Evaluation of the antimicrobial and anti-biofilm activity of novel salicylhydrazido chitosan derivatives impregnated with titanium dioxide nanoparticles

Synthesis, characterization and evaluation of in vitro potential antimicrobial efficiency of new chitosan hydrogels and their CuO nanocomposites

The phenomenon of microbial resistance and its resulting biofilms to traditional antibiotics is worsening over time. Therefore, the discovery of alternative substances that inhibit microbial activities through mechanisms different from those of known antibiotics requires attention. So, chitosan was crosslinked using different amounts of oxalyl dihydrazide yielding four novel hydrogels; ODHCs-I, ODHCs-II, ODHCs-III, and ODHCs-IV of crosslinking degree 12.17, 20.67, 31.67, and 43.17, respectively. Different amounts of CuO nanoparticles were impregnated into ODHCs-IV, obtaining ODHCs-IV/CuONPs-1 %, ODHCs-IV/CuONPs-3 % and ODHCs-IV/CuONPs-5 % composites. Their structure was emphasized using FTIR, SEM, XRD, TEM, EDX and elemental analysis. Their in vitro antimicrobial and anti-biofilm activities improved with increasing ODH and CuONPs content. ODHCs-IV exhibited minimal inhibition concentration (2 μg/mL) against S. pyogenes that was much lower than Vancomycin (3.9 μg/mL). ODHCs-IV/CuONPs-5 % displayed better inhibition performance than Vancomycin and Amphotericin B against Gram-positive-bacteria and fungi, respectively, and comparable one to that of Vancomycin against Gram-negative-bacteria. ODHCs-IV/CuONPs-5 % displayed much lower minimal biofilm inhibition concentrations (1.95 to 3.9 μg/mL) as compared with those of ODHCs-IV (7.81 and 15.63 μg/mL), against C. albicans, S. pyogenes, and K. pneumonia. ODHCs-IV/CuONPs-5 % composite is safe on normal human cells. Oxalyl dihydrazide and CuONPs amalgamated into chitosan in one formulation promoted its antimicrobial efficiency.

Nanoformulations for dismantling fungal biofilms: The latest arsenals of antifungal therapy

Globally, fungal infections have evolved as a strenuous challenge for clinicians, particularly in patients with compromised immunity in intensive care units. Fungal co-infection in Covid-19 patients has made the situation more formidable for healthcare practitioners. Surface adhered fungal population known as biofilm often develop at the diseased site to elicit antifungal tolerance and recalcitrant traits. Thus, an innovative strategy is required to impede/eradicate developed biofilm and avoid the formation of new colonies. The development of nanocomposite-based antibiofilm solutions is the most appropriate way to withstand and dismantle biofilm structures. Nanocomposites can be utilized as a drug delivery medium and for fabrication of anti-biofilm surfaces capable to resist fungal colonization. In this context, the present review comprehensively described different forms of nanocomposites and mode of their action against fungal biofilms. Amongst various nanocomposites, efficacy of metal/organic nanoparticles and nanofibers are particularly emphasized to highlight their role in the pursuit of antibiofilm strategies. Further, the inevitable concern of nanotoxicology has also been introduced and discussed with the exigent need of addressing it while developing nano-based therapies. Further, a list of FDA-approved nano-based antifungal formulations for therapeutic usage available to date has been described. Collectively, the review highlights the potential, scope, and future of nanocomposite-based antibiofilm therapeutics to address the fungal biofilm management issue.

