Insight into chitosan/mesoporous silica nanocomposites as eco-friendly adsorbent for enhanced retention of U (VI) and Sr (II) from aqueous solutions and real water

Adsorption efficiency of chitosan/clinoptilolite (CS/CZ) composite for effective removal of Cd+2 and Cr+6 ions from wastewater effluents of dairy cattle farms

The wastewater effluent is responsible for the major ecological impact of the dairy sectors. To avoid the negative consequences of heavy metal pollution on the ecosystem, creative, affordable, and efficient treatment methods are now required before the effluent flows into the surrounding area. This study was aimed at assessing the effectiveness of three different adsorbents for Cd+2 and Cr+6 ions from wastewater effluents of dairy farms, including chitosan (CS), clinoptilolite zeolite (CZ), and chitosan/clinoptilolite zeolite (CS/CZ) composite. The adsorption kinetics of the CS/CZ composite were established using the effects of the key variables (pH, agitation speed, adsorbent concentrations, and contact durations). The removal (%) and adsorption capacities, qe (mg/g), were calculated using the data from the adsorption kinetics. Wastewater samples (n = 60) were collected from the wastewater effluents of five farms. Cd+2 and Cr+6 ion concentrations in all collected samples were determined. Following the CS/CZ composite creation, it was characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (X-RD), and Fourier-transform infrared spectrum (FT-IR). The CS/CZ composite had an adsorption capacity of 92.4 and 96.5 mg/g for both Cd+2 and Cr+6 ions at a concentration of 2.0 g/100 ml, respectively, while the CZ adsorption capacities for the two ions were 87.5 mg/g and 61.0 mg/g, respectively, at 4.0 g/100 ml concentration. The CS was achieved at 55.56 mg/g and 33.3 mg/g, respectively, at the same concentration. The efficiency of heavy metal removal was enhanced by increasing adsorbent concentration, agitation speed, and contact duration. Using CS/CZ composite at 2.0 g/100 ml concentration, 180 min of contact time, and 300 rpm agitation speed, the greatest removal efficiencies for Cd+2 and Cr+6 ions (96.43 and 98.75%, respectively) were demonstrated.

Amidoxime-grafted cotton fibers with anti-microbial sludge for efficient uranium recovery

Uranium as a nuclear fuel, its source and aftertreatment has been a hot topic of debate for developers. In this paper, amidoxime and guanidino-modified cotton fibers (DC-AO-PHMG) were synthesized by the two-step functionalization approach, which exhibited remarkable antimicrobial and high uranium recovery property. Adsorption tests revealed that DC-AO-PHMG had excellent selectivity and anti-interference properties, the maximum adsorption capacity of 609.75 mg/g. More than 85 % adsorption capacity could still be kept after 10 adsorption-desorption cycles, and it conformed to the pseudo-second-order kinetic model and the Langmuir adsorption isotherm model as a spontaneous heat-absorbing chemical monolayer process. FT-IR, EDS and XPS analyses speculated that the amidoxime and amino synergistically increased the uranium uptake. The inhibitory activities of DC-AO-PHMG against three aquatic bacteria, BEY, BEL (from Yellow River water and lake bottom silt, respectively) and B. subtilis were significantly stronger, and the uranium adsorption was not impacted by the high bacteria content. Most importantly, DC-AO-PHMG removed up to 94 % of uranium in simulated seawater and extracted up to 4.65 mg/g of uranium from Salt Lake water, which demonstrated its great potential in the field of uranium resource recovery.

Advances in Nano-Functional Materials in Targeted Thrombolytic Drug Delivery

Thrombotic disease has been listed as the third most fatal vascular disease in the world. After decades of development, clinical thrombolytic drugs still cannot avoid the occurrence of adverse reactions such as bleeding. A number of studies have shown that the application of various nano-functional materials in thrombus-targeted drug delivery, combined with external stimuli, such as magnetic, near-infrared light, ultrasound, etc., enrich the drugs in the thrombus site and use the properties of nano-functional materials for collaborative thrombolysis, which can effectively reduce adverse reactions such as bleeding and improve thrombolysis efficiency. In this paper, the research progress of organic nanomaterials, inorganic nanomaterials, and biomimetic nanomaterials for drug delivery is briefly reviewed.

A comprehensive study for the potential removal of 152+154Eu radionuclides using a promising modified strontium-based MOF

A facile modification of a strontium-based MOF using oxalic acid was carried out to prepare MTSr-OX MOF, which was used as a potential substance for eliminating 152+154Eu radioisotopes. Various analytical techniques were used to characterize MTSr-OX-MOF. The prepared MOF had a rod-like structure with a BET surface area of 101.55 m2 g-1. Batch sorption experiments were used to investigate the sorption performance of MTSr-OX-MOF towards 152+154Eu radionuclides where different parameters like pH, contact time, initial 152+154Eu concentration, ionic strength, and temperature were scrutinized to determine the optimum conditions for 152+154Eu removal. MTSr-OX-MOF showed superior effectiveness in the elimination of 152+154Eu with a maximum sorption capacity of 234.72 mg g-1 at pH 3.5. Kinetics fitted with the pseudo-second-order model and the Langmuir model correctly described the sorption mechanism. The thermodynamic variables were carefully examined, demonstrating that the 152+154Eu sorption was endothermic as well as spontaneous. The MTSr-OX-MOF has been found to be a significantly more effective sorbent towards 152+154Eu than that of many other adsorbents. When applied to real active waste, MTSr-OX-MOF demonstrated excellent removal performance for a wide range of radionuclides. As a result, the MTSr-OX-MOF can be recognized as an attractive solution for the 152+154Eu purification from active waste.

