Molecular weight dependent structure of the exopolysaccharide levan

Enhancing levan biosynthesis by destroying the strongly acidic environment caused by membrane-bound glucose dehydrogenase (mGDH) in Gluconobacter sp. MP2116

Levan produced by Gluconobacter spp. has great potential in biotechnological applications. However, Gluconobacter spp. can synthesize organic acids during fermentation, resulting in environmental acidification. Few studies have focused on the effects of environmental acidification on levan synthesis. This study revealed that the organic acids, mainly gluconic acid (GA) and 2-keto-gluconic acid (2KGA) secreted by Gluconobacter sp. MP2116 created a highly acidic environment (pH < 3) that inhibited levan biosynthesis. The levansucrase derived from strain MP2116 had high enzyme activity at pH 4.0 ∼ pH 6.5. When the ambient pH was less than 3, the enzyme activity decreased by 67 %. Knocking out the mgdh gene of membrane-bound glucose dehydrogenase (mGDH) in the GA and 2KGA synthesis pathway in strain MP2116 eliminated the inhibitory effect of high acid levels on levansucrase function. As a result, the levan yield increased from 7.4 g/l (wild-type) to 18.8 g/l (Δmgdh) during fermentation without pH control. This study provides a new strategy for improving levan production by preventing the inhibition of polysaccharide synthesis by environmental acidification.

Thermostabilization of a fungal laccase by entrapment in enzymatically synthesized levan nanoparticles

In this work, we present a comprehensive investigation of the entrapment of laccase, a biotechnologically relevant enzyme, into levan-based nanoparticles (LNPs). The entrapment of laccase was achieved concomitantly with the synthesis of LNP, catalyzed by a truncated version of a levansucrase from Leuconostoc mesenteroides. The study aimed to obtain a biocompatible nanomaterial, able to entrap functional laccase, and characterize its physicochemical, kinetic and thermal stability properties. The experimental findings demonstrated that a colloidal stable solution of spherically shaped LNP, with an average diameter of 68 nm, was obtained. An uniform particle size distribution was observed, according to the polydispersity index determined by DLS. When the LNPs synthesis was performed in the presence of laccase, biocatalytically active nanoparticles with a 1.25-fold larger diameter (85 nm) were obtained, and a maximum load of 243 μg laccase per g of nanoparticle was achieved. The catalytic efficiency was 972 and 103 (μM·min)-1, respectively, for free and entrapped laccase. A decrease in kcat values (from 7050 min-1 to 1823 min-1) and an increase in apparent Km (from 7.25 μM to 17.73 μM) was observed for entrapped laccase, compared to the free enzyme. The entrapped laccase exhibited improved thermal stability, retaining 40% activity after 1 h-incubation at 70°C, compared to complete inactivation of free laccase under the same conditions, thereby highlighting the potential of LNPs in preserving enzyme activity under elevated temperatures. The outcomes of this investigation significantly contribute to the field of nanobiotechnology by expanding the applications of laccase and presenting an innovative strategy for enhancing enzyme stability through the utilization of fructan-based nanoparticle entrapments.

Expanding the horizons of levan: from microbial biosynthesis to applications and advanced detection methods

Levan, a β-(2,6)-linked fructose polymer, exhibits diverse properties that impart versatility, rendering it a highly sought-after biopolymer with various industrial applications. Levan can be produced by various microorganisms using sucrose, food industry byproducts and agricultural wastes. Microbial levan represents the most potent cost-effective process for commercial-scale levan production. This study reviews the optimization of levan production by understanding its biosynthesis, physicochemical properties and the fermentation process. In addition, genetic and protein engineering for its increased production and emerging methods for its detection are introduced and discussed. All of these comprehensive studies could serve as powerful tools to optimize levan production and broaden its applications across various industries.

