A novel multifunctional Salecan/κ-carrageenan composite hydrogel with anti-freezing properties: Advanced rheology, thermal analysis and model fitting

Low drug load, high retention mometasone furoate cream with polyglyceryl - 3 oleate as a chemical enhancer: Formulation development, in vivo and in vitro evaluation and molecular mechanisms

The study aimed to create a low loading, high retention, easier to apply O/W mometasone furoate (MF) cream using a chemical enhancer (CE) approach to provide more options for patients with atopic dermatitis (AD) and to investigate molecular mechanisms of its increased release and retention. A Box-Behnken design determined the optimal formulation based on stability and in vitro skin retention. Evaluations included appearance, rheological properties, irritation, in vivo tissue distribution and pharmacodynamics. Molecular mechanisms of enhanced release were studied using high-speed centrifugation, molecular dynamics and rheology. The interaction between the CE, MF and skin was studied by tape stripping, CLSM, ATR-FTIR and SAXS. The formulation was optimized to contain 0.05% MF and used 10% polyglyceryl-3 oleate (POCC) as the CE. There was no significant difference from Elocon® cream in in vivo retention and pharmacodynamics but increased in vivo retention by 3.14-fold and in vitro release by 1.77-fold compared to the basic formulation. POCC reduced oil phase cohesive energy density, enhancing drug mobility and release. It disrupted skin lipid phases, aiding drug entry and formed hydrogen bonds, prolonging retention. This study highlights POCC as a CE in the cream, offering insights for semi-solid formulation development.

Unveiling the rheological and thermal behavior of a novel Salecan and whey protein isolate composite gel

The burgeoning interest in the versatile hydrogel matrix, with its multifarious applications, has spurred extensive research in recent years. However, the implementation of chemically crosslinked gels on a large-scale has been hindered by their poor biosafety and excessive energy consumption. To address these challenges, this study focuses on harnessing physical methods to engineer novel composite hydrogels utilizing natural polysaccharides Salecan and whey protein isolate, obviating the need for structural modification or chemical crosslinking. The aim was to explore the rheological properties to understand their multiple behaviors. Various models, including Power-Law, Herschel-Bulkley, and Arrhenius, were also employed to compare and analyze rheological parameters. This study holds significance as it is the pioneering report on the hydrogels fabricated from Salecan/Whey protein isolate. These gels possess favorable attributes encompassing optimized elasticity, thermal-stability, enhanced injectability, and self-recovery, rendering them suitable for a multitude of applications in the realms of food and biomedicine.

Injectable plant-derived polysaccharide hydrogels with intrinsic antioxidant bioactivity accelerate wound healing by promoting epithelialization and angiogenesis

Skin wound healing is a complex and dynamic process involving hemostasis, inflammatory response, cell proliferation and migration, and angiogenesis. Currently used wound dressings remain unsatisfactory in the clinic due to the lack of adjustable mechanical property for injection operation and bioactivity for accelerating wound healing. In this work, an "all-sugar" hydrogel dressing is developed based on dynamic borate bonding network between the hydroxyl groups of okra polysaccharide (OP) and xyloglucan (XG). Benefiting from the reversible crosslinking network, the resulting composite XG/OP hydrogels exhibited good shear-thinning and fast self-healing properties, which is suitable to be injected at wound beds and filled into irregular injured site. Besides, the proposed XG/OP hydrogels showed efficient antioxidant capacity by scavenging DPPH activity of 73.9 %. In vivo experiments demonstrated that XG/OP hydrogels performed hemostasis and accelerated wound healing with reduced inflammation, enhanced collagen deposition and angiogenesis. This plant-derived dynamic hydrogel offers a facile and effective approach for wound management and has great potential for clinical translation in feature.

