Fabrication of dual layered biocompatible herbal biopatch from biological waste for skin - tissue regenerative applications

Fabrication of highly flexible biopolymeric chitosan/agarose based bioscaffold with Matricaria recutita herbal extract for antimicrobial wound dressing applications

A flexible biopolymer-based antimicrobial wound dressing has the potential to alleviate the burden of bacterial infections in wounds by enhancing antimicrobial effectiveness and promoting faster wound healing. This study focuses on the development of a highly flexible chitosan-agarose (CS-AG) bioscaffold, incorporating Matricaria recutita chamomile flower extract (CH) through a conventional casting method. The flexible CS-AG bioscaffold's physiochemical properties were confirmed by FTIR, indicating secondary interactions, and XRD, showing its crystalline structure. The addition of CH to the optimized CS-AG bioscaffold resulted in significant tensile strength (17.28 ± 0.33 MPa), distinctive structural morphology (SEM), surface roughness (AFM), contact angle, improved thermal properties (DSC), and enhanced thermal stability (TGA). Furthermore, the CH-infused bioscaffold significantly increased swelling capacity (~81.09 ± 1.74 % over 48 h), and degradation profile (~52 % over 180 h). The release studies of CS-AG-CH bioscaffold demonstrate controlled release of CH with in the bioscaffold at different pH conditions. The bioscaffold demonstrated effective antibacterial activity against S. aureus and E. coli strains. Additionally, cytotoxicity assays indicated that the bioscaffold supports better cell viability and proliferation in fibroblast (NIH 3T3) cell lines. Consequently, this antimicrobial bioscaffold shows promise as a drug release system and biocompatible wound dressing suitable for tissue engineering applications.

β-Cyclodextrin/dialdehyde glucan-coated keratin nanoparticles for oral delivery of insulin

Successful oral insulin administration can considerably enhance the quality of life (QOL) of diabetes patients who must frequently take insulin injections. However, Oral insulin administration is seriously hampered by gastrointestinal enzymes, wide pH range, mucus and mucosal layers, which limit insulin oral bioavailability to ≤2 %. Herein, we developed a simple, inexpensive and safe dual β-cyclodextrin/dialdehyde glucan-coated keratin nanoparticle (β-CD-K-IN-DG). The resulted β-CD-K-IN-DG not only gave the ultra-high insulin loading (encapsulation efficiency (98.52 %)), but also protected insulin from acid and enzymatic degradation. This β-CD-K-IN-DG had a notable hypoglycemic effect, there was almost 80 % insulin release after 4 h of incubation under hyperglycemic conditions. Ex vivo results confirmed that β-CD-K-IN-DG possessed high mucus-penetration ability. Transepithelial transport and uptake mechanism studies revealed that bypass transport pathway and endocytosis promoted β-CD-K-IN-DG entered intestinal epithelial cells, thus increased the bioavailability of insulin (12.27 %). The improved stability of insulin during in vivo transport implied that β-CD-K-IN-DG might be a potential tool for the effective oral insulin administration.

Degradable biomedical elastomers: paving the future of tissue repair and regenerative medicine

Degradable biomedical elastomers (DBE), characterized by controlled biodegradability, excellent biocompatibility, tailored elasticity, and favorable network design and processability, have become indispensable in tissue repair. This review critically examines the recent advances of biodegradable elastomers for tissue repair, focusing mainly on degradation mechanisms and evaluation, synthesis and crosslinking methods, microstructure design, processing techniques, and tissue repair applications. The review explores the material composition and cross-linking methods of elastomers used in tissue repair, addressing chemistry-related challenges and structural design considerations. In addition, this review focuses on the processing methods of two- and three-dimensional structures of elastomers, and systematically discusses the contribution of processing methods such as solvent casting, electrostatic spinning, and three-/four-dimensional printing of DBE. Furthermore, we describe recent advances in tissue repair using DBE, and include advances achieved in regenerating different tissues, including nerves, tendons, muscle, cardiac, and bone, highlighting their efficacy and versatility. The review concludes by discussing the current challenges in material selection, biodegradation, bioactivation, and manufacturing in tissue repair, and suggests future research directions. This concise yet comprehensive analysis aims to provide valuable insights and technical guidance for advances in DBE for tissue engineering.