Insights into the heterogeneity of levan polymers synthesized by levansucrase Bs-SacB from Bacillus subtilis 168

Levan is an enzymatically synthesized fructose polymer with widely reported structural heterogeneity depending on the producing levansucrase, the reaction conditions employed for its synthesis and the characterization techniques. We studied here the specific properties of levan produced by recombinant levansucrase from B. subtilis 168 (Bs-SacB), often characterized as a bimodal distribution, that is, a mixture of low and high molecular weight levan. We found significant differences between both levans in terms of the already reported molecular weight, size and morphology using different analytical methods. The low molecular weight levan consists of a non-uniform polymer ranging from 50 to 230 kDa, synthesized through a non-processive mechanism that can spontaneously form spherical nanoparticles in the reaction medium. In contrast, high molecular weight levan is a uniform polymer, most probably synthesized through a processive mechanism, with an average molecular weight of 30,750 kDa and a poorly defined nano-structure. This is the first report exploring differences in morphology between low and high molecular weight levans. Our findings demonstrate that only the low molecular weight levan forms spherical nanoparticles in the reaction medium and that high molecular weight levan is mainly composed of a 33,000 kDa fraction with a microgel behavior.

Mechanism for gel formation of pectin from mealy and crisp lotus rhizome induced by Na+ and D-glucono-d-lactone

Lotus rhizome residue, a cell wall material produced during the production of lotus rhizome starch, has long been underutilized. This study aims to extract pectin-rich polysaccharides from the cell wall of lotus rhizome and investigate their gelation mechanism in order to improve their industrial applicability. The results indicated that both CP and MP (pectin extracted from crisp and mealy lotus rhizome) exhibited a highly linear low methoxyl pectin structure, with the primary linkage mode being →4)-GalpA-(1→. The pectin chains in MP were found to be more flexible than those in CP. Then the impact of Na+, D-glucono-d-lactone (GDL), urea, sodium dodecyl sulfate (SDS), either individually or in combination, on the rheological characteristics of gels was evaluated. The results indicated that gels induced by GDL exhibited favorable thermoreversible properties, whereas the thermoreversibility of Na+-induced gels is poor. In addition to hydrogen bonding and ionic interactions, hydrophobic interactions also play a significant role in the formation of pectin gels. This study offers theoretical guidance and methodologies to improve the utilization rate of lotus rhizome starch processing by-products, while also provides novel insights into the correlation between LMP structure and gelation mechanism.

Inulin from halophilic archaeon Haloarcula: Production, chemical characterization, biological, and technological properties

Halophilic archaea are capable of producing fructans, which are fructose-based polysaccharides. However, their biochemical characterization and biological and technological properties have been scarcely studied. The aim of this study was to evaluate the production, chemical characterization, biological and technological properties of a fructan inulin-type biosynthesized by a halophilic archaeon. Fructan extraction was performed through ethanol precipitation and purification by diafiltration. The chemical structure was elucidated using Fourier Transform-Infrared Spectroscopy and Nuclear Magnetic Resonance (NMR). Haloarcula sp. M1 biosynthesizes inulin with an average molecular weight of 8.37 × 106 Da. The maximal production reached 3.9 g of inulin per liter of culture within seven days. The glass transition temperature of inulin was measured at 138.85 °C, and it exhibited an emulsifying index of 36.47 %, which is higher than that of inulin derived from chicory. Inulin from Haloarcula sp. M1 (InuH) demonstrates prebiotic capacity. This study represents the first report on the biological and technological properties of inulin derived from halophilic archaea.

New perspectives into Gluconobacter-catalysed biotransformations

Different from other aerobic microorganisms that oxidise carbon sources to water and carbon dioxide, Gluconobacter catalyses the incomplete oxidation of various substrates with regio- and stereoselectivity. This ability, as well as its capacity to release the resulting products into the reaction media, place Gluconobacter as a privileged member of a non-model microorganism class that may boost industrial biotechnology. Knowledge of new technologies applied to Gluconobacter has been piling up in recent years. Advancements in its genetic modification, application of immobilisation tools and careful designs of the transformations, have improved productivities and stabilities of Gluconobacter strains or enabled new bioconversions for the production of valuable marketable chemicals. In this work, the latest advancements applied to Gluconobacter-catalysed biotransformations are summarised with a special focus on recent available tools to improve them. From genetic and metabolic engineering to bioreactor design, the most recent works on the topic are analysed in depth to provide a comprehensive resource not only for scientists and technologists working on/with Gluconobacter, but for the general biotechnologist.

