Preparation and characterization of vanillin-chitosan Schiff base zinc complex for a novel Zn2+ sustained released system

Biocompatible hydrogels based on quaternary ammonium salts of chitosan with high antimicrobial activity as biocidal agents for disinfection

The paper reports new hydrogels based on quaternary ammonium salts of chitosan designed as biocidal products. The chitosan derivative was crosslinked with salicylaldehyde via reversible imine bonds and supramolecular self-assemble to give dynamic hydrogels which respond to environmental stimuli. The crosslinking mechanism was demonstrated by 1H NMR and FTIR spectroscopy, and X-ray diffraction and polarized light microscopy. The hydrogel nature, self-healing and thixotropy were proved by rheological investigation and visual observation, and their morphology was assessed by scanning electron microscopy. The relevant properties for application as biocidal products, such as swelling, dissolution, bioadhesiveness, antimicrobial activity and ex-vivo hemocompatibility and in vivo local toxicity and biocompatibility on experimental mice were measured and analyzed in relationship with the imination degree and the influence of each component. It was found that the hydrogels are superabsorbent, have good adhesivity to skin and various surfaces and antimicrobial activity against relevant gram-positive and gram-negative bacteria, while being hemocompatible and biocompatible. Besides, the hydrogels are easily biodegraded in soil. All these properties recommend the studied hydrogels as ecofriendly biocidal agents for living tissues and surfaces, but also open the perspectives of their use as platform for in vivo applications in tissue engineering, wound healing, or drug delivery systems.

Quercetin on the properties of rice bran oil body: Focused surface charge, oxidative stability and digestive properties

To further enhance the stability of rice bran oil body (RBOB) emulsions, this study examined the impact of various concentrations of quercetin (QU) on the microstructure, rheological properties, oxidative stability, and digestive properties of RBOB emulsions. The results indicated that by incorporating QU concentration, the particle size of RBOB emulsions could be significantly reduced to 300 nm; QU could improve the surface hydrophobicity, the emulsifying activity index and emulsification stability index of RBOB emulsions of 550, 0.078 m2/g and 50.78 min, respectively; the storage stability of RBOB emulsions was further improved; the higher concentration of QU could delay the oxidation of RBOB emulsions, among which, the 500 μmol/L concentration inhibited the strongest effect of oil oxidation. It also improved the thermal stability of RBOB emulsions. After gastrointestinal digestion, the free fatty acids release rate of RBOB emulsions with QU addition decreased to 14.68%, and RBOB emulsions were slowly hydrolyzed. Therefore, adding QU to RBOB helps to improve its stability and delay digestion.

Bioactive chitosan-citral Schiff base zinc complex: A pH-responsive platform for potential therapeutic applications

The application of CO2 supercritical fluid (SCF) technology has developed rapidly because of its non-toxic, environmentally friendly, mild reaction conditions and safety. The SCF technology can effectively speed up the reaction process of nano-material synthesis, and maintains a high degree of controllability and repeatability. This study mainly included carboxymethyl chitosan sodium salt (CCS), citral (CT), p-coumaric acid (CA), and ZnSO4 as raw materials to prepare CCS-CT-CA-Zn complex as a pH-responsive agent and was investigated using supercritical fluid technique. The coordination structure of Bridge-CCS-CT-CH3COO-CA-Zn-Schiff base/OH and the morphology of the complex agents were verified. The prepared CCS-CT-CA-Zn complex showed good dispersion and uniformity (mean size: 852 ± 202 nm, PdI: 0.301, and mean zeta potential: -31 ± 6 mV). Also, it has a good pH responsive release in an acid environment. Besides, both of CCS-CT-CA-Zn complex (DS-B) and its decomposed mixture in acid (DS-A) demonstrated significant antioxidant and anti-vibrio activity. Moreover, both DS-B complex and DS-A mixture inhibited biofilm formation, swimming, and swarming motilities of V. parahaemolyticus in a dose-dependent manner. This work will provide a scientific basis for the further design and development of natural products derived antibacterial-antioxidant complex agents, food additives and feed additives.

Synthesis and Characterization of Slow-Release Chitosan Oligosaccharide Pyridine Schiff Base Copper Complexes with Antifungal Activity

Herein, a series of chitosan oligosaccharide copper complexes modified with pyridine groups (CPSx-Cu complexes) were successfully prepared via the Schiff base reaction and ion complexation reaction for slow-release fungicide. The structures of the synthesized derivatives were characterized via Fourier transform infrared spectroscopy and 1H and 13C nuclear magnetic resonance spectroscopy, and the unit configuration of the complexes was calculated using Gaussian software. The slow-release performance experiment demonstrated that the cumulative copper ion release rate of CPSx-Cu complexes was dependent on the type of substituents on the pyridine ring. Furthermore, the in vitro and in vivo antifungal activities of the CPSx-Cu complexes were investigated. At a concentration of 0.4 mg/mL, CPSx-Cu complexes completely inhibited the growth of Pythium vexans and Phytophthora capsici. Results indicated that CPSx-Cu complexes with slow-release ability exhibited better antifungal activity than thiodiazole-copper and copper sulfate basic. This study confirmed that combining chitosan oligosaccharide with bioactive pyridine groups and copper ions is an effective approach to further developing slow-release copper fungicides, providing new possibilities for the application of copper fungicides in green agriculture. This study lays the foundation for further studies on biogreen copper fungicides.

