Effects of nanocellulose fiber and thymol on mechanical, thermal, and barrier properties of corn starch films

Effects of biodegradation of starch-nanocellulose films incorporated with black tea extract on soil quality

This study aimed to investigate the biodegradation behaviour of starch/nanocellulose/black tea extract (SNBTE) films in a 30-day soil burial test. The SNBTE films were prepared by mixing commercial starch, nanocellulose (2, 4, and 6%), and an aqueous solution of black tea extract by a simple mixing and casting process. The chemical and morphological properties of the SNBTE films before and after biodegradation were characterized using the following analytical techniques such as field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), and fourier transform infrared (FTIR). The changes in soil composition, namely pH, electrical conductivity (EC), moisture content, water holding capacity (WHC), soil respiration, total nitrogen, weight mean diameter (MDW), and geometric mean diameter (GMD), as a result of the biodegradation process, were also estimated. The results showed that the films exhibited considerable biodegradability (35-67%) within 30 days while increasing soil nutrients. The addition of black tea extract reduced the biodegradation rate due to its polyphenol content, which likely resulted in a reduction in microbial activity. The addition of nanocellulose (2-6% weight of starch) increased the tensile strength, but decreased the elongation at break of the films. These results suggest that starch nanocellulose and SNBTE films are not only biodegradable under soil conditions but also positively contribute to soil health, highlighting their potential as an environmentally friendly alternative to traditional plastic films in the packaging industry.

Enhancing mechanical and water barrier properties of starch film using chia mucilage

Biodegradable packaging materials are increasingly being investigated due to rising concerns about food safety and environmental conservation. This study examines the incorporation of chia mucilage (CM) into starch-based films using the casting method, aiming to understand its effects on the structure and functionality of the films. CM, an anionic heteropolysaccharide, is hypothesized to enhance the mechanical and barrier properties of the films through polymer interactions and hydrogen bonding. Our findings confirm that CM incorporation results in films with uniformly smooth surfaces, indicating high compatibility and homogeneity within the starch matrix. Notably, CM improves film transparency and crystallinity. Mechanical assessments show a remarkable elevation in tensile strength, soaring from 5.21 MPa to 12.38 MPa, while elongation at break decreases from 61.73 % to 31.42 %, indicating a trade-off between strength and flexibility. Additionally, water solubility decreases from 57.97 % to 41.40 %, and water vapor permeability is reduced by 30 % with CM loading. These results highlight the role of CM in facilitating the formation of a dense, interconnected polymeric network within the starch matrix. Given the soluble dietary fiber nature of CM, the CS/CM (corn starch/chia mucilage) blended films are expected to be safe for food packaging and applicable as edible films with health benefits.

Isolation of taro peel cellulose nanofibers and its application in improving functional properties of taro starch nanocomposites films

The current work focuses on developing nanocomposite films using taro starch and cellulose nanofibers extracted from the root's peel. Films were prepared using mixtures of starch, cellulose nanofibers (0 %, 5 %, 10 %, and 15 % w/w), glycerol, and water. Results showed that the addition of cellulose nanofibers increased film thickness, opacity, UV-light barrier capacity, and water swelling percentage. All films showed a typical B-type X-ray diffraction pattern characteristic of semicrystalline materials. FTIR analysis confirmed chemical interactions between the starch chains and the nanofibers, which probably interact through hydrogen bonds. Nanocomposite films exhibited increased tensile strength and reduced strain at break compared to control materials. Films with cellulose nanofibers showed an increase in Young's modulus compared to control ones, with no differences observed between films with cellulose nanofibers at 10 % and 15 %. Furthermore, films with cellulose nanofibers at 5 % and 10 % exhibited lower water vapor permeability than control samples, while those with cellulose nanofibers at 15 % showed an increase in this parameter compared to other materials. These results suggest that incorporating taro cellulose nanofibers is a promising alternative for obtaining taro starch nanocomposites films with improved properties.

