Fabrication of multifunctional Guar gum-silver nanocomposite hydrogels for biomedical and environmental applications

In situ fabricated ZnO nanostructures within carboxymethyl cellulose-based ternary hydrogels for wound healing applications

Zinc oxide nanostructures (ZnO NS) were fabricated in situ within a ternary hydrogel system composed of carboxymethyl cellulose-agarose-polyvinylpyrrolidone (CAP@ZnO TNCHs) by a one-pot method employing moist-heat solution casting. The percentages of CMC and ZnO NS were varied in the CAP hydrogel films and then they were investigated by different techniques, such as ATR/FTIR, TGA, XRD, XPS, and FE-SEM analysis. Furthermore, the mechanical properties, hydrophilicity, swelling, porosity, and antibacterial activity of the CAP@ZnO TNCHs were studied. In-vitro biocompatibility assays were performed with skin fibroblast (CCD-986sk) cells. In-vitro culture of CCD-986sk fibroblasts showed that the ZnO NS facilitated cell adhesion and proliferation. Furthermore, the application of CAP@ZnO TNCHs enhanced cellular interactions and physico-chemical, antibacterial bacterial, and biological performance relative to unmodified CAP hydrogels. Also, an in vivo wound healing study verified that the CAP@ZnO TNCHs promoted wound healing significantly within 18 days, an effect superior to that of unmodified CAP hydrogels. Hence, these newly developed cellulose-based ZnO TNCHs are promising materials for wound healing applications.

Synthesis and characterization of novel guar gum based waste material derived nanocomposite for effective removal of hexabromocyclododecane and lindane

Herein, efficient degradation of hexabromocyclododecane (HBCD) and Lindane, a persistent organic pollutant using guar gum based calcium oxide doped silicon dioxide (GG-CaO@SiO2) has been reported. The nanocomposite was prepared by waste egg shell (CaO) and rice husk (SiO2) was well characterized. The maximum degradation of HBCD and Lindane were observed at 8 mg catalyst loading, neutral pH, and 2 mg L-1 of pollutant amount. The photocatalytic performance of GG-CaO@SiO2 for HBCD and Lindane photodegradation was evaluated, and it was found that the rate constant increased in the order of GG-CaO@SiO2 > CaO@SiO2 > GG. The polymeric GG-CaO@SiO2 nanocomposite showed maximum removal of both pollutants due to higher surface area (70 m2 g-1) and synergistic interactions among GG moieties. It achieved HBCD and Lindane elimination rates of 94 % and 90 % by photo-adsorptive degradation within 150 min. Meanwhile, the leaching of HBCD from expanded polystyrene (EPS) materials (0.14 ± 0.05 ppm) underwater with different time intervals and degradation of leachate HBCD were also assessed. The eradication of the pollutant manifested first-order kinetics, with the Langmuir adsorption. LC-MS analysis confirmed that GG-CaO@SiO2 effectively breaks down complex structure toxic pollutants into safer metabolites under natural sunlight exposure. The polymeric GG-CaO@SiO2 nanocomposite showed notable reusability up to ten cycle promotes sustainability.

Chitosan supported silver nanostructures as surface-enhanced Raman scattering sensor: Spectroscopic and density functional theory insights

In this work, nanostructures comprising silver nanoparticles supported on a wrinkled chitosan matrix (Ag@Ch) were successfully synthesized by a simple aging process at room temperature for four days through self-assembly. Chitosan, a natural polysaccharide was used as a support as well as a reducing agent for the formation of Ag nanostructures and the creation of hotspots for SERS activity. The fabricated Ag@Ch nanostructures were characterized by several spectroscopic techniques and were used as a surface-enhanced Raman scattering (SERS) substrate. The effect of wet, dry, and liquid samples on the SERS enhancement has been studied and was found to be effective for sensing Methylene blue, Crystal Violet, and p-Nitrophenol with detection limits of 3.8, 8.1, and 8.2 ppb respectively. The SERS enhancement of the Ag@Ch was attributed to the combination of both electromagnetic (EM) and chemical effects (CE). Density functional theory (DFT) calculations were used to explain the observed surface enhancement. Good agreement was observed between the experimental and simulated spectra.

