Dialdehyde cellulose nanocrystals act as multi-role for the formation of ultra-fine gold nanoparticles with high efficiency

Scutellaria baicalensis Polysaccharide-Mediated Green Synthesis of Smaller Silver Nanoparticles with Enhanced Antimicrobial and Antibiofilm Activity

Silver nanoparticles (AgNPs) have attracted widespread attention in multidrug-resistant bacterial infections. However, the application of AgNPs synthesized by conventional methods is restricted by its high costs, toxicity, and poor stability. Herein, a water-soluble polysaccharide (Scutellaria baicalensis polysaccharide, SBP) rich in reducing sugars was used as both the reductant and stabilizer to greenly synthesize spherical AgNPs@SBP with smaller particle sizes (11.18 ± 2.50 nm) and higher negative zeta potential (-23.05 ± 2.76 mV), which was favorable to enhance its antimicrobial activity and improve pH and thermal stability. Besides, SBP facilitated the adhesion and penetration of AgNPs@SBP to methicillin-resistant Staphylococcus aureus (MRSA) and carbapenem-resistant Escherichia coli (CREC), thus significantly enhancing its antibacterial activity (increased by 32-fold and 64-fold, respectively). Likewise, AgNPs@SBP at a low concentration (7.8 μg/mL) could effectively penetrate and inhibit nearly 90% of MRSA and CREC biofilm formation. Antimicrobial mechanism studies showed that AgNPs@SBP could lead to more severe cell membrane damage and genetic material leakage by upregulating reactive oxygen species and depolarizing mitochondrial membrane potential, ultimately resulting in the apoptosis of bacteria. Overall, the wrapping of SBP significantly enhanced the antibacterial and antibiofilm activity of AgNPs, which possessed great potential in the prevention and treatment of multidrug-resistant bacterial infections.

Chemically tailored molecular surface modification of bamboo pulp fibers for manipulating the electret performance of electret filter media

The surface chemical composition of materials is essential for regulating their charge trapping and storage capabilities, which directly affect their electret performance. Although chemical modification of materials to alter electret performance has been investigated, the mechanism through which electret properties are regulated more systematically via chemical customization has not been elucidated in detail. Herein, p-phenylenediamine, benzidine and 4,4'-diaminotriphenyl, which have different conjugated strength functional groups, were selected to chemically tailor the surface of bamboo pulp fibers to regulate the electret properties and elucidate the regulatory mechanism more systematically. The results showed that the charge trapping and storage properties of materials could be regulated by introducing functional groups with different conjugated strengths to their surfaces, realizing the regulation of the electret properties. Moreover, the charge trapping and storage ability could be tailored more specifically by regulating the number of functional groups. By chemical customization to provide electrostatic effects to the materials, the purification time was reduced by approximately 45 %-52 %. More importantly, a relatively systematic mechanism was proposed to elucidate the effect of the conjugate group strength on the charge trapping and charge storage properties of the material. These findings will provide guidance for the investigation of chemical modifications to regulate the electret performance of materials.

Schiff Base Functionalized Cellulose: Towards Strong Support-Cobalt Nanoparticles Interactions for High Catalytic Performances

A new hybrid catalyst consisting of cobalt nanoparticles immobilized onto cellulose was developed. The cellulosic matrix is derived from date palm biomass waste, which was oxidized by sodium periodate to yield dialdehyde and was further derivatized by grafting orthoaminophenol as a metal ion complexing agent. The new hybrid catalyst was characterized by FT-IR, solid-state NMR, XRD, SEM, TEM, ICP, and XPS. The catalytic potential of the nanocatalyst was then evaluated in the catalytic hydrogenation of 4-nitrophenol to 4-aminophenol under mild experimental conditions in aqueous medium in the presence of NaBH4 at room temperature. The reaction achieved complete conversion within a short period of 7 min. The rate constant was calculated to be K = 8.7 × 10-3 s-1. The catalyst was recycled for eight cycles. Furthermore, we explored the application of the same catalyst for the hydrogenation of cinnamaldehyde using dihydrogen under different reaction conditions. The results obtained were highly promising, exhibiting both high conversion and excellent selectivity in cinnamyl alcohol.

