Cross-linked chitosan into graphene oxide-iron(III) oxide hydroxide as nano-biosorbent for Pd(II) and Cd(II) removal

A short review on polysaccharide-based nanocomposite adsorbents for separation and biomedical applications

Polysaccharides such as chitosan, alginate, cellulose, and carrageenan have emerged as promising adsorbents due to their biodegradability, abundant availability, and diverse chemical functionality. These biopolymers exhibit promising performance for adsorption of a wide range of pollutants including heavy metals (e.g., lead, cadmium), organic dyes (e.g., methylene blue, methyl orange), and even pathogenic microorganisms. However, inherent hydrophilicity and poor mechanical properties limit their broader application in environmental and biomedical fields. As an effective way to address the issues, recent advancements have focused on the incorporation of nanoparticles (e.g., metal oxides, carbon nanotubes and clays) into polysaccharides to obtain nanocomposite films. Generally, these nanocomposites offer enhanced surface area, tunable porous network, and improved chemical and mechanical resistances for adsorption and biomedical applications. The current review gives a focused overview of the recent progresses in polysaccharide-based nanocomposites, with particular attention to their fabrication methods, adsorption capacity and mechanism, and diverse applications in water purification, drug delivery, and antimicrobial treatments. Critical challenges such as the optimization of nanoparticle dispersion and the environmental impacts of nanocomposite biodegradation are also discussed to pave the road for the future research in this promising field.

Preparation of chitosan resin by two-step crosslinking method and its adsorption for palladium in wastewater

To preserve the activity of amine groups on chitosan, chitosan resin (CR) was synthesized using the reversed-phase suspension two-step crosslinking method for the adsorption of palladium from wastewater. The effects of varying the amounts of chitosan, liquid paraffin, ethyl acetate, formaldehyde solution, and epichlorohydrin on the adsorption capacity of CR were investigated using both single-factor experiments and response surface methodology. The preparation conditions for the chitosan resin were optimized, and its adsorption properties were systematically evaluated. The results indicated that CR exhibited a high saturated adsorption capacity for palladium, reaching 195.22 mg·g-1. The adsorption kinetics followed the pseudo-second-order model, while the adsorption isotherms were well described by the Sips model. Thermodynamic analysis demonstrated that the adsorption process was spontaneous and endothermic. Furthermore, CR maintained exceptional stability, with a palladium removal efficiency exceeding 99.8 % even after eight adsorption-desorption cycles. The primary adsorption mechanism is attributed to the interaction between palladium ions and the protonated amino groups of the chitosan resin.

Preparation and characterization of CS/PAT/ MWCNT@MgAl-LDHs nanocomposite for Cd2+ removal and 4-nitrophenol reduction

The present study evaluated the performance of multiwalled carbon nanotube (MWCNT)@MgAl-layered double hydroxide (LDH) nanoparticles loaded on poly-2 aminothiazole (PAT)/chitosan (CS) matrix (CPML) to remove Cd2+ ions from aqueous solution. The removal efficiency of modified CS/PAT with MWCNT@MgAl-LDHs was increased significantly compared to pure CS/PAT. The influence of heavy metal ion concentration, pH, temperature, adsorbent dosage, and contact time on the adsorption was examined. The optimum conditions for the adsorption of Cd2+ ions were 25 0C with the adsorbent dosage of 0.06 g and initial concentration for adsorption of the Cd2+ 100 mg/L at pH = 8. The maximum adsorption capacity was measured to be 1106.19 mg/g. The values of thermodynamic parameters namely Gibbs free energy (ΔG°), entropy change (ΔS°), and enthalpy change (ΔH°) indicated the feasibility, spontaneity and the endothermic nature of the adsorption process, respectively. The pseudo-second-order kinetics and the Langmuir model were selected as the best models for the adsorption process. Also, CPML nanocomposite (NC) was successfully tested for p-nitrophenol (p-NP) reduction in the presence of NaBH4. The reaction was nearly completed in 6 min. The fabricated CPML-NC could be reused for three consecutive cycles.

