new horizons for the preparation of xylan-based high-performance hydrogels.

Green Approaches on Modification of Xylan Hemicellulose to Enhance the Functional Properties for Food Packaging Materials-A Review

Based on the environmental concerns, the utilisation of hemicelluloses in food packaging has become a sustainable alternative to synthetic polymers and an important method for the efficient utilisation of biomass resources. After cellulose, hemicellulose is a second component of agricultural and forestry biomass that is being taken advantage of given its abundant source, biodegradability, nontoxicity and good biocompatibility. However, due to its special molecular structure and physical and chemical characteristics, the mechanical and barrier properties of hemicellulose films and coatings are not sufficient for food packaging applications and modification for performance enhancement is needed. Even though there are many studies on improving the hydrophobic properties of hemicelluloses, most do not meet environmental requirements and the chemical modification of these biopolymers is still a challenge. The present review examines emerging and green alternatives to acetylation for xylan hemicellulose in order to improve its performance, especially when it is used as biopolymer in paper coatings or films for food packaging. Ionic liquids (ILs) and enzymatic modification are environmentally friendly methods used to obtain xylan derivatives with improved thermal and mechanical properties as well as hydrophobic performances that are very important for food packaging materials. Once these novel and green methodologies of hemicellulose modifications become well understood and with validated results, their production on an industrial scale could be implemented. This paper will extend the area of hemicellulose applications and lead to the implementation of a sustainable alternative to petroleum-based products that will decrease the environmental impact of packaging materials.

An update on xylan structure, biosynthesis, and potential commercial applications

•Xylan is an abundant carbohydrate component of plant cell walls that is vital for proper cell wall structure and vascular tissue development.•Xylan structure is known to vary between different tissues and species.•The role of xylan in the plant cell wall is to interact with cellulose, lignin, and hemicelluloses.•Xylan synthesis is directed by several types of Golgi-localized enzymes.•Xylan is being explored as an eco-friendly resource for diverse commercial applications.

Hemicellulose-based hydrogels for advanced applications

Hemicellulose-based hydrogels are three-dimensional networked hydrophilic polymer with high water retention, good biocompatibility, and mechanical properties, which have attracted much attention in the field of soft materials. Herein, recent advances and developments in hemicellulose-based hydrogels were reviewed. The preparation method, formation mechanism and properties of hemicellulose-based hydrogels were introduced from the aspects of chemical cross-linking and physical cross-linking. The differences of different initiation systems such as light, enzymes, microwave radiation, and glow discharge electrolytic plasma were summarized. The advanced applications and developments of hemicellulose-based hydrogels in the fields of controlled drug release, wound dressings, high-efficiency adsorption, and sensors were summarized. Finally, the challenges faced in the field of hemicellulose-based hydrogels were summarized and prospected.

Modification of xylan via an oxidation-reduction reaction

Xylan is a biopolymer readily available from forest resources. Various modification methods, including oxidation with sodium periodate, have been shown to facilitate the engineering applications of xylan. However, modification procedures are often optimized for semicrystalline high molecular weight polysaccharide cellulose rather than for lower molecular weight and amorphous polysaccharide xylan. This paper elucidates the procedure for the periodate oxidation of xylan into dialdehyde xylan and its further reduction into a dialcohol form and is focused on the modification work up. The oxidation-reduction reaction decreased the molecular weight of xylan while increased the dispersity more than 50%. Unlike the unmodified xylan, all the modified grades could be solubilized in water, which we see essential for facilitating the future engineering applications of xylan. The selection of quenching and purification procedures and pH-adjustment of the reduction step had no significant effect on the degree of oxidation, molecular weight and only a minor effect on the hydrodynamic radius in water. Hence, it is possible to choose the simplest oxidation-reduction route without time consuming purification steps within the sequence.

