Extraction of basil seed mucilage using ionic liquid and preparation of AuNps/mucilage nanocomposite for catalytic degradation of dye

Gold nanoparticles supported on aldehyde-functionalized chitin nanocrystals as efficient catalysts in environmental catalysis

Gold nanoparticles (AuNPs) with ultra-small size anchored onto support materials is highly desired towards good catalytic performance. In this study, aldehyde-functionalized chitin nanocrystals (ChNCs-PVMA) are prepared by surface-initiated electron transfer atom transfer radical polymerization (SI-ARGET ATRP) with vanillin methacrylate (VMA) as a functional monomer, which are used as reductant, stabilizer and support for the fabrication of AuNPs through an environmentally friendly process that eliminates the need for any additional reducing agents. The abundant aldehyde groups of the prepared ChNCs-PVMA are crucial to achieve ultra-small AuNPs with average size of 5.3 nm. The obtained Au@ChNCs-PVMA nanohybrid catalysts were systematically characterized by FTIR, XPS, XRD and TEM. Finally, the catalytic activity of the Au@ChNCs-PVMA catalysts are investigated for reduction of 4-NP and discoloration of azo/non-azo dyes, demonstrating excellent catalytic performance and reusability. These findings provide significant insights into the development of bio-supported nanohybrid catalyst for various environmental catalysis.

Ag-Cu2O Supported Biomass-Derived rGO for Catalyzing Suzuki-Miyaura Cross-Coupling

The search for cost-effective, efficient, and ecofriendly heterogeneous catalysts for the Suzuki-Miyaura reaction is crucial due to challenges with expensive, toxic homogeneous catalysts. This study centrally aims at crafting a pioneering green catalyst by adorning reduced graphene oxide (rGO), sourced from basil seeds (Ocimum basilicum L.), with an Ag-Cu2O composite structure. Comprehensive characterization of the Ag-Cu2O/rGO nanocomposite was conducted through FTIR, SEM, hHR-TEM, EDS, XPS, XRD, TGA, and N2 adsorption/desorption analyses. Results showed that nanosized Ag-Cu2O particles were partially integrated into rGO sheets derived from basil seeds, acting as active species for oxidative addition with aryl halides in the SMR. The catalytic efficacy of this robust nanocatalyst was assessed in Suzuki-Miyaura cross-coupling reactions, targeting the synthesis of biaryls employing various aryl halides and aryl boronic acids. The findings underscore that the Ag-Cu2O/rGO nanocatalyst manifests rapid reaction kinetics (15 min) alongside commendable yields (99%). The Ag-Cu2O/rGO demonstrates impressive recyclability, maintaining catalytic efficiency over four cycles. Utilizing it as a green substrate for metal loading highlights its potential, offering well-defined coordination sites. This approach facilitates stable heterogeneous catalyst fabrication, crucial for significant bond formations. Notable features include broad applicability, exceptional functional tolerance, scalability, and practicality. Moreover, it holds promise for automating safe processes and enabling efficient late-stage functionalization of complex molecules with moderate to high efficiency, presenting promising prospects for various applications in chemical synthesis.

Unlocking the potential of Opuntia species mucilage in chemistry

Herein, we describe a detailed protocol to extract the mucilage from different species of the genus Opuntia spp. (i.e., Opuntia Ficus (OFi), Opuntia Dillenii (ODi) and Opuntia Robusta (ORo)). The extracted mucilage was characterized by NMR, FTIR-ATR, HPLC, and TGA. OFi was found to have the highest phenolic content, 7.84 ± 1.93 mg catechol/g mucilage. The mucilage from the three species were characterized by having a high content of monosaccharides, being mannose and glucose the most abundant components (ca. 48-73 % and 23-35 %, respectively). In the context of biomass revalorization, the mucilage was proven to serve as a reducing and stabilizing agent in the synthesis of gold nanoparticles (AuNP/mucilage). The synthesis was optimized with a mucilage concentration of 2 mg/mL using 12.5 μL of KAuCl4 and was carried out at 80 °C for 90 min. This protocol afforded spherical nanoparticles with an average size of 9.7 ± 4.0 nm that were stable for at least 14 days, as demonstrated by TEM. Synthesized AuNP/mucilage was evaluated as a plasmonic catalyst for the reduction of 4-nitrophenol as model reaction, showing a considerable enhancement in its kapp of 97 % under white light and a decrease of 24.8 % in its activation energy.