Development and application of mathematical modeling of thymol release from environmental-responsive potato starch active packaging films

Traditional active packaging materials are easily affected by the environment, resulting in their inability to release active substances in specified quantities at specified times and locations. In this study, MCM-41 was used as a thymol (THY) carrier and added to the potato starch (PS) matrix to design an intelligent release active packaging film based on storage microenvironment. MCM-41 encapsulation improved thermal stability of THY. THY-MCM-41 addition significantly improved the tensile strength (TS, 7.18 MPa) of the film (P < 0.05) and endowed the film excellent gas and water barrier protection. THY release was responsive to temperature and relative humidity (RH), and the First-order model better explained the THY release pattern (R2 > 0.980). The THY-MCM-41/PS film exhibited long-term antibacterial effect during 10-day storage due to the sustained release of THY. Additionally, strawberries packaged in the THY-MCM-41/PS film exhibited the best sensory characteristics during 5-day storage (25 °C and 50 % RH). Overall, the present THY-MCM-41/PS film provides a novel alternative for the sustained release of active substances in order to achieve the excellent preservation of goods such as fruits and vegetables.

Limonene and its derived oligomer as bioactive additives in starch/coffee husks biocomposites for food packaging applications

In this study, antioxidant, and antimicrobial starch-based biocomposite films reinforced with coffee husks (S/CH) were developed by incorporating either limonene (LM) (S/CH/LM) or its oligomer derivative, poly(limonene) (PLM) (S/CH/PLM), at different concentrations (5-10 % w/w of starch). Through a comprehensive assessment of film properties, morphology, and structure, a comparative analysis between the two additives was proposed. Scanning electron microscopy (SEM) revealed some defects throughout the polymer matrix after additive incorporation. The tensile strength (TS) and modulus of elasticity (ME) showed a decrease upon the inclusion of both LM and PLM, while the elongation at break (E) increased. Notably, PLM exhibited outstanding antioxidant capacity, enhancing the films by 108 % over control samples. Additionally, at just 5 % concentration, PLM effectively inhibited the growth of Escherichia coli ATCC 11775 (35.33 ± 2.52 mm) and demonstrated an impressive UV-Vis barrier, comparable to the highest amount of LM incorporated. Therefore, this research highlights the potential of coffee husk-reinforced starch biocomposites with limonene-derived additives as a promising solution for food packaging applications. The comparative analysis sheds light on the advantages of using the PLM in terms of antioxidant and antimicrobial properties, contributing to the advancement of active packaging technologies.

Evaluation of Starch-Garlic Husk Polymeric Composites through Mechanical, Thermal, and Thermo-Mechanical Tests

The present work evaluates the influence of different properties of composite materials from natural sources. Films were prepared using the evaporative casting technique from corn starch reinforced with a waste material such as garlic husk (GH), using glycerin as a plasticizer. The results of the syntheses carried out demonstrated the synergy between these materials. In the morphological analysis, the compatibility and adequate dispersion of the reinforcer in the matrix were confirmed. Using Fourier transform infrared spectroscopy (FTIR), the interaction and formation of bonds between the matrix and the reinforcer were confirmed by the presence of some signals such as S-S and C-S. Similarly, thermogravimetric analysis (TGA) revealed that even at low concentrations, GH can slightly increase the decomposition temperature. Finally, from the results of dynamic mechanical analysis (DMA), it was possible to identify that the storage modulus increases significantly, up to 115%, compared to pure starch, especially at low concentrations of the reinforcer.

Effect of thymol on properties of bionanocomposites from poly (lactic acid)/poly (butylene succinate)/nanofibrillated cellulose for food packaging application

The present study developed the formulation of active bionanocomposites films endowed with the abilities of high biodegradability and antimicrobials for active packaging applications. The aim of this work was to prepare poly (lactic acid)/poly (butylene succinate) (PLA/PBS) blended films reinforced with different concentrations of nanofibrillated cellulose (NFC) and 9 % of thymol essential oil (EO) using the casting method. The active films were further evaluated through Fourier transform infrared spectroscopy (FTIR); as well as mechanical, physical, water vapour permeability (WVP), thermal analysis (TGA), biodegradation, morphological, and antimicrobial (% reduction of bacteria) testing. The tensile strength (TS) of PLA/PBS blend films increased by 12 % with the incorporation of 2 wt% of NFC. The PLA/PBS/NFC with 9 % thymol EO has a good water barrier performance with its tensile strength, elongation at break, and tensile modulus was 13.2 MPa, 13.1 %, and 513 MPa respectively. The presence of NFC promoted the disintegration of PLA/PBS films by 70.5 %. These films promoted the antibacterial activity against S. aureus and E. coli. The study demonstrates that the developed films improved the qualities of chicken fillets and have great potential to be used as active bionanocomposites in food packaging applications.