Dialdehyde Starch Nanocrystals as a Novel Cross-Linker for Biomaterials Able to Interact with Human Serum Proteins

In recent years, new cross-linkers from renewable resources have been sought to replace toxic synthetic compounds of this type. One of the most popular synthetic cross-linking agents used for biomedical applications is glutaraldehyde. However, the unreacted cross-linker can be released from the materials and cause cytotoxic effects. In the present work, dialdehyde starch nanocrystals (NDASs) were obtained from this polysaccharide nanocrystal form as an alternative to commonly used cross-linking agents. Then, 5-15% NDASs were used for chemical cross-linking of native chitosan (CS), gelatin (Gel), and a mixture of these two biopolymers (CS-Gel) via Schiff base reaction. The obtained materials, forming thin films, were characterized by ATR-FTIR, SEM, and XRD analysis. Thermal and mechanical properties were determined by TGA analysis and tensile testing. Moreover, all cross-linked biopolymers were also characterized by hydrophilic character, swelling ability, and protein absorption. The toxicity of obtained materials was tested using the Microtox test. Dialdehyde starch nanocrystals appear as a beneficial plant-derived cross-linking agent that allows obtaining cross-linked biopolymer materials with properties desirable for biomedical applications.

Self-Standing, Photothermal-Actuating, and Motion-Monitoring Janus Films One-Pot Synthesized by Green Carboxymethyl Glucomannan/Liquid Metal Nanoinks

Downsizing bulk liquid metals (LM) at the nanometer scale with biocompatibility and multifunction is a key process for electronic or medical applications. Here, we report a stable and green LM aqueous colloidal ink by wrapping eutectic gallium-indium alloys (EGaIn) with carboxymethyl glucomannan (CGM) derived from radiata pine chip, which is capable of being prepared into a free-standing, photothermal-actuating, and motion-monitoring Janus film. With the assistance of CGM, the bulk EGaIn was ultrasonicated into stable nanodroplets (∼500 nm) with a typical "core-shell" structure, in which the colloidal inks can be stored for more than 1 week under room temperature. The stable CGM/EGaIn inks can be patterned on different substrates to form coating layers or self-assembled into free-standing Janus films with high mechanical strength and modulus (∼94 MPa and ∼3.8 GPa) by density deposition. Such a Janus film with anisotropic thermal conductivity made it a potential photothermal actuator. In addition, the biocompatible film demonstrated both high conductivity and large resistance variation in response to strain change (gauge factor >500), allowing for human motion monitoring. This work provides a new prospect for the development of biocompatible and high-performance nano-LM materials.

Preparation, physicochemical and pharmacological study of 10-hydroxycamptothecin solid dispersion with complexation agent - xylan-nonanoic acid amphiphilic conjugates

An amphiphilic conjugate of carboxymethyl xylan-nonanoic acid (CX-NA) was synthesized with molecular weight of 38.35 kDa, HLB value of 13.59, and critical micelle concentration of 23.17 μg/ml. CX-NA could efficiently encapsulate the model drug of 10-hydroxycamptothecin (HCPT). The drug loaded amphiphilic conjugate could self-assembled to micelles with an average diameter of 110 nm, zeta potential of -42.88 mV, and drug encapsulation efficiency of 79.8%. In vitro experiments confirmed that the drug-loaded micelles exhibited excellent stability and permeability in the intestinal environment. Transport pathway demonstrated that HCPT was uptake by cells through clathrin-mediated endocytosis. Intestinal in situ absorption study further confirmed CX-NA vehicle could enhance HPCT to transport across intestinal epithelial cells in colonic tissues. Furthermore, the formulation showed excellent anti-tumor activity in vitro and improved bioavailability of 3.4 times in vivo as comparing with free HCPT. These findings imply that this amphiphilic conjugate is a potential and promising vehicle for delivery anticancer drug.