A Comprehensive Review of Polysaccharide-Based Hydrogels as Promising Biomaterials

Polysaccharides have emerged as a promising material for hydrogel preparation due to their biocompatibility, biodegradability, and low cost. This review focuses on polysaccharide-based hydrogels' synthesis, characterization, and applications. The various synthetic methods used to prepare polysaccharide-based hydrogels are discussed. The characterization techniques are also highlighted to evaluate the physical and chemical properties of polysaccharide-based hydrogels. Finally, the applications of SAPs in various fields are discussed, along with their potential benefits and limitations. Due to environmental concerns, this review shows a growing interest in developing bio-sourced hydrogels made from natural materials such as polysaccharides. SAPs have many beneficial properties, including good mechanical and morphological properties, thermal stability, biocompatibility, biodegradability, non-toxicity, abundance, economic viability, and good swelling ability. However, some challenges remain to be overcome, such as limiting the formulation complexity of some SAPs and establishing a general protocol for calculating their water absorption and retention capacity. Furthermore, the development of SAPs requires a multidisciplinary approach and research should focus on improving their synthesis, modification, and characterization as well as exploring their potential applications. Biocompatibility, biodegradation, and the regulatory approval pathway of SAPs should be carefully evaluated to ensure their safety and efficacy.

Synergistic Effects of AgNPs and Biochar: A Potential Combination for Combating Lung Cancer and Pathogenic Bacteria

The synthesis of reliable biological nanomaterials is a crucial area of study in nanotechnology. In this study, Emericella dentata was employed for the biosynthesis of AgNPs, which were then combined with synthesized biochar, a porous structure created through biomass pyrolysis. The synergistic effects of AgNPs and biochar were evaluated through the assessment of pro-inflammatory cytokines, anti-apoptotic gene expression, and antibacterial activity. Solid biosynthesized AgNPs were evaluated by XRD and SEM, with SEM images revealing that most of the AgNPs ranged from 10 to 80 nm, with over 70% being less than 40 nm. FTIR analysis indicated the presence of stabilizing and reducing functional groups in the AgNPs. The nanoemulsion's zeta potential, hydrodynamic diameter, and particle distribution index were found to be -19.6 mV, 37.62 nm, and 0.231, respectively. Biochar, on the other hand, did not have any antibacterial effects on the tested bacterial species. However, when combined with AgNPs, its antibacterial efficacy against all bacterial species was significantly enhanced. Furthermore, the combined material significantly reduced the expression of anti-apoptotic genes and pro-inflammatory cytokines compared to individual treatments. This study suggests that low-dose AgNPs coupled with biochar could be a more effective method to combat lung cancer epithelial cells and pathogenic bacteria compared to either substance alone.

Experimental Demonstration of Compact Polymer Mass Transfer Device Manufactured by Additive Manufacturing with Hydrogel Integration to Bio-Mimic the Liver Functions

In this paper, we designed and demonstrated a stimuli-responsive hydrogel that mimics the mass diffusion function of the liver. We have controlled the release mechanism using temperature and pH variations. Additive manufacturing technology was used to fabricate the device with nylon (PA-12), using selective laser sintering (SLS). The device has two compartment sections: the lower section handles the thermal management, and feeds temperature-regulated water into the mass transfer section of the upper compartment. The upper chamber has a two-layered serpentine concentric tube; the inner tube carries the temperature-regulated water to the hydrogel using the given pores. Here, the hydrogel is present in order to facilitate the release of the loaded methylene blue (MB) into the fluid. By adjusting the fluid’s pH, flow rate, and temperature, the deswelling properties of the hydrogel were examined. The weight of the hydrogel was maximum at 10 mL/min and decreased by 25.29% to 10.12 g for the flow rate of 50 mL/min. The cumulative MB release at 30 °C increased to 47% for the lower flow rate of 10 mL/min, and the cumulative release at 40 °C climbed to 55%, which is 44.7% more than at 30 °C. The MB release rates considerably increased when the pH dropped from 12 to 8, showing that the lower pH had a major impact on the release of MB from the hydrogel. Only 19% of the MB was released at pH 12 after 50 min, and after that, the release rate remained nearly constant. At higher fluid temperatures, the hydrogels lost approximately 80% of their water in just 20 min, compared to a loss of 50% of their water at room temperature. The outcomes of this study may contribute to further developments in artificial organ design.