Application of Tannic Acid and Fe3+ Crosslinking-Enhanced Pectin Films for Passion Fruit Preservation

In this work, the role of tannic acid (TA) and Fe3+ in crosslinking pectin (PE) to enhance its physicochemical properties was investigated. Specifically, PE/TA/Fe3+ composite films were prepared using the solution casting method, and the UV-blocking properties, transparency, water content, physico-mechanical properties, antioxidant properties and degradability of the PE composite films were investigated. The microstructure of the PE composite films and the interactions between the contained components were analyzed using FTIR, X_crystal diffraction and SEM scanning electron microscopy. The results showed that the addition of TA and Fe3+ can significantly improve the UV barrier properties and antioxidant properties of PE films. Meanwhile, Fe3+ could form a metal phenol network with TA and crosslink with the PE film, which makes the structure of the PE film denser and thus significantly reduces the water vapor permeability of the PE film. In addition, this work also indicated that the PE composite coatings have a favorable preservation effect on passion fruit, which leads to the lowest weight loss rate and wrinkle index of the passion fruit within 7 days of storage and shows good appearance quality and commercial value. This work indicates that the addition of tannic acid and Fe3+ significantly improved the mechanical and barrier properties of pectin films, and the composite pectin coating extended the shelf life of passion fruit.

Development of an edible food packaging gelatin/zein based nanofiber film for the shelf-life extension of strawberries

An edible food packaging gelatin/zein nanofiber film co-loaded with cinnamaldehyde (CA)/thymol (THY) was developed, which possessed outstanding features conducive to strawberries preservation. Firstly, the synergistic antibacterial behavior of CA and THY was investigated. Then CA and THY were co-loaded into gelatin/zein nanofiber films by electrospinning technology. The addition of CA and THY increased water contact angle to 85.1° after 10 s and decreased the water vapor transmission rate of 3.1×10^-8 g·mm^-1·h^-1·Pa^-1. The tensile strength was 1.30 MPa and the elongation at break was 185%. The nanofiber films exhibited good shielding effect of ultraviolet-visible light and excellent antioxidant capacity with DPPH free radical scavenging percentage of 99.9% in 4 h. The nanofiber films (12.5 mg/mL) could achieve significant inhibition effects on Escherichia coli ATCC 25922 with the bacteriostatic ratio of 67.5%, Staphylococcus aureus ATCC 6538 and Listeria monocytogenes ATCC 19115 with the antibacterial ratios of 100%. A real-time study on the nanofiber films as fruit packaging materials was carried out on strawberries and the packaged strawberries kept their freshness as long as 7 days at room temperature. Therefore, the GZ/CT nanofiber film prepared in this work has good application potential in the field of fruit packaging.

Development of nanocellulose fiber reinforced starch biopolymer composites: a review

In the last few years, there are rising numbers for environmental waste due to factors such as plastic based food packaging that really need to get enough attention in order to prevent the issue from becoming worse and bringing disaster to society. Thus, the uses of plastic composite materials need to be reduced and need to be replaced with materials that are natural and have low degradation to preserve nature. Based on the statistics for the global, the production of plastic has been roughly calculated for passing 400 million metric tons every year and has a high probability of approaching the value of 500 million metric tons at the year of 2025 and this issue needs to be counteracted as soon as possible. Due to that, the increasing number for recent development of natural biopolymer, as an example starch, has been investigated as the substitution for the non-biodegradable biopolymer. Besides, among all biodegradable polymers, starch has been considered as promising substitution polymer due to its renewability, easy availability, and biodegradability. Apart from that, by the reinforcement from the nanocellulose, starch fiber has an increasing in terms of mechanical, barrier and thermal properties. In this review paper, we will be discussing the up-to-date development of nanocellulose fiber reinforced starch biopolymer composites throughout this century.