Nanocellulose Sponges Containing Antibacterial Basil Extract

Nanocellulose (NC) is a valuable material in tissue engineering, wound dressing, and drug delivery, but its lack of antimicrobial activity is a major drawback for these applications. In this work, basil ethanolic extract (BE) and basil seed mucilage (BSM) were used to endow nanocellulose with antibacterial activity. NC/BE and NC/BE/BSM sponges were obtained from nanocellulose suspensions and different amounts of BE and BSM after freeze-drying. Regardless of the BE or BSM content, the sponges started to decompose at a lower temperature due to the presence of highly volatile active compounds in BE. A SEM investigation revealed an opened-cell structure and nanofibrillar morphology for all the sponges, while highly impregnated nanofibers were observed by SEM in NC/BE sponges with higher amounts of BE. A quantitative evaluation of the porous morphology by microcomputer tomography showed that the open porosity of the sponges varied between 70% and 82%, being lower in the sponges with higher BE/BSM content due to the impregnation of cellulose nanofibers with BE/BSM, which led to smaller pores. The addition of BE increased the specific compression strength of the NC/BE sponges, with a higher amount of BE having a stronger effect. A slight inhibition of S. aureus growth was observed in the NC/BE sponges with a higher amount of BE, and no effect was observed in the unmodified NC. In addition, the NC/BE sponge with the highest amount of BE and the best antibacterial effect in the series showed no cytotoxic effect and did not interfere with the normal development of the L929 cell line, similar to the unmodified NC. This work uses a simple, straightforward method to obtain highly porous nanocellulose structures containing antibacterial basil extract for use in biomedical applications.

Antioxidant activity of nanoencapsulated chia (Salvia hispanica L.) seed extract and its application to manufacture a functional cheese

The study aimed to produce a functional ricotta cheese with chia seed extract (CSE) nanocapsules. First, the CSE was encapsulated using lecithin and basil seed gum, and its characteristics and antioxidant activity (AA) were evaluated. The free CSE (F-CSE) and encapsulated CSE (E-CSE) were then added to ricotta cheese formulation (1.5 and 3.0% w/w). The samples were kept for 15 days in a refrigerator and their physicochemical, sensory properties, AA, and oxidative stability were examined. The particle size, polydispersity index, zeta potential, and encapsulation efficiency of CSE nanocapsules were 59.23 nm, 0.328, -44.47 mV, and 80.06%, respectively. The CSE showed remarkable AA in vitro. The AA of F-CSE was higher than E-CSE. The moisture, dry matter, fat, and protein content of cheese samples were in the range of 52.64%-53.31%, 46.69%-47.36%, 19.02%-19.28%, and 16.88%-17.02%, respectively. The color of F-CSE cheeses was slightly yellower than control; however, they did not have clear color differences. During storage, the acidity, hardness, chewiness, and peroxide value of cheeses increased, while the pH, total phenol content, and AA decreased (p < .05). The addition of CSE reduced the rate of pH and acidity changes during storage and significantly increase the AA and oxidative stability. Initially, F-CSE cheeses had higher functional activity, but on other storage days, due to the protective effect of coating materials, the functional activity of E-CSE samples was higher. The CSE, especially E-CSE, did not have an adverse effect on the sensory properties of cheese. Based on the results of this study, it can be concluded that it is possible to manufacture a functional cheese using E-CSE.

Multi-Responsive Optimization of Novel pH-Sensitive Hydrogel Beads Based on Basil Seed Mucilage, Alginate, and Magnetic Particles

Conventional drug delivery systems often cause side effects and gastric degradation. Novel drug delivery systems must be developed to decrease side effects and increase the efficacy of drug delivery. This research aimed to fabricate hydrogel beads for use as a drug delivery system based on basil seed mucilage (BSM), sodium alginate (SA), and magnetic particles (MPs). The Taguchi method and Grey relational analysis were used for the design and optimization of the hydrogel beads. Three factors, including BSM, SA, and MPs at four levels were designed by L-16 orthogonal arrays. BSM was the main factor influencing bead swelling, drug release rate at pH 7.4, and release of antioxidants at pH 1.2 and 7.4. In addition, SA and MPs mainly affected drug loading and drug release rate in acidic medium, respectively. Grey relational analysis indicated that the composition providing optimal overall properties was 0.2 vol% BSM, 0.8 vol% SA, and 2.25 vol% MPs. Based on the findings of this work, BSM/SA/MPs hydrogel beads have the potential to be used as a pH-sensitive alternative material for drug delivery in colon-specific systems.

Enhancing catalytic potential of gold nanoparticles by linear and cross-linked polyurethane blending

This work describes the synthesis of gold nanoparticles (AuNPs) and their subsequent stabilization using a water-borne polyurethane matrix of micro-particles (Au/PU) by a heating method. Composites were prepared both from linear and cross-linked polyurethane (LPU and CPU). Catalytic activities of synthesized composites exhibiting 226.4 nm size were evaluated for reduction of Congo red dye. More than 90% Congo red degradation was achieved in just 6 minutes with Au/LPU. Under similar conditions, 30% of dye was degraded with Au/CPU composite in 5 minutes. The effects of different variables such as concentration of dye, catalyst dose and concentration of reagents have been optimized. The degradation process followed first order kinetics. The most efficient composite (Au/LPU) was characterized using UV/Vis, FTIR, SEM, XRD and DLS techniques. The excellent catalytic activity can be attributed to the polyurethane matrix making the dye available to catalytic sites (AuNPs).