Chitosan based macromolecular probes for the selective detection and removal of Fe3+ ion

Fabrication of chitosan-based fluorescent hydrogel membranes cross-linked with bisbenzaldehyde for efficient selective detection and adsorption of Fe2

Chitosan, as a natural biomass material, is green, recyclable, sustainable and well biocompatible. The molecular chain is rich in active groups such as amino and hydroxyl groups, and its preparation of fluorescent probes has the advantages of biocompatibility and efficient detection performance. In this study, a bis(benzaldehyde) (BHD) fluorescent functional molecule was designed. Then a series of fluorescent chitosan-based hydrogel films (CSBHD) were prepared using chitosan as raw material and BHD as cross-linking agent. As a fluorescent probe for metal ions, CSBHD was able to efficiently detect Fe2+ with a linear correlation of fluorescence intensity in the range of 0-160 μM, and the limit of detection (LOD) was 0.55 μM. Moreover, it has excellent adsorption performance for Fe2+ ions, with a maximum adsorption capacity of 223.5 g/mg at 500 mg/L Fe2+ concentration. Finally, we characterised the structure and microscopic morphology of CSBHD films and found that CSBHD as a hydrogel film has a high cross-linking density, good water resistance, excellent thermal stability, strong resistance to swelling, and excellent stability in cycling tests. Hence, it has great potential for application in adsorption and detection of Fe2+ ions. It also provides a good strategy for the application of chitosan based fluorescent probe materials in environmental monitoring and heavy metal ion adsorption.

Two-Photon Nanoparticle Probe for Formaldehyde Detection via the AILE Luminescence Mechanism

A two-photon nanoparticle probe was designed and developed based on the principle of intermolecular interaction of the aggregation-induced locally excited emission luminescence mechanism. The probe has the advantages of simple synthesis, convenient use, strong atomic economy, good biocompatibility, and photobleaching resistance. It can produce a specific and sensitive response to formaldehyde, help detect FA in normal cells and cancer cells, and is expected to become a specific detection probe for FA in vitro and in vivo.

Medicinal and chemosensing applications of chitosan based material: A review

Chitosan (CTS), has emerged as a highly intriguing biopolymer with widespread applications, drawing significant attention in various fields ranging from medicinal to chemosensing. Key characteristics of chitosan include solubility, biocompatibility, biodegradability and reactivity, making it versatile in numerous sectors. Several derivatives have been documented for their diverse therapeutic properties, such as antibacterial, antifungal, anti-diabetic, anti-inflammatory, anticancer and antioxidant activities. Furthermore, these compounds serve as highly sensitive and selective chemosensor for the detection of various analytes such as heavy metal ions, anions and various other species in agricultural, environmental and biological matrixes. CTS derivatives interacting with these species and give analytical signals. In this review, we embark on an exploration of the latest advancements in CTS-based materials, emphasizing their noteworthy contributions to medicinal chemistry spanning the years from 2021 to 2023. The intrinsic biological and physiological properties of CTS make it an ideal platform for designing materials that interact seamlessly with biological systems. The review also explores the utilization of chitosan-based materials for the development of colorimetric and fluorimetric chemosensors capable of detecting metal ions, anions and various other species, contributing to advancements in environmental monitoring, healthcare diagnostics, and industrial processes.

Thienopyrimidine-derived multifunctional fluorescence sensor for the detection of Cu2+, Fe3+, and PPi in different solvents

Hydrazine substituted thienopyrimidine, a new fluorophore, was used to synthesize a novel Schiff base R1 as a chemosensor via the condensation with p-formyltriphenylamine, and the structure was confirmed using nuclear magnetic resonance spectroscopy (NMR) and mass spectrometry (MS) analysis. When treated with Cu2+ in dimethylsulfoxide (DMSO)/H2O buffer, R1 showed a phenomenon of fluorescence quenching, which was reversible with the action of ethylenediaminetetraacetic acid (EDTA). When treated with Fe3+ in dimethylformamide (DMF)/H2O buffer, R1 exhibited the same phenomenon, but fluorescence was recovered with inorganic pyrophosphate (PPi) quantitatively. The complexation ratios for R1-Cu2+ and R1-Fe3+ were both 1:2, which were manifested by MS titrations and corresponding Job's plots. The limits of detection of R1 for Cu2+ and Fe3+ were 3.11 × 10-8 and 1.24 × 10-7 M, respectively. The sensing mechanism of R1 toward Cu2+ and Fe3+ was confirmed using density functional theory calculations and electrostatic potential analysis. Test strips of R1 were fabricated successfully for on-site detection of Cu2+ and Fe3+. In addition, R1 was applied to recognize Cu2+ and Fe3+ in actual water samples with satisfactory recovery.

