Preparation of norfloxacin-grafted chitosan antimicrobial sponge and its application in wound repair

Thermo-assisted fabrication of a novel shape-memory hyaluronic acid sponge for non-compressible hemorrhage control

Hyaluronic acid (HA), a major component of skin extracellular matrix, provides an excellent framework for hemostatic design; however, there still lacks HA materials tailored with superior mechanical properties to address non-compressible hemorrhages. Here, we present a solvent-free thermal approach for constructing a shape-memory HA sponge for this application. Following facile thermal incubation around 130 °C, HA underwent cross-linking via esterification with poly(acrylic acid) within the sponge pre-shaped through a prior freeze-drying process. The resulting sponge system exhibited extensively interconnected macropores with a high fluid absorption capacity, excellent shape-memory property, and robust mechanical elasticity. When introduced to whole blood in vitro, the HA sponges demonstrated remarkable hemostatic properties, yielding a shorter coagulation time and lower blood clotting index compared to the commercial gelatin sponge (GS). Furthermore, in vivo hemostatic studies involving two non-compressible hemorrhage models (rat liver volume defect injury or femoral artery injury) achieved a significant reduction of approximately 64 % (or 56 %) and 73 % (or 70 %) in bleeding time and blood loss, respectively, which also outperformed GS. Additionally, comprehensive in vitro and in vivo evaluations suggested the good biocompatibility and biodegradability of HA sponges. This study highlights the substantial potential for utilizing the designed HA sponges in massive bleeding management.

Recent advances in harnessing biological macromolecules for wound management: A review

Wound dressings (WDs) are an essential component of wound management and serve as an artificial barrier to isolate the injured site from the external environment, thereby helping to prevent exogenous infections and supporting healing. However, maintaining a moist wound environment, providing protection from infection, good biocompatibility, and allowing for gas exchange, remain a challenge in device design. Functional wound dressings (FWDs) prepared from hybrid biological macromolecule-based materials can enhance efficacy of these systems for skin wound management. This review aims to provide an overview of the state-of-the-art FWDs within the field of wound management, with a specific focus on hybrid biomaterials, techniques, and applications developed over the past five years. In addition, we highlight the incorporation of biological macromolecules in WDs, the emergence of smart WDs, and discuss the existing challenges and future prospects for the development of advanced WDs.

Chitosan‑iodine complexes: Preparation, characterization, and antibacterial activity

Bacterial infections have always been a major threat to public health, and the development of effective antibacterial substances from natural polymers is crucial. 2-Aminoisonicotinic acid (AN) was grafted onto chitosan by 1-ethyl-(3-dimethylaminopropyl)carbodiimide-mediated coupling reactions, and then modified chitosan‑iodine (CSAN-I) complexes were prepared by solvent-assisted grinding. The samples were characterized using ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, proton nuclear magnetic resonance spectroscopy, and X-ray diffraction, confirming that CSAN-I complexes had been successfully prepared. Thermogravimetric (TG) analysis indicated that the chemical modification of chitosan and iodine complexation reduced the thermal stability; X-ray photoelectron spectroscopy (XPS) analysis revealed that 81 % of the iodine in CSAN-I complex was in the form of triiodide ions. The iodine contents of three CSAN-I complexes (CSAN-I-1, CSAN-I-2 and CSAN-I-3) were 1.59 ± 0.22 %, 3.18 ± 0.26 %, and 5.56 ± 0.41 %, respectively. The antibacterial effects were evaluated in vitro, and the results indicated that CSAN-I complexes had strong antibacterial activities against both E. coli and S. aureus. In particular, CSAN-I-3 exhibited the best antibacterial effect. In addition, CSAN-I-3 was nontoxic to L929 cells with good cytocompatibility. Therefore, CSAN-I complexes can be considered as promising candidates for wound management in clinical applications.

Multifunctional hydrogel bioscaffolds based on polysaccharide to promote wound healing: A review

Various types of skin wounds pose challenges in terms of healing and susceptibility to infection, which can have a significant impact on physical and mental well-being, and in severe cases, may result in amputation. Conventional wound dressings often fail to provide optimal support for these wounds, thereby impeding the healing process. As a result, there has been considerable interest in the development of multifunctional polymer matrix hydrogel scaffolds for wound healing. This review offers a comprehensive review of the characteristics of polysaccharide-based hydrogel scaffolds, as well as their applications in different types of wounds. Additionally, it evaluates the advantages and disadvantages associated with various types of multifunctional polymer and polysaccharide-based hydrogel scaffolds. The objective is to provide a theoretical foundation for the utilization of multifunctional hydrogel scaffolds in promoting wound healing.