Fabrication of bioinspired keratin/sodium alginate based biopolymeric mat loaded with herbal drug and green synthesized zinc oxide nanoparticles as a dual drug antimicrobial wound dressing

Dual drug antibacterial wound dressings with biological materials possess crucial wound healing characteristics including biocompatibility, non-toxicity, degradability, mechanical strength and antibacterial properties. The study focusses on fabricating keratin (K)‑sodium alginate (A) based wound dressings by loading green synthesized zinc oxide nanoparticles (ZnO NPs) using C. roseus (leaf extract) and M. recutita (Chamomile flower part) herbal drug (CH) as a bioactive dual antibacterial wound dressing for the first time. The optimized ZnO NPs and CH exhibits strong physiochemical and electrostatic interactions (FT-IR, XRD and SEM) on the fabricated K-A-CH-ZnO biopolymeric mats. Moreover, the tiny porous network of the biopolymeric mat enhances thermal stability, hydrophilicity, mechanical strength and explores the water vapor transmission (2538.07 g/m2/day) and oxygen permeability (7.38 ± 0.31 g/m2) to maintain moist environment and cell-material interactions. During enzymatic degradation studies, ZnO NPs and CH of biopolymeric mat not only retains structural integrity but also increases the characteristic of swelling with sustained drug release (57 %) in 144 h which accelerates wound healing process. Also, K-A-CH-ZnO mat exhibited excellent antibacterial effects against B. subtilis and E. coli. Furthermore, NIH 3T3 fibroblast cell behavior using MTT assay and in vivo evaluations of biopolymeric mat depicted enhanced biocompatibility with increased collagen deposition at the wound site as a prominent dual drug medicated antimicrobial wound dressing.

Fabrication of 3D printed PCL/PEG artificial bile ducts as supportive scaffolds to promote regeneration of extrahepatic bile ducts in a canine biliary defect model

In this study, a 3D porous poly(ε-caprolactone)/polyethylene glycol (PCL/PEG) composite artificial tubular bile duct was fabricated for extrahepatic bile duct regeneration. PCL/PEG composite scaffolds were fabricated by 3D printing, and the molecular structure, mechanical properties, thermal properties, morphology, and in vitro biocompatibility were characterized for further application as artificial bile ducts. A bile duct defect model was established in beagle dogs for in vivo implantation. The results demonstrated that the implanted PE1 ABD, serving as a supportive scaffold, effectively stimulated the regeneration of a new bile duct comprising CK19-positive and CK7-positive epithelial cells within 30 days. Remarkably, after 8 months, the newly formed bile duct exhibited an epithelial layer resembling the normal structure. Furthermore, the study revealed collagen deposition, biliary muscular formation, and the involvement of microvessels and fibroblasts in the regenerative process. In contrast, the anastomotic area without ABD implantation displayed only partial restoration of the epithelial layer, accompanied by fibroblast proliferation and subsequent bile duct fibrosis. These findings underscore the limited inherent repair capacity of the bile duct and underscore the beneficial role of the PE1 ABD artificial tubular bile duct in promoting biliary regeneration.

Synthesis of chitosan based reduced graphene oxide-CeO2 nanocomposites for drug delivery and antibacterial applications

In this study, the unique characteristics of chitosan, reduced graphene oxide (rGO) and cerium oxide (CeO2) based hybrid bionano-composites make a carrier for various drug delivery and antimicrobial applications. The recent literatures shown that addition of biopolymers to rGO and CeO2 based nanocomposites exhibit excellent performance in design and development of biosensors, wound dressings, electrodes, microfluidic chips, drug delivery systems and energy storage applications. Chitosan (CS), reduced graphene oxide (rGO) mixed with cerium oxide (CeO2) to form CS-rGO and CS-rGO-CeO2 hybrid bionano-composites using precipitation method. The physiochemical characterization of casted nanocomposite sheet was done using FTIR, XRD, UV-Vis spectrum, SEM and TGA. The XRD results of CS-rGO-CeO2 revealed that the nanoparticle was found to be crystalline structure. FTIR revealed that nitrogen functionalities of CS interacted with rGO-CeO2 to form hybrid nanocomposites. The thermal gravimetric analysis (TGA) showed that the CS-rGO-CeO2 has better thermal stability up to 550 °C. The SEM confirms the surface morphology of CS-rGO-CeO2 has large surface area with smooth surface. Moreover, the antibacterial properties of nanocomposites exhibit excellent zone of inhibition against Staphylococcus aureus and Escherichia coli. The NIH3T3 cell line evaluations showed superior cell adhesion on hybrid nanocomposites. Hence bionano-composite based on CS, rGO and CeO2 are potential biomaterials for drug delivery and antibacterial applications.