Recent Applications of Chitosan and Its Derivatives in Antibacterial, Anticancer, Wound Healing, and Tissue Engineering Fields

Chitosan, a versatile biopolymer derived from chitin, has garnered significant attention in various biomedical applications due to its unique properties, such as biocompatibility, biodegradability, and mucoadhesiveness. This review provides an overview of the diverse applications of chitosan and its derivatives in the antibacterial, anticancer, wound healing, and tissue engineering fields. In antibacterial applications, chitosan exhibits potent antimicrobial properties by disrupting microbial membranes and DNA, making it a promising natural preservative and agent against bacterial infections. Its role in cancer therapy involves the development of chitosan-based nanocarriers for targeted drug delivery, enhancing therapeutic efficacy while minimising side effects. Chitosan also plays a crucial role in wound healing by promoting cell proliferation, angiogenesis, and regulating inflammatory responses. Additionally, chitosan serves as a multifunctional scaffold in tissue engineering, facilitating the regeneration of diverse tissues such as cartilage, bone, and neural tissue by promoting cell adhesion and proliferation. The extensive range of applications for chitosan in pharmaceutical and biomedical sciences is not only highlighted by the comprehensive scope of this review, but it also establishes it as a fundamental component for forthcoming research in biomedicine.

Synthesis of new quaternized chitosan Schiff bases and their N-alkyl derivatives as antimicrobial and anti-biofilm retardants in membrane technology

New quaternized salicylidene chitosan Schiff bases (QSCSBs) and their N-octyl derivatives (OQCs) have been synthesized and characterized, aiming to develop innovative antimicrobial and anti-biofilm agents. This research holds immense potential, as these compounds could be utilized as anti-biofouling additives in membrane technology in the future. The synthesis involved the modification of low molecular-weight-chitosan (LMC) through simultaneous Schiff base formation and quaternization processes to create QSCSBs. Subsequently, QSCSBs were catalytically reduced to form quaternized N-benzyl chitosan (QBCs) intermediates, which then underwent nucleophilic substitution reactions affording N-octyl quaternized chitosans (OQCs). Characterization techniques such as elemental, spectral, and microscopic analyses were used to confirm the successful synthesis of these materials. As membrane technology relies on surface charge, QSCSBs and OQCs with large zeta potentials could be used as positively charged additives. Moreover, SEM image revealed the regular distribution of pores and voids across the additives' surfaces raises intriguing questions about their implications for membrane performance. Meanwhile, the superior antibacterial and antibiofilm potential of these materials, particularly QSCSB2 and OQC2, indicate that the utilization of these compounds as anti-biofouling additives in membrane technology could significantly improve the performance and longevity of membranes used in various applications such as water treatment and desalination.

Synthesis, antimicrobial activity, antioxidant activity and molecular docking of novel chitosan derivatives containing glycine Schiff bases as potential succinate dehydrogenase inhibitors

Succinate dehydrogenase (SDH) is an important inner mitochondrial membrane-bound enzyme involved in redox reactions during the tricarboxylic acid cycle. Therefore, a series of novel chitosan derivatives were designed and synthesized as potential microbicides targeting SDH and precisely characterized by FTIR, 1H NMR and SEM. Their antifungal and antibacterial activities were evaluated against Botrytis cinerea, Fusarium graminearum, Staphylococcus aureus and Escherichia coli. The bioassays revealed that these chitosan derivatives exerted significant antifungal effects, with four of the compounds achieving 100 % inhibition of Fusarium graminearum merely at a concentration of 0.5 mg/mL. Additionally, CSGDCH showed 79.34 % inhibition of Botrytis cinerea at a concentration of 0.1 mg/mL. In vitro antibacterial tests revealed that CSGDCH and CSGDBH have excellent Staphylococcus aureus and Escherichia coli inhibition with MICs of 0.0156 mg/mL and 0.03125 mg/mL, respectively. Molecular docking studies have been carried out to explore the binding energy and binding mode of chitosan and chitosan derivatives with SDH. The analyses indicated that chitosan derivatives targeted the active site of the SDH protein more precisely, disrupting its normal function and ultimately repressing the growth of microbial cells. Furthermore, the chitosan derivatives were also evaluated biologically for antioxidation, and all of these compounds had a greater degree of reducing power, superoxide radical, hydroxyl radical and DPPH-radical scavenging activity than chitosan. This research has the potential for the development of agricultural antimicrobial agents.

