Water-soluble amino functionalized chitosan: Preparation, characterization, antioxidant and antibacterial activities

Synthesis and antioxidant evaluation of coumarin-functionalised chitosan: A potent, non-toxic free radical scavenging compound

In the present study, we designed to link the coumarin molecule to chitosan via a triazole group and synthesized chitosan-coumarin derivatives, which were further quaternized in one step in order to further improve their solubility to obtain a second series of chitosan-coumarin ammonium salt derivatives. The structures of these chitosan derivatives were verified by FT-IR and 1H NMR. They were tested for their antioxidant activities. The experimental results showed that the derivatives had excellent free radical scavenging ability. The introduction of the coumarin moiety significantly improved the antioxidant activity, and the scavenging capacity was much higher than that of the chitosan feedstock in all three antioxidant tests. Overall, the scavenging capacity of chitosan-coumarin ammonium salt derivatives was slightly higher than that of chitosan-coumarin derivatives, with the highest scavenging rates in all three tests. Compound 8B scavenged 98.74 % (0.01 mg/mL) of superoxide anion radicals, compound 8D scavenged 95.5 % (0.3 mg/mL) of DPPH radicals and compound 8A scavenged 92.97 % (0.2 mg/mL) of hydroxyl radicals. Toxicity assays used L929 cells demonstrated that there was no significant toxicity of the derivatives. The results indicated that the chitosan derivatives described herein were safe and non-toxic and have good antioxidant activity.

Preparation of dehydroabietic acid modified chitosan/wintergreen essential oil film and mandarin freshness preservation study

In order to obtain an eco-friendly and multifunctional preservative film, dehydroabietic acid (DHA) modified chitosan (CS) containing wintergreen essential oil (CSDA-WEO) film was developed. CS grafted by DHA was able to increase the deformation capacity of CS film (MCS) by about 12.5 %, and the film made by CSDA containing WEO increased the tensile deformation capacity to 32 %. CSDA-WEO film (MCSDA-WEO) can improve the transmittance and UV blocking, and MCSDA-WEO can be completely degraded within 35 days. In the Film-2 approach, PE film (MPE), CSDA film (MCSDA) and MCSDA-WEO again improve the preservative performance based on the original 1 approach and have good freshness preservation. MCSDA and MCSDA-WEO were able to delay the loss of antioxidant activity, improve the antifungal property and prolong the shelf life of mandarins up to 18 days. MCSDA and MCSDA-WEO have good performance, are green and healthy, and have a wide perspective for food preservation.

Recent advances in modifications, biotechnology, and biomedical applications of chitosan-based materials: A review

Chitosan, a natural polysaccharide with recognized biocompatibility, non-toxicity, and cost-effectiveness, is primarily sourced from crustacean exoskeletons. Its inherent limitations such as poor water solubility, low thermal stability, and inadequate mechanical strength have hindered its widespread application. However, through modifications, chitosan can exhibit enhanced properties such as water solubility, antibacterial and antioxidant activities, adsorption capacity, and film-forming ability, opening up avenues for diverse applications. Despite these advancements, realizing the full potential of modified chitosan remains a challenge across various fields. The purpose of this review article is to conduct a comprehensive evaluation of the chemical modification techniques of chitosan and their applications in biotechnology and biomedical fields. It aims to overcome the inherent limitations of chitosan, such as low water solubility, poor thermal stability, and inadequate mechanical strength, thereby expanding its application potential across various domains. This review is structured into two main sections. The first part delves into the latest chemical modification techniques for chitosan derivatives, encompassing quaternization, Schiff base formation, acylation, carboxylation, and alkylation reactions. The second part provides an overview of the applications of chitosan and its derivatives in biotechnology and biomedicine, spanning areas such as wastewater treatment, the textile and food industries, agriculture, antibacterial and antiviral activities, drug delivery systems, wound dressings, dental materials, and tissue engineering. Additionally, the review discusses the challenges associated with these modifications and offers insights into potential future developments in chitosan-based materials. This review is anticipated to offer theoretical insights and practical guidance to scientists engaged in biotechnology and biomedical research.

