An upgraded and universal strategy to reinforce chitosan/polyvinylpyrrolidone film by incorporating active silica nanorods derived from natural palygorskite

Dencichine/palygorskite nanocomposite incorporated chitosan/polyvinylpyrrolidone film for accelerating wound hemostasis

The development of efficient, safe, environmentally friendly, and user-friendly hemostatic dressings remains a great challenge for researchers. A variety of clay minerals and plant extracts have garnered considerable attention due to their outstanding hemostatic efficacy and favorable biosafety. In this study, a facile solution casting strategy was employed to prepare nanocomposite films by incorporating natural nanorod-like palygorskite (Pal) and herb-derived hemostat dencichine (DC) based on chitosan and polyvinylpyrrolidone. The dynamic blood clotting index demonstrated that the nanocomposite film with a DC addition of 1.0 wt% exhibited significantly superior hemostatic properties compared to both pure DC powder or commercial hemostatic agent Yunnan Baiyao. This improvement was primarily attributed to proper blood affinity, increased porosity, enhanced adhesion of platelets and erythrocytes, as well as the accelerated activation of coagulation factors and platelets. Under the synergistic effect of Pal and DC, the nanocomposite film displayed suitable tensile strength (20.58 MPa) and elongation at break (47.29 %), which may be due to the strong intermolecular hydrogen bonding and electrostatic interaction between Pal/DC and macropolymers. Notably, the nanocomposite film exhibited remarkable antibacterial effectiveness and desirable cytocompatibility, as well as the capability of promoting wound healing in vitro. Taken together, the nanocomposite film synergized with Pal and DC is expected to be an efficacious and suitable wound dressing.

Natural and Synthetic Clay Minerals in the Pharmaceutical and Biomedical Fields

Clay minerals are historically among the most used materials with a wide variety of applications. In pharmaceutical and biomedical fields, their healing properties have always been known and used in pelotherapy and therefore attractive for their potential. In recent decades, the research has therefore focused on the systematic investigation of these properties. This review aims to describe the most relevant and recent uses of clays in the pharmaceutical and biomedical field, especially for drug delivery and tissue engineering purposes. Clay minerals, which are biocompatible and non-toxic materials, can act as carriers for active ingredients while controlling their release and increasing their bioavailability. Moreover, the combination of clays and polymers is useful as it can improve the mechanical and thermal properties of polymers, as well as induce cell adhesion and proliferation. Different types of clays, both of natural (such as montmorillonite and halloysite) and synthetic origin (layered double hydroxides and zeolites), were considered in order to compare them and to assess their advantages and different uses.

Incorporation of mixed-dimensional palygorskite clay into chitosan/polyvinylpyrrolidone nanocomposite films for enhancing hemostatic activity

Clay mineral-based hemostatic materials have attracted much attention in recent years, but it is scarce to report the hemostatic nanocomposite films containing natural mixed-dimensional clay composed of natural one-dimensional and two-dimensional clay minerals. In this study, the high-performance hemostatic nanocomposite films were facilely prepared by incorporating the natural mixed-dimensional palygorskite clay leached by oxalic acid (O-MDPal) into chitosan/polyvinylpyrrolidone (CS/PVP) matrix. By contrast, the obtained nanocomposite films exhibited the higher tensile strength (27.92 MPa), lower water contact angel (75.40°), better degradation, thermal stability and biocompatibility after incorporation of 20 wt% of O-MDPal, suggesting that O-MDPal contributed to enhancing the mechanical performance and water holding capacity of the CS/PVP nanocomposite films. Compared with the medical gauze and CS/PVP matrix groups, the nanocomposite films also indicated excellent hemostatic performance evaluated by blood loss and hemostasis time indexes based on the mouse tail amputation model, which might be ascribed to the enriched hemostatic functional sites, and hydrophilic surface, robust physical barrier role of nanocomposite films. Therefore, the nanocomposite film exhibited a promising practical application in wound healing.

