The Fe3O4@apple seed starch core-shell structure decorated In(III): A green biocatalyst for the one-pot multicomponent synthesis of pyrazole-fused isocoumarins derivatives under solvent-free conditions

Insight into efficient photocatalytic degradation of norfloxacin over a simple, economical biochar-based magnetic photocatalyst under solar illumination: a statistical and experimental approach

The transformation of residual agricultural solid waste into an efficient value-added carbon product has been an ongoing strategy for solid waste management and a sustainable economy. Meanwhile, the upsurgence of antibiotic contamination in water bodies due to their inadvertent use poses a serious threat to human health and leads to antimicrobial resistance. Hence, to neutralize two evils in one stroke simultaneously, a simple, easy, and cost-effective pea shell-based magnetic photocatalyst (PSMC) has been synthesized and characterized by XRD (X-ray diffraction), VSM (vibrating sample magnetometer), XPS (X-ray photoelectron spectroscopy), TGA (thermogravimetric analysis), and FTIR (Fourier-transform infrared) spectroscopy techniques. Batch experimental studies revealed that PSMC efficiently eliminates norfloxacin (91.3%) within 180 min from wastewater and mineralizes it into innocuous products at optimum parameters of norfloxacin concentration of 20 mg/L, catalyst dosage of 15 mg, and pH 3.5. Additionally, statistical parameters for the photodegradation of NX obtained from ANOVA by applying the Box-Behnken design are in close agreement with batch experiment parameters. PSMC has surplus advantages of facile recovery for recycling up to seven consecutive cycles by an external magnet and efficacy in natural solar light, making it cost-effective and economical. Radical scavenging studies revealed that O2•- and OH• were the potent reactive species in the photocatalytic degradation process.

Melamine phosphate-modified magnetic chitosan: a novel biocompatible catalyst for the synthesis of biological tetrahydrodipyrazolopyridine and pyrazolopyranopyrimidine derivatives

A novel biocompatible composite was fabricated by the functionalization of magnetic chitosan with the melamine phosphate (MP) ionic compound to serve as a recoverable and bifunctional catalyst, aiming at the diversity-oriented generation of biological tetrahydropyrazolopyridine and pyrazolopyrimidine derivatives. This involved a meticulously orchestrated reaction, exploiting the in situ generated pyrazole alongside aromatic aldehydes, ammonium acetate, and (thio) barbituric acid. The present work manifests outstanding advantages, offering a novel and great method for the optimal synthesis of two valuable heterocyclic series especially five new derivatives. The resulting novel biocompatible composite was comprehensively characterized through a range of analytical techniques, including FT-IR, NH3 and CO2-TPD, XRD, TEM, FE-SEM, VSM, EDX, elemental CHNS analysis, ICP-MS, and NMR spectroscopy. Notably, the study represents a critical step in the preparation of advanced materials from accessible and cost-effective precursors.

The untold story of starch as a catalyst for organic reactions

Starch is one of the members of the polysaccharide family. This biopolymer has shown many potential applications in different fields such as catalytic reactions, water treatment, packaging, and food industries. In recent years, using starch as a catalyst has attracted much attention. From a catalytic point of view, starch can be used in organic chemistry reactions as a catalyst or catalyst support. Reports show that as a catalyst, simple starch can promote many heterocyclic compound reactions. On the other hand, functionalized starch is not only capable of advancing the synthesis of heterocycles but also is a good candidate catalyst for other reactions including oxidation and coupling reactions. This review tries to provide a fair survey of published organic reactions which include using starch as a catalyst or a part of the main catalyst. Therefore, the other types of starch applications are not the subject of this review.

Trimesic acid-modified magnetic gum as a highly efficient and recyclable biocatalyst for the one-pot green synthesis of condensation reactions

In this work, a novel and efficient magnetic biocatalyst was designed, prepared and identified using cherry tree gum as a biopolymer functionalized with 1,3,5-benzenetricarboxylic acid (gum@Fe₃O₄@BTA). The obtained biocatalyst was prepared using available and cheap materials in an easy process. This biocatalyst was used as an efficient catalyst with high catalytic activity for the synthesis of a three-component one-pot protocol and four-component one-pot protocol of tetrahydro-4H-chromene derivatives and polyhydroquinoline derivatives in EtOH green solvent under reflux conditions, respectively. The synthesized heterogeneous biocatalysts were identified and analyzed by FT-IR, EDS, FESEM, TGA and XRD techniques. The synthesis of tetrahydro-4H-chromene and polyhydroquinoline derivatives by using this biocatalyst has advantages such as high efficiency, short reaction time, simple work method, absence of dangerous solvents, environmentally friendly conditions, easy separation of the biocatalyst by an external magnet, and the ability reuse for five periods without significant decrease in catalytic activity.