Functional potential of chitosan-metal nanostructures: Recent developments and applications

Chitosan (Cs), a naturally occurring biopolymer, has garnered significant interest due to its inherent biocompatibility, biodegradability, and minimal toxicity. This study investigates the effectiveness of various reaction strategies, including acylation, acetylation, and carboxymethylation, to enhance the solubility profile of Cs. This review provides a detailed examination of the rapidly developing field of Cs-based metal complexes and nanoparticles. It delves into the diverse synthesis methodologies employed for their fabrication, specifically focusing on ionic gelation and in-situ reduction techniques. Furthermore, the review offers a comprehensive analysis of the characterization techniques utilized to elucidate the physicochemical properties of these complexes. A range of analytical techniques are utilized, including Ultraviolet-Visible Spectroscopy (UV-Vis), Fourier-Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM) and others. By comprehensively exploring a wide range of applications, the review emphasizes the significant potential of Cs in various scientific disciplines. Diagrams, figures, and tables effectively illustrate the synthesis processes, promoting a clear understanding for the reader. Chitosan-metal nanostructures/nanocomposites significantly enhance antimicrobial efficacy, drug delivery, and environmental remediation compared to standard chitosan composites. The integration of metal nanoparticles, such as silver or gold, improves chitosan's effectiveness against a range of pathogens, including resistant bacteria. These nanocomposites facilitate targeted drug delivery and controlled release, boosting therapeutic bioavailability. Additionally, they enhance chitosan's ability to absorb heavy metals and dyes from wastewater, making them effective for environmental applications. Overall, chitosan-metal nanocomposites leverage chitosan's biocompatibility while offering improved functionalities, making them promising materials for diverse applications. This paper sheds light on recent advancements in the applications of Cs metal complexes for various purposes, including cancer treatment, drug delivery enhancement, and the prevention of bacterial and fungal infections.

Chitosan-Based Hydrogels as Antibacterial/Antioxidant/Anti-Inflammation Multifunctional Dressings for Chronic Wound Healing

Due to repeated microbial infection, persistent inflammation, excessive oxidative stress, and cell dysfunction, chronic wounds are difficult to heal, posing a serious threat to public health. Therefore, developing multifunctional wound dressings that can regulate the complex microenvironment of chronic wounds and enhance cellular function holds great significance. Recently, chitosan has emerged as a promising biopolymer for wound healing due to its excellent biocompatibility, biodegradability, and versatile bioactivity. The aim of this review is to provide a comprehensive understanding of the mechanisms of delayed chronic wound healing and discuss the healing-promoting properties of chitosan and its derivatives, such as good biocompatibility, antibacterial activity, hemostatic capacity, and the ability to promote tissue regeneration. On this basis, the potential applications of chitosan-based hydrogels are summarized in chronic wound healing, including providing a suitable microenvironment, eliminating bacterial infections, promoting hemostasis, inhibiting chronic inflammation, alleviating oxidative stress, and promoting tissue regeneration. In addition, the concerns and perspectives for the clinical application of chitosan-based hydrogels are also discussed.

Research progress and application of chitosan dressings in hemostasis: A review

Hemorrhage affects human health, and severe bleeding remains a leading contributor to trauma-related mortality. The speed and effectiveness of the application of hemostatic materials are critical. Conventional hemostatic dressings such as bandages and gauze are gradually being replaced by new types of hemostatic dressings due to their poor hemostatic and antibacterial properties. Chitosan, a biopolymer, is biodegradable and nontoxic and possesses hemostatic and antibacterial properties. Chitosan induces hemostasis through direct contact with red corpuscles and platelets, independent of the coagulation pathways of the host, rendering it an optimal hemostatic dressing. It is widely used in wound care, particularly to stop bleeding, promote wound healing, and provide antimicrobial properties. This article reviews the recent research and development of chitosan-based hemostatic dressings, focusing on trauma hemostasis, burn hemostasis, diabetic skin ulcer hemostasis and other aspects. It also emphasizes the significance of chitosan dressings in wound hemostasis and healing, identifies their research opportunities in hemostasis and wound healing, and explores new research directions.

Mussel-inspired chitosan and its applications in the biomedical field

Chitosan (CS) has physicochemical properties including solubility, crystallinity, swellability, viscosity, and cohesion, along with biological properties like biocompatibility, biodegradation, antioxidant, antibacterial, and antitumor effects. However, these characteristics of CS are greatly affected by its degree of deacetylation, molecular weight, pH and other factors, which limits the application of CS in biomedicine. The modification of CS with catechol-containing substances inspired by mussels can not only improve these properties of CS, but also endow it with self-healing property, providing an environmentally friendly and sustainable way to promote the application of CS in biomedicine. In this paper, the properties of CS and its limitation in the biomedical filed are introduced in detail. Then, the modification methods and properties of substances with catechol groups inspired by mussels on CS are reviewed. Finally, the applications of modified CS in the biomedical field of wound healing, drug delivery, anticancer therapy, biosensor and 3D printing are further discussed. This review can provide valuable information for the design and exploitation of mussel-inspired CS in the biomedical field.