Coagulation of Hydrophobic Ionic Associates of Cetyltrimethylammonium Bromide and Carrageenan

In aqueous solutions, cetyltrimethylammonium cations bind to carrageenan polyanions, and the resulting ionic associates form macroscopic aggregates due to hydrophobic interaction. At certain ratios of cetyltrimethylammonium to carrageenan, the resulting colloidal particles auto-flocculate. According to visual observations, the ratio ranges from 1 to 3 mmol/g; otherwise the suspensions are stable. By measuring the sedimentation rate and particle size distribution, the most extensive flocculation was found to be from 1.7 to 2.3 mmol/g. The ratio corresponding to the fastest auto-flocculation was precisely determined by titrating the reagents with small increments and recording the turbidity. The turbidimetric titration plots contain distinct break points corresponding to the most extensive flocculation. These break points occur at the same ratio of carrageenan to cetyltrimethylammonium over a wide range of reagent concentrations. The precise values of the critical ratio were found to be 1.78 and 1.53 mmol/g, respectively, during the titration of cetyltrimethylammonium with carrageenan and vice versa. The number of anionic sulfate groups in carrageenan was measured by ICP OES and found to be 1.35 mmol/g. This value is consistent with the critical ratio of the auto-flocculation.

Strengthening the Key Features of Volumizing Fillers: Projection Capacity and Long-Term Persistence

Volumizing fillers aim to create or restore facial volume in fat layers. To provide strong tissue lifting and long-term persistence, gels are generally designed with stiff properties, characterized by a high storage modulus (G'). However, clinical evidence shows a discrepancy between high G' and good lifting capacities, especially after skin tension has been exerted on the gel. To better explore the in vivo behavior of a gel, we first evaluated the elastic moduli of five commercial volumizers (RHA4, JUVVOL, RESVOL, RESLYFT, and BELVOL) in dynamic compression mode, E'. We further developed a Projection Index score based on the rheological assessment of creep in compression to mimic skin tension-induced stress relaxation (flattening). Finally, the ability of a gel to resist enzymatic degradation was analyzed with a multidose approach. Despite similar clinical indications, volumizers exhibited distinct behaviors. RHA4 and BELVOL showed the highest E' values (resistance to strain), RHA4, JUVVOL, and RESVOL exhibited the greatest projection capacities, while JUVVOL and RHA4 offered the largest persistence to enzymatic degradation. In this article, we introduce the use of the Projection Index to efficiently assess the ability of a gel to lift tissues, thus increasing preclinical models' efficiency and reducing the need for animal studies.

Environmentally adaptive polysaccharide-based hydrogels and their applications in extreme conditions: A review

Polysaccharide hydrogels are one of the most promising hydrogel materials due to their inherent characteristics, including biocompatibility, biodegradability, renewability, and easy modification, and their structure and functional designs have been widely researched to adapt to different application scenarios as well as to broaden their application fields. As typical wet-soft materials, the high water content and water-absorbing ability of polysaccharide-based hydrogels (PHs) are conducive to their wide biomedical applications, such as wound healing, tissue repair, and drug delivery. In addition, along with technological progress, PHs have shown potential application prospects in some high-tech fields, including human-computer interaction, intelligent driving, smart dressing, flexible sensors, etc. However, in practical applications, due to the poor ability of PHs to resist freezing below zero, dehydration at high temperature, and acid-base/swelling-induced deformation in a solution environment, they are prone to lose their wet-soft peculiarities, including structural integrity, injectability, flexibility, transparency, conductivity and other inherent characteristics, which greatly limit their high-tech applications. Hence, reducing their freezing point, enhancing their high-temperature dehydration resistance, and improving their extreme solution tolerance are powerful approaches to endow PHs with multienvironmental adaptability, broadening their application areas. This report systematically reviews the study advances of environmentally adaptive polysaccharide-based hydrogels (EAPHs), comprising anti-icing hydrogels, high temperature/dehydration resistant hydrogels, and acid/base/swelling deformation resistant hydrogels in recent years. First, the construction methods of EAPHs are presented, and the mechanisms and properties of freeze-resistant, high temperature/dehydration-resistant, and acid/base/swelling deformation-resistant adaptations are simply demonstrated. Meanwhile, the features of different strategies to prepare EAPHs as well as the strategies of simultaneously attaining multienvironmental adaptability are reviewed. Then, the applications of extreme EAPHs are summarized, and some meaningful works are well introduced. Finally, the issues and future outlooks of PH environment adaptation research are elucidated.