Bifunctional lignocellulose nanofiber hydrogel possessing intriguing pH-responsiveness and self-healing capability towards wound healing applications

Lignocellulose nanofibers (LCNF) obtained from agricultural waste are potential candidates for enhancing composite materials because of their excellent mechanical properties, abundant groups and high biocompatibility. However, the application of LCNF has received limited attention to date from researchers in the healthcare field. Herein, based on the bifunctional group (carboxyl and aldehyde groups) modified LCNF (DCLCNF) and chitosan (CS), we developed a multifunctional bio-based hydrogel (CS-DCLCNF). The addition of lignin-containing DCLCNF strengthened the internal crosslinking and the intermolecular interaction of hydrogels, and the presence of lignin and carboxyl groups increased the mechanical strength of the hydrogel and the adsorption of aromatic drugs. Results revealed that the hydrogels exhibited self-healing, injectable, and high swelling rates. The hydrogels had favorable mechanical strength (G'max of ~16.60 kPa), and the maximum compressive stress was 24 kPa. Moreover, the entire tetracycline hydrochloride (TH) release process was slow and pH-responsive, because of the rich noncovalent and π-π interactions between DCLCNF and TH. The hydrogels also exhibited excellent biocompatibility and antibacterial properties. Notably, the wound healing experiment showed that the hydrogels were beneficial in accelerating wounds healing, which could heal completely in 13 days. Therefore, CS-DCLCNF hydrogels may have promising applications in drug delivery for wound healing.

Aldehyde modified nanocellulose-based fluorescent hydrogel toward multistage data security encryption

In view of the insecurity of encode information storage based on fluorescence switch single-stage encryption, a fluorescent hydrogel for multistage data security encryption were proposed, named as polyvinyl alcohol/dialdehyde cellulose nanofibrils/carbon quantum dots hydrogel. Herein, the interpenetrating network was formed by chemically crosslinking between polyvinyl alcohol (PVA) and dialdehyde cellulose nanofibrils (DACNF). Additionally, nitrogen-doped carbon quantum dots (CDs) synthesized by one-step hydrothermal method were introduced into the above hydrogel system by hydrogen bonds. The resultant fluorescent hydrogels possessed high stretchability up to 530 %, good strength of 0.96 MPa, Fe3+-responsive fluorescence quenching, fluorescence recovery triggered by ascorbic acid and borax-triggered shape memory. Moreover, various complex 3D hydrogel geometries were fabricated by folding/assembling 2D fluorescent hydrogel sheets, extending data encryption capability from 2D plane to 3D space. More remarkably, the 3D data encryption-erasing process of fluorescent hydrogel was realized by the strategy of alternating treatment of Fe3+ solution and ascorbic acid solution. This work provided a facile and general strategy for constructing high security important information encryption and protection.

Aldehyde modified cellulose-based dual stimuli responsive multiple cross-linked network ionic hydrogel toward ionic skin and aquatic environment communication sensors

Recently, materials with complicated environmentally-sensitive abilities, high stretchability and excellent conductive sensitivity are interesting actuators in future applications. Herein, we fabricated a versatile and facile polyvinyl alcohol/polyacrylic acid/dialdehyde cellulose nanofibrils-Fe3+ hydrogel integrated with programmable dual-shape memory properties, high mechanical strength, good recoverability, and heat-induced self-healing capability. Benefiting from the synergistic effect of hydrogen bonds and dual metal coordination bonds of cellulose-based dialdehyde and carboxyl with Fe3+and then heating-freeze-thawing cycle treatment, the obtained hydrogel exhibited dual shape memory abilities, high tensile strain (up to 600 %), good self-recovery, and anti-fatigue properties. Moreover, the resultant hydrogel sensors showed revealed high strain sensitivity (gauge factor = 2.95) and satisfactory electrochemical performance; and such hydrogel-based sensor could be used as ionic skin to detect various human motions in real-time and barrier-free communication in the aquatic environment. The composite hydrogel with superior and versatile performances reported in this study could offer a great promise to be applied under extreme conditions as multifunctional sensors.

