Strontium Laminarin polysaccharide modulates osteogenesis-angiogenesis for bone regeneration

Artificial spinal dura mater made of gelatin microfibers and bioadhesive for preventing cerebrospinal fluid leakage

Artificial spinal dura mater was designed by combining solution blow-spun gelatin microfibers and dopamine-capped polyurethane bioadhesive. Notably, the gelatin microfibers had a special pore structure, good water adsorption capability, and excellent burst pressure resistance. The bioadhesive layer contributed to the excellent sealing performance in the wet state. This material provides a promising alternative as an artificial spinal dura mater to prevent cerebrospinal fluid leakage.

From algae to advancements: laminarin in biomedicine

Laminarin, a complicated polysaccharide originating from brown algae, has emerged as a compelling candidate in the domain of biomedical research. This enigmatic molecule, composed of glucose units associated with both β-1,3 and β-1,6 glycosidic bonds, possesses an array of remarkable characteristics that render it auspicious for multifaceted biomedical applications. This review investigates the comprehensive potential of laminarin in the biomedical domain, emphasizing its remarkable biocompatibility, low cytotoxicity, and cell proliferation support. Laminarin's immunomodulatory attributes position it as an encouraging contender in immunotherapy and the development of vaccines. Moreover, its anti-inflammatory and antioxidant characteristics provide a promising avenue for combatting conditions associated with oxidative stress. In particular, laminarin excels as a drug delivery vehicle owing to its exceptional encapsulation capabilities emerging from its porous framework. Integrating pH and redox responsiveness in laminarin-based drug delivery systems is poised to redefine targeted therapies. Laminarin substantially contributes to tissue engineering by improving adhesion, migration of cells, and deposition of extracellular matrix. This augmentation magnifies the regenerative capability of tissue-engineered constructs, substantiated by the advancement of laminarin-based wound dressings and tissue scaffolds, marking considerable progress in the domain of wound healing and tissue regeneration. While laminarin exhibits substantial potential in biomedical applications, it remains in the initial phases of exploration. Comprehensive preclinical and clinical research is warranted to verify its effectiveness and safety across various applications. In essence, laminarin, a marine marvel, has the capability to remodel biomedical research, offering inventive solutions to complex difficulties.

Seamlessly Adhesive Bionic Periosteum Patches Via Filling Microcracks for Defective Bone Healing

Current artificial designs of the periosteum focus on osteogenic or angiogenic properties, while ignoring the filling and integration with bone microcracks, which trigger a prolonged excessive inflammatory reaction and lead to failure of bone regeneration. In this study, seamless adhesive biomimetic periosteum patches (HABP/Sr-PLA) were prepared to fill microcracks in defective bone via interfacial self-assembly induced by Sr ions mediated metal-ligand interactions among pamidronate disodium-modified hyaluronic acid (HAPD), black phosphorus (BP), and hydrophilic polylactic acid (PLA). In vitro, HABP/Sr-PLA exhibited excellent self-healing properties, seamlessly filled bone microcracks, and significantly enhanced osteogenesis and angiogenesis. Furthermore, in a rat cranial defect model, HABP/Sr-PLA was demonstrated to significantly promote the formation of blood vessels and new bone under mild 808 nm photothermal stimulation (42.8 °C), and the highest protein expression of CD31 and OPN was five times higher than that of the control group and other groups. Therefore, the proposed seamless microcrack-filled bionic periosteum patch is a promising clinical strategy for promoting bone repair.

SrCuSi4 O10 /GelMA Composite Hydrogel-Mediated Vital Pulp Therapy: Integrating Antibacterial Property and Enhanced Pulp Regeneration Activity

Vital pulp therapy (VPT) is considered a conservative treatment for preserving pulp viability in caries-induced dental pulp infections. However, bacterial contamination negatively affects dentine-pulp complex repair. The common capping materials show limited antimicrobial effects against some microorganisms. To improve the VPT efficacy, capping materials with increased antibacterial properties and enhanced odontogenic and angiogenic activities are needed. Herein, a SrCuSi4 O10 /gelatin methacrylate(SC/Gel) composite hydrogel has been proposed for infected dental pulp treatment. SrCuSi4 O10 (SC) is a microscale bioceramic composed of assembled multilayered nanosheets that possesses good near-infrared photothermal conversion ability and multiple bioactivities due to sustained Sr2+ , Cu2+ , and SiO3 2- ion release. It is shown that the SC/Gel composite hydrogel efficiently eliminates Streptococcus mutans and Lactobacillus casei and inhibits biofilm formation under photothermal heating, while the ion extract from SC promotes odontogenesis of rat dental pulp stem cells and angiogenesis of human umbilical vein endothelial cells. The as-designed therapeutic effect of SC/Gel composite hydrogel-mediated VPT has been proven in a rat dental pulp infection model and yielded improved dentine-pulp complex repair compared with the commercially used iRoot® BP Plus. This study suggests that the SC/Gel composite hydrogel is a potential pulp-capping material with improved effects on dentine-pulp complex repair in infected pulp.

