Preparation and characterization of biodegradable lignin-sulfonate nanoparticles using the microemulsion method to enhance the acetylation efficiency of lignin-sulfonate

Acetylated lignin sulfonate as a biodegradable coating for controlled-release urea fertilizer: A novel acetylation method and diffusion coefficient analysis

Plants require essential nutrients to grow, which soil alone cannot provide. Chemical fertilizers like urea supply the necessary nutrients, including nitrogen. They quickly dissolve in water and can contaminate it with nitrate and nitrite, which can cause diseases. Slow-release fertilizers are a better option to reduce environmental risks. Researchers are exploring cheap and biodegradable alternatives, such as lignin. A critical discussion in the coated urea fertilizer is modeling the nitrogen diffusion process in the coating, which predicts the system's behavior. This article uses lignin sulfonate to coat urea fertilizer, which should first be acetylated with decanoyl chloride. One of the critical parameters is the diffusion coefficient (D). D is determined using the mass transfer flux and the completion time of the effective substance, and with its help, the graph of the total mass transferred from the membrane in a specific time (Mt) is determined. D equals 6.298813 × 10-8 cm2/s using the time lag method. Also, with the fixed-point convergence method, 5.8849 × 10-8 cm2/s was obtained, which has about 0.80 % error with the D obtained by the time lag method. The Mt obtained from the analytical method and the experimental data coincides with a minimal error, which indicates high accuracy.

Proton Exchange Membranes from Sulfonated Lignin Nanocomposites for Redox Flow Battery Applications

Redox flow batteries (RFBs) are increasingly being considered for a wide range of energy storage applications, and such devices rely on proton exchange membranes (PEMs) to function. PEMs are high-cost, petroleum-derived polymers that often possess limited durability, variable electrochemical performance, and are linked to discharge of perfluorinated compounds. Alternative PEMs that utilize biobased materials, including lignin and sulfonated lignin (SL), low-cost byproducts of the wood pulping process, have struggled to balance electrochemical performance with dimensional stability. Herein, SL nanoparticles are demonstrated for use as a nature-derived, ion-conducting PEM material. SL nanoparticles (NanoSLs) can be synthesized for increased surface area, uniformity, and miscibility compared with macrosized lignin, improving proton conductivity. After addition of polyvinyl alcohol (PVOH) as a structural backbone, membranes with the highest NanoSL concentration demonstrated an ion exchange capacity of 1.26 meq g-1, above that of the commercial PEM Nafion 112 (0.98 meq g-1), along with a conductivity of 80.4 mS cm-1 in situ, above that of many biocomposite PEMs, and a coulombic efficiency (CE), energy efficiency (EE) and voltage efficiency (VE) of 91%, 68% and 78%, respectively at 20 mA cm-2. These nanocomposite PEMs demonstrate the potential for valorization of forest biomass waste streams for high value clean energy applications.

The mechanism of self-assembly of lignin in deep eutectic solvent based on sulfamic acid and urea through molecular dynamics simulation

Due to the diversity of industrial lignin sources and the complexity of its structure, its application as a high-value material is limited. Lignin nanoparticles (LNPs) have emerged as a hotspot for research due to their advantages of high specific surface area and high dispersion and the solvent transfer method is commonly used for the preparation of LNPs. In this paper, LNPs were prepared by solvent transfer method using DES based on sulfamic acid and urea (S/U DES) as solvent and water as anti-solvent. To explore the internal mechanism of the self-assembly of nanoparticles, a theoretical model of the solvent system and model lignin compound was constructed with the assistance of quantum chemistry and molecular dynamics theories. Through classical molecular dynamics (MD) simulations, the interaction energy, radius of gyration (ROG), solvent accessible surface area (SASS), radial and spatial distribution function (RDFs/SDFs), hydrogen bonding, and the morphology changes were analyzed to reveal the internal mechanism of self-assembly of model lignin compounds in S/U DES. This study is useful in revealing the mechanism of interaction between lignin and DES, as well as providing a benchmark for the green and efficient preparation of lignin nanoparticles.

A recent advancement on preparation, characterization and application of nanolignin

Each year, 50 to 70 million tonnes of lignin are produced worldwide as by-products from pulp industries and biorefineries through numerous processes. Nevertheless, about 98% of lignin is directly burnt to produce steam to generate energy for the pulp mills and only a handful of isolated lignin is used as a raw material for the chemical conversion and for the preparation of various substances as well as modification of lignin into nanomaterials. Thus, thanks to its complex structure, the conversion of lignin to nanolignin, attracting growing attention and generating considerable interest in the scientific community. The objective of this review is to provide a complete understanding and knowledge of the synthesis methods and functionalization of various lignin nanoparticles (LNP). The characterization of LNP such as structural, thermal, molecular weight properties together with macromolecule and quantification assessments are also reviewed. In particular, emerging applications in different areas such as UV barriers, antimicrobials, drug administration, agriculture, anticorrosives, the environment, wood protection, enzymatic immobilization and others were highlighted. In addition, future perspectives and challenges related to the development of LNP are discussed.