Characterization of levansucrase produced by novel Bacillus siamensis and optimization of culture condition for levan biosynthesis

Levan has attracted interest due to the potential health benefits associated with its prebiotic, biological, and functional properties. However, the production of levan is expensive due to its high resource requirements. With the growing demand for levan, it is vital to determine suitable cultivation condition for its production and reduce costs accordingly. The present study characterized the enzyme levansucrase produced by a novel strain of Bacillus siamensis and optimized the conditions for the biosynthesis of levansucrase and levan. The crude levansucrase enzyme production by B. siamensis was induced at a specific temperature in a medium containing different concentrations of sucrose, fructose, and glucose to evaluate transfructosylation and hydrolysis activities. Crude levansucrase significantly increased transfructosylation relative to hydrolysis activity at 37 °C in a medium containing 20% (w/v) sucrose. Both transfructosylation and hydrolysis activities were inhibited in glucose and fructose containing medium. Purification and characterization of the levansucrase were performed by precipitating the enzyme with ammonium sulfate solution, purified anion-exchange chromatography, and analyzed by Sodium Dodecyl Sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The results showed the molecular weight of the enzyme to be approximately 30 kDa with specific activity at 15.95 U/mg, corresponding to a protein purification efficiency of 11.47 and a yield of 78.75%. The optimal culture condition for the purified-levansucrase activity for levan biosynthesis was obtained at 37 °C after 48 h, at pH 6.0 in 50 mM phosphate buffer and 20% (w/v) sucrose. The study demonstrated the optimized condition for levan biosynthesis utilizing the B. siamensis that can serve as a model for various commercial and industrial applications for efficient levan production.

Influence of Levan on the Thermally Induced Gel Formation of β-Lactoglobulin

In this study, the influence of levan on the phase behavior and the thermally induced gelation of the mixed β-lactoglobulin—levan gels as a function of polymer content, molecular weight and ionic strength was characterized. For this purpose, rheology was used to study the mechanical properties of the gels and the water binding of the network structure was investigated by time domain nuclear magnetic resonance. Phase behavior and network type were analyzed by optical observation and electron microscopy. Levan enhanced the aggregation and gel formation of β-lg due to segregative forces between the polymer species. Segregation was caused by the excluded volume effect and was more pronounced at lower ionic strength, higher levan contents and higher levan molecular weights. The presence of levan increased the water binding of the gel networks. However, this effect decreased with increasing levan content. At high ionic strength and high levan content, phase separated gels were formed. While segregative forces enhanced network formation, and therefore, increased the gel strength of mixed gels at low ionic strength, levan had also antagonistic effects on the network formation at high ionic strength and high polymer contents.

The C-Terminal Domain of Liquorilactobacillus nagelii Dextransucrase Mediates the Production of Larger Dextrans Compared to Liquorilactobacillus hordei

Dextransucrases released by certain lactic acid bacteria form glucose polymers with predominantly α-1,6-linkages and may be exploited biotechnologically for the tailored production of polysaccharides with application potential. Despite releasing two closely related dextransucrases, previous studies showed that water kefir borne Liquorilactobacillus (L.) hordei TMW 1.1822 and L. nagelii TMW 1.1827 produce different amounts of polysaccharides with distinct particle sizes (molecular weight and radius of gyration) and molecular architectures. To investigate where these differences originate and thus to provide deeper insights into the functionally diverse nature of polysaccharide formation during water kefir fermentation, we constructed two variants of the L. nagelii dextransucrase—a full-length enzyme and a truncated variant, devoid of a C-terminal glucan-binding domain that reflects the domain architecture of the L. hordei dextransucrase—and applied them at various enzyme concentrations to form dextran over 24 h. The full-length enzyme exhibited a high activity, forming constant amounts of dextran until a four-fold dilution, whereas the truncated variant showed a gradual decrease in activity and dextran formation at an increasing dilution. The application of the full-length enzyme resulted in higher average particle sizes compared to the truncated variant. However, the dilution of the enzyme extracts also led to a slight increase in the average particle size in both enzymes. Neither the domain architecture nor the enzyme concentration had an impact on the structural architecture of the dextrans. The presented results thus suggest that the comparatively higher processivity of the L. nagelii dextransucrase is predominantly caused by the additional C-terminal glucan-binding domain, which is absent in the L. hordei dextransucrase. The average particle size may be influenced, to some extent, by the applied reaction conditions, whereas the structural architecture of the dextrans is most likely caused by differences in the amino acid sequence of the catalytic domain.