Lignin Nanoparticles for Enhancing Physicochemical and Antimicrobial Properties of Polybutylene Succinate/Thymol Composite Film for Active Packaging

The natural abundance, polymer stability, biodegradability, and natural antimicrobial properties of lignin open a wide range of potential applications aiming for sustainability. In this work, the effects of 1% (w/w) softwood kraft lignin nanoparticles (SLNPs) on the physicochemical properties of polybutylene succinate (PBS) composite films were investigated. Incorporation of SLNPs into neat PBS enhanced T_d from 354.1 °C to 364.7 °C, determined through TGA, whereas T_g increased from -39.1 °C to -35.7 °C while no significant change was observed in T_m and crystallinity, analyzed through DSC. The tensile strength of neat PBS increased, to 35.6 MPa, when SLNPs were added to it. Oxygen and water vapor permeabilities of PBS with SLNPs decreased equating to enhanced barrier properties. The good interactions among SLNPs, thymol, and PBS matrix, and the high homogeneity of the resultant PBS composite films, were determined through FTIR and FE-SEM analyses. This work revealed that, among the PBS composite films tested, PBS + 1% SLNPs + 10% thymol showed the strongest microbial growth inhibition against Colletotrichum gloeosporioides and Lasiodiplodia theobromae, both in vitro, through a diffusion method assay, and in actual testing on active packaging of mango fruit (cultivar "Nam Dok Mai Si Thong"). SLNPs could be an attractive replacement for synthetic substances for enhancing polymer properties without compromising the biodegradability of the resultant material, and for providing antimicrobial functions for active packaging applications.

The physiochemical and photodynamic inactivation properties of corn starch/erythrosine B composite film and its application on pork preservation

This study explored the effect of erythrosine B (EB) as a photosensitizer in corn starch (CS) film and its physicochemical properties and photodynamic bacteriostatic ability against Staphylococcus aureus, Escherichia coli, and Salmonella both in vitro and inoculated on pork under the irradiation of D65 light-emitting diode (LED) (400-800 nm). The study revealed that the physiochemical properties of CS films: moisture content, water solubility, and water vapor transmission were improved with the addition of EB. In addition, the elasticity and the thermal stability of the film were enhanced. The results showed that the CS-EB films stimulated a maximum of 26.36 μg/mL hydrogen peroxide and 74.5 μg/g hydroxyl radical under irradiation. The CS composite films with a 5 % concentration of EB inhibited the bacterial growth by 4.7 Log CFU/mL in vitro after 30 min of illumination, and 2.4 Log CFU/mL on the pork samples under the same experimental condition. Moreover, the antibacterial ability was enhanced with the increase in EB concentration. Overall, the CS-EB composite films can inhibit the growth of bacteria through photodynamic inactivation and has the potential to become a new type of environmentally friendly packaging material.

Optimization of the Formulation of Sago Starch Edible Coatings Incorporated with Nano Cellulose Fiber (CNF)

This study aimed to produce new edible coatings based on the mixture of sago starch, cellulose nanofiber (CNF), glycerol, and tween-80.The effect of sago starch (5–10 g of starch/100 ml of distilled water), CNF (0.5–20% w/w), glycerol (10–30% w/w), and tween-80 (0.5–10% w/w) based on sago starch concentration on contact angle (CA), water vapor permeability (WVP), oxygen permeability (PO2) and tensile strength (TS) properties of the edible coatings were optimized using factorial experimental design (2k).The result showed that the linear model for all independent variables was significant (<i>P</i><0.05) on all responses (dependent variable).The sago starch concentration depicted a significant (p < 0.001) positive effect on contact angle; CNF showed a statistically significant effect on WVP, PO2, and TS; tween-80 showed a significant effect on all dependent variables, whereas glycerol only affected WVP. The optimum concentrations of sago starch, CNF, glycerol, and tween-80 were predicted to be 5 g/100 ml distilled water, 20% w/w, 10% w/w, and 0.5% w/w based on sago starch, respectively to obtain the minimum contact angle, WVP, PO2, and the maximum TS. The predicted data for the optimized coating formulation were in good agreement with the experimental value. This work revealed that the potential of sago starch/CNF based coating formulation could be effectively produced and successfully applied for coating of food.

Environmental Properties and Applications of Biodegradable Starch-Based Nanocomposites

In recent years, the demand for environmental sustainability has caused a great interest in finding novel polymer materials from natural resources that are both biodegradable and eco-friendly. Natural biodegradable polymers can displace the usage of petroleum-based synthetic polymers due to their renewability, low toxicity, low costs, biocompatibility, and biodegradability. The development of novel starch-based bionanocomposites with improved properties has drawn specific attention recently in many applications, including food, agriculture, packaging, environmental remediation, textile, cosmetic, pharmaceutical, and biomedical fields. This paper discusses starch-based nanocomposites, mainly with nanocellulose, chitin nanoparticles, nanoclay, and carbon-based materials, and their applications in the agriculture, packaging, biomedical, and environment fields. This paper also focused on the lifecycle analysis and degradation of various starch-based nanocomposites.