Green Biocatalyst for Ultrasound-Assisted Thiazole Derivatives: Synthesis, Antibacterial Evaluation, and Docking Analysis

The catalytic activity of chitosan (Cs) and grafted Cs led to the preparation of terephthalohydrazide Cs Schiff's base hydrogel (TCsSB), which was then investigated as an eco-friendly biocatalyst for synthesizing novel thiazole derivatives. TCsSB exhibited greater surface area and higher thermal stability compared to Cs, making it a promising eco-friendly biocatalyst. We synthesized two novel series of thiazoles via the reaction of 2-(2-oxo-1,2-diphenylethylidene) hydrazine-1-carbothioamide with various hydrazonoyl chlorides and 2-bromo-1-arylethan-1-ones, employing ultrasonic irradiation and using TCsSB as a catalyst. A comparative study between Cs and TCsSB revealed higher yields than TCsSB. The methodology offered advantages such as mild reaction conditions, quick reaction times, and high yields. TCsSB could be reused multiple times without a significant loss of potency. The chemical structures of the newly synthesized compounds were verified through IR, 1H NMR, 13C NMR, and MS analyses. Six synthesized compounds were assessed for their in vitro antibacterial effectiveness by establishing the minimum inhibitory concentration against four distinct bacterial strains. The docking analyses revealed favorable binding scores against several amino acids within the selected protein (PDB Code-1MBT) for these compounds, with compound 4c exhibiting particularly noteworthy binding properties. Additionally, the in silico ADME parameter estimation for all compounds indicated favorable pharmacological properties for these compounds.

Water-soluble chitosan salt as ecofriendly corrosion inhibitor for N80 pipeline steel in artificial sea water: Experimental and theoretical approach

Chitosan, as a proficient biopolymer, has enormous potential as an ecofriendly corrosion inhibitor (CI), but their limited solubility restricts practical applications. Herein, an eco-friendly and water-soluble chitosan salt (CS) was utilized as a green CI on N80 pipeline steel in artificial sea water. Several structural and surface analytical tools were engaged in describing the characteristics of novel CS polymer. The corrosion inhibition efficiencies of CS on steel at different concentrations were investigated through gravimetric, conventional and advanced electrochemical techniques along with the surface analyses. Tafel polarization tests specified that CS performed as mixed-type CI with prevalent anodic inhibition characteristics. At a concentration of 1000 ppm, CS provided an inhibition efficiency (IE) of 96.68 %, following physiochemical adsorptions of CS on N80 surface validated by fitting Langmuir adsorption isotherm. However, the reductions in the values of IE at high temperature specified that the CS is the temperature dependent CIs. Scanning electrochemical microscopic evaluation confirmed the formation of thin CS inhibitors films with high electrochemical stability on N80 steel in saline. The performed surface characterizations on inhibited surfaces validated the adsorption of CS on the N80 surface by forming thin inhibitor film to obstruct metal corrosion. The theoretical simulation studies using molecular dynamics and density functional theory corroborated the experimentally obtained results.

Evaluation of the in vitro anti-inflammatory and anti-Helicobacter pylori activities of chitosan-based biomaterials modified with copper oxide nanoparticles

For chemical modification, p-aminobenzoic acid was incorporated into chitosan Schiff base (ACsSB) and chitosan (ACs). Two ACs-based CuO nanoparticles composites; ACs/CuONPs-1 % and ACs/CuONPs-5 %, were also synthesized. Their structures were emphasized utilizing several analytical techniques; elemental analysis, FTIR, 1H NMR, XRD, SEM, EDX and TEM. Compared with standard cyclooxygenase (COX) inhibitor, Celecoxib, the prepared biomaterials showed in vitro selective inhibitory effectiveness against COX-2 enzyme that could be sorted, according to their MIC values that produce 50 % inhibition of COX-2 enzyme activity, as follows: Celecoxib (0.28 μg/mL) > ACs/CuONPs-5 % (4.1 μg/mL) > ACs/CuONPs-1 % (14.8 μg/mL) > ACs (38.5 μg/mL) > ACsSB (58.9 μg/mL) > chitosan (>125 μg/mL). Further, ACs/CuONPs-5 % has more in vitro inhibition efficiency towards Helicobacter pylori (H. pylori) than the other prepared biomaterials. Interestingly, the MIC value of 100 % growth inhibition of H. pylori for ACs/CuONP-5 % is equal to that of drug Clarithromycin (1.95 μg/mL). Thus, ACs/CuONPs-5 % has a promising potential as anti-H. pylori and selective anti-inflammatory agent. ACs/CuONPs-5 % is safe on the human gastric normal cells (GES-1). Therefore, amalgamation of both p-aminobenzoic acid and CuONPs into chitosan extremely promoted its anti-inflammatory and anti-H. pylori activity. This is a promising approach to achieve methods successful to compete the conventional antibiotics.