Hybrid Polymer-Silica Nanostructured Materials for Environmental Remediation

Due to the ever-growing global population, it is necessary to develop highly effective processes that minimize the impact of human activities and consumption on the environment. The levels of organic and inorganic contaminants have rapidly increased in recent years, posing a threat to ecosystems. Removing these toxic pollutants from the environment is a challenging task that requires physical, chemical, and biological methods. An effective solution involves the use of novel engineered materials, such as silica-based nanostructured materials, which exhibit a high removal capacity for various pollutants. The starting materials are also thermally and mechanically stable, allowing for easy design and development at the nanoscale through versatile functionalization procedures, enabling their effective use in pollutant capture. However, improvements concerning mechanical properties or applicability for repeated cycles may be required to refine their structural features. This review focuses on hybrid/composite polymer-silica nanostructured materials. The state of the art in nanomaterial synthesis, different techniques of functionalization, and polymer grafting are described. Furthermore, it explores the application of polymer-modified nanostructured materials for the capture of heavy metals, dyes, hydrocarbons and petroleum derivatives, drugs, and other organic compounds. The paper concludes by offering recommendations for future research aimed at advancing the application of polymer-silica nanostructured materials in the efficiency of pollutant uptake.

Efficient and selective capture of uranium by polyethyleneimine-modified chitosan composite microspheres from radioactive nuclear waste

Uranium extraction from radioactive nuclear waste is vital for sustainable energy supply and ecological security. Herein, a polyethyleneimine-chitosan composite microspheres n-PEI/ECH-CTS (n = 0.1, 0.2, 0.3, 0.4, 0.5) were synthetized for efficient and selective uranium adsorption. The prepared chitosan microspheres with uniform size, uniform dispersion and good mechanical strength combine cost-effectiveness and environmental benefits. The 0.4-PEI/ECH-CTS exhibits the highest adsorption capacity of 380.65 mg g^-1 within only 4 h due to high nitrogen content of 6.57 mol kg^-1. The DFT calculations confirms that the optimal coordination mode of UO₂²⁺ and 0.4-PEI/ECH-CTS is one UO₂²⁺ chelated with two -NH₂ from two adsorption units, respectively. Adsorption efficiency of U(VI) from simulated nuclear wastewater achieves to 100%, and the K_d value is up to 1.1 × 10⁴ mL g^-1, which is 1.7 × 10⁴-6.1 × 10⁴ times that of coexisting ions. The C_U(VI) reduces in simulated wastewater from 10.98 mg L^-1 to 1 μg L^-1, which is well below the US Environmental Protection Agency uranium limits for drinking water (30 μg L^-1). Besides, 0.4-PEI/ECH-CTS still maintains above 95% adsorption efficiency after seven cycles. In short, the 0.4-PEI/ECH-CTS microspheres integrate high performance, practicality and cost-effectiveness, which has great advantages in practical industrial applications.

Synthesis and Characterization of Green ZnO@polynaniline/Bentonite Tripartite Structure (G.Zn@PN/BE) as Adsorbent for As (V) Ions: Integration, Steric, and Energetic Properties

A green ZnO@polynaniline/bentonite composite (G.Zn@PN/BE) was synthesized as an enhanced adsorbent for As (V) ions. Its adsorption properties were assessed in comparison with the integrated components of bentonite (BE) and polyaniline/bentonite (PN/BE) composites. The G.Zn@PN/BE composite achieved an As (V) retention capacity (213 mg/g) higher than BE (72.7 mg/g) and PN/BE (119.8 mg/g). The enhanced capacity of G.Zn@PN/BE was studied using classic (Langmuir) and advanced equilibrium (monolayer model of one energy) models. Considering the steric properties, the structure of G.Zn@PN/BE demonstrated a higher density of active sites (Nm = 109.8 (20 °C), 108.9 (30 °C), and 67.8 mg/g (40 °C)) than BE and PN/BE. This declared the effect of the integration process in inducing the retention capacity by increasing the quantities of the active sites. The number of adsorbed As (V) ions per site (1.76 up to 2.13) signifies the retention of two or three ions per site by a multi-ionic mechanism. The adsorption energies (from -3.07 to -3.26 kJ/mol) suggested physical retention mechanisms (hydrogen bonding and dipole bonding forces). The adsorption energy, internal energy, and free enthalpy reflected the exothermic, feasible, and spontaneous nature of the retention process. The structure is of significant As (V) uptake capacity in the existence of competitive anions or metal ions.

