Tunable microphase-regulated silk fibroin/poly (lactic acid) biocomposite materials generated from ionic liquids

Silk Protein-Based Nanoporous Microsphere for Controllable Drug Delivery through Self-Assembly in Ionic Liquid System

Ionic liquids (ILs) showed a promising application prospect in the field of biomedicine due to their unique recyclability, modifiability, and structure adjustability. In this study, nanoporous microsphere of silk protein and blending with poly(d,l-lactic acid) as model drug delivery was fabricated, respectively, through an IL-induced self-assembly method. Their morphology, structure, and thermal properties were comparably investigated through scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, differential scanning calorimetry, X-ray diffraction, and thermogravimetric analyses, and the interaction mechanisms were also discussed to elucidate the effect of structure on drug delivery kinetics. The pure protein exhibited a bigger nanopore size in the microsphere compared to the composite one, facilitating more effective drug loading up to 88.7%. However, drug release was over 53.5% for the composite during initial 4 h, while pure protein was only about half of the composite. Both of them exhibited sustained slow release after 24 h and anticancer efficacy. Furthermore, the favorable compatibility between drug and microsphere vehicle was found and experienced improved thermal stability upon encapsulation, which could protect the drug molecules in high temperature at 200 °C. When the protein and its composite self-assembled to microspheres in ILs due to electrostatic and hydrophobic interaction, the drug could be infiltrated into the nanoporous matrix through biophysical action, and the protein structure displayed reversible transition during delivery. The sustained slow release from pure SF was attributed to the high β-sheet block action and strong drug-protein interactions, whose strength could be tuned through blending poly(d,l-lactic acid) with protein. These findings indicated that the SF-based nanoporous microspheres formed from IL self-assembled system are an ideal and potential drug delivery vehicle which can be incorporated into various biomaterials in the future.

Electroactive nanofibrous membrane with temperature monitoring for wound healing

Developing functional dressings for promoting cellular activities and monitoring the healing progress is receiving increasingly widespread attention. In this study, Ag/Zn electrodes were deposited on the surface of a polylactic acid (PLA) nanofibrous membrane which can mimic the extracellular matrix. When wetted by wound exudate, the Ag/Zn electrodes could generate an electric stimulation (ES), promoting the migration of fibroblasts that heal wounds. Moreover, the Ag/Zn@PLA dressing showed excellent antibacterial activity against E. coli (95%) and S. aureus (97%). The study found that the electrostatic (ES) effect and the release of metal ions mainly contribute to the wound healing properties of Ag/Zn@PLA. In vivo mouse models demonstrated that Ag/Zn@PLA could promote wound healing by improving re-epithelialization, collagen deposition, and neovascularization. Additionally, the integrated sensor within the Ag/Zn@PLA dressing can monitor the wound site's temperature in real-time, providing timely information on wound inflammatory reactions. Overall, this work suggests that combining electroactive therapy and wound temperature monitoring may provide a new strategy for designing functional wound dressings.

Ultrasound-assisted air-jet spinning of silk fibroin-soy protein nanofiber composite biomaterials

Ultrasound utilizes a non-radiation technology that can meet modern standards to gain access to cheap, reliable and sustainable modern energy. Ultrasound technology can be implemented in the field of biomaterials for its exceptional potential in controlling the shape of nanomaterials. This study presents the first example of the production of soy and silk fibroin protein composite nanofibers in various ratios via combining ultrasonic technology with air-spray spinning. Characterization of ultrasonic spun nanofibers was performed by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric (TG) analysis, water contact angle, water retention, enzymatic degradation, and cytotoxicity assays. The effects that adjustments on the ultrasonic time have on the surface morphology, structures, thermal properties, hydrophilicity, water-uptake, bio-enzyme degradability, mechanical properties, and cytocompatibility of the material were examined. It was discovered that as the sonication time increased from 0 to 180 min, the beading phenomenon disappeared, forming nanofibers with uniform diameter and porosity; while the content of β-sheet crystals in the composites and their thermal stability gradually increased, the materials glass transition temperature decreased, and preferred mechanical properties were obtained. Additional studies show that the hydrophilicity, water retention capacity and enzymatic degradation rate were also enhanced by ultrasound, providing a favorable environment for cell attachment and proliferation. This study highlights the experimental and theoretical methods for ultrasound assisted air-jet spinning of biopolymer nanofibrous materials with tunable properties and high biocompatibility, which provide a wide range of applications in wound dressings and drug-carrying systems. This work shows great potential for a direct road to sustainable development of protein based fibers in the industry, thus promoting economic growth, and improving the health of the general population and well-being of wounded patients worldwide.