Preparation of Self-Assembled, Curcumin-Loaded Nano-Micelles Using Quarternized Chitosan-Vanillin Imine (QCS-Vani Imine) Conjugate and Evaluation of Synergistic Anticancer Effect with Cisplatin

Nano-micelles are self-assembling colloidal dispersions applied to enhance the anticancer efficacy of chemotherapeutic agents. In this study, the conjugate of quarternized chitosan and vanillin imine (QCS-Vani imine) was synthesized using the reaction of a Schiff base characterized by proton-NMR (1HNMR), UV-Vis spectroscopy, and FT-IR. The critical micelle concentration (CMC), particle size, and zeta potential of the resulting product were determined. The QCS-Vani imine conjugate was used as a carrier for the development of curcumin-loaded nano-micelles, and their entrapment efficiency (%EE), drug-loading capacity (%LC) and in vitro release were investigated using HPLC analysis. Moreover, the nano-micelles containing curcumin were combined with various concentrations of cisplatin and evaluated for a possible anticancer synergistic effect. The anticancer activity was evaluated against lung cancer A549 and mouse fibroblast L929 cell lines. The percent yield (%) of the QCS-Vani imine conjugate was 93.18%. The curcumin-loaded QCS-Vani imine nano-micelles were characterized and found to have a spherical shape (by TEM) with size < 200 nm (by DLS) with high %EE up to 67.61% and %LC up to 6.15 ± 0.41%. The loaded lyophilized powder of the nano-micelles was more stable at 4 °C than at room temperature during 120 days of storage. pH-sensitive release properties were observed to have a higher curcumin release at pH 5.5 (cancer environment) than at pH 7.4 (systemic environment). Curcumin-loaded QCS-Vani imine nano-micelles showed higher cytotoxicity and selectivity toward lung cancer A549 cell lines and exhibited lower toxicity toward the normal cell (H9C2) than pure curcumin. Moreover, the curcumin-loaded QCS-Vani imine nano-micelles exhibited an enhanced property of inducing cell cycle arrest during the S-phase against A549 cells and showed prominently induced apoptosis in lung cancer cells compared to that with curcumin. The co-treatment of cisplatin with curcumin-loaded QCS-Vani imine nano-micelles presented an enhanced anticancer effect, showing 8.66 ± 0.88 μM as the IC50 value, in comparison to the treatment with cisplatin alone (14.22 ± 1.01 μM). These findings suggest that the developed QCS-Vani imine nano-micelle is a potential drug delivery system and could be a promising approach for treating lung cancer in combination with cisplatin.

Crosslinked modified chitosan biopolymer for enhanced removal of toxic Cr(VI) from aqueous solution

Two new crosslinked modified chitosan biopolymers, namely (CTS-VAN) and (Fe₃O₄@CTS-VAN) bioadsorbents were prepared starting from chitosan and 4-hydroxy-3-methoxybenzaldehyde (VAN) in presence of epichlorohydrin. The analytical techniques FT-IR, EDS, XRD, SEM and XPS besides BET surface analysis were utilized for full characterization of the bioadsorbents. Batch experiments were conducted to study the effect of various influencing parameters in Cr (VI) removal such as initial pH, contact time, adsorbent amount and initial Cr (VI) concentration. The adsorption of Cr (VI) was found out to be maximum at pH = 3 for both bioadsorbents. Langmuir isotherm fit well the adsorption process with a maximum adsorption capacity of 188.68 and 98.04 mg/g for CTS-VAN and Fe₃O₄@CTS-VAN, respectively. The adsorption process followed pseudo second-order kinetics with R² values of 1 and 0.9938 for CTS-VAN and Fe₃O₄@CTS-VAN, respectively. X-ray photoelectron spectroscopy (XPS) analysis showed that Cr(III) accounted for 83 % of the total Cr bound to bioadsorbents surface, which indicated reductive adsorption was responsible for Cr(VI) removal by the bioadsorbents. Cr(VI) was initially adsorbed on the positively charged surface of the bioadsorbents and reduced to Cr(III) by electrons provided by oxygen-comprising functional groups (e.g., CO), and consequently part of the converted Cr(III) stayed on the surface and the rest released into solution.