Nose-to-brain delivery of paliperidone palmitate poloxamer-guar gum nanogel: Formulation, optimization and pharmacological studies in rats

Oral delivery of paliperidone palmitate (PPD), a potent antipsychotic agent, has been reported with a potential risk of very serious drug-induced adverse events such as tachycardia, hyperprolactinemia, sexual dysfunction, and neutropenia. Alternatively, the potential of nasal delivery has also been explored to treat CNS complications by delivering the medicines directly to the brain bypassing the blood-brain barrier. Hence, the objectives of current work were to formulate, design, optimize, and investigate the therapeutic potency of PPD-loaded intranasal in-situ gel (PPGISG) in the treatment of schizophrenia. PPD-nanoemulsion (PNE) was fabricated using water titration technique, was further optimized via Box-Behnken design. Furthermore, the optimized PNE was evaluated for parameters such as globule size, polydispersity index, zeta potential, and % entrapment efficiency were found to be 21.44±1.58nm, 0.268±0.02, -25.56±1.6mV, and 99.89±0.25%, respectively. PNE was further converted to PPGISG utilizing two polymers, poloxamer, and guar gum. Simultaneously, ex-vivo permeation for PNE, PPGISG, and PPD-suspension was found to be 211.40±4.8, 297.89±3.9 and 98.66±1.6μg/cm², respectively. While PPGISG nanoparticles showed 1.58 and 5.65-folds more J_ss than PNE and PPD-suspension. Behavioral studies confirmed that no extrapyramidal symptoms were observed in experimental animals post intranasal administration. Finally, the outcomes of the in-vivo hemato-compatibility study proved that intranasal formulation did not cause any alteration in leukocytes, RBCs, and neutrophils count. Therefore, intranasal delivery of PPGISG can be considered a novel tool for the safe delivery of PPD in schizophrenic patients.

Properties of galactomannans and their textile-related applications-A concise review

Galactomannans are reserve carbohydrates in legume plants and are primarily extracted from their seeds. They contain galactose side chains throughout the mannose backbone and have unique features such as emulsifying, thickening, and gelling together with biodegradability, biocompatibility, and non-toxicity, which make them an appealing material. Guar gum and locust bean gum mainly are used in all galactomannan needed applications. Nonetheless, tara gum and fenugreek gum have also attracted considerable attention in recent decades. Despite the increased usage of galactomannans in the textile-related fields in recent years, there is no review article published yet. To fill this gap and to demonstrate the striking and increasing importance of galactomannans, a concise summary of the properties of common galactomannans and their comparisons is given first, followed by an account of recent developments and applications of galactomannans in the textile-related fields. The associated potential opportunities are also provided at the end of this review.

Guar gum, a low-cost sustainable biopolymer, for wastewater treatment: A review

Rapid population growth and the resultant pollution of freshwater resources have created a water stress condition reducing the availability of safe and affordable water. Guar gum, a biocompatible macromolecule obtained from the endosperm of the seeds of Cyamopsis tetragonolobus, is a fascinating raw material for multifunctional adsorbents. This review assembled the work conducted by various researchers over the past few decades and discussed the structure, properties, and different modifications methods employed to develop versatile guar gum-based adsorbent. The paper also summarized the recent progress of guar gum-based nanocomposites for the remediation of multiple hazardous substances such as organic dyes, toxic heavy metal ions, oil-water separation as well as inhibiting the growth of bacterial pathogens. Thus, the important contribution of guar gum composites to safeguard the water quality is highlighted which will overcome the limitations and streamline the future course of innovative research.