Dialdehyde Cellulose Solution as Reducing Agent: Preparation of Uniform Silver Nanoparticles and In Situ Synthesis of Antibacterial Composite Films with High Barrier Properties

The demand for antimicrobial materials is gradually increasing due to the threat of infections and diseases caused by microorganisms. Silver nanoparticles (AgNPs) are widely used because of their broad-spectrum antimicrobial properties, but their synthesis methods are often environmentally harmful and AgNPs difficult to isolate, which limits their application in several fields. In this study, an aqueous solution of dialdehyde cellulose (DAC) was prepared and used as a reducing agent to synthesize AgNPs in an efficient and environmentally friendly process. The synthesized AgNPs can be easily separated from the reducing agent to expand their applications. In addition, the AgNPs were immobilized in situ on dialdehyde cellulose to form antibacterial composite films. The results showed that the prepared silver nanoparticles were mainly spherical and uniformly dispersed, with an average size of about 25 nm under optimal conditions. Moreover, the dialdehyde cellulose–nanosilver (DAC@Ag) composite films had excellent mechanical properties, positive transparency, ultraviolet-blocking properties, and effective antibacterial activity against E. coli and S. aureus. Notably, the composite films exhibited excellent oxygen and water vapor barrier properties, with WVT and ORT of 136.41 g/m2·24 h (30 °C, 75% RH) and <0.02 cm3/m2·24 h·0.1 MPa (30 °C, 75% RH), respectively, better than commercial PE films. Hence, this study not only provides an environmentally friendly method for the preparation of silver nanoparticles, but also offers a simple and novel strategy for the in situ synthesis of silver-loaded antibacterial composite films.

Dialdehyde modification of laminarin for facile synthesis of ultrafine silver nanoparticles with excellent antibacterial and wound healing properties

Laminarin is a promising marine biopolymer that is abundant, non-toxic, and biodegradable. However, laminarin has a weak reduction potential for metal ions, resulting in the synthesis of a lower content of large-sized silver nanoparticles (AgNPs). Here, we showed that after the introduction of aldehyde groups, the reduction potential of laminarin increased, decreasing the synthesis time and increasing the density of AgNPs. ¹H NMR and FT-IR confirmed the addition of aldehyde groups on laminarin. The dialdehyde-modified laminarin (DLAM) showed in situ, simple, and rapid synthesis of ultrasmall-sized spherical AgNPs (<10 nm), as revealed by TEM images. The aldehyde and carboxyl groups of DLAM act as synchronized reducing and anchoring agents. The conversion of Ag ions into AgNPs-DLAM was confirmed by UV-Vis spectrophotometer, FTIR, XRD, and XPS analysis. The AgNPs-DLAM showed significantly enhanced antibacterial activities than silver ions against Escherichia coli and Staphylococcus aureus via causing morphological changes and pore formations in bacterial cells. The AgNPs-DLAM also inhibited bacterial biofilm formation. In contrast, the AgNPs-DLAM showed negligible toxicity toward human keratinocytes. Furthermore, AgNPs-DLAM increased the migration of human keratinocytes, indicating efficient wound healing properties. Thus, signifying the importance of AgNPs-DLAM in clinical applications.