Characterization of active and pH-sensitive poly(lactic acid) (PLA)/nanofibrillated cellulose (NFC) films containing essential oils and anthocyanin for food packaging application

Active and pH-sensitive films of poly(lactic acid) (PLA)/nanofibrillated cellulose (NFC) have been fabricated and tested. The PLA and PLA/NFC films with 1.5% NFC were prepared via solvent casting method, with different loadings of essential oil (EO), including thymol and curry, being added at 5, 10, and 15%. The fixed content of anthocyanin powder (1%) was incorporated into the films as a pH indicator. The active PLA and PLA/NFC films were characterised on their physical, mechanical, thermal, and biodegradation properties. The addition of NFC reduced the tensile strength but increased the flexibility of films due to the plasticizing effect of EOs. The PLA/EO and PLA/NFC/EO films containing curry demonstrated a slightly higher strength than the films with thymol. The flexibility of films was increased at higher loading of EO regardless of the types of EO. The thermal profile demonstrated that the neat PLA film had a higher maximum degradation temperature than the active PLA/EO and PLA/NFC/EO films. The active PLA/EO and PLA/NFC/EO films containing anthocyanin successfully changed its colour in pH 2.0 and 14.0. The PLA/NFC films with thymol and anthocyanin formulation could inhibit fungus growth better in the cherry tomato sample than the PLA/NFC films with curry and anthocyanin.

Current Trends in the Utilization of Essential Oils for Polysaccharide- and Protein-Derived Food Packaging Materials

Essential oils (EOs) have received attention in the food industry for developing biopolymer-derived food packaging materials. EOs are an excellent choice to replace petroleum-derived additives in food packaging materials due to their abundance in nature, eco-friendliness, and superior antimicrobial and antioxidant attributes. Thus far, EOs have been used in cellulose-, starch-, chitosan-, and protein-based food packaging materials. Biopolymer-based materials have lower antioxidant and antibacterial properties in comparison with their counterparts, and are not suitable for food packaging applications. Various synthetic-based compounds are being used to improve the antimicrobial and antioxidant properties of biopolymers. However, natural essential oils are sustainable and non-harmful alternatives to synthetic antimicrobial and antioxidant agents for use in biopolymer-derived food packaging materials. The incorporation of EOs into the polymeric matrix affects their physicochemical properties, particularly improving their antimicrobial and antioxidant properties. EOs in the food packaging materials increase the shelf life of the packaged food, inhibit the growth of microorganisms, and provide protection against oxidation. Essential oils also influence other properties, such as tensile, barrier, and optical properties of the biopolymers. This review article gives a detailed overview of the use of EOs in biopolymer-derived food packaging materials. The innovative ways of incorporating of EOs into food packaging materials are also highlighted, and future perspectives are discussed.

Novel application of ion exchange membranes for preparing effective silver and copper based antibacterial membranes

Ion exchange membranes (IEMs) are widely used in water treatment applications such as electrodialysis. However, the exploration of IEMs as effective antibacterial food contact materials (e.g., food packaging membranes) against pathogenic bacteria to ensure food safety has not been reported. Here, we report a simple but effective method to prepare high performance antibacterial membranes via ion exchange coupled with in-situ reduction. The general membrane properties are characterized using SEM, EDS, FTIR, XPS, XRD, DSC, TGA, water uptake, etc. The distribution of silver and copper in the membranes are generally in line with the distribution of sulfur, indicating that the antibacterial ions are introduced into the membranes via ion exchange and are bonded with the sulfonate groups in the membranes. The antibacterial performance is investigated using zone of inhibition tests and continuous bacteria growth inhibition tests. All of the prepared membranes show obvious antibacterial activities compared to the bare cation exchange membranes. The diameters of inhibition zone against Staphylococcus aureus (S. aureus) are all larger than those of Escherichia coli (E. coli), indicating that the prepared membranes are more efficient in inhibiting S. aureus compared to E. coli. Furthermore, the silver-based membrane shows more sustainable antibacterial activities compared to the copper-based membrane. Especially, the results clearly reveal that the silver-based membrane is capable of killing bacteria instead of just inhibiting the growth of bacteria. We have shown for the first time that membranes derived from IEMs have the potential as food contact materials to inhibit the growth of pathogenic bacteria so as to eliminate the risk of bacterial infections and meanwhile delay food spoilage due to bacteria growth.