Biogenic synthesis of reduced graphene oxide decorated with silver nanoparticles (rGO/Ag NPs) using table olive (olea europaea) for efficient and rapid catalytic reduction of organic pollutants

In this work, graphene oxide (GO) sheets were prepared via a facile electrochemical exfoliation of graphite in acidic medium and subsequent oxidation with potassium permanganate. The GO sheets were employed for preparation of reduced GO adorned with nanosized silver (rGO/Ag NPs) using green reduction of GO and Ag(I) via olive fruit extract as a reducing and immobilizing agent. The crystal phase, morphology, and nanostructure of the prepared catalyst were characterized by XRD, SEM, EDX, UV-Vis and Raman spectroscopy techniques. The as-prepared rGO/Ag NPs showed superior catalytic performance towards the complete reduction (up to 99%) of 4-nitrophenol (4-NPH) to 4-aminophenol (4-APH) and rhodamine B (RhB) to Leuco RhB within 180 s using NaBH₄ at ambient condition. The rate constant (k) values were found to be 0.021 and 0.022 s^-1 for 4-NPH and RhB reduction, respectively. In addition, the regenerated catalyst could be reused after seven cycles without losing any apparent catalytic efficiency. Accounting for the excellent catalytic capability, chemical stability and environment-friendly synthesis protocol, the rGO/Ag NPs has great potential working as a heterogeneous catalyst in the transforming harmful organic contaminants into less harmful or harmless compounds.

Highly biocompatible formulations based on Arabic gum Nano composite hydrogels: Fabrication, characterization, and biological investigation

In the study, fabrication of Arabic gum (AG) hydrogels via reverse micellization method is reported. AG hydrogels were utilized as capping agents to encapsulate zinc sulphide (ZnS), and cadmium sulphide (CdS) nanoparticles via in-situ reduction. Pristine and nanocomposite hydrogels (AG-ZnS and AG-CdS) were characterized through SEM, EDX, TEM, XRD, FTIR, TGA, UV/Visible, and photoluminescence spectroscopy. The hydrogels were subjected to multiple biological assays including antimicrobial, antioxidant, and anti-diabetic formulation, in addition to biocompatibility test. The hydrogels were found to be more effective against bacterial and fungal strains. For instance, AG-ZnS exhibited excellent growth inhibition activity against Escherichia coli (ZoI: 12 ± 1.04 mm) and Candida albicans (35 ± 0.94 mm). Likewise, the nanocomposites hydrogel also displayed excellent DPPH and ABTS free radical scavenging capacity, total antioxidant capacity (TAC), and total reducing power (TRP) ability. Among the hydrogels, AG-ZnS demonstrated considerable α-amylase, and α-glucosidase inhibition potential. Above all, the hydrogels were found highly compatible with human red blood cells (hRBCs). Owing to remarkable antioxidant, antibacterial, antifungal, and bio-compatible nature, the fabricated nanocomposites hydrogels have the potential to be explored in tissue engineering, wound healing, drug delivery, and in environmentally friendly hygiene products.

Recent advancements in synthesis and drug delivery utilization of polysaccharides-based nanocomposites: The important role of nanoparticles and layered double hydroxides

Drug delivery systems are explained as methods to deliver a specific drug to desired organs, tissues, and cells for drug release to diseases treatment. Recently, considerable development has been interested in stimuli-responsive nano-systems, which respond to the essential pathological and physicochemical issues in diseased sites. During the last decades, researchers in the world presented, investigated, and implemented novel different nanomaterials with a focus on developing drug delivery. Polysaccharides including chitosan, alginate, hyaluronic acid, gums, and cellulose, as natural bio-materials, are suitable candidates for designing and formulations of these nano-systems because of the outstanding merits such as bio-compatibility, bio-degradability, non-toxicity, and gelling characteristics. On the other side, nanoparticles including metals (Au, Ag), metal oxides (Fe₃O₄, ZnO, CuO), or non-metal oxides (SiO₂) and also, layered double hydroxides nanostructures have appealed significant consideration in the fields of biomedical therapeutics and cancer therapy owing to the bio-compatibility, great surface area, good chemical and mechanical features, and also proper magnetic characteristics. This comprehensive review provides an overview of current advancements in drug delivery strategies, and manufacturing methods using chitosan, alginate, hyaluronic acid, gums, and also, metals, metal oxides, non-metal oxides, and LDHs for delivery system uses.