Reinforcement of the antimicrobial activity and biofilm inhibition of novel chitosan-based hydrogels utilizing zinc oxide nanoparticles

Two novel chemically cross-linked chitosan hydrogels were successfully prepared via insertion of oxalyl dihydrazide moieties between chitosan Schiff's base chains (OCsSB) and between chitosan chains (OCs). For more modification, two different concentrations of ZnO nanoparticles (ZnONPs) were loaded into OCs to obtain OCs/ZnONPs-1 % and OCs/ZnONPs-3 % composites. The prepared samples were recognized using elemental analyses, FTIR, XRD, SEM, EDS and TEM. Their inhibitory action against microbes and biofilms were classified as: OCs/ZnONPs-3 % > OCs/ZnONPs-1 % > OCs > OCsSB > chitosan. OCs has inhibition activity similar to Vancomycin of minimum inhibitory concentration (MIC) value of 3.9 μg/mL against P. aeruginosa. OCs exhibited minimum biofilm inhibitory concentration (MBIC) values (from 31.25 to 62.5 μg/mL) less than that of OCsSB (from 62.5 to 250 μg/mL) which lower than that of chitosan (from 500 to 1000 μg/mL) against S. epidermidis, P. aeruginosa and C. albicans. OCs/ZnNPs-3 % showed MIC value (that caused 100 % inhibition of Clostridioides difficile, C. difficile) of 0.48 μg/mL much lower than Vancomycin (1.95 μg/mL). Both OCs and OCs/ZnONPs-3 % composite were safe on normal human cells. Thus, inclusion of oxalyl dihydrazide and ZnONPs into chitosan greatly reinforced its antimicrobial activity. This is a good strategy to accomplish adequate systems for competing traditional antibiotics.

Preparation and Characterization of a New Bis-Uracil Chitosan-Based Hydrogel as Efficient Adsorbent for Removal of Anionic Congo Red Dye

A new hydrogel, based on chitosan crosslinked with 2-chlorophenyl-bis(6-amino-1,3-dimethyluracil-5-yl) methane, (2Clph-BU-Cs), has been successfully created. Various instrumental techniques such as elemental analysis, FTIR, SEM, and XRD were used to prove its structure. Its removal efficiency for anionic Congo red (CR) dye under different conditions for industrial wastewater treatment was studied. For optimizing the conditions to maximize CR dye removal, the impacts of temperature, contact time, pH, and initial concentration of the dye on adsorption capacity were investigated. The removal of the dye was pH-dependent, with a much higher value achieved at pH 4 than at pH 7 and 9. The maximum adsorption capacity of the hydrogel was 93.46 mg g^-1. The model of adsorption process was fitted to the pseudo-second-order kinetic model. The intraparticle diffusion demonstrated the multi-step nature of the adsorption process. The thermodynamic results showed that the adsorption process was endothermic because of the positive value of enthalpy (43.70 kJ mol^-1). The process of adsorption at high temperatures was spontaneous, according to the values of ∆G⁰. An increase in randomness was seen in the value of ∆S°. Generally, the investigated hydrogel has the potential to be used as a promising effective reusable adsorbent for industrial wastewater remediation.