Xylan Hemicellulose: A Renewable Material with Potential Properties for Food Packaging Applications

Xylan hemicelluloses are considered the second most abundant class of polysaccharides after cellulose which has good natural barrier properties necessary for foods packaging papers and films. Xylan exists today as a natural polymer, but its utilisation in packaging applications is limited and not sufficiently analysed. In this study, the performances of hardwood xylan hemicellulose in forming uniform films and as biopolymer for paper coatings were analysed. The xylan-coated paper and film samples were tested regarding their water, air, and water vapour permeability, water solubility, mechanical strength, and antimicrobial activity against pathogenic bacteria. Structural analyses of xylan hemicelluloses emphasised a high number of hydroxyl groups with high water affinity. This affects the functional properties of xylan-coated papers but can facilitate the chemical modification of xylan in order to improve their hydrophobic properties and extend their areas of application. The obtained results unveil a promising starting point for using this material in food packaging applications as a competitive and sustainable alternative to petroleum-based polymers.

Constructing a Novel Xylan-Based Film with Flexibility, Transparency, and High Strength

Xylan-based films have great potential to replace petroleum-based polymers used for packaging and coatings due to their excellent biocompatibility, biodegradability, and good gas barrier properties. However, fabricating a xylan-based film with flexible, transparent, water-proof, and excellent mechanical properties is an enormous challenge. Herein, we manufactured a series of degradable films with adjustable properties via solution-casting using a water-soluble xylan derivative. This is the first report of a pure xylan-based film with high performance, requiring no additives. The tensile strength of the xylan-based film could be controlled by adjusting the aldehyde content, which varied from 105.0 to 132.6 MPa. The smallest initial water contact angle of the xylan-based films is 93.26°, indicating that these films are hydrophobic. This work shows a simple and viable route toward manufacturing xylan-based films with high tensile strength, flexibility, and transparency, which can be used for packaging materials and coatings.

Oleogel-Based Systems for the Delivery of Bioactive Compounds in Foods

Oleogels are semi-solid materials containing a large fraction of liquid oil entrapped in a network of structuring molecules. In the food industry, these formulations can be used to mimic fats and to deliver bioactive compounds. In the last decade, there has been increasing interest in these structures, not only from a scientific point of view, i.e., studying new molecules, methodologies for gelification, and new structures, but also from a technological point of view, with researchers and companies exploring these structures as a way to overcome certain challenges and/or create new and innovative products. One of the exciting applications of oleogels is the delivery of functional molecules, where the incorporation of oil-soluble functional compounds can be explored not only at the macroscale but also at micro- and nanoscales, resulting in different release behaviors and also different applications. This review presents and discusses the most recent works on the development, production, characterization, and applications of oleogels and other oleogel-based systems to deliver functional molecules in foods.

An injectable, dual crosslinkable hybrid pectin methacrylate (PECMA)/gelatin methacryloyl (GelMA) hydrogel for skin hemostasis applications

Biomaterials for effective hemorrhage control are urgently needed in clinics as uncontrolled bleeding is associated with high mortality. Herein, we developed an injectable and in situ photo-crosslinkable hybrid hemostatic hydrogel by combining pectin methacrylate (PECMA) and gelatin methacryloyl (GelMA). This modular material system combines ionic- and photo-crosslinking chemistries to design interpenetrating networks (IPN) exhibiting tunable rheology, highly porous structure, and controllable swelling and mechanical properties. By simply changing the calcium (0-15 mM) and polymer (1.5-7%) content used for the sequential crosslinking of hydrogels via calcium gelation and UV-photopolymerization, it was possible to precisely modulate the injectability, degradation, and swelling ratio. Moreover, it is demonstrated that PECMA/GelMA hydrogels present good cytocompatibility and uniquely synergize the hemostatic properties of calcium ions on PECMA, the amine residues on GelMA, and the highly porous network toward rapid blood absorption and fast coagulation effect. An in vitro porcine skin bleeding model confirmed that the hydrogel could be directly injected into the wound and rapidly photo-crosslinked, circumventing the bleeding and decreasing the coagulation time by 39%. Importantly, the crosslinked hydrogel could be easily removed to prevent secondary wound injury. Overall, this injectable hybrid PECMA/GelMA hydrogel stands as a promising hemostatic material.