Recent Advance of Strontium Functionalized in Biomaterials for Bone Regeneration

Bone defect disease causes damage to people’s lives and property, and how to effectively promote bone regeneration is still a big clinical challenge. Most of the current repair methods focus on filling the defects, which has a poor effect on bone regeneration. Therefore, how to effectively promote bone regeneration while repairing the defects at the same time has become a challenge for clinicians and researchers. Strontium (Sr) is a trace element required by the human body, which mainly exists in human bones. Due to its unique dual properties of promoting the proliferation and differentiation of osteoblasts and inhibiting osteoclast activity, it has attracted extensive research on bone defect repair in recent years. With the deep development of research, the mechanisms of Sr in the process of bone regeneration in the human body have been clarified, and the effects of Sr on osteoblasts, osteoclasts, mesenchymal stem cells (MSCs), and the inflammatory microenvironment in the process of bone regeneration have been widely recognized. Based on the development of technology such as bioengineering, it is possible that Sr can be better loaded onto biomaterials. Even though the clinical application of Sr is currently limited and relevant clinical research still needs to be developed, Sr-composited bone tissue engineering biomaterials have achieved satisfactory results in vitro and in vivo studies. The Sr compound together with biomaterials to promote bone regeneration will be a development direction in the future. This review will present a brief overview of the relevant mechanisms of Sr in the process of bone regeneration and the related latest studies of Sr combined with biomaterials. The aim of this paper is to highlight the potential prospects of Sr functionalized in biomaterials.

Water-soluble PEG segmented mannose-based macromolecules: Synthesis and their biocompatibility

The macromolecular architectures, namely mannose-based methacrylate acetyl-mannopyranoside and PEG block copolymers (AB type copolymer [PEG-b-PMAM], poly(ethyleneglycol)-b-poly(methacryl-2,3,4,6-tetra-O-acetyl-D-mannopyranoside and ABA type copolymer [PMAM-b-PEG-b-PMAM], poly(methacryl-2,3,4,6-tetra-O-acetyl-D-mannopyranoside-b-poly(ethyleneglycol)-b-poly(methacryl-2,3,4,6-tetra-O-acetyl-D-mannopyranoside) were synthesized by atom transfer radical polymerization (ATRP) method that were deacetylated to generate the corresponding water-soluble and biocompatible glycopolymer macromolecules. The molecular weight of acetyl and deacetylate macromolecules was in the range of 7083-9499 and 4659-6026, as determined by GPC and proton NMR spectra. The 5 % decomposition temperatures for acetylated methacrylate macromolecules (218-299 °C) were higher than the corresponding water-soluble macromolecules (204-248 °C). The conjugation of poly(methacryl-2,3,4,6-tetra-O-acetyl-D-mannopyranoside (PMAM) segment with the PEG block decreased the glass transition (Tg) value, and the water-soluble macromolecules displayed Tg in the range of 92-95 °C. The biocompatibility of the synthesized water-soluble mannose-based macromolecules was determined using Human Bone Derived Cells (HBDC) culture with the TCP (Tissue culture plastic) template as control. Using three different concentrations of the synthesized glycopolymers, HBDC's were cultured for 1, 3, and 7 days. The effect of mannomethacrylate macromolecules on mitochondrial activity of HBDC's was estimated using colorimetry that showed the conversion of MTS [3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyl-tetrazolium-bromide] to formazan (MTS assay). ABA type diblock copolymer architecture exhibited increased absorbance values of 3 and 7 day cultures at 1-100 M concentrations, with the highest values observed at a concentration of 1 M for day 3 cultures. The design of these novel mannose-based macromolecules is important for improving cell proliferation, cell adhesion, and osteointegration efficiency.