Lignocellulose Nanofibre Obtained from Agricultural Wastes of Tomato, Pepper and Eggplants Improves the Performance of Films of Polyvinyl Alcohol (PVA) for Food Packaging

Films formulated with polyvinyl alcohol (PVA) (synthetic biopolymer) were reinforced with lignocellulose nanofibres (LCNF) from residues of vegetable production (natural biopolymer). The LCNF were obtained by mechanical and chemical pre-treatment by 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) and added to the polyvinyl alcohol (polymer matrix) with the aim of improving the properties of the film for use in food packaging. The mechanical properties, crystallinity, thermal resistance, chemical structure, antioxidant activity, water barrier properties and optical properties (transparency and UV barrier), were evaluated. In general, with the addition of LCNF, an improvement in the studied properties of the films was observed. In terms of mechanical properties, the films reinforced with 7% LCNF TEMPO showed the best results for tensile strength, Young’s modulus and elongation at break. At the same LCNF proportion, the thermal stability (T_max) increased between 5.5% and 10.8%, and the antioxidant activity increased between 90.9% and 191.8%, depending on the raw material and the pre-treatment used to obtain the different LCNF. Finally, a large increase in UV blocking was also observed with the addition of 7% LCNF. In particular, the films with 7% of eggplant LCNF showed higher performance for Young’s modulus, elongation at break, thermal stability and UV barrier. Overall, results demonstrated that the use of LCNF generated from agricultural residues represents a suitable bioeconomy approach able to enhance film properties for its application in the development of more sustainable and eco-friendly food packaging systems.

Physical, Mechanical, and Water Vapor Barrier Properties of Starch/Cellulose Nanofiber/Thymol Bionanocomposite Films

The application of starch films, such as food packaging materials, has been restricted due to poor mechanical and barrier properties. However, the addition of a reinforcing agent, cellulose nanofibers (CNF) and also thymol, into the films, may improve the properties of films. This work investigates the effects of incorporating different concentrations of thymol (3, 5, 7, and 10 wt.%) on physical, mechanical, water vapor barrier, and antibacterial properties of corn starch films, containing 1.5 wt.% CNF produced using the solvent casting method. The addition of thymol does not significantly affect the color and opacity of the films. It is found that the tensile strength and Young’s modulus of the films decreases from 10.6 to 6.3 MPa and from 436.9 to 209.8 MPa, respectively, and the elongation at break increased from 110.6% to 123.5% with the incorporation of 10 wt.% thymol into the films. Furthermore, the addition of thymol at higher concentrations (7 and 10 wt.%) improved the water vapor barrier of the films by approximately 60.0%, from 4.98 × 10^—9 to 2.01 × 10^—9 g/d.m.Pa. Starch/CNF/thymol bionanocomposite films are also found to exhibit antibacterial activity against Escherichia coli. In conclusion, the produced starch/CNF/thymol bionanocomposite films have the potential to be used as antibacterial food packaging materials.

Microfibrillated cellulose reinforced starch/polyvinyl alcohol antimicrobial active films with controlled release behavior of cinnamaldehyde

The starch/polyvinyl alcohol (ST/PVA) films incorporated with cinnamaldehyde (CIN) and microfibrillated cellulose (MFC) were developed. The effect of MFC content on the films' properties was studied. The SEM results showed that MFC promoted compatibility among starch, PVA and CIN. With increased content of MFC, the strength of the films was improved and their flexibility reduced, the films' crystallinity degree and hydrophobicity were improved. The oxygen and water vapor permeability of the films both reduced first and then increased as a whole. The release of CIN from films into the food stimulant (10% ethanol) could be controlled by MFC. When MFC content was between 1% and 7.5%, it decelerated the release of CIN but high MFC content exceeded 10% promoted the release of CIN. It revealed that films containing CIN could inhibit growth of S. putrefaciens. It showed a good prospect of using MFC to develop controlled release active ST/PVA films.