Production of levan from Bacillus subtilis var. natto and apoptotic effect on SH-SY5Y neuroblastoma cells

Levan is a high-valued polysaccharide of fructose produced by several microbial species. These polysaccharides have been described as effective therapeutic agents in some human disease conditions, such as cancer, heart diseases and diabetes. The objective of this study was to examine the effect of levan (β-(2 → 6)-fructan) produced through sucrose fermentation by B. subtilis var. natto on the proliferation rate, cytotoxicity, and apoptosis of human neuroblastoma SH-SY5Y cells. It was obtained 41.44 g/L of levan in 18 h by biotechnological fermentation and SH-SY5Y cells were exposed to 1000 μg/mL of levan. The treatment with 1000 μg/mL of levan induced apoptosis in SH-SY5Y cancer cells by the significant increase in Annexin V/7-AAD and caspase 3/7 activation, but did not decrease proliferation or triggered a cytotoxic effect. 1000 μg/mL levan treatment is a promising therapeutic strategy for SH-SY5Y neuroblastoma cells.

Development and Characterization of Two Types of Surface Displayed Levansucrases for Levan Biosynthesis

Levan has wide applications in chemical, cosmetic, pharmaceutical and food industries. The free levansucrase is usually used in the biosynthesis of levan, but the poor reusability and low stability of free levansucrase have limited its large-scale use. To address this problem, the surface-displayed levansucrase in Saccharomyces cerevisiae were generated and evaluated in this study. The levansucrase from Zymomonas mobilis was displayed on the cell surface of Saccharomyces cerevisiae EBY100 using a various yeast surface display platform. The N-terminal fusion partner is based on a-agglutinin, and the C-terminal one is Flo1p. The yield of levan produced by these two whole-cell biocatalysts reaches 26 g/L and 34 g/L in 24 h, respectively. Meanwhile, the stability of the surface-displayed levansucrases is significantly enhanced. After six reuses, these two biocatalysts retained over 50% and 60% of their initial activities, respectively. Furthermore, the molecular weight and polydispersity test of the products suggested that the whole-cell biocatalyst of levansucrase displayed by Flo1p has more potentials in the production of levan with low molecular weight which is critical in certain applications. In conclusion, our method not only enable the possibility to reuse the enzyme, but also improves the stability of the enzyme.

Wound Healing Promotion by Hyaluronic Acid: Effect of Molecular Weight on Gene Expression and In Vivo Wound Closure

Hyaluronic acid (HA) has been known to play an important role in wound healing process. However, the effect of molecular weight (MW) of exogenously administered HA on the wound healing process has not been fully understood. In this study, we investigated HA with different MWs on wound healing process using human epidermal keratinocytes and dermal fibroblasts. Cell proliferation and migration ability were assessed by water soluble tetrazolium (WST) assay and wound scratch assay. We examined the effect of HA addition in a full-thickness wound model in mice and the gene expression related to wound healing. Proliferation and migration of HaCaT cells increased with the increase of MW and concentration of HA. Interleukin (IL-1β), IL-8 and vascular endothelial growth factor (VEGF) as well as matrix metalloproteinase (MMP)-9 and MMP-13 were significantly upregulated by high molecular weight (HMW) HA in keratinocytes. Together with VEGF upregulation and the observed promotion of HaCaT migration, HA with the MW of 2290 kDa may hold potential to improve re-epithelialization, a critical obstacle to heal chronic wounds.

Bacterial exopolysaccharides: Chemical structures, gene clusters and genetic engineering

In recent decades, the composition, structure, biosynthesis, and function of bacterial extracellular polysaccharides (EPS) have been extensively studied. EPS are synthesized through different biosynthetic pathways. The genes responsible for EPS synthesis are usually clustered on the genome or large plasmids of bacteria. Generally, different EPS synthesis gene clusters direct the synthesis of EPS with different chemical structures and biological activities. A better understanding of the gene functions involved in EPS biosynthesis is critical for the production of EPS with special biological activities. Genetic engineering methods are usually used to study EPS synthesis related genes. This review organizes the available information on EPS, including their structures, synthesis of related genes, and highlights the research progress of modifying EPS gene clusters through gene-editing methods.