Effective fabrication and characterization of eco-friendly nano particles composite for adsorption Cd (II) and Cu (II) ions from aqueous solutions using modelling studies

The public health and environment are currently facing significant risks due to the discharge of industrial wastewater, which contains harmful heavy metals and other contaminants. Therefore, there is a pressing need for sustainable and innovative technologies to treat wastewater. The main objective of this research was to develop novel composites known as chitosan, Padina pavonica, Fe(III), and nano MgO incorporated onto pomegranate peel with the specific purpose of removing Cd (II) and Cu (II) ions from aqueous solutions. The characterization of these nanocomposites involved the utilization of several analytical methods, including Fourier-transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, thermal gravimetric analysis, and X-ray photoelectron spectroscopy. The efficiency of these nanocomposites was evaluated through batch mode experiments, investigating the impact of factors such as pH, initial concentration, contact time, and adsorbent dose on the adsorption of Cu(II) ions. The optimum conditions for the removal of ions were pH = 5 for Cu (II) and 6 for Cd (II), contact time: 120 min, adsorbent dosage: 0.2 g, initial metal ion concentration: 50 mg/L for each metal ion for the present study. The MgO@Pp demonstrated the highest removal efficiencies for Cu(II) and Cd(II) at 98.2% and 96.4%, respectively. In contrast, the CS@Fe-PA achieved removal efficiencies of 97.2% for Cu(II) and 89.2% for Cd(II). The modified MgO@Pp exhibited significantly higher total adsorption capacities for Cu(II) and Cd(II) at 333.3 and 200 mg/g, respectively, compared to CS@Fe-PA, which had capacities of 250 and 142 mg/g, respectively. The adsorption of Cd (II) and Cu (II) ions by MgO@Pp was found to be a spontaneous process. The R2 values obtained using the Freundlich and Redlich-Peterson models were the highest for the MgO@Pp composite, with values of 0.99, 0.988, 0.987, and 0.994, respectively, for Cu (II) and Cd (II). The pseudo-second-order equation was determined to be the best-fit kinetic model for this process. Reusability experiments confirmed that the adsorbents can be utilized for up to four regeneration cycles. Based on the findings of this study, MgO @ Pp is the most promising alternative and could be instrumental in developing strategies to address existing environmental pollution through adsorption.

Synergistic potential in spinel ferrite MFe2O4 (M = Co, Ni) nanoparticles-mediated graphene oxide: Structural aspects, photocatalytic, and kinetic studies

The existence of artificial dyes in water is a significant environmental concern, as it can lead to poor water quality. Photodegradation is becoming an increasingly popular method for treating water contaminated with dyes. In this study, the photodegradation of Reactive Red 66 and Reactive Red 120 dyes, as well as textile wastewater, was investigated under UV and visible light irradiation. To enhance the photoresponse of the MFe2O4 (M = Co, Ni) nanoparticles, modifications were made by incorporating graphene oxide. The MFe2O4 nanoparticles and MFe2O4/GO nanocomposite photocatalysts were subjected to several characterization techniques, including FT-IR, Raman spectroscopy, XRD, DRS, zeta potential, VSM, TGA, DSC, BET, SEM, and EDAX analysis. Experiments were conducted to optimize several key parameters involved in the photodegradation process, including pH, photocatalyst dosage, initial dye concentration, and irradiation time. The removal efficiency of Reactive Red 66 and Reactive Red 120 dyes using CoFe2O4 nanoparticles was found to be 86.97 and 82.63%, respectively. Also, the removal percentage of these dyes using CoFe2O4/GO nanocomposite photocatalyst was 95.57 and 90.9% for Reactive Red 66 and Reactive Red 120, respectively. Experiments found that NiFe2O4 nanoparticles removed 90.92% of Reactive Red 66 dye and 84.7% of Reactive Red 120 dye. The NiFe2O4/GO nanocomposite photocatalyst showed even higher removal efficiencies, degrading 97.96% of Reactive Red 66 and 93.44% of Reactive Red 120. After three days of exposure to visible light irradiation, the removal percentage of Reactive Red 66 using MFe2O4 and MFe2O4/GO nanocomposite was investigated.

