Physical modification on the in vitro digestibility of Tartary buckwheat starch: Repeated retrogradation under isothermal and non-isothermal conditions

Structural analysis of type 3 resistant starch from Canna edulis during in vitro simulated digestion and its post-digested residue impact on human gut microbiota

Introduction

Resistant starch (RS) has garnered attention for its health benefits, including modulating the gut microbiota and promoting the production of short-chain fatty acids (SCFAs).

Methods

This study investigates structural changes of type 3 resistant starch from Canna edulis (CE) during in vitro simulated digestion and explores its health-relevant properties using healthy individuals' fecal microbiota.

Results

CE, prepared with a RS content of 59.38%, underwent a comprehensive analysis employing X-ray diffraction (XRD), fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). During simulated digestion, XRD analysis demonstrated a significant rise in CE's relative crystallinity from 38.92 to 49.34%. SEM illustrated the transition of CE from a smooth to a rough surface, a notable morphological shift. Post-digestion, CE was introduced into microbial fermentation. Notably, propionic acid and valeric acid levels significantly increased compared to the control group. Furthere more, beneficial Bifidobacterium proliferated while pathogenic Escherichia-Shigella was suppressed. When comparing CE to the well-known functional food fructo-oligosaccharide (FOS), CE showed a specific ability to support the growth of Bifidobacterium and stimulate the production of short-chain fatty acids (SCFAs) without causing lactic acid accumulation.

Discussion

CE demonstrates potential as a functional health food, with implications for gut health enhancement and SCFAs production.

Preparation of starch-palmitic acid complexes by three different starches: A comparative study using the method of heating treatment and autoclaving treatment

Recent research emphasizes the growing importance of starch-lipid complexes due to their anti-digestibility ability, prompting a need to explore the impact of different starch sources and preparation methods on their properties. In this study, starch-palmitic acid (PA) complexes were prepared by three different starches including Tartary buckwheat starch (TBS), potato starch (PTS), and pea starch (PS) by heating treatment (HT) and autoclaving treatment (AT), respectively, and their physicochemical property and in vitro digestibility were systematically compared. The formation of the starch-PA complex was confirmed through various characterization techniques, including scanning electron microscopy, differential scanning calorimetry, Fourier transform infrared spectroscopy, and X-ray diffraction. Among the complexes, the PTS-PA complex exhibited the highest complexation index over 80 %, while the PS-PA complex had the lowest rapid digestible starch content (56.49-59.42 %). Additionally, the complexes prepared by AT exhibited higher resistant starch content (41.95-32.46 %) than those prepared by HT (31.42-32.49 %), while the complexes prepared by HT held better freeze-thaw stability and hydration ability than those prepared by AT. This study highlights the important role of starch sources in the physicochemical and digestibility properties of starch-lipid complex and the potential application of AT in the preparation of novel resistant starch.

Effect of different heat-moisture treatment times on the structure, physicochemical properties and in vitro digestibility of japonica starch

Modified starch was prepared from japonica starch (JS) by heat-moisture treatments (HMT). Under the same moisture content and HMT temperature, the effects of various HMT times on the structural, properties of JS and its in vitro digestibility properties were investigated. The results showed that adhesion occurred between the particles of japonica starch after the HMT, and there were depressions on the surface. The size of the JS particles increased, the short-range ordering and relative crystallinity of the HMT-modified starch increased and gradually decreased, reaching a peak of 36.51 % at 6 h, as the HMT time was extended. The pasting indexes of HMT-modified starch decreased and then increased with the increase of the HMT time; compared with JS, the thermal stability of HMT-modified starch increased while the pasting enthalpy decreased. All the HMT-modified starches were weakly gelatinous systems and pseudoplastic fluids. Following HMT, the amount of resistant starch (RS) and slowly digested starch (SDS) grew initially before declining. The amount of RS in HMT-modified starch peaked at 24.28 % when the HMT time was 6 h. The results of this research can serve as a theoretical foundation for the creation of modified japonica starch and its use in the food industry.

Evaluation of dual modification by high hydrostatic pressure and annealing on the physicochemical properties of bean starch