Incorporation of silver nanoparticles/curcumin/clay minerals into chitosan film for enhancing mechanical properties, antioxidant and antibacterial activity

It is popular that natural organics are served as green reducing and end-capping reagent for synthesis of functional nanoparticles. In this study, curcumin, a natural pigment, was employed to prepare silver nanoparticles (AgNPs) as a coloring, reducing and end-capping agent by an eco-friendly, economic and facile approach in the presence of different clay minerals, including palygorskite, montmorillonite and mixed-dimensional palygorskite clay. It was found that the phenolic hydroxyl groups or carbonyl groups of curcumin played a crucial role to reduce silver ions into AgNPs with the ginger color. Meanwhile, incorporation of clay minerals could induce the in-situ heterogeneous nucleation of AgNPs on the surface or/and interlayer of the involved clay minerals. It effectively prevented from the aggregations and resulted in uniform dispersion of AgNPs with a diameter of 30-40 nm. Furthermore, the as-prepared nanocomposites exhibited a higher antioxidant (>90%) and antibacterial activity. Due to the synergistic effect of each component among the nanocompositions, the nanocomposites derived from different clay minerals were employed as multifunctional nanofillers to design functional chitosan composite films. By contrast, the chitosan composite films containing curcumin-capped AgNPs/mixed-dimensional palygorskite clay nanocomposites exhibited the best mechanical properties, antioxidant and antibacterial activities. Compared with the chitosan films, the tensile strength and elongation at break of composite films increased by 15.90 MPa and 27.27%, respectively. The inactivation rate of the composite films against Escherichia coli and Staphylococcus aureus had reached 100%. Therefore, the obtained composite film with the ginger color exhibited excellent mechanical, water resistance, antioxidant and antibacterial properties, and it was expected to develop a great potential functional packaging materials.

A study on the uptake of methylene blue by biodegradable and eco-friendly carboxylated starch grafted polyvinyl pyrrolidone

This study is based on the removal of methylene blue (MB) from aqueous solution by cost effective and biodegradable adsorbent carboxymethyl starch grafted polyvinyl pyrolidone (Car-St-g-PVP). The Car-St-g-PVP was synthesized by grafting vinyl pyrolidone onto carboxymethyl starch by free radical polymerization reaction. The structure and different properties of Car-St-g-PVP were determined by ¹H NMR, FT-IR, XRD, TGA and SEM. A series of batch experiments were conducted for the removal of MB, The adsorption affecting factors such as temperature, contact time, initial concentration of MB dye, dose of Car-St-g-PVP and pH were studied in detail. The other parameters like the thermodynamic study, kinetics and isothermal models were fitted to the experimental data. The results showed that pseudo 2^nd order kinetics and Langmuir's adsorption isotherms were best fitted to experimental data with regression coefficient R² viz. 0.99 and 0.97. The kinetic study showed that the adsorption mechanism favored chemisorption. The Gibbs free energy (ΔG°) for the adsorption process was found to be -7.31 kJ/mol, -8.23 kJ/mol, -9.00 kJ/mol and -10.10 kJ/mol at 25 °C, 35 °C, 45 °C and 55 °C respectively. The negative values of ΔG° suggested the spontaneous nature of the adsorption process. Similarly, the positive values of entropy (ΔS°) and enthalpy (ΔH°) 91.27 J/k.mol and 19.90 kJ/mol showed the increasing randomness and endothermic nature of the adsorption process. The value of separation factor (R_L) was found to be less than one (RL < 1), which supported the feasibility of the adsorption process. The maximum MB removal percentage (% R) was found to be 98.6%. So, these findings show that Car-St-g-PVP can be meritoriously used for the treatment of MB from wastewater.

Fibrous Clays in Dermopharmaceutical and Cosmetic Applications: Traditional and Emerging Perspectives

Functionalization of natural clay minerals for high value-added pharmaceutical and cosmetic applications receives significant research attention worldwide attributable to a rising demand and ongoing search for green, efficient, economically sustainable and ecofriendly geomaterials. Fibrous clays, i.e. palygorskite and sepiolite, are naturally-occurring hydrated magnesium aluminum silicate clay minerals with 2:1 layer-chain microstructure and one-dimensional nanofibrous morphology. Due to their unique structural, textural and compatibility features, over the past decade, fibrous clays and their organic modified derivatives are increasingly used in the dermopharmaceutical and cosmetic fields as excipients, active agents or nanocarriers to develop novel skin delivery systems or to modify drug release profile for enhanced health effects. This comprehensive review presents the up-to-date information on fibrous clays used in topically-applied products for therapeutic and cosmetic purposes with the focus on their performance-related structural characteristics and the underlying mechanisms. The recent advancement of fibrous clay-based skin delivery systems was summarized in wide range of applications including pelotherapy, wound healing, antimicrobial action, coloration and UV protection. An overview of the commonly used topically-applied dosage forms (powders, hydrogels, films, peloids and Pickering emulsion) as well as the toxicological aspects was also included, which might provide guidance to the design and development of fibrous clay-based skin delivery systems.