Efficient treatment of palladium from wastewater by acrolein cross-linked chitosan hydrogels: Adsorption, kinetics, and mechanisms

Herein we present a study on the preparation and properties of a hydrogel adsorbent for treatment of wasted palladium souring from actial petrochemical industrial wastewater. Chitosan was used as the raw material and acrolein as the cross-linking agent for the hydrogel (A/CS). The adsorption behaviors of the hydrogel for Pd(II) ions were characterized and analyzed. The effect of pH, temperature, adsorption kinetics, and thermodynamics were investigated. Langmuir models were employed to describe the adsorption isotherms, while the pseudo-second-order equation was applied to describe the adsorption kinetics. The experimental results demonstrated that the adsorption was a monolayer chemical adsorption, and the adsorption capacity was found to reach 505.05 mg/g under optimal conditions. In addition, FT-IR and XPS analyses, combined with MS calculations confirmed that chelation and electrostatic attraction were dominated in the adsorption process. Overall, the development of this hydrogel adsorbent will provide a practical approach to the treatment of industrial wastewater containing palladium and have great potential for practical applications.

Green Synthesis of Polylactic acid/Fe3O4@β-Cyclodextrin Nanofibrous Nanocomposite Loaded with Ferulago Angulata Extract as a Novel Nano-biosorbent: Evaluation of Diazinon Removal and Antibacterial Activity

Background

Organophosphate pesticides are one of the most extensively applied insecticides in agriculture. These insecticides persist in the environs and thereby cause severe pollution problems. Iron oxide polymer nanocomposites are wastewater remediation agents synthesized by various methods. When compared to chemical processes, green synthesis using plant extract is thought to be more cost- and environmentally-friendly.

Objectives

This study aimed to evaluate the green synthesis of Fe3O4@β-Cyclodextrin (Fe3O4@β-CD) nanoparticles using Ferulago angulata (F. angulata) methanol extract. These nanoparticles are loaded on polylactic acid (PLA) nanofibrous nanocomposite along with Ferulago angulata extract (2, 4, and, 6wt %) to produce PLA/Fe3O4@β-CD/F. angulata extract nanofibrous nanocomposite as a new nano biosorbent. Furthermore, the antibacterial properties of this compound and its activity in diazinon removal have been evaluated.

Materials and Methods

Fe3O4@β-CD nanoparticles synthesis was performed via co-precipitation method using FeCl3.6H2O and FeCl2.4H2O and β-cyclodextrin, and Ferulago angulata extract. Then polylactic acid/ Fe3O4@β-CD / F. angulate.extract nanofibrous nanocomposite was prepared by the electrospinning method. Energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction analysis (XRD), vibrating sample magnetometer (VSM), and Fourier transform infrared spectroscopy (FTIR) were used to analyze the structure of the nanocomposite. The antibacterial activity of this nanocomposite against several fish and human bacterial pathogens, as well as its effectiveness in diazinon elimination, have been evaluated in the sections that follow.

Results

The nanocomposite structure demonstrated that Fe3O4 nanoparticles were produced and put into the polylactic acid matrix with an average particle size of 40 nm. Furthermore, the results showed that this nanocomposite exhibited removal efficiency of diazinon over 80% after 120 minutes under pH=7 and 2.5 gr.L-1 nanocomposite concentration. Also, this structure showed above 70% antibacterial ability against Bacillus cereus, Staphylococcus epidermidis and 60% antibacterial ability against Streptococcus iniae and Yersinia ruckeri.

Conclusion

Fe3O4 nanocomposite synthesis may be accomplished in a delicate and efficient manner by using Ferulago angulata to produce Fe3O4@-CD nanoparticles. The stability of the nanoparticles was enhanced by combining Ferulago angulata extract with polylactic acid nanofibers to create an antibacterial homocomposition nanocomposite. This device may be used to remove and disinfect diazinon from aqueous media in an environmentally friendly manner.