DLP fabrication of customized porous bioceramics with osteoinduction ability for remote isolation bone regeneration

Currently, various bioceramics have been widely used in bone regeneration. However, it remains a huge challenge to remote isolation bone regeneration, such as severed finger regeneration. The remote isolation bone tissue has a poor regenerative microenvironment that lacks enough blood and nutrition supply. It is very difficult to repair and regenerate. In this study, well-controlled multi-level porous 3D-printed calcium phosphate (CaP) bioceramic scaffolds with precision customized structures were fabricated by high-resolution digital light projection (DLP) printing technology for remote isolation bone regeneration. In vitro results demonstrated that optimizing material processing procedures could achieve multi-level control of 3D-printed CaP bioceramic scaffolds and enhance the osteoinduction ability of bioceramics effectively. In vivo results indicated that 3D-printed CaP bioceramic scaffolds constructed by optimized processing procedure exhibited a promising ability of bone regeneration and osteoinduction in ectopic osteogenesis and in situ caudal vertebrae regeneration in beagles. This study provided a promising strategy based on 3D-printed CaP bioceramic scaffolds constructed by optimized processing procedures for remote isolation bone regeneration, such as severed finger regeneration.

The development of novel multifunctional drug system 7,8-DHF@ZIF-8 and its potential application in bone defect healing

Physical exercise has long been considered an essential regulator of bone formation. Recent studies have shown that brain-derived neurotrophic factor (BDNF) is an important cytokine released during physical exercise to promote osteogenic differentiation and facilitate the bone defect healing process. In this study, we developed a multifunctional system 7,8-DHF@ZIF-8, which combines the superior osteogenesis and angiogenesis properties of ZIF-8 and the unique capability of 7,8-DHF to mimic the function of BDNF to compensate for the routine physical exercise missed during the bone defect period. Various material characterizations were performed to confirm the successful synthesis of 7,8-DHF@ZIF-8. Drug release experiments suggested that 7,8-DHF@ZIF-8 could achieve slow diffusive release under physiological conditions within seven days. In vitro cell experiments indicated that low concentrations of ZIF-8 and 7,8-DHF@ZIF-8 could significantly promote the proliferation of MC3T3-E1 cells. Moreover, as proved by RT-QPCR analysis, incorporating 7,8-DHF into ZIF-8 could further enhance osteogenesis and angiogenesis-related gene expression. Therefore, we believe that the multifunctional drug system 7,8-DHF@ZIF-8 should have promising applications to facilitate bone defect healing.

Injectable Hydrogel Membrane for Guided Bone Regeneration

In recent years, multicomponent hydrogels such as interpenetrating polymer networks (IPNs) have emerged as innovative biomaterials due to the synergistic combination of the properties of each network. We hypothesized that an innovative non-animal IPN hydrogel combining self-setting silanized hydroxypropyl methylcellulose (Si-HPMC) with photochemically cross-linkable dextran methacrylate (DexMA) could be a valid alternative to porcine collagen membranes in guided bone regeneration. Calvaria critical-size defects in rabbits were filled with synthetic biphasic calcium phosphate granules in conjunction with Si-HPMC; DexMA; or Si-HPMC/DexMA experimental membranes; and in a control group with a porcine collagen membrane. The synergistic effect obtained by interpenetration of the two polymer networks improved the physicochemical properties, and the gel point under visible light was reached instantaneously. Neutral red staining of murine L929 fibroblasts confirmed the cytocompatibility of the IPN. At 8 weeks, the photo-crosslinked membranes induced a similar degree of mineral deposition in the calvaria defects compared to the positive control, with 30.5 ± 5.2% for the IPN and 34.3 ± 8.2% for the collagen membrane. The barrier effect appeared to be similar in the IPN test group compared with the collagen membrane. In conclusion, this novel, easy-to-handle and apply, photochemically cross-linkable IPN hydrogel is an excellent non-animal alternative to porcine collagen membrane in guided bone regeneration procedures.

Nano tantalum-coated 3D printed porous polylactic acid/beta-tricalcium phosphate scaffolds with enhanced biological properties for guided bone regeneration

Bone defects caused by tumors section, traffic accidents, and surgery remain a challenge in clinical. The drawbacks of traditional autografts and allografts limit their clinical application. 3D printed porous scaffolds have monumental potential to repair bone defects but still cannot effectively promote bone formation. Nano tantalum (Ta) has been reported with effective osteogenesis capability. Herein, we fabricated 3D printed PLA/β-TCP scaffold by using the fused deposition modeling (FDM) technique. Ta was doped on the surface of scaffolds utilizing the surface adhesion ability of polydopamine to improve its properties. The constructed PLA/β-TCP/PDA/Ta had good physical properties. In vitro studies demonstrated that the PLA/β-TCP/PDA/Ta scaffolds considerably promote cell proliferation and migration, and it additionally has osteogenic properties. Therefore, Ta doped 3D printed PLA/β-TCP/PDA/Ta scaffold could incontestably improve surface bioactivity and lead to better osteogenesis, which may provide a unique strategy to develop bioactive bespoke implants in orthopedic applications.