One-step synthesis of gold nanoparticles for catalysis and SERS applications using selectively dicarboxylated cellulose and hyaluronate

Properties and applications of gold nanoparticles (AuNPs) depend on their characteristics which are intrinsically connected to the reducing and capping agents used in their synthesis. Although polysaccharides are commonly used for Au salt reduction, the control over the result is often limited. Here, the selectively dicarboxylated cellulose (DCC) and hyaluronate (DCH) with adjustable composition and molecular weight are used for the first time as reducing and capping agents for AuNPs preparation in an environmental friendly one-step synthesis. Mechanism of reduction and structure-function relationships between the composition of oxidized polysaccharides and properties of formed AuNPs are elucidated and the variances in the macromolecular architecture of dicarboxypolysaccharides are applied to guide the growth of AuNPs. While the homogenous structure and high density of carboxyl groups of fully-oxidized DCC induced isotropic growth of small and uniform AuNPs with good catalytic performance (d = ~20 nm, TOF = 7.3 min^-1, k = 1.47 min^-1), the lower stabilizing potential and slower reduction rates of the DCH induced the anisotropic growth of larger polyhedral ~50 nm nanoparticles, which increased the Surface-Enhanced Raman Scattering efficacy (9× stronger Raman signals on average compared to AuDCC). The use of dicarboxypolysaccharides with adjustable composition and properties thus introduced a new degree of freedom for the preparation of AuNPs with desired properties.

Gold nanoparticles spontaneously grown on cellulose nanofibrils as a reusable nanozyme for colorimetric detection of cholesterol in human serum

Recently, gold nanoparticles (AuNPs) are extensively used as peroxidase mimics. However, low catalytic activity, high synthesis cost, substrate-induced aggregation in reaction medium and difficulty in recovery and reuse still remain as major challenges. Here, a novel, simple, spontaneous, and reagent-less in-situ method for the production of AuNPs using dialdehyde cellulose nanofibrils (DACNF) is proposed. AuNPs synthesis time and size were greatly influenced by aldehyde content and the optimal aldehyde content for ultra-small AuNPs (≈10 nm) was 2.1 mM/g. AuNPs@DACNFs exhibited broad-spectrum peroxidase activity and steady-state kinetics revealed their better kinetic parameters (low K_m and high V_max) over horseradish peroxidase (HRP). AuNPs@DACNFs was further converted into paper strip, which served as a biosensor for H₂O₂ and cholesterol detection. The proposed method exhibited wide linear response in the range of 10-90 μM and 0.05-0.45 mM, and detection limit of 0.39 μM and 1.9 μM for H₂O₂ and cholesterol, respectively. Great shelf life and reusability were evident by FE-SEM and ICP-OES analysis. The smartphone application "Color Grab" was used to enable the portable onsite detection. The results of cholesterol detection in human serum samples were in agreement with clinically observed values, suggesting the great potential of the probe in disease diagnosis.

Synergy coordination of cellulose-based dialdehyde and carboxyl with Fe3+ recoverable conductive self-healing hydrogel for sensor

A novel dual ionic network cellulose-based composite conductive self-healing hydrogel was fabricated with high elongation, rapid recoverability, high conductive sensitivity, self-healing ability and good biocompatibility. The hydrogel was constructed by the synergistic complexations of new-fashioned bidentate aldehyde groups on dialdehyde cellulose nanofibers (DACNFs) and carboxyl groups of acrylic acid (AA) with Fe³⁺. The elongation (~1300%) of the hydrogel containing 1 wt% DACNFs was approximate 13-fold of the pure PAA hydrogel and can recover to original state within 2 min after 80% compression. The self-healing efficiency increased with the addition of DACNFs in the dual ionic network cellulose-based composite conductive self-healing hydrogel. The hydrogel configured for a wearable test and showed high stretching sensitivity with a gauge factor of 13.82 at strain within 1.6%. The gauge factor (GF) decrease with the incremental strain within 20%. GF were 0.696 between 20% and 300% strain, 0.837 within 300% and 500%. Meanwhile, the current had a good linear relationship with the bending angles of hydrogels and pressure on hydrogels, which may provide a great potential in monitor both minor variations and large movements.