Chitosan-based fluorescent probe for the detection of Fe3+ in real water and food samples

Iron ions play a crucial role in the environment and the human body. Therefore, developing an effective detection method is crucial. In this paper, we report CNS2, a chitosan-based fluorescent probe utilizing naphthalimide as a fluorophore. CNS2 is designed to "quench" its own yellow fluorescence through the specific binding of compounds containing enol structures to Fe3+. Studying the fluorescence lifetime of CNS2 in the presence or absence of Fe3+ reveals that the quenching mechanism is static. The presence of multiple recognition sites on the chitosan chain bound to Fe3+ gave CNS2 rapid recognition (1 min) and high sensitivity, with a detection limit as low as 0.211 μM. Moreover, the recognition of Fe3+ by CNS2 had a good specificity and was not affected by interferences. More importantly, in this study, CNS2 was successfully utilised to prepare fluorescent composite membranes and to detect Fe3+ in real water samples and a variety of food samples. The results show that the complex sample environment still does not affect the recognition of Fe3+ by CNS2. All the above experiments obtained more satisfactory results, which provide strong support for the detection of Fe3+ by the probe CNS2 in practical applications.

Fabrication of nanofibrous membranes decorated with metal-organic frameworks for detection of pollutants in water

The environmental pollution caused by antibiotics, Fe3+ and MnO4- pollutants is becoming increasingly serious. Polyacrylonitrile (PAN) and polymethyl methacrylate (PMMA) were used and decorated with metal-organic frameworks (MOFs) to fabricated three kinds of nanofibrous membranes (NFMs) with different shapes and sizes were prepared by electrospinning technology using in situ growth method and mixed spinning method. The structures and properties of the above three kinds of NFMs were characterized. Among them, PAN@Co/Mn-MOF-74 NFM prepared by in-situ growth method based on PAN was a kind of nano-fluorescent NFM sensor with uniform structure and good fluorescence performance. It showed unique specificity and excellent sensitivity in the detection of ORN, Fe3+ and MnO4-. Compared with previously reported functionalized MOFs, PAN@Co/Mn-MOF-74 NFM has a lower limit of detection (LOD). This study provides a feasible technical route for the preparation of nano-fluorescent NFMs and the targeted detection of trace metal ions and antibiotics.

Construction of a novel chitosan-based macromolecular nanoprobe for specific fluorescent detection of H2S in live animals

H2S is one of the signal molecules in live organisms and a poisonous gas, which is closely related to our life. The traditional synthetic small molecular organic probes often have the disadvantages of low biocompatibility. In this paper, a fluorescent nanoprobe for detecting H2S in live organisms was constructed based on chitosan. The structure of CH-CN was characterized by infrared spectroscopy, nuclear magnetic resonance, x-ray photoelectron spectroscopy (XPS), XRD and scanning electron microscope (SEM). In the presence of Na2S, the fluorescence intensity at 560 nm was significantly enhanced, and showed high selectivity and sensitivity toward H2S. Based on the good fluorescence response of CH-CN, the probe was also successfully applied to H2S imaging in HepG2 cells and zebrafish. These experimental results indicate that the probe has lower cytotoxicity and excellent stability. The present research shows a typical example of construction of chitosan-based macromolecular fluorescent materials and their bio-imaging application.

Iron Control in Liquid Effluents: Pseudo-Emulsion Based Hollow Fiber Membrane with Strip Dispersion Technology with Pseudo-Protic Ionic Liquid (RNH3+HSO4-) as Mobile Carrier

The transport of iron(III) from aqueous solutions through pseudo-emulsion-based hollow fiber with strip dispersion (PEHFSD) was investigated using a microporous hydrophobic hollow fiber membrane module. The pseudo-protic ionic liquid RNH3HSO4- dissolved in Solvesso 100 was used as the carrier phase. This pseudo-protic ionic liquid was generated by the reaction of the primary amine Primene JMT (RNH2) with sulphuric acid. The aqueous feed phase (3000 cm3) containing iron(III) was passed through the tube side of the fiber, and the pseudo-emulsion phase of the carrier phase (400 cm3) and sulphuric acid (400 cm3) were circulated through the shell side in counter-current operational mode, using a single hollow fiber module for non-dispersive extraction and stripping. In the operation, the stripping solution (sulphuric acid) was dispersed into the organic membrane phase in a tank with a mixing arrangement (a four-blade impeller stirrer) designed to provide strip dispersion. This dispersed phase was continuously circulated from the tank to the membrane module in order to provide a constant supply of the organic solution to the fiber pores. Different hydrodynamic and chemical parameters, such as feed (75-400 cm3/min) and pseudo-emulsion phases (50-100 cm3/min) flows, sulphuric acid concentration in the feed and stripping phases (0.01-0.5 M and 0.5-3 M, respectively), metal concentration (0.01-1 g/L) in the feed phase, and PPILL concentration (0.027-0.81 M) in the carrier phase, were investigated. From the experimental data, different diffusional parameters were estimated, concluding that the resistance due to the feed phase was not the rate-controlling step of the overall iron(III) transport process. It was possible to concentrate iron(III) in the strip phase using this smart PEHFSD technology.