Surface modification of TiO2 nanoparticles with organic molecules and their biological applications

In recent years, titanium(IV) dioxide nanoparticles (TiO₂NPs) have shown promising potential in various biological applications such as antimicrobials, drug delivery, photodynamic therapy, biosensors, and tissue engineering. For employing TiO₂NPs in these fields, their nanosurface must be coated or conjugated with organic and/or inorganic agents. This modification can improve their stability, photochemical properties, biocompatibility, and even surface area for further conjugation with other molecules such as drugs, targeting molecules, polymers, etc. This review describes the organic-based modification of TiO₂NPs and their potential applications in the mentioned biological fields. In the first part of this review, around 75 recent publications (2017-2022) are mentioned on the common TiO₂NP modifiers including organosilanes, polymers, small molecules, and hydrogels, which improve the photochemical features of TiO₂NPs. In the second part of this review, we presented 149 recent papers (2020-2022) about the use of modified TiO₂NPs in biological applications, in which specific bioactive modifiers are introduced in this part with their advantages. In this review, the following information is presented: (1) the common organic modifiers for TiO₂NPs, (2) biologically important modifiers and their benefits, and (3) recent publications on biological studies on the modified TiO₂NPs with their achievements. This review shows the paramount significance of the organic-based modification of TiO₂NPs to enhance their biological effectiveness, paving the way toward the development of advanced TiO₂-based nanomaterials in nanomedicine.

Design, Synthesis, and Characterization of Novel Bis-Uracil Chitosan Hydrogels Modified with Zinc Oxide Nanoparticles for Boosting Their Antimicrobial Activity

A new series of hydrogels was successfully prepared by incorporating various substituted bisuracil (R-BU) linkages between chitosan Schiff's base chains (R-BU-CsSB) and between chitosan chains (R-BU-Cs). After protection of the amino groups of chitosan by benzaldehyde, yielding chitosan Schiff's base (CsSB), the reaction with epichlorohydrin was confined on the -OH on C6 to produce epoxy chitosan Schiff's base (ECsSB), which was reacted with R-BU to form R-BU-CsSB hydrogels, and finally, the bioactive amino groups of chitosan were restored to obtain R-BU-Cs hydrogels. Further, some R-BU-Cs-based ZnO nanoparticle (R-BU-Cs/ZnONPs) composites were also prepared. Appropriate techniques such as elemental analysis, FTIR, XRD, SEM, and EDX were used to verify their structures. Their inhibition potency against all the tested microbes were arranged as: ZnONPs bio-composites > R-BU-Cs hydrogels > R-BU-CsSB hydrogels > Cs. Their inhibition performance against Gram-positive bacteria was better than Gram-negative ones. Their minimum inhibitory concentration (MIC) values decreased as a function of the negative resonance effect of the substituents in the aryl ring of R-BU linkages in the hydrogels. Compared with Vancomycin, the ZnONPs bio-composites showed superior inhibitory effects against most of the tested Gram-negative bacteria, all inspected Gram-positive ones, and all investigated fungi.

Chitosan as a Tool for Sustainable Development: A Mini Review

New developments require innovative ecofriendly materials defined by their biocompatibility, biodegradability, and versatility. For that reason, the scientific society is focused on biopolymers such as chitosan, which is the second most abundant in the world after cellulose. These new materials should show good properties in terms of sustainability, circularity, and energy consumption during industrial applications. The idea is to replace traditional raw materials with new ecofriendly materials which contribute to keeping a high production rate but also reducing its environmental impact and the costs. The chitosan shows interesting and unique properties, thus it can be used for different purposes which contributes to the design and development of sustainable novel materials. This helps in promoting sustainability through the use of chitosan and diverse materials based on it. For example, it is a good sustainable alternative for food packaging or it can be used for sustainable agriculture. The chitosan can also reduce the pollution of other industrial processes such as paper production. This mini review collects some of the most important advances for the sustainable use of chitosan for promoting circular economy. Hence, the present review focuses on different aspects of chitosan from its synthesis to multiple applications.