This study investigated the physical modifications by high hydrostatic pressure (HHP) at 600 MPa for 30 min/30 °C, annealing (AN) at 50 °C/24 h and the combination of both (HHP + AN and AN + HHP) applied to yellow bean starch to verify changes in morphology, X-ray diffraction, molecular order, thermal properties and pasting properties of native (NS) and modified starches. Morphological analysis showed loss of sphericity and increase in diameter with the appearance of pores on the surface after application of treatments. The AN starch showed lower values of syneresis, degree of double helix (DD), order (DO), and viscosity of the paste obtained by RVA. It exhibited a Vh-type classification with the appearance of the amylose-lipid complex. However, the gelatinization temperatures, as well as the enthalpy of gelatinization, were significantly higher. On the other hand, the starch treated with HHP showed a higher Setback (SB) value. The greatest modifications were found for the starches subjected to the combined treatments (AN + HHP) and (HHP + AN), where the order of the treatments was significant for the morpho-structural changes of yellow bean starch. According to the micrographs, the surface aspect was altered, with AN + HHP showing greater irregularities and flat yet irregular faces, as well as a larger granule diameter (147.05). The X-ray diffractogram showed a reduction in crystallinity from 28.14 % (NS) to 18.09 % (AN + HHP) and classified the starch as type "A". The double modification (HHP + AN and AN + HHP) reduced the gelatinization temperature and the enthalpy of gelatinization but had no effect on the bands of the FT-IR spectrum. There was only a reduction in the degree of order and the double helix. Finally, the treatment with AN + HHP is more effective as the gelatinization with AN facilitates the application of HHP. Both methods used are classified as physical (thermal and non-thermal), aiming to minimize environmental impacts and achieve faster and safer morpho-structural modification without leaving chemical residues in the products.

Characterization of Various Noncovalent Polyphenol-Starch Complexes and Their Prebiotic Activities during In Vitro Digestion and Fermentation

This study explores the structural characterization of six noncovalent polyphenol-starch complexes and their prebiotic activities during in vitro digestion and fermentation. Ferulic acid, caffeic acid, gallic acid, isoquercetin, astragalin, and hyperin were complexed with sweet potato starch (SPS). The polyphenols exhibited high binding capacity (>70%) with SPS. A partial release of flavonoids from the complexes was observed via in vitro digestion, while the phenolic acids remained tightly bound. Molecular dynamics (MD) simulation revealed that polyphenols altered the spatial configuration of polysaccharides and intramolecular hydrogen bonds formed. Additionally, polyphenol-SPS complexes exerted inhibitory effects on starch digestion compared to gelatinized SPS, owing to the increase in resistant starch fraction. It revealed that the different complexes stimulated the growth of Lactobacillus rhamnosus and Bifidobacterium bifidum, while inhibiting the growth of Escherichia coli. Moreover, in vitro fermentation experiments revealed that complexes were utilized by the gut microbiota, resulting in the production of short-chain fatty acids and a decrease in pH. In addition, the polyphenol-SPS complexes altered the composition of gut microbiota by promoting the growth of beneficial bacteria and decreasing pathogenic bacteria. Polyphenol-SPS complexes exhibit great potential for use as a prebiotic and exert dual beneficial effects on gut microbiota.

Effect of microwave followed by cooling on structural and digestive properties of pinhão starch

To increase its resistant content, native pinhão starch was modified using a microwave (300 W, 90 s) and subsequently cooled at 4 °C for 4, 8, 16, 24, and 72 h. The results demonstrated that all starches exhibited a crystalline structure of type C, with decreased crystallinity after modification. In the modified samples, the ratio of peaks 1047/1022 cm-1 and 995/1022 cm-1, as identified by FTIR, indicated a reduction in the crystalline region and damage to the double helix structure of starch granules. DSC analysis revealed that modified starches had lower gelatinization temperature range values due to the presence of more homogeneous crystals. Rheological analyses showed that starch suspensions obtained exhibited pseudoplastic fluid behavior and gel-like viscoelastic structure formation, with higher storage moduli in samples with longer cooling times. The microwave-modified starch, cooled for 72 h, exhibited higher digestion resistance, resulting in a 43.6 % increase in resistant starch content and a 26.1 % decrease in rapidly digestible starch compared to native starch. The results highlight that the modification of native pinhão starch using a microwave, followed by cooling at 4 °C for 72 h, presents a promising method for increasing the resistant starch content.

Red rice starch modification - Combination of the non-thermal method with a pulsed electric field (PEF) and enzymatic method using α-amylase

The objective of this study was to investigate the dual modification of red rice starch using pulsed electric field (PEF) and α-amylase, focusing on morpho-structural, thermal, and viscoamylographic properties. Native starch (Control) underwent various treatments: PEF at 30 kV cm-1 (PEF30), α-amylase at 9.0 U mg-1 (AA0), and a combination of both (PEF30 + α and α + PEF30). The PEF30 + α treatment exhibited the highest degree of digestion (10.66 %) and resulted in morphological changes in the starch granules, which became elongated and curved, with an increased average diameter of 50.49 μm compared to the control. The starch was classified as type A, with a maximum reduction in crystallinity of up to 21.17 % for PEF30. The deconvolution of FT-IR bands indicated an increase in the double helix degree (DDH) for PEF30 and AA0, while the degree of order (DO) was reduced for PEF30, AA0, and PEF30 + α. DSC analysis revealed significant modifications in gelatinization temperatures, particularly for PEF30, and these changes were supported by a reduction in gelatinization enthalpy (ΔH) of up to 28.05 % for AA0. These findings indicate that both individual and combined treatments promote a decrease in starch gelatinization and facilitate the process, requiring less energy. Differences were observed between the formulations subjected to single and alternating dual treatments, highlighting the influence of the order of PEF application on the structural characteristics of starch, especially when applied before the enzymatic treatment (PEF + α). Regarding the viscoamylographic parameters, it was observed that AA0 presented higher values than the control, indicating that α-amylase enhances the firmness of the paste. The double modification with PEF + α was more effective in reducing syneresis and starch retrogradation, leading to improvements in paste properties. This study provided significant insights into the modification of red rice starch using an efficient and environmentally friendly approach.