Chitosan derived efficient and stable Pd nano-catalyst for high efficiency hydrogenation

The design and development of green and efficient supported catalysts is the frontier direction in the field of green synthesis, which conforms to the strategic concept of green sustainable chemistry and "carbon neutrality". Herein, we used a renewable resource chitosan (CS) derived from seafood wastes of chitin as carriers to design two different chitosan-supported palladium (Pd) nano-catalysts through different activation methods. The Pd particles were firmly and uniformly dispersed on the chitosan microspheres due to the interconnected nanoporous structure and functional groups of chitosan, proved by diverse characterizations. The chitosan supported catalysts (Pd@CS) was applied to hydrogenation of 4-nitrophenol, which showed competitive catalytic activity compared to commercial Pd/C, un-supported nano-Pd and Pd(OAc)₂ catalysts, as well as excellent catalytic activity, good reusability, long-life and broad applicability in selective hydrogenation of aromatic aldehydes, suggesting potential of applications in green industrial catalysis.

Adsorption mechanism and removal efficiency of magnetic graphene oxide-chitosan hybrid on aqueous Zn(II)

Magnetic architecture incorporating graphene-chitosan has demonstrated encouraging application in wastewater purification. Herein, a ternary hybrid based on Fe₃O₄-graphene oxide-chitosan (MGOCS) was fabricated and employed as adsorbent to remove aqueous Zn(II). The adsorption mechanism was intensively inspected based on the hard and soft acid base (HSAB) theory. Results present, MGOCS removes 96.73 % of Zn(II) in 38 min, with adsorption quantity 386.92 mg·g^-1. Electron transfer and energy lowering determined by the HSAB theory illuminate the plausible adsorption sites in each component of MGOCS: O₂^- in Fe₃O₄, -C(=O)NH-, -NH₂ in chitosan and -OH in graphene oxide. The exploration was upheld by spectroscopic analyses. Thereby, following adsorption mechanism was proposed. (1) ZnO bond was formed featured by electron donation. (2) The -C(=O)NH- group formed via amidation between graphene oxide and chitosan contributes to Zn(Π) uptake. This work may inspire the development of efficient adsorbent based on magnetic graphene-chitosan for wastewater remediation.

Promotion effect of graphene on phytoremediation of Cd-contaminated soil

Echinacea purpurea (L.) Moench was selected as a remediation plant in this study, and different concentrations of graphene oxide (GO) were added to Cd-contaminated soil. Through pot experiments, the effect of E. purpurea on Cd-contaminated soil was determined at 60 days, 120 days, and 150 days. A preliminary study on the remediation mechanism of GO was explored through changes in the forms of Cd in the rhizosphere soil, soil pH, and soil functional groups. Results showed that the optimal concentration of GO was 0.4 g/kg, and under the condition, the accumulation of Cd in the roots of E. purpurea was as high as 113.69 ± 23.86 mg/kg, and the maximum EF reached 5.87 ± 1.34. Compared with those of the control group, accumulated Cd concentration and EF in the roots increased by 60.34% and 2.32, respectively. Correlation analysis showed that the absorption and accumulation of Cd was negatively correlated with the exchangeable Cd content at 120 days, and the exchangeable Cd was negatively correlated with the relative content of functional groups in the soil with 0.4 g/kg GO (E2). The artificial application of GO to the soil can be used as an effective way to improve the effect of E. purpurea in the remediation of Cd soil pollution, and it has great application potential in the stabilization of plants and vegetations and restoration of high-concentration Cd-contaminated soil.

Preparation, characterization and immune activity of Codonopsis pilosula polysaccharide loaded in chitosan-graphene oxide

The purpose of this study was to investigate the effects of chitosan graphene oxide Codonopsis pilosula polysaccharide (CS-GO-CPP) complex on the immune function of macrophage cells (RAW264.7). In this experiment, chitosan (CS) was combined with graphene oxide (GO) by electrostatic action to prepare CS-GO nanocomposites, and it was used as a carrier to load Codonopsis pilosula polysaccharide (CPP) onto CS-GO to prepare CS-GO-CPP. Using infrared spectroscopy detection, zeta potential detection, and thermogravimetric analysis, we conduct a preliminary analysis of the structure of CS-GO-CPP. Macrophages were employed to evaluate CS-GO-CPP immunomodulatory activity and the possible mechanism responsible for the activation of macrophages in vitro. The results showed that compared with CPP, CS-GO-CPP did not change the basic structure of polysaccharide, and its thermal stability was improved. 0.78- 12.5 μg·mL^-1 of CS-GO-CPP could significantly promote the phagocytic activity of RAW264.7 cells (P < 0.05) and significantly increase NO content, IL-4 and IFN-γ secretion, the expression of CD40, CD86, and F4/80 (P < 0.05). CS-GO-CPP might activate the NF-κB signaling pathway and induce the nuclear translocation of NF-κB p65. In conclusion, CS-GO-CPP has a capacity to activate RAW264.7 cells for an improvement of immunomodulation activities, which might be through NF-κB signaling pathway.