Characterization and antivibrio activity of chitosan-citral Schiff base calcium complex for a calcium citrate sustained release antibacterial agent

Vibrio parahemolyticus is the "Number one killer" of seafood products. Anti-vibrio agents having low cost and high-safety are urgently needed to supplement the application needs. This work attempted to prepare CS-CT-CCa complex with citral (CT), chitosan (CS) and calcium citrate (CCa) as raw material by microwave-assisted high-pressure homogenization. Additionally the coordination structure and morphology of Bridge-CS-CT-Schiff base/OH-CCa were verified. The prepared CS-CT-CCa had a well-dispersed property (the size: 3.55~9.33 μm and the zeta potential: +38.7~+67.5 mV) and an excellent sustained released ability (sustained release up to 180 min). MIC, Glucose assay, MDA assay, biofilm formation inhibition assay, SEM, swimming and swarming motility assay demonstrated that CS-CT-CCa had strong (MIC of 128 μg/ml) and sustained (more than 12 h) inhibitory effects against V. parahaemolyticus. Meanwhile, CS-CT-CCa could increase the membrane permeability of V. parahaemolyticus and inhibit their biofilm-forming ability in a dose-dependent manner. It could be inferred that the antibacterial activities against V. parahaemolyticus caused inhibition of biofilm formation, swimming and swarming motilities. This study provided necessary data for the further design and development of chitosan antibacterial agents, food and feed additives.

pH-sensitive gallol-rich chitosan hydrogel beads for on-off controlled drug delivery

Malignant tumors have emerged as a serious health issue, and the interest in developing pH-sensitive polymers for site-specific drug delivery has increased. The physical and/or chemical properties of pH-sensitive polymers depend on the pH, and thus, drugs can be released by cleaving dynamic covalent and/or noncovalent bonds. In this study, gallic acid (GA) was conjugated to chitosan (CS) to prepare self-crosslinked hydrogel beads containing Schiff base (imine bond) crosslinks. The CS-GA hydrogel beads were formed by the dropwise addition of the CS-GA conjugate solution into a Tris-HCl buffer solution (TBS, pH 8.5). The pH-sensitivity of pristine CS was significantly enhanced following the introduction of GA moiety, and as a result, the CS-GA hydrogel beads swelled more than approximately 5000 % at pH 4.0, indicating an excellent swelling/deswelling ability of the beads at different pH (pH 4.0 and 8.5). The reversible breakage/recovery of the imine crosslinks in the CS-GA hydrogel beads was confirmed through X-ray photoelectron spectroscopic and rheological studies. Finally, Rhodamine B was loaded onto the hydrogel beads as a model drug to investigate the pH-sensitive drug release behavior. At pH 4, the drug was released up to approximately 83 % within 12 h. The findings indicate that the CS-GA hydrogel beads have great potential as a drug delivery system that is sensitive to acidic tumor sites in the body.

New Zinc-Based Active Chitosan Films: Physicochemical Characterization, Antioxidant, and Antimicrobial Properties

The improvement of the antioxidant and antimicrobial activities of chitosan (CS) films can be realized by incorporating transition metal complexes as active components. In this context, bioactive films were prepared by embedding a newly synthesized acylpyrazolonate Zn(II) complex, [Zn(Q^PhtBu)₂(MeOH)₂], into the eco-friendly biopolymer CS matrix. Homogeneous, amorphous, flexible, and transparent CS@Zn_n films were obtained through the solvent casting method in dilute acidic solution, using different weight ratios of the Zn(II) complex to CS and characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR), Raman, and scanning electron microscopy (SEM) techniques. The X-ray single-crystal analysis of [Zn(Q^PhtBu)₂(MeOH)₂] and the evaluation of its intermolecular interactions with a protonated glucosamine fragment through hydrogen bond propensity (HBP) calculations are reported. The effects of the different contents of the [Zn(Q^PhtBu)₂(MeOH)₂] complex on the CS biological proprieties have been evaluated, proving that the new CS@Zn_n films show an improved antioxidant activity, tested according to the DPPH method, with respect to pure CS, related to the concentration of the incorporated Zn(II) complex. Finally, the CS@Zn_n films were tried out as antimicrobial agents, showing an increase in antimicrobial activity against Gram-positive bacteria (Staphylococcus aureus) with respect to pure CS, when detected by the agar disk-diffusion method.

Crystal structure of (E)-amino(2-(3-ethoxy-4-hydroxybenzylidene)hydrazineyl)methaniminium nitrate hemihydrate C10H16N5O5.5

C10H16N5O5.5, monoclinic, C2/c (no. 15), a = 17.7836(8) Å, b = 9.4796(4) Å, c = 15.8740(8) Å, β = 97.093(5)°, V = 2655.6(2) Å3, Z = 8, R gt (F) = 0.0469, wR ref (F 2) = 0.1289, T = 170 K.