Hydrogels for Large-Scale Expansion of Stem Cells

Stem cells demonstrate considerable promise for various preclinical and clinical applications, including drug screening, disease treatments, and regenerative medicine. Producing high-quality and large amounts of stem cells is in demand for these applications. Despite challenges, as hydrogel-based cell culture technology has developed, tremendous progress has been made in stem cell expansion and directed differentiation. Hydrogels are soft materials with abundant water. Many hydrogel properties, including biodegradability, mechanical strength, and porosity, have been shown to play essential roles in regulating stem cell proliferation and differentiation. The biochemical and physical properties of hydrogels can be specifically tailored to mimic the native microenvironment that various stem cells reside in vivo. A few hydrogel-based systems have been developed for successful stem cell cultures and expansion in vitro. In this review, we summarize various types of hydrogels that have been designed to effectively enhance the proliferation of hematopoietic stem cells (HSCs), mesenchymal stem/stromal cells (MSCs), and pluripotent stem cells (PSCs), respectively. According to each stem cell type's preference, we also discuss strategies for fabricating hydrogels with biochemical and mechanical cues and other characteristics representing microenvironments of stem cells in vivo. STATEMENT OF SIGNIFICANCE: In this review article we summarize current progress on the construction of hydrogel systems for the culture and expansion of various stem cells, including hematopoietic stem cells (HSCs), mesenchymal stem/stromal cells (MSCs), and pluripotent stem cells (PSCs). The Significance includes: (1) Provide detailed discussion on the stem cell niches that should be considered for stem cell in vitro expansion. (2) Summarize various strategies to construct hydrogels that can largely recapture the microenvironment of native stem cells. (3) Suggest a few future directions that can be implemented to improve current in vitro stem cell expansion systems.

Preparation and characterization of guar gum based polyurethanes

Guar gum (plant-based polysaccharide) is a promising candidate with immense potential. It is used as emulsifier, thickener, stabilizer, and as binding agent in many industries. In the present project, it was planned to synthesize guar gum based polyurethanes by varying the amount of guar gum. Guar gum (GG) was used along with hydroxyl-terminated polybutadiene (HTPB) as soft segment, which was then reacted with isophorone diisocyanate (IPDI) to form PU pre-polymers. In last step, these -NCO terminated pre-polymers were extended with 1,4 butane diol as chain extender. The prepared polyurethane samples were then characterized by using FTIR, solid-state ¹HNMR and X-ray diffraction (XRD). Thermal behavior of the samples was studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Results indicated that the incorporation of guar gum in PU backbone improved its thermal behavior and crystallinity.

Guar gum based nanocomposites: Role in water purification through efficient removal of dyes and metal ions

Researchers nowadays are relentlessly on a race exploring sustainable materials and techniques for the sequestration of toxic dyes and metal ions from water bodies. Biopolymers such as guar gum, owing to its high abundance, low cost and non-toxicity, are potential candidates in this field. Plenty of hydroxyl groups in the polymer backbone enable guar gum to be functionalised or grafted in a versatile manner proving itself as an excellent starting substance for fabricating upgraded materials meant for diverse applications. This review offers a comprehensive coverage of the role of guar gum-based nanocomposites in removal of dyes and heavy metal ions from waste water through adsorption and photo-catalytic degradation. Isotherm and kinetics models, fabrication routes, characterisation techniques, swelling properties and reusability as well as adsorption and degradation mechanisms are outlined. A detailed analysis with convincing results suggests a good future perspective of implementation of these materials in real-time wastewater treatment technology.

Physicochemical characterization, drug release, and biocompatibility evaluation of carboxymethyl cellulose-based hydrogels reinforced with sepiolite nanoclay