3D printing of polylactic acid: recent advances and opportunities

Bio-based polymers are a class of polymers made by living organisms, a few of them known and commercialized yet. Due to poor mechanical strength and economic constraints, they have not yet seen the extensive application. Instead, they have been an appropriate candidate for biological applications. Growing consumer knowledge of the environmental effect of polymers generated from petrochemical sources and a worldwide transition away from plastics with a lifespan of hundreds of years has resulted in greater interest in such hitherto unattainable sectors. Bio-based polymers come in various forms, including direct or "drop-in" replacements for their petrochemical counterparts with nearly identical properties or completely novel polymers that were previously unavailable, such as polylactide. Few of these bio-based polymers offer significantly improved technical specifications than their alternatives. Polylactic acid (PLA) has been well known in the last decade as a biodegradable thermoplastic source for use in 3DP by the "fused deposition modeling" method. The PLA market is anticipated to accomplish 5.2 billion US dollars in 2020 for its industrial usage. Conversely, 3DP is one of the emerging technologies with immense economic potential in numerous sectors where PLA is one of the critical options as the polymer source due to its environmentally friendly nature, glossiness, multicolor appearance, and ease of printing. The chemical structure, manufacturing techniques, standard features, and current market situation of PLA were examined in this study. This review looks at the process of 3DP that uses PLA filaments in extrusion-based 3DP technologies in particular. Several recent articles describing 3D-printed PLA items have been highlighted.

Ti3C2Tx MXene@MOF decorated polyvinylidene fluoride membrane for the remediation of heavy metals ions and desalination

Nowadays, the evolution of two-dimensional materials like transition metal carbides (MXene) prepares a novel path to surpass the "trade-off" between the membrane permeation and rejection rates. Based on water swelling and oxidation vulnerability, MXene membranes showed vivid defects such as inadequate stability, detrimental adsorption, and haphazardly stacked nanosheets. Here, we prepared Ti3C2Tx MXene@metal-organic frameworks nanosheets from aminated metal-organic framework-101 (NH2-MIL-101(Al)) via the in-situ growth method and incorporated them into the thin-film polymer to acquire desirable MXene nanosheets with tailor-made structures. The earned modified thin-film nanocomposite membrane showed high salt rejection for Na2SO4 (98.6 ± 0.5%), MgSO4 (96.9 ± 0.7%), MgCl2 (84.5 ± 0.8%), and NaCl (82.5 ± 0.8%), and also showed an improved permeation rate by three times (17.1 ± 0.2 L m-2. h-1. bar-1). Concurrently, the rejection rate of five different types of heavy metal ions (Ni2+, Cd2+, Mn2+, Cu2+, and Zn2+) was tested and denoted more than a 95.2 ± 0.5% rejection rate for all of them, notably high for Mn2+ (97.6 ± 0.4%). After modification, the flux recovery rate was as high as 95.3 ± 0.4%, denoting more than 30% improvement; besides, anti-compactness features enhanced by nearly 34 ± 0.7%. The long-term water permeation kept 91.5 ± 0.9% of its initial rate indicating almost 40 ± 0.8% enhancement. In addition, the rejection performance of Na2SO4 for the optimized membrane was more than 97% even after two weeks.

Recent advances in aqueous virus removal technologies

The COVID-19 outbreak has triggered a massive research, but still urgent detection and treatment of this virus seems a public concern. The spread of viruses in aqueous environments underlined efficient virus treatment processes as a hot challenge. This review critically and comprehensively enables identifying and classifying advanced biochemical, membrane-based and disinfection processes for effective treatment of virus-contaminated water and wastewater. Understanding the functions of individual and combined/multi-stage processes in terms of manufacturing and economical parameters makes this contribution a different story from available review papers. Moreover, this review discusses challenges of combining biochemical, membrane and disinfection processes for synergistic treatment of viruses in order to reduce the dissemination of waterborne diseases. Certainly, the combination technologies are proactive in minimizing and restraining the outbreaks of the virus. It emphasizes the importance of health authorities to confront the outbreaks of unknown viruses in the future.