Water-soluble chitosan-g-PMAm (PMAA)-Bodipy probes prepared by RAFT methods for the detection of Fe3+ ion

It is a challenge to achieve the fully water-soluble chitosan. In this work, water-soluble chitosan-based probes were obtained by the following steps: boron-dipyrrolemethene (BODIPY)-OH was synthesized, and then BODIPY-OH was halogenated to BODIPY-Br. Afterwards, BODIPY-Br reacted with carbon disulfide and mercaptopropionic acid to obtain BODIPY-disulfide. BODIPY-disulfide was introduced to chitosan via amidation reaction to obtain fluorescent chitosan-thioester (CS-CTA); it is employed as the macro-initiator. Methacrylamide (MAm) was grafted onto chitosan fluorescent thioester through reversible addition-fragmentation chain transfer (RAFT) polymerization method. Thus, a water-soluble macromolecular probe (CS-g-PMAm) with chitosan as the main chain and PMAm as long-branched chains was obtained. It greatly improved the solubility in pure water. The thermal stability was reduced slightly, and the stickiness was greatly reduced and the samples displayed the characteristics of liquid. CS-g-PMAm could detect Fe³⁺ in pure water. By the same method, CS-g-PMAA (CS-g-Polymethylacrylic acid) was synthesized and investigated as well.

The study of a novel high selectivity pyrenyl-based fluorescence probe with aggregation-induced emission characteristics for Fe3+ detection designed by a structure modulation strategy

The past decades have witnessed the feat of fluorescent probes for Fe³⁺ detection, where eliminating the interference by other metal ions plays a pivotal role in its detection by probes in complex environments. Herein, by taking advantage of the substituent effects, the electron-withdrawing group (EWG) -CF₃ and electron-donating group (EDG) -CH₃ were introduced to 2-(1-pyrenyl)pyridine (pypyr) to prepare two turn-off fluorescence probes, 5-trifluoromethyl-2-(1-pyrenyl)pyridine (pypyr-CF3) and 5-methyl-2-(1-pyrenyl)pyridine (pypyr-CH3). Intriguingly, both probes displayed novel aggregation-induced emission (AIE) characteristics in MeCN/H₂O mixtures and the size and morphology of the aggregated particles were studied via DLS and TEM. By the modulation strategy, pypyr-CF3 can detect Fe³⁺ in the presence of 29 different metal ions without interference. Comparatively, pypyr-CH3 experienced serious interference from other metal ions such as Hg²⁺ and Zr⁴⁺. Besides, pypyr-CF3 not only demonstrated a higher photoluminescence quantum yield (PLQY) of 65.25% and wider pH adaptability but is also capable of Fe³⁺ detection over a wide pH range of 2-11 with a short response time (5 seconds). A plausible quenching mechanism based on the inner filter effect has also been demonstrated. More importantly, the versatile applications of pypyr-CF3, such as the quantitative analysis of Fe³⁺ in actual water samples, anti-forgery ink, fingerprint identification, etc., further corroborate its superb capabilities. This study aims to lend concrete support to the design and selectivity modulation of probes.

Facile method to synthesize fluorescent chitosan hydrogels for selective detection and adsorption of Hg2+/Hg. Carbohydr Polym 2022;288:119417. [PMID: 35450660 DOI: 10.1016/j.carbpol.2022.119417]