Molecular mechanisms for the prevention and promoting the recovery from ischemic stroke by nutraceutical laminarin: A comparative transcriptomic approach

Stroke is the second leading cause of death and a major cause of disability worldwide. Ischemic stroke caused by atherosclerosis accounts for approximately 87% of all stroke cases. Ischemic stroke is a preventable disease; therefore, a better understanding of the molecular mechanisms underlying its pathogenesis and recovery processes could provide therapeutic targets for drug development and reduce the associated mortality rate. Laminarin, a polysaccharide, is a nutraceutical that can be found in brown algae. Accumulating evidence suggests that laminarin could reduce the detrimental effects of neuroinflammation on brain damage after stroke. However, the molecular mechanism underlying its beneficial effects remains largely unknown. In the present study, we used a middle cerebral artery occlusion (MCAO) rat model and applied comparative transcriptomics to investigate the molecular targets and pathways involved in the beneficial effects of laminarin on ischemic stroke. Our results show the involvement of laminarin targets in biological processes related to blood circulation, oxygen supply, and anti-inflammatory responses in the normal brain. More importantly, laminarin treatment attenuated brain damage and neurodeficits caused by ischemic stroke. These beneficial effects are controlled by biological processes related to blood vessel development and brain cell death through the regulation of canonical pathways. Our study, for the first time, delineated the molecular mechanisms underlying the beneficial effects of laminarin on ischemic stroke prevention and recovery and provides novel therapeutic targets for drug development against ischemic stroke.

Synthesis, Characterization, and Bioactivities of Polysaccharide Metal Complexes: A Review

Natural polysaccharides are critical to a wide range of fields (e.g., medicine, food production, and cosmetics) for their various remarkable physical properties and biological activities. However, the bioactivities of naturally acquired polysaccharides may be unsatisfactory and limit their further applications. It is generally known that the chemical structure exhibited by polysaccharides lays the material basis for their biological activities. Accordingly, possible structural modifications should be conducted on polysaccharides for their enhancement. Recently, polysaccharides complexed with metal ions (e.g., Fe, Zn, Mg, Cr, and Pt) have been reported to be possibly used to improve their bioactivities. Moreover, since the properties exhibited by metal ions are normally conserved, polysaccharides may be endowed with new applications. In this review, the synthesis methods, characterization methods, and bioactivities of polysaccharide metal complexes are summarized specifically. Then, the application prospects and limitations of these complexes are analyzed and discussed.

Surface Modification of Poly(ether ether ketone) by Simple Chemical Grafting of Strontium Chondroitin Sulfate to Improve its Anti-Inflammation, Angiogenesis, Osteogenic Properties

Besides inducing osteogenic differentiation, the surface modification of poly(ether ether ketone) (PEEK) is highly expected to improve its angiogenic activity and reduce the inflammatory response in the surrounding tissue. Herein, strontium chondroitin sulfate is first attempted to be introduced into the surface of sulfonated PEEK (SPEEK-CS@Sr) based on the Schiff base reaction between PEEK and ethylenediamine (EDA) and the amidation reaction between EDA and chondroitin sulfate (CS). The surface characteristics of SPEEK-CS@Sr implant are systematically investigated, and its biological properties in vitro and in vivo are also evaluated. The results show that the surface of SPEEK-CS@Sr implant exhibits a 3D microporous structure and good hydrophilicity, and can steadily release Sr ions. Importantly, the SPEEK-CS@Sr not only displays excellent biocompatibility, but also can remarkably promote cell adhesion and spread, improve osteogenic activity and angiogenic activity, and reduce the inflammatory response compared to the original PEEK. Therefore, this study presents the surface modification of PEEK material by simple chemical grafting of strontium chondroitin sulfate to improve its angiogenesis, anti-inflammation, and osteogenic properties, and the as-fabricated SPEEK-CS@Sr has the potential to serve as a promising orthopedic implant in bone tissue engineering.