Removal of Cr(VI) from Wastewater Using Graphene Oxide Chitosan Microspheres Modified with α-FeO(OH)

Graphene oxide and chitosan microspheres modified with α−FeO(OH) (α−FeO(OH)/GOCS) are prepared and utilized to investigate the performance and mechanism for Cr(VI) removal from aqueous solutions and the possibility of Fe secondary pollution. Batch experiments were carried out to identify the effects of pH, mass, and volume ratio (m/v), coexisting ions, time (t), temperature (T), and Cr(VI) initial concentration (C0) on Cr(VI) removal, and to evaluate adsorption kinetics, equilibrium isotherm, and thermodynamics, as well as the possibility of Fe secondary pollution. The results showed that Cr(VI) adsorption increased with C0, t, and T but decreased with increasing pH and m/v. Coexisting ions inhibited Cr(VI) adsorption, and this inhibition increased with increasing concentration. The influence degrees of anions and cations on the Cr(VI) adsorption in descending order were SO42− > PO42− > NO3− > Cl− and Ca2+ > Mg2+ > Mn2+, respectively. The equilibrium adsorption capacity of Cr(VI) was the highest at 24.16 mg/g, and the removal rate was 97.69% under pH = 3, m/v = 1.0 g/L, T = 298.15 K, and C0 = 25 mg/L. Cr(VI) adsorption was well fitted to a pseudo-second-order kinetic model and was spontaneous and endothermic. The best fit of Cr(VI) adsorption with the Langmuir and Sips models indicated that it was a monolayer and heterogeneous adsorption. The fitted maximum adsorption capacity was 63.19 mg/g using the Sips model under 308.15 K. Cr(VI) removal mainly included electrostatic attraction between Cr(VI) oxyanions with surface Fe−OH2+, and the adsorbed Cr(VI) was partially reduced to Cr(III) and then precipitated on the surface. In addition, there was no Fe secondary pollution during Cr(VI) adsorption.

Research progress in the removal of heavy metals by modified chitosan

Chitosan and its modifiers have been widely studied for their good biocompatibility and excellent adsorption properties for heavy metal ions. The synthesis and application of modified chitosan, the effects of process variables (such as pH, amount of adsorbent, temperature, contact time, etc.), adsorption kinetics, thermodynamics and the adsorption mechanism on the removal of heavy metal ions are reviewed. The purpose is to provide the latest information about chitosan as adsorbent and to promote the synthesis of modified chitosan and its application in the removal of heavy metals.

Graphene-based nanomaterials in the electroplating industry: A suitable choice for heavy metal removal from wastewater

The presence of various heavy metal ions in the industrial waste waters has recently been a challenging issue for human health. Since heavy metals are highly soluble in the aquatic environments and they can be absorbed easily by living organisms, their removal is essential from the environmental point of view. Many studies have been devoted to investigating the environmental behaviour of graphene-based nanomaterials as sorbent agents to remove metals from wastewaters arising by galvanic industries. Among the graphene derivates, especially graphene oxide (GO), due to its abundant oxygen functional groups, high specific area and hydrophilicity, is a high-efficient adsorbent for the removal of heavy and precious metals in aquatic environment. This paper reviews the main graphene, GO, functionalized GO and their composites and its applications in the metals removal process. The influencing factors, adsorption capacities and reuse capability are highlighted for the most extensively used heavy metals, including copper, zinc, nickel, chromium, cobalt and precious metals (i.e., gold, silver, platinum, palladium, rhodium, and ruthenium) in the electroplating process.