Fluorescent chitosan-based hydrogel for the selective detection and adsorption of Hg²⁺/Hg⁺ in aqueous environment was prepared through three-step synthesis strategy. NO₂-Boron-dipyrrolemethene (BODIPY) was prepared firstly, and then the -NO₂ group was reduced to -NH₂ group. Finally, the NH₂-BODIPY was introduced to chitosan by Schiff base formation reaction through bi-aldehyde. Eventually, fluorescent chitosan hydrogel was obtained. The as-prepared fluorescent hydrogel probe could detect Hg²⁺/Hg⁺ through PET mechanism with the detection limit of 0.3 μM. The recognition site which combines Hg²⁺/Hg⁺ is CN, it is just formed in the reaction with chitosan and the amino group on BODIPY. Adsorption capacity of the fluorescent hydrogel is 121 mg·g^-1, which is almost seven times of the original chitosan. The isotherm and kinetics of Hg²⁺/Hg⁺ removal follows Langmuir isotherm and pseudo-second order kinetics, respectively. Besides, a series of fluorescent hydrogels were prepared to compare the elasticity, hydropHilicity, fluorescence intensity and adsorption capacity.

Chitosan crosslinking with a vanillin isomer toward self-healing hydrogels with antifungal activity

The purpose of the study was to develop new antimicrobial hydrogels from natural resources that may promote wound healing and prevent bacterial skin infection. The new hydrogels were synthesized by crosslinking chitosan with a vanillin isomer, 5-methoxysalicylaldehyde, by a friendly and easy method. To characterize these hydrogels, their structural and morphological properties were explored by FTIR, ¹H NMR, SEM, POM, and TGA. In view of the targeted application, swelling behavior, biodegradability, antimicrobial activity and biocompatibility were investigated in vitro. Structural and morphological studies confirmed the formation of new hydrogels via the imination reaction concomitant with the supramolecular organization. The hydrogels were highly porous with the average pore diameter around 80 μm, and a swelling rate controlled by the crosslinking density and medium pH. The hydrogels showed a progressive weight loss in the presence of lysozyme up to 35%, during 21 days of testing. They proved non-cytotoxic effect on Normal Human Dermal Fibroblasts using MTS test and powerful antifungal activity against Candida Albicans, as determined by disk diffusion assay. All these properties indicate the new hydrogels as a promising option for the treatment of various skin lesions.

Fluorescent cellulose nanocrystals based on AIE luminogen for rapid detection of Fe3+ in aqueous solutions

Previously, we found that aggregation-induced emission (AIE) luminogen tetraphenylethylene (TPE) based fluorescent cellulose nanocrystals (TPE-CNCs) showed excellent AIE-active fluorescence properties and high selectivity and sensitivity for detecting nitrophenol explosives in aqueous solutions. Here, we further develop the application of TPE-CNCs for fluorescence detection of Fe³⁺ in aqueous solutions. The fluorescence of TPE-CNC aqueous suspensions is rapidly quenched (response time less than 10 s) due to the electron-transfer process between TPE and Fe³⁺ upon addition of Fe³⁺. TPE-CNCs have high sensitivity and selectivity toward Fe³⁺ over a broad pH range from 4 to 10. The limit of detection is determined to be 264 nM, which is below the World Health Organization (WHO) recommendations (5.36 μM) for Fe³⁺. Given the superior properties of TPE-CNCs, it has huge potential to be applied as a rapid and visual evaluation tool for drinking water quality. Collectively, we explore and develop fluorescent cellulose nanocrystals for multi-functional applications and TPE-CNCs can be used for practical applications in sensing, sewage treatment and bioimaging.

AIE-active fluorescent cellulose nanocrystals (TPE-CNCs) is developed as a high selectivity and sensitivity fluorescent probe for rapid detection of Fe³⁺ in aqueous solutions.

Preparation and application of chitosan-based fluorescent probes

Biomass materials have abundant natural resources, renewability and good biochemical compatibility, so biomass-based fluorescent materials prepared from biomass materials have gradually become a research hotspot.

Fluorescent Chitosan Modified with Heterocyclic Aromatic Dyes

Chitosan is a valuable, functional, and biodegradable polysaccharide that can be modified to expand its applications. This work aimed to obtain chitosan derivatives with fluorescent properties. Three heterocyclic aromatic dyes (based on benzimidazole, benzoxazole, and benzothiazole) were synthesized and used for the chemical modification of chitosan. Emission spectroscopy revealed the strong fluorescent properties of the obtained chitosan derivatives even at a low N-substitution degree of the dye. The effect of high-energy ultraviolet radiation (UV–C) on modified chitosan samples was studied in solution with UV–Vis spectroscopy and in the solid state with FTIR spectroscopy. Moreover, cytotoxicity towards three different cell types was evaluated to estimate the possibilities of biomedical applications of such fluorescent chitosan-based materials. It was found that the three new derivatives of chitosan were characterized by good resistance to UV–C, which suggests the possibility of using these materials in medicine and various industrial sectors.