Fabrication and characterization of apigenin-loaded chitosan/gelatin membranes for bone tissue engineering applications

Fabricating degradable polymer-based membranes has attracted much attention for guided bone regeneration. Chitosan/gelatin (Cs/Gel) composites are among the most known scaffolds with structural similarity to bone matrix and a high potential to support cell attachment and proliferation. Recently, plant-derived phenolic compound apigenin has been identified to direct the osteogenic differentiation of mesenchymal stem cells and retain osteoblast metabolic functions. We incorporated apigenin into Cs/Gel membranes to improve apigenin bioavailability and get proper concentrations for efficient biological activities. Apigenin-loaded Cs/Gel membranes were prepared using a solution casting method with various apigenin contents (0, 10, 25, 50, and 100 µM). Chemical composition, morphological characteristics, swelling behavior, degradation rate, and apigenin release from membranes were evaluated. Saos-2 osteoblasts were cultured on membranes to investigate cell-membrane interaction, proliferation, viability, and mineralization under the osteogenic culture condition. The results showed that membranes had homogeneous and moderate rough surfaces, facilitating osteoblast attachment and expansion. Swelling ratios exceeded 200%, reaching a stable rate in 24 h. Apigenin-loaded membranes degraded slower in vitro. Membranes containing lower apigenin concentrations exhibited a higher cargo release profile over 21 days. Apigenin improved osteoblast proliferation and viability, but the mineralization depended on apigenin dose, with optimized values at low concentrations. These data suggested that Cs/Gel membranes loaded with low apigenin contents improved osteoblast survival, proliferation, and mineralization.

A composite scaffold fabricated with an acellular matrix and biodegradable polyurethane for the in vivo regeneration of pig bile duct defects

Bile duct regeneration is urgently needed to restore the normal function of the damaged biliary system. In this study, an artificial bile duct (ABD) was fabricated for extrahepatic bile duct regeneration based on biodegradable polyurethane (BPU) and ureter acellular matrix (UAM) to endow it with favorable biocompatibility and eliminate bile leakage during in vivo bile duct regeneration. The mechanical properties, in vitro simulation of bile flow and cytocompatibility of BPU-UAM ABD were evaluated in vitro, and surgical implantation in the biliary defect site in minipigs was implemented to reveal the in vivo degradation of BPU-UAM and regeneration of the new bile duct. The results indicated that BPU-UAM ABD with a mechanical strength of 11.9 MPa has excellent cytocompatibility to support 3T3 fibroblast survival and proliferation in extraction medium and on the scaffolds. The in vivo implantation of BPU-UAM ABD revealed the change of collagen content throughout the new bile duct regeneration. Biliary epithelial cells were observed at day 70, and continuous biliary epithelial layer formation was observed after 100 days of implantation. Altogether, the BPU-UAM ABD fabricated in this study possesses excellent properties for application study in the regeneration of bile duct. STATEMENT OF SIGNIFICANCE: Extrahepatic bile duct defects carry considerable morbidity and mortality because they are the only pathway for bile to go down into the intestinal tract. At present, no artificial bile duct can promote biliary regeneration. In this study, BPU-UAM ABD was built based on biodegradable polyurethane and ureter acellular matrix to form a continuous compact layer of polyurethane in the internal wall of UAM and avoid bile leakage and experimental failure during in vivo implantation. Our work verified the effectiveness of the synthesized biodegradable polyurethane emulsion-modified urethral acellular matrix in bile regeneration and continuous biliary epithelial layer formation. This study provided a new approach for the curing of bile duct defects and inducing new bile tissue formation.