Exploring the Rheological and Structural Characteristics of Novel Pectin-Salecan Gels

The hydrogels based on natural polysaccharide offers high hydrophilicity and excellent biocompatibility while exhibiting soft physical properties related to texture and tissues, making them ideal candidates for food and biomedical applications. Herein, a new gel system composed of pectin and salecan (PS) was designed and prepared, and its structural and functional characteristics were further explored by scanning electron microscopy and rheological testing. Data fitting based on Herschel–Bulkley (HB) and Power-Law models enable in-depth comparisons and elucidations of the PS gels’ flow behavior. The cyclic strain time scanning test gave an interesting maximum strain recovery rate of about 70%; meanwhile, the creep data reported an adjustable creep compliance of 0.0146 to 0.1802. The comprehensive analysis of the structure and rheological exploration of the novel pectin-salecan hydrogels demonstrated their potential advantages over pectin and broader applicability in different food or biomedical fields.

Silymarin nanocrystals-laden chondroitin sulphate-based thermoreversible hydrogels; A promising approach for bioavailability enhancement

Hydrogels has gained tremendous interest as a controlled release drug delivery. However, currently it is a big challenge to attain high drug-loading as well as stable and sustained release of hydrophobic drugs. The poor aqueous solubility and low bioavailability of many drugs have driven the need for research in new formulations. This manuscript hypothesized that incorporation of nanocrystals of hydrophobic drug, such as silymarin into thermoreversible hydrogel could be a solution to these problems. Herein, we prepared nanocrystals of silymarin by antisolvent precipitation technique and characterized for morphology, particle size, polydispersity index (PDI) and zeta potential. Moreover, physical cross-linking of hydrogel formulations based on chondroitin sulphate (CS), kappa-Carrageenan (κ-Cr) and Pluronic® F127 was confirmed by Fourier transformed infrared spectroscopy (FT-IR). The hydrogel gelation time and temperature of optimized hydrogel was 14 ± 3.2 s and 34 ± 0.6 °C, respectively. The release data revealed controlled release of silymarin up to 48 h and in-vivo pharmacokinetic profiling was done in rabbits and further analyzed by high-performance liquid chromatography (HPLC). It is believed that the nanocrystals loaded thermoreversible injectable hydrogel system fabricated in this study provides high drug loading as well as controlled and stable release of hydrophobic drug for extended period.

Stabilization and Dispersion of OSA Starch-Coated Titania Nanoparticles in Kappa-Carrageenan-Based Solution

Titania is a white pigment used widely in papermaking, paints and cosmetic industries. Dispersion and stabilization of high concentration titania in water-based system remains a great bottleneck in industry nowadays, because aggregation of titania nanoparticles results in severe adverse effects to gloss, opacity, tint strength, color distribution and storage stability of end products. Because kappa-carrageenan (κ-CG) has excellent rheological properties such as emulsification, gelation, stability and so on, it has the ability to form gel and increase the viscosity of aqueous solution. In this work, Octenyl succinic anhydride (OSA) starch was utilized as wall material to encapsulate titania pigments using electrostatic spray drying processing. Transmission electron microscopy (TEM) showed that titania pigments were coated by OSA starch, with a final form of nanoparticle. Accelerating stability test found that around 60% OSA starch–titania particles were stably dispersed in κ-CG-based solution. All materials used in this work were natural ingredient, which would be preferred by cosmetic industry and consumers. The technique used in the present study could potentially be extended to other pigments for similar purpose.