Structural Evolution of Palygorskite as the Nanocarrier of Silver Nanoparticles for Improving Antibacterial Activity

The carrier performance of palygorskite (Pal) can be significantly affected by its structure, morphology, and activity, which was regulated by controlling the dissolution degree of the metal-oxygen octahedron of raw Pal (RPal) under the action of oxalic acid (OA) in this study. The RPal and OA-leached RPal (OPal) then served as supports for immobilizing silver nanoparticles (AgNPs) to form RPal/AgNPs and OPal/AgNPs antibacterial nanocomposites. The structural and morphological characterizations were used to confirm the dispersion uniformity of AgNPs on the RPal and OPal nanorods, and antibacterial experiments were conducted to evaluate the performance of as-prepared composites and also investigate their antibacterial mechanism. The results showed that OPal-48h (OA leaching for 48 h) loaded with AgNPs (OPal-48h/AgNPs) possesses the most excellent and broad-spectrum antibacterial properties, where its minimum inhibitory concentration values against E. coli, S. aureus, ESBL-E. coli, and MRSA reached 0.25, 0.125, 0.25, and 0.5 mg/mL, respectively, which are mainly attributed to the optimal balance between surface activity and structural stability of OPal-48h that maximally increased its dispersibility and active sites, therefore contributing to the in situ formation of monodisperse AgNPs on the nanorods of OPal-48h.

Synergistic Effect of Glycyrrhizic Acid and ZnO/Palygorskite on Improving Chitosan-Based Films and Their Potential Application in Wound Healing

The synergistic effect of chitosan (CS), glycyrrhizic acid (GA) and ZnO/palygorskite (ZnO/PAL) as potential wound dressing was evaluated in the form of films by the solution casting method. The nanocomposite films were well-characterized with ATR-FTIR, XRD and SEM to explore the interactions between CS, GA and ZnO/PAL. Physical, mechanical and antibacterial properties of the nanocomposite films were systematically investigated for their reliability in end-up utilization. Importantly, it was found that the presence of PAL in the films provided enhanced mechanical properties, whereas CS, GA and ZnO supplied a broad-spectrum antibacterial activity, especially for drug-resistant bacteria such as ESBL-E. coli and MRSA. Overall, this research demonstrated that the prepared films can be a promising candidate for wound-care materials.

Fast and Highly Efficient Adsorption Removal of Toxic Pb(II) by a Reusable Porous Semi-IPN Hydrogel Based on Alginate and Poly(Vinyl Alcohol)

A porous semi-interpenetrating network (semi-IPN) hydrogel adsorbent with excellent adsorption properties and removal efficiency towards Pb(II) was prepared by a facile grafting polymerization reaction in aqueous medium using natural biopolymer sodium alginate (SA) as the main chains, sodium acrylate (NaA) as the monomers, and poly(vinyl alcohol) (PVA) as the semi-IPN component. FTIR, TGA and SEM analyses confirm that NaA monomers were grafted onto the macromolecular chains of SA, and PVA chains were interpenetrated and entangled with the crosslinked network. The incorporation of PVA facilitates to form pores on the surface of hydrogel adsorbent. The semi-IPN hydrogel containing 2 wt% of PVA exhibits high adsorption capacity and fast adsorption rate for Pb(II). The best adsorption capacity reaches 784.97 mg/g, and the optimal removal rate reaches 98.39% (adsorbent dosage, 2 g/L). In addition, the incorporation of PVA improved the gel strength of hydrogel, and the storage modulus of hydrogel increased by 19.4% after incorporating 2 wt% of PVA. The increase of gel strength facilitates to improve the reusability of hydrogel. After 5 times of regeneration, the adsorption capacity of SA-g-PNaA decreased by 23.2%, while the adsorption capacity of semi-IPN hydrogel only decreased by 10.8%. The adsorption kinetics of the hydrogel in the initial stage (the moment when the adsorbent contacts solution) and the second stage are fitted by segmentation. It is intriguing that the adsorption kinetics fits well with both pseudo-second-order kinetic model and pseudo-first-order model before 60 s, while only fits well with pseudo-second-order adsorption model in the whole adsorption process. The chemical complexing adsorption mainly contribute to the efficient capturing of Pb(II).