The Influence of Different Sustainable Silk-Based Fillers on the Thermal and Mechanical Properties of Polylactic Acid Composites

In this work, different silk fillers combined with maleinized corn oil (MCO), as environmentally friendly plasticizers, were used to modify the mechanical and thermal properties of polylactic acid (PLA) composites. Melt extrusion and injection were used to obtain samples with a content of 10 wt.% of MCO and 0.5 phr of different silk fillers: crushed silk (CS), silk fibroin microparticles (SFM), and silk fibroin nanoparticles (SFN). PLA formulation with 10 wt.% of MCO and 0.5 g of CS per hundred grams of composite (phr) showed the highest increase in mechanical ductile properties with an increase in elongation at break of approximately 1400%, compared with PLA. Differential scanning calorimetry (DSC) showed a decrease of 2 °C in their glass transition temperature with the addition of different silk fillers. In addition, SFM and SFN increase the degree of crystallinity of PLA. This increment was also confirmed by infrared spectroscopy analysis. Field emission scanning electron microscopy (FESEM) images revealed a good dispersion of the different silk fillers. Among them, PLA formulation with 10 wt.% MCO and 0.5 phr of SFN, showed an optimal balance between maximum resistance and elongation at break, with 52.0 MPa and 10.8%, respectively, improving elongation at break by 635%. Furthermore, all samples were satisfactorily disintegrated under composting conditions.

Recent Research Progress of Ionic Liquid Dissolving Silks for Biomedicine and Tissue Engineering Applications

Ionic liquids (ILs) show a bright application prospect in the field of biomedicine and energy materials due to their unique recyclable, modifiability, structure of cation and anion adjustability, as well as excellent physical and chemical properties. Dissolving silk fibroin (SF), from different species silkworm cocoons, with ILs is considered an effective new way to obtain biomaterials with highly enhanced/tailored properties, which can significantly overcome the shortcomings of traditional preparation methods, such as the cumbersome, time-consuming and the organic toxicity caused by manufacture. In this paper, the basic structure and properties of SF and the preparation methods of traditional regenerated SF solution are first introduced. Then, the dissolving mechanism and main influencing factors of ILs for SF are expounded, and the fabrication methods, material structure and properties of SF blending with natural biological protein, inorganic matter, synthetic polymer, carbon nanotube and graphene oxide in the ILs solution system are introduced. Additionally, our work summarizes the biomedicine and tissue engineering applications of silk-based materials dissolved through various ILs. Finally, according to the deficiency of ILs for dissolving SF at a high melting point and expensive cost, their further study and future development trend are prospected.

Ultrasound-assisted fabrication of biopolymer materials: A review

There is an urgent need to develop technologies that can physically manipulate the structure of biocompatible and green polymer materials in order to tune their performance in an efficient, repeatable, easy-to-operate, chemical-free, non-contact, and highly controllable manner. Ultrasound technology produces a cavitation effect that promotes the generation of free radicals, the fracture of chemical chain segments and a rapid change of morphology. The cavitation effects are accompanied by thermal, chemical, and biological effects that interact with the material being studied. With its high efficiency, cleanliness, and reusability applications, ultrasound has a vast range of opportunity within the field of natural polymer-based materials. This work expounds the basic principle of ultrasonic cavitation and analyzes the influence that ultrasonic strength, temperature, frequency and induced liquid surface tension on the physical and chemical properties of biopolymer materials. The mechanism and the influence that ultrasonic modification has on materials is discussed, with highlighted details on the agglomeration, degradation, morphology, structure, and the mechanical properties of these novel materials from naturally derived polymers.