Polymer-clay nanocomposite hydrogel films (PCNCHFs) were prepared from caboxymethyl cellulose, polyvinylpyrrolidone, agar and nanosepiolite clay (0, 0.3, 0.5, 0.7, 0.9 and 1.5% reinforcement) by treating thermally in a simple, rapid, and inexpensive route. The PCNCHFs and its 5-fluorouracil (FU)-loaded composites (PCNCHFs@FU) were tested for FU release and characterized by FTIR, XRD, FE-SEM, EDX, DSC, and TGA analyses to investigate their structural, morphological, and thermal properties. The nanosepiolite-loaded polymer composites (PCNCHF1 to PCNCHF5) exhibited higher tensile strength than the pristine polymer hydrogel (PCNCHF0); consequently, the thermal properties (glass- and melting-transition) were improved. The PCNCHFs@FU demonstrated prolonged FU release at pH 7.4 for 32 h. The biocompatibility of PCNCHFs was tested against human skin fibroblast (CCDK) cells. The viability of cells exposed to all PCNCHFs was >95% after 72 h of culture. The live/dead assay show the proliferation of fibroblast cells, confirming the biocompatibility of the hydrogels. The pH-sensitive PCNCHFs@FU release could be suitable for drug release in cancer therapy, and the developed PCNCHFs may also be useful for tissue engineering, food packaging, and other biological applications.

Synthesis, characterization, and biological screening of metal nanoparticles loaded gum acacia microgels

We report novel gum acacia (GA) based microgels composites for multifunctional biomedical application. High yield of spherical GA microgels particles within 5-50 μm size range was obtained via crosslinking the polymer in the reverse micelles of surfactant-sodium bis (2-ethylhexyl) sulfosuccinate (NBSS) in gasoline medium. The prepared microgels were then utilized for in situ silver (Ag) and cobalt (Co) nanoparticles (NPs) synthesis to subsequently produce GNAg and GNCo nanocomposite microgels, respectively. Ag and Co NPs of particle of almost less than 40 nm sizes were homogenously distributed over the matrices of the prepared microgels, and therefore, negligible agglomeration effect was observed. Pristine GA microgels, and the nanocomposite microgels were thoroughly characterized through FTIR, DSC, TGA, XRD, SEM, EDS, and TEM. The well-characterized pristine GA microgels and the nanocomposite microgels were then subjected to multiple in vitro bioassays including antioxidant, antidiabetic, and antimicrobial activities as well as biocompatibility investigation. Our results demonstrate that the prepared nanocomposites in particular GNAg microgels exhibited excellent biomedical properties as compared to pristine GA microgels. Among the prepared samples, GNAg nanocomposites were highly active against Fusarium oxysporum and Aspergillus niger that show 47.73% ± 0.25 inhibition and 32.3% ± 2.0 with IC-50 of 220 μg ml^-1 and 343 μg ml^-1 , respectively. Moderate antidiabetic activity was also observed for GNAg nanocomposites with considerable inhibition of 15.34% ± 0.20 and 14.7% ± 0.44 for both α-glucosidase and α-amylase, respectively. Moreover, excellent antioxidant properties were found for both the GNAg and GNCo nanocomposites as compared to pristine GA microgels. A remarkable biocompatible nature of the nanocomposites in particular GNAg makes the novel GA composites, to be exploited for diverse biomedical applications.

Catalytic Degradability of p-Nitrophenol Using Ecofriendly Silver Nanoparticles

In an effort to produce non-toxic and economically viable “green” protocols for waste water treatment, researchers are actively involved to develop versatile and effective silver nanoparticles (SNPs) as nano-catalyst from bio-based techniques. Since, p-nitrophenol (PNP) is one of the anthropogenic contaminants, considerable attention has been focused in catalytic degradability of PNP in wastewater treatment by curtailing serious effect on aquatic fauna. Ingestion of contaminants by aquatic organisms will not only affect the aquatic species but is also a potential threat to human health, especially if the toxic contaminants are involved in food chain. In this short report, we provided a comprehensive insight on few remarkable nanocatalysts especially based on SNPs and its biopolymer composites synthesized via ecofriendly “green” route. The beneficiality and catalytic performance of these silver nanocatalysts are concisely documented on standard model degradation reduction of PNP to p-aminophenol (PAP) in the presence of aqueous sodium borohydride. The catalytic degradation of PNP to PAP using SNPs follows pseudo first order kinetics involving six-electrons with lower activation energy. Furthermore, we provided a list of highly effective, recoverable, and economically viable SNPs, which demonstrated its potential as nanocatalysts by focusing its technical impact in the area of water remediation.