Preparation of Eprinomectin Nanoemulsions and Determination of Their Pharmacokinetics and Pharmacodynamics in Dairy Cows

This study aimed to develop an anthelmintic that leaves no residues and is safe and efficient for use in cows. We constructed classical pseudoternary phase diagrams using experimental animal data to optimize and characterize the eprinomectin nanoemulsion formulas. The emulsion samples prepared with ethyl acetate, polysorbate 80, and 1-propanediol as the main components were transparent and uniform when observed under a Hitachi transmission electron microscope (TEM) system. A Mastersizer 3000 laser particle size analyzer was used to determine the particle sizes of the prepared nanoemulsions. The nanoemulsions were homogeneously dispersed, with an average particle size of 12.61 nm and a polydispersity index of (PDI) 0.297. High-performance liquid chromatography confirmed no statistically significant changes in the samples after 24 months at 4 °C, 25 °C, and 37 °C; the samples exhibited long-term stability. The PK/PD studies confirmed that the injection of eprinomectin nanoemulsions at a dose of 0.2 mg/kg body weight was effective, with a withdrawal period of 0 days for dairy cows. The total extermination rate of the nanoemulsions against adult nematodes was 98.40±1.52%. The AUC_milk/plasma ratio was 0.67±0.03. The optimal dose was found to be 0.2 mg/kg body weight.

Comprehensive characterization of industrial wastewaters using EEM fluorescence, FT-IR and 1H NMR techniques

The organic matter present in six industrial wastewaters (pulp and paper mill, brewery, textile, dairy, slaughterhouse effluents and a municipal landfill leachate) has been studied in this work using three analytical techniques: excitation-emission matrix fluorescence (EEMF), proton nuclear magnetic resonance spectroscopy (¹H NMR) and Fourier transform infrared spectroscopy (FTIR). The pulp and paper mill effluent shows characteristic signals of the presence of lignins, carbohydrates and carboxylic acids, as well as sulfate, carbonate and sulfonates (coming from surfactants used in the cleaning of tanks). The main constituents of the brewery effluent are peptides and proteins coming mainly from spent yeast and diatomite filters (the presence of the latter was confirmed by SiO bands in the FTIR spectrum). The municipal landfill leachate is characterized by the majority presence of humic substances (typical of an old landfill) and a residual presence of small peptides, amino acids and carboxylic acids. Additionally, several inorganic compounds were identified by FTIR, such as nitrate, sulfate, phosphate and cyanide ions. The textile effluent from a cotton-based industry contains carbohydrates, carboxylic acids and sulfonates, which can act as auxochromes in the textile industry. The dairy effluent comprises amino acids and small peptides coming from the biodegradation of milk and whey in addition to carbohydrates (lactose) and carboxylic acids (mainly lactic acid). The presence of tyrosine-like peaks B in the EEMF spectrum of the slaughterhouse effluent indicates the existence of small peptides and amino acids coming from the biodegradation of blood proteins. Additionally, residual glucose, fatty acids, phosphate and sulfate were also identified in this effluent.

Utilization of lignocellulosic biomass: A practical journey towards the development of emulsifying agent

With each passing year, the agriculture and wood processing industries generate increasingly high tonnages of biomass waste, which instead of being burned or left to accumulate should be utilized more sustainably. In parallel, advances in green technology have encouraged large companies and nations to begin using eco-friendly materials, including eco-friendly emulsifiers, which are used in various industries and in bio-based materials. The emulsion-conducive properties of lignocellulosic materials such as cellulose, hemicellulose, and lignin, the building blocks of plant and wood structures, have demonstrated a particular ability to alter the landscape of emulsion technology. Beyond that, the further modification of their structure may improve emulsion stability, which often determines the performance of emulsions. Considering those trends, this review examines the performance of lignocellulosic materials after modification according to their stability, droplet size, and distribution by size, all of which suggest their outstanding potential as materials for emulsifying agents.

Valorization of Rice Straw via Hydrotropic Lignin Extraction and Its Characterization

Rice straw hydrotropic lignin was extracted from p-Toluene sulfonic acid (p-TsOH) fractionation with a different combined delignification factor (CDF). Hydrotropic lignin characterization was systematically investigated, and alkaline lignin was also studied for the contrast. Results showed that the hydrotropic rice straw lignin particle was in nanometer scopes. Compared with alkaline lignin, the hydrotropic lignin had greater molecular weight. NMR analysis showed that β-aryl ether linkage was well preserved at low severities, and the unsaturation in the side chain of hydrotropic lignin was high. H units and G units were preferentially degraded and subsequently condensed at high severity. High severity also resulted in the cleavage of part β-aryl ether linkage. ³¹P-NMR showed the decrease in aliphatic hydroxyl groups and the increasing carboxyl group content at high severity. The maximum weight loss temperature of the hydrotropic lignin was in the range of 330–350 °C, higher than the alkaline lignin, and the glass conversion temperature (T_g) of the hydrotropic lignin was in the range of 107–125 °C, lower than that of the alkaline lignin. The hydrotropic lignin has high β-aryl ether linkage content, high activity, nanoscale particle size, and low T_g, which is beneficial for its further valorization.