MIL-125-based nanocarrier decorated with Palladium complex for targeted drug delivery

The aim of this work was to provide a novel approach to designing and synthesizing a nanocomposite with significant biocompatibility, biodegradability, and stability in biological microenvironments. Hence, the porous ultra-low-density materials, metal-organic frameworks (MOFs), have been considered and the MIL-125(Ti) has been chosen due to its distinctive characteristics such as great biocompatibility and good biodegradability immobilized on the surface of the reduced graphene oxide (rGO). Based on the results, the presence of transition metal complexes next to the drug not only can reinforce the stability of the drug on the structure by preparing π-π interaction between ligands and the drug but also can enhance the efficiency of the drug by preventing the spontaneous release. The effect of utilizing transition metal complex beside drug (Doxorubicin (DOX)) on the drug loading, drug release, and antibacterial activity of prepared nanocomposites on the P. aeruginosa and S. aureus as a model bacterium has been investigated and the results revealed that this theory leads to increasing about 200% in antibacterial activity. In addition, uptake, the release of the drug, and relative cell viabilities (in vitro and in vivo) of prepared nanomaterials and biomaterials have been discussed. Based on collected data, the median size of prepared nanocomposites was 156.2 nm, and their biological stability in PBS and DMEM + 10% FBS was screened and revealed that after 2.880 min, the nanocomposite's size reached 242.3 and 516 nm respectively. The MTT results demonstrated that immobilizing PdL beside DOX leads to an increase of more than 15% in the cell viability. It is noticeable that the AST:ALT result of prepared nanocomposite was under 1.5.

A novel core@double-shell three-layer structure with dendritic fibrous morphology based on Fe3O4@TEA@Ni-organic framework: a highly efficient magnetic catalyst in the microwave-assisted Sonogashira coupling reaction

In synthetic organic chemistry, the formation of carbon-carbon bonds is a significant and substantial reaction. As a result, developing a highly active magnetic heterogeneous catalyst with excellent performance is a very appealing technique for constructing C-C bonds in organic chemistry. The present study describes the fabrication of a novel and readily recoverable nickel-based metal-organic framework (MOF) for C-C bond formation through the Sonogashira coupling reaction. The efficient magnetic core-shell structure (Fe₃O₄@TEA@MOF) with a 3D dendritic fibrous morphology was successfully synthesized using a hydrothermal approach by immobilizing Ni-based MOF onto the Fe₃O₄@TEA core-shell structure. The fabrication of Fe₃O₄@TEA@MOF was confirmed by various analyses; Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray analysis (EDS), and elemental mapping confirmed the stepwise fabrication of catalyst. X-ray diffraction analysis (XRD) showed the crystalline nature of the catalyst. Field-emission scanning electron microscopy (FE-SEM) displayed the 3D dendritic fibrous morphology. Thermogravimetric analysis (TGA) and vibrating sample magnetometer analysis (VSM) showed the excellent thermal stability and magnetic properties of Fe₃O₄@TEA@MOF. The Brunauer-Emmett-Teller analysis (BET) found that the fabricated catalyst with a surface area of 36.2 m² g^-1, pore volume of 0.18 cm³ g^-1, and mean pore diameter of 20.38 nm belongs to mesoporous structures. In addition, the information from the inductively coupled plasma-optical emission spectroscopy (ICP-OES) about fresh and reused catalysts showed that the metal leaching amount is slight and about 1.98%. Other advantages of the Fe₃O₄@TEA@MOF catalyst can be mentioned as easily reusable for four runs and high performance (above 98%) in synthesizing diphenylacetylene from phenylacetylene, aryl halide, and cesium carbonate (as the base) under solvent-free and microwave conditions.

Sono and nano: A perfect synergy for eco-compatible Biginelli reaction

In this study, we evaluated the performance of nano-γ-Fe2O3–SO3H catalyst in the Biginelli reaction and synthesized 3,4-dihydropyrimidine-2-(1H)-ones. This reaction was carried out under solvent-free and ultrasonic irradiation conditions and belonged to one-pot multicomponent reactions (MCRs) with an adopted aromatic aldehyde, ethyl acetoacetate, and urea as starting materials for the beginning of the reaction. The synthesized materials were efficient in synthesizing 3,4-dihydropyrimidine-2-(1H)-ones via the Biginelli reaction under reaction conditions. Thus, the advantages of using nano-γ-Fe2O3–SO3H in the Biginelli reaction are short reaction time, high efficiency, green method, solvent free, and cost-effective. Furthermore, nano-γ-Fe2O3–SO3H as a heterogeneous catalyst can be recycled five times without significantly reducing catalytic activity.