Tailored metal-organic frameworks facilitate the simultaneously high-efficient sorption of UO22+ and ReO4- in water

The simultaneously efficient extraction of radioactive metal cations and anions from radioactive waste is of great interest for the proper disposal of spent fuel and environmental protection. Modifying metal-organic frameworks (MOFs) into multifunctional materials with controllable and desired properties is an efficient strategy for broadening their practical applications. Herein, poly(ethyleneimine) (PEI) tailored MIL-101(Cr) (MILP) was obtained through an easy operation and low-cost strategy and was utilized to simultaneously extract uranium (UO₂²⁺) and rhenium (ReO₄^-) from water. The effects of PEI coating amounts, system pH, contact time, initial UO₂²⁺/ReO₄^- concentrations, ionic strength, as well as interfering ions were studied to evaluate the sorption performance of MILP composites. The maximum sorption capacity was 416.67 mg/g for UO₂²⁺ at pH 5.5 and 434.78 mg/g for ReO₄^- at pH 3.5, levels that are superior to those of most adsorbents. The sorption of UO₂²⁺/ReO₄^- occurred in a pH-dependent, spontaneous and endothermic manner, which showed preferable modeling by the pseudo-second-order (PSO) kinetic equation and Freundlich isotherm equation. The adsorption of ReO₄^- was inhibited by the coexistence of UO₂²⁺ and high ion strength. Batch experiments and X-ray photoelectron spectroscopy (XPS) results indicate that UO₂²⁺/ReO₄^- sorption was driven by the abundant amino groups and unsaturated metal sites in the MILP-3 composites. MILP-3 also showed excellent recycling performance and maintained high sorption capacities for UO₂²⁺/ReO₄^- in different simulated water samples. This study shows that MILP composites can effectively extract radioactive metal cations and anions from water, and lays a foundation for designing an excellent new category of candidates with versatile functions for wastewater management.

Insight into the role of the zeolitization process in enhancing the adsorption performance of kaolinite/diatomite geopolymer for effective retention of Sr (II) ions; batch and column studies

Diatomite/kaolinite-based geopolymer (GP) was synthesized and incorporated in zeolitization process (Z/GP) to investigate the role of the zeolite phases in inducing its retention capacity of the dissolved Sr (II) ions in water. The retention of Sr (II) ions using Z/GP in comparison with GP was evaluated based on both batch and fixed-bed column studies. In the batch study, the zeolitized geopolymer (Z/GP) shows enhancement in the Sr (II) retention capacity (193.7 mg/g) as compared to the normal geopolymer (102 mg/g). Moreover, the recyclability studies demonstrate higher stability for Z/GP than GP with a retention percentage higher than 90% for five reusing runs. The kinetic and the equilibrium properties of the occurred Sr (II) retention reactions follow the assumption of the Pseudo-Second order model (R² > 0.96) and Langmuir model (R² > 0.97), respectively. The Gaussian energies (15.4 kJ/mol (GP) and 11.47 kJ/mol (Z/GP)) related to retention mechanism of chemical type and within the suggested range for the zeolitic ion exchange processes. The Sr (II) retention reactions by GP and Z/GP are of spontaneous and exothermic properties which qualifies the products to be used at low-temperature conditions (20 °C). The column studies also declared higher performance for the Z/GP fixed bed as compared to the normal GP bed considering the total Sr (II) retention percentage (72.9%), treated volume (8 L), saturation time (1620 min), and a maximum capacity of Z/GP particles in the bed (567.6 mg/g).

Effective decontamination of Ca2+ and Mg2+ hardness from groundwater using innovative muscovite based sodalite in batch and fixed-bed column studies; dynamic and equilibrium studies

A novel form of sodalite was synthesized from muscovite (M.SD) as low-cost softening material for both Ca²⁺ and Mg²⁺ ions from real groundwater in batch and column studies. The sodalite sample showed significant surface area (105 m²/g) and ion exchange capacity (87.3 meq/100 g) which qualifies it strong for softening applications. The incorporation of the M.SD as a fixed bed in column system at a fixed thickness of 4 cm and flow rates of 5 mL/min resulted in removal percentages of 90.5% and 92.2% for Ca²⁺ and Mg²⁺, respectively at pH 7.6. Considering the real concentrations of the ions (Ca²⁺ (233 mg/L) and Mg²⁺ (114 mg/L)), the M.SD bed has the ability to reduce their concentrations according to the recommended limits (75 mg/L for Ca²⁺ and 50 mg/L for Mg²⁺). These conditions resulted in purification of about 8.1 L and 8.7 L with breakthrough intervals of 1380 min and 1440 min; and saturation interval more than 1620 min for Ca²⁺ and Mg²⁺, respectively. The M.SD columns' performances were described considering the assumption of the Thomas model, Adams-Bohart model, and Yoon-Nelson model. The batch studies demonstrate the uptake of both Ca²⁺ and Mg²⁺ ions according to the Pseudo-First order kinetics and Langmuir equilibrium behaviour. Considering the values of Gaussian energies (0.77 KJ/mol (Ca²⁺) and 1.36 KJ/mol (Mg²⁺)), the uptake of these ions occurred by homogenous reactions of monolayer form and physical nature. The thermodynamic studies declared the spontaneous properties of the reactions and their exothermic properties.