Phenolic acids, lignans, and low-molecular-weight phenolics exhibit the highest in vitro cellular bioavailability in different digested and faecal-fermented phenolics-rich plant extracts

Polyphenols are multifaceted bioactive compounds, but little is known about their real impact on human health after consumption. In this work, the phenolic profiling of quebracho, yellow maize, and violet rice extracts was comprehensively investigated, together with the impact of in vitro digestion and colonic fermentation on the bioaccessibility and bioavailability of these phytochemicals. The different matrices showed distinct profiles, potentially influencing in vitro starch digestion under cooking conditions. Furthermore, after the extracts underwent in vitro gastrointestinal digestion and faecal fermentation, phenolics exhibited a differential bioaccessibility trend at every digestion level, with matrix-dependent behaviour. The bioavailability results suggest that polyphenols are metabolised during colonic fermentation, mainly into tyrosols, phenolic acids, and lignans, which are partially absorbed by Caco-2 cells. By combining metabolomics with in vitro cellular methods, this research provides new insights into the fate of these phytochemicals in the gut, yielding comprehensive data on their consumption in food matrices.

Microstructural, physicochemical properties and starch digestibility of brown rice flour treated with extrusion and heat moisture

Effects of heat moisture treatment (HMT), extrusion treatment (ET), and the combination treatment (HMT-ET) on microstructural, physicochemical properties, and starch digestibility of brown rice flour (BRF) were investigated. With a rise in resistant starch (RS), melting temperature, and a decrease in swelling capacity (SC), peak viscosity, and apparent amylose content (AAC), the HMT-ET BRF showed a significant lower expected glycemic index (eGI) than HMT and ET. XRD and FTIR results showed ET, HMT-ET caused the transition of starch crystals from amorphous to crystalline region, suggesting the formation of the starch-lipid complex. The analysis of DSC and RVA proved HMT-ET flours induced starch gelatinization and inhibited the starch retrogradation of BRF compared with the other three flours. Correlation analysis suggested that the combined effect of HMT and ET was response for the changes in physicochemical properties and reduction of in vitro starch digestibility. Overall, the BRF after HMT-ET with improved physicochemical properties and starch digestibility could be better utilized as a good substitute for carbohydrate sources.

Tartary Buckwheat Starch Modified with Octenyl Succinic Anhydride for Stabilization of Pickering Nanoemulsions

In this study, Tartary buckwheat starch was modified to different degrees of substitution (DS) with octenyl succinate anhydride (OS-TBS) in order to explore its potential for stabilizing Pickering nanoemulsions. OS-TBS was prepared by reacting Tartary buckwheat starch with 3, 5 or 7% (w/v) octenyl succinate in an alkaline aqueous solution at pH 8.5. Fourier-transform infrared spectroscopy gave peaks at 1726 cm−1 (C=O) and 1573 cm−1 (RCOO−), indicating the formation of OS-TBS. We further studied the physicochemical properties of the modified starch as well as its emulsification capacity. As the DS with octenyl succinate anhydride increased, the amylose content and gelatinization temperature of the OS-TBS decreased, while its solubility increased. In contrast to the original Tartary buckwheat starch, OS-TBS showed higher surface hydrophobicity, and its particles were more uniform in size and its emulsification stability was better. Higher DS with octenyl succinate led to better emulsification. OS-TBS efficiently stabilized O/W Pickering nanoemulsions and the average particle size of the emulsion was maintained at 300–400 nm for nanodroplets. Taken together, these results suggest that OS-TBS might serve as an excellent stabilizer for nanoscale Pickering emulsions. This study may suggest and expand the use of Tartary buckwheat starch in nanoscale Pickering emulsions in various industrial processes.

Mechanism of effect of endogenous/exogenous rice protein and its hydrolysates on rice starch digestibility

The role of endogenous/exogenous rice protein and its hydrolysates in the enzymatic hydrolysis resistance of rice starch was investigated. Scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM) and Fourier transform infrared spectroscopy (FTIR) results showed that different types of rice endogenous proteins retarded the digestion of rice starch by the same way. Exogenous addition of protein hydrolysates was more effective than protein for impeding starch digestion. FTIR results indicated that rice protein hydrolysates were bound to starch granules through hydrogen bonds, and their interaction strengthened the ordered structure of the starch. Further, the intensity of the starch V- type peak was enhanced after the addition of protein hydrolysates, indicating that some peptides or free amino acids released by the protein formed complexes with the starch, thereby contributing to high slowly-digestible starch content. These findings provide a theoretical basis for the preparation of low glycemic index starch-based foods.