Keratin-based wound dressings: From waste to wealth

Keratin is a natural protein with a high content of cysteine residues (7-13%) and is widely found in hair, wool, horns, hooves, and nails. Keratin possesses abundant cell-binding motifs such as leucine-aspartate-valine (LDV), glutamate-aspartate-serine (EDS), and arginine-glycine-aspartate (RGD), which benefit cell attachment and proliferation. It has been confirmed that keratin plays important roles in every stage of wound healing, including hemostasis, inflammation, proliferation, and remodeling, making keratin-based materials good candidates for wound dressings. In combination with synthetic and natural polymers, keratin-based wound dressings in the forms of films, hydrogels, and nanofibers can be achieved with improved mechanical properties. This review focuses on the recent development of keratin-based wound dressings. Firstly, the physicochemical and biological properties of keratin, are systematically discussed. Secondly, the role of keratin in wound healing is proposed. Thirdly, the applications of keratin-based wound dressings are summarized, in terms of the forms and functionalization. Finally, the current challenges and future development of keratin-based wound dressings are presented.

HPLC–NMR-Based Chemical Profiling of Matricaria pubescens (Desf.) Schultz and Matricaria recutita and Their Protective Effects on UVA-Exposed Fibroblasts

The present study aimed to investigate the chemical profile and the protective activity on fibroblasts of two Matricaria species: M. pubescens, which grows wild in Algeria, and M. recutita, which is cultivated in Greece. A comparative phytochemical investigation using High-Performance Liquid Chromatography, coupled with Photodiode Array Detection and Mass Spectrometry (HPLC–PDA–MS) combined with Nuclear Magnetic Resonance (NMR), was performed for the identification of the main constituents in the flowerheads of these medicinal plants. In M. pubescens more than 25 compounds were identified and/or isolated; among them are quercetagenin-3-O-glucopyranoside, reported for the first time in Matricaria sp., and two polyamines previously reported in other Asteraceae species. In M. recutita, which is the officially recognized species in Europe, 19 constituents were identified. To minimize time analysis, the structure elucidation was based on a multi-analytical approach directly on subfractions. Two representative polar extracts from each species were characterized chemically and further screened for their protective effects on 3T3 fibroblasts. The cells were exposed to a mild toxic dose of UVA light (6 J/cm2), in the presence of different concentrations of the extracts. Both M. recutita and M. pubescens extracts were effective. The methanolic extract was the best protective agent at lower concentrations (0.1 to 10 μg/mL), and hydromethanolic was best at higher ones (100–200 μg/mL). M. recutita exhibited the most enhanced cell viability in relation to those not exposed to UV control; it ranged from of 28 to 49% higher viability, depending on the dose, leading to the conclusion that the latter seems to exhibit potent cytoprotective activity and significant regeneration activity.

Novel fabrication of bi-metal oxide hybrid nanocomposites for synergetic enhancement of in vivo healing and wound care after caesarean section surgery

In the current study, bi‐metal oxide hybrid nanocomposites prepared by cerium oxide (CeO₂) nanoparticles are included into chitosan‐ZnO composites for developing the potential materials of dressing the wound. The wound healing effect of prepared hybrid nanocomposites was evaluated regarding the surface morphology, functional groups, thermal degradation and composite size. The antimicrobial activity of chitosan‐ZnO/CeO₂ hybrid nano composites was tested against the pathogens of Staphylococcus aureus and Escherichia coli. The hybrid nanocomposites containing CeO₂‐based chitosan and ZnO nanoparticles were taken for optimum dressing included in the vivo studies on the excisional wounds in wistar rats. After 2 weeks, it is seen that the wound treated with CS‐ZnO/CeO₂ hybrid nano composites consists of the significant dressing of nearly 100% compared with control which showed nearly 65% of wound closure. Finally, our reported results gave the proof in supporting the availability of CS‐ZnO/CeO₂ hybrid nanocomposites contains the dressing of the wounds for the treatment.