Mesoporous chitosan nanofibers loaded with norfloxacin and coated with phenylboronic acid perform as bioabsorbable active dressings to accelerate the healing of burn wounds

The paper reports new chitosan-based nanofibers, designed to address the healing of burn wounds. To this aim, mesoporous chitosan fiber mats were prepared by electrospinning using poly(ethylene oxide) as sacrificial additive, followed by loading with norfloxacin and coating with an antifungal agent via dynamic imine bonds. Dynamic vapor sorption experiment proved intra-fiber mesopores around 2.7 nm, and UV-vis, FTIR, and NMR spectroscopy confirmed the norfloxacin embedding and the imination reaction. SEM, AFM and POM techniques displayed semicrystalline nanofibers with average diameter around 170 nm entangled into a non-woven mat. Their mesoporous nature favored a rapid adsorption of fluids up to 17 g/g, and a biodegradation rate fitting the wound healing rate, i.e. up to 30 % mass loss in media of pH characteristic to wound exudate and total degradation in that characteristic to normal dermis. The composite fibers released the NFX and 2FPBA in a controlled manner, and showed antimicrobial activity against gram positive, gram negative and fungal strains. They had no cytotoxic effect on normal human dermal fibroblasts, and showed biocompatibility on experimental rats. The investigation of wound healing ability on second/third-degree burn model in rats revealed wound closure and total restoration of the fully functional dermis and epidermis.

Fabrication of Antibacterial and Antioxidant ZnO-Impregnated Amine-Functionalized Chitosan Bio-Nanocomposite Membrane for Advanced Biomedical Applications

Developing a variety of safe and effective functioning wound dressings is a never-ending objective. Due to their exceptional antibacterial activity, biocompatibility, biodegradability, and healing-promoting properties, functionalized chitosan nanocomposites have attracted considerable attention in wound dressing applications. Herein, a novel bio-nanocomposite membrane with a variety of bio-characteristics was created through the incorporation of zinc oxide nanoparticles (ZnONPs) into amine-functionalized chitosan membrane (Am-CS). The developed ZnO@Am-CS bio-nanocomposite membrane was characterized by various analysis tools. Compared to pristine Am-CS, the developed ZnO@Am-CS membrane revealed higher water uptake and adequate mechanical properties. Moreover, increasing the ZnONP content from 0.025 to 0.1% had a positive impact on antibacterial activity against Gram-positive and Gram-negative bacteria. A maximum inhibition of 89.4% was recorded against Escherichia coli, with a maximum inhibition zone of 38 ± 0.17 mm, and was achieved by the ZnO (0.1%)@Am-CS membrane compared to 72.5% and 28 ± 0.23 mm achieved by the native Am-CS membrane. Furthermore, the bio-nanocomposite membrane demonstrated acceptable antioxidant activity, with a maximum radical scavenging value of 46%. In addition, the bio-nanocomposite membrane showed better biocompatibility and reliable biodegradability, while the cytotoxicity assessment emphasized its safety towards normal cells, with the cell viability reaching 95.7%, suggesting its potential use for advanced wound dressing applications.

Development of chitosan-based hydrogels for healthcare: A review

Chitosan-based hydrogels (CSH) are promising materials for healthcare. Based on the relationship among structure, property and application, researches reported within last decade are chosen to elucidate the developing approaches and potential applications of target CSH. The applications of CSH are classified into the conventional biomedical fields, such as drug controlled release, tissue repair and monitoring, and the essential ones including food safety, water purification and air cleaning. The approaches focused on in this article are the reversible chemical and physical ones. Apart from describing the current status of the development, suggestions are presented as well.

Optimization Preparation and Evaluation of Chitosan Grafted Norfloxacin as a Hemostatic Sponge

Considering the great harm to the human body caused by severe and massive bleeding, in this study, chitosan-grafted norfloxacin (CTS-NF) composites were prepared with chitosan (CTS) and norfloxacin (NF) as raw materials by a 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide-mediated coupling method to solve the limitations of slow hemostatic and poor anti-infective effects of current dressings on the market. The effects of the mass ratio of CTS to NF (M_CTS/M_NF), reaction temperature T and reaction time t on the grafting rate (η%) of the products were investigated through single factor tests. The preparation process was optimized with the η% as an evaluation index by means of the Box-Behnken test design and response surface analysis. The antimicrobial activity was evaluated by inhibition zone assay, and the hemostatic activity of the prepared composites was evaluated in vitro and in vivo. The results suggested that the optimum preparation conditions were the mass ratio of CTS to NF (M_CTS/M_NF) 5:3, reaction temperature 65 °C, and reaction time 4 h. Under this condition, the η% of CTS-NF was 45.5%. The CTS-NF composites displayed significant antimicrobial activities. Moreover, in vitro hemostasis results revealed that the CTS-NF composite had a lower blood clotting index and absorbed red blood cells to promote aggregation. In vivo ear and live hemostasis, the CTS-NF groups showed short hemostatic time (49.75 ± 3.32 s and 50.00 ± 7.21 s) and more blood loss (0.07 ± 0.010 g and 0.075 ± 0.013 g). The results showed that CTS-NF reduced the bleeding time and volume, exhibiting a significant coagulation effect. Therefore, the CTS-NF sponge is expected to be a new, effective hemostatic and antibacterial material in the future.