Rapid fabrication of xylan-based hydrogel by graft polymerization via a dynamic lignin-Fe3+ plant catechol system

Traditional preparation methods of the hydrogel are not only tedious but also requiring external stimuli. Here, a plant catechol-inspired self-catalytic system (sulfonated lignin and iron ion) has been introduced to rapidly trigger the graft polymerization of vinyl monomers on the carboxymethyl xylan (CMX) at room temperature, generating an elastic, UV-shield, and conductive hydrogel. The rapid preparation process can be finished at room temperature in 5 min without the removal of oxygen. The hydrogel shows charming extension ratio (up to 460%) and tensile stress (up to 23 kPa), which can be ascribed to the double network structure constructed from Fe³⁺ and CMX. The hydrogel exhibits great transparency (up to 85.37%), fascinating UV-blocking (up to 99%), and conductive features, thereby serving as potential human body sensors. The rapid preparation of xylan-derived hydrogels via dynamic lignin catechol chemistry may open up a new approach to high-valued utilization of biomass.

Strategies to Increase the Biological and Biotechnological Value of Polysaccharides from Agricultural Waste for Application in Healthy Nutrition

Nowadays, there is a growing interest in the extraction and identification of new high added-value compounds from the agro-food industry that will valorize the great amount of by-products generated. Many of these bioactive compounds have shown beneficial effects for humans in terms of disease prevention, but they are also of great interest in the food industry due to their effect of extending the shelf life of foods by their well-known antioxidant and antimicrobial activity. For this reason, an additional research objective is to establish the best conditions for obtaining these compounds from complex by-product structures without altering their activity or even increasing it. This review highlights recent work on the identification and characterization of bioactive compounds from vegetable by-products, their functional activity, new methodologies for the extraction of bioactive compounds from vegetables, possibly increasing their biological activity, and the future of the global functional food and nutraceuticals market.

Molecular modification, structural characterization, and biological activity of xylans

The differences in the source and structure of xylans make them have various biological activities. However, due to their inherent structural limitations, the various biological activities of xylans are far lower than those of commercial drugs. Currently, several types of molecular modification methods have been developed to address these limitations, and many derivatives with specific biological activity have been obtained. Further research on structural characteristics, structure-activity relationship and mechanism of action is of great significance for the development of xylan derivatives. Therefore, the major molecular modification methods of xylans are introduced in this paper, and the primary structure and conformation characteristics of xylans and their derivatives are summarized. In addition, the biological activity and structure-activity relationship of the modified xylans are also discussed.

Does polysaccharide quaternization improve biological activity?

The natural polysaccharides, due to their structural diversity, commonly present very distinct solubility and physical chemical properties and additionally have intrinsic biological activities that, gene-rally, reveal themselves in a light way. The chemical modification of the molecular structure can improve these parameters. In this review, original articles that approached the quaternization of polysaccharides for purposes of biological application were selected, without limitation of year of publication, in the databases Scopus, Web of Science and PubMed. The results obtained from the bibliographic survey indicate that the increase in positive charges caused by quaternization improves the interaction between modified polysaccharides and structures that have negative charges on their surface, such as the cell wall of microorganisms and some cells in the human body, such as the DNA. This greater interaction is reflected as an increase in the biological activity of all polysaccharides broached in this study. Another important data obtained was the fact that the chemical changes did not affect or irrelevantly affect the toxicity of almost all of the polysaccharides that were quaternized. Therefore, polysaccharide quaternization is a safe and effective way to obtain improvements in the biological behavior of these macromolecules.

Deposition behavior of lignin on solid surfaces assessed by stagnation point adsorption reflectometry

The deposition behavior of lignin on a solid surface was studied using stagnation point adsorption reflectometry (SPAR) comprehensively. In this study, the light absorption coefficient of lignin (τ = 20 476 m-1) at 633 nm wavelength was considered to define a new imaginary refractive index (k) used in the SPAR technique for adsorption analysis. The inclusion of k in the adsorption model yielded an adsorbed amount (Γ) of 1.11 mg m-2, leading to the quality factor (Q f) of 31.71 mg m-2. At a lower concentration, the deposition of lignin on the surface was increased, and it generated a maximum sticking coefficient of β = 0.71 at 25 mg L-1 on the surface. At the concentration range of 35 and 45 mg L-1, lignin formed clusters and its deposition dropped. The use of Quartz crystal microbalance (QCM) and SPAR techniques also confirmed that the proportion of water in the deposited lignin adlayer was greater when a lower concentration (5-25 mg L-1) of lignin solution was used for adsorption. The findings of this study revealed the potential use of the SPAR technique for evaluating the deposition performance of lignin-based materials on varied surfaces, which would facilitate the development of coating and composite applications for lignin.

An Overview of the Antimicrobial Properties of Lignocellulosic Materials

Pathogenic microbes are a major source of health and environmental problems, mostly due to their easy proliferation on most surfaces. Currently, new classes of antimicrobial agents are under development to prevent microbial adhesion and biofilm formation. However, they are mostly from synthetic origin and present several disadvantages. The use of natural biopolymers such as cellulose, hemicellulose, and lignin, derived from lignocellulosic materials as antimicrobial agents has a promising potential. Lignocellulosic materials are one of the most abundant natural materials from renewable sources, and they present attractive characteristics, such as low density and biodegradability, are low-cost, high availability, and environmentally friendly. This review aims to provide new insights into the current usage and potential of lignocellulosic materials (biopolymer and fibers) as antimicrobial materials, highlighting their future application as a novel drug-free antimicrobial polymer.

Oxidized xylan additive for nanocellulose films - A swelling modifier

Polymeric wood hemicelluloses are depicted to join cellulose, starch and chitosan as key polysaccharides for sustainable materials engineering. However, the approaches to incorporate hemicelluloses in emerging bio-based products are challenged by lack of specific benefit, other than the biomass-origin, although their utilization would contribute to sustainable material use since they currently are a side stream that is not valorized. Here we demonstrate wood-xylans as swelling modifiers for neutral and charged nanocellulose films that have already entered the sustainable packaging applications, however, suffer from humidity sensitivity. The oxidative modification is used to modulate the water-solubility of xylan and hence enable adsorption in an aqueous environment. A high molecular weight grade, hence less water-soluble, adsorbed preferentially on the neutral surface while the adsorbed amount on a negatively charged surface was independent of the molecular weight, and hence, solubility. The adsorption of the oxidized xylans on a neutral cellulose surface resulted in an increase in the amount of water in the film while on the negatively charged cellulose the total amount of water decreased. The finding of synergy of two hygroscopic materials to decrease swelling in hydrophilic bio-polymer films demonstrates the oxidized macromolecule xylan as structurally functional component in emerging cellulose products.

Review: Periodate oxidation of wood polysaccharides-Modulation of hierarchies

Periodate oxidation of polysaccharides has transitioned from structural analysis into a modification method for engineered materials. This review summarizes the research on this topic. Fibers, fibrils, crystals, and molecules originating from forests that have been subjected to periodate oxidation can be crosslinked with other entities via the generated aldehyde functionality, that can also be oxidized or reduced to carboxyl or alcohol functionality or used as a starting point for further modification. Periodate-oxidized materials can be subjected to thermal transitions that differ from the native cellulose. Oxidation of polysaccharides originating from forests often features oxidation of structures rather than liberated molecules. This leads to changes in macro, micro, and supramolecular assemblies and consequently to alterations in physical properties. This review focuses on these aspects of the modulation of structural hierarchies due to periodate oxidation.