Hybrid nanoparticles combining nanoselenium-mediated Carica papaya extract and trimethyl chitosan for combating clinical multidrug-resistant bacteria

Multidrug-resistant bacterial infections pose a significant threat to human health, prompting the exploration of innovative solutions. In this study, a new series of antibacterial hybrid nanoparticles (HNPs) were developed. The HNPs are based on a combination of selenium nanoparticles (SeNPs), synthesized using Carica papaya leaf extract, and chitosan (CS/SeHNPs) or trimethyl chitosan (TMC/SeHNPs), respectively. Comprehensive characterization using UV-Vis, FTIR, XRD, SEM-EDX, DLS, TEM, and DSC confirmed the structure and properties of the developed HNPs. SeNPs, CS/SeHNPs, and TMC/SeHNPs showed average hydrodynamic size of 78.8, 91.3, and 122 nm, and zeta potentials of -6.35 mV, +32.8 mV, and +54.8 mV, respectively. Biological assessments were conducted, including antibacterial and antibiofilm assays against clinical strains (E. coli, S. aureus, and K. pneumoniae), along with antioxidant activity. TMC/SeHNPs demonstrated superior performance compared to SeNPs and CS/SeHNPs with the lowest minimum inhibition concentrations (MIC) against S. aureus and K. pneumoniae (3.9 μg/mL) and 62.5 μg/mL against E. coli in addition to robust antibiofilm activity. Furthermore, the TMC/SeHNPs exhibited potent DPPH free radical scavenging ability and demonstrated good biocompatibility, as evidenced by cell viability assays on HFB4 cells. Overall, TMC/SeHNPs emerged as promising candidates in nanomedicine, offering high antioxidant, antibacterial, and antibiofilm activities alongside excellent biocompatibility.

Chitosan from the base of Flammulina velutipes stipe alleviates oral Candida albicans infection via modulating Th-17 cell differentiation and Streptococcus mutans

The base of Flammulina velutipes (F. velutipes) stipe are agricultural wastes generated during the cultivation of edible fungus F. velutipes with high amount of chitin. Herein, this study firstly prepared chitosan from the base of F. velutipes stipe (FVC) and its structure was identified. It was confirmed that FVC acted as an antigenic substance to activate the immune system in vivo and in vitro, drive T cells to differentiate into Th-17 cells, and establish an effective mucosal immune barrier in the oral cavity, thus inhibited C. albicans infection; On the other hand, FVC maintained the oral flora stability and significantly reduced the abundance of Streptococcus spp., which was closely related to C. albicans infection. On this basis, the inhibitory effects of FVC on oral pathogens Streptococcus mutans and Lactobacillus casei associated with C. albicans infection were further verified, and it was demonstrated that FVC effectively interfered with the growth of pathogenic bacteria by inducing the production of intracellular ROS to damage bacterial cells. Therefore, FVC may be potentially exploited as a novel approach to the prevention and treatment of oral C. albicans infection.

A novel chitosan antioxidant bearing sulfhydryl group: Synthesis, characterization and activity assessment

To improve the antioxidant activity, sulfhydryl groups (-SH) were introduced into chitosan. Acylated chitosan derivatives, chitosan cationic salt derivatives, hydroxypropyl trimethylammonium chloride chitosan quaternary ammonium salt (HACC) derivatives and N,N,N-trimethyl chitosan iodine (TMC) derivatives were obtained. The chitosan derivatives were characterized by FTIR and 1H NMR to confirm the successful synthesis. Ellman's reagent was used to determine that the compound contained free sulfhydryl groups. The water solubility and thermal stability of chitosan and derivatives were evaluated. The antioxidant activities of the derivatives were verified, including DPPH radical scavenging activity, superoxide anion radical scavenging activity and reducing power activity. The novel chitosan derivatives showed excellent antioxidant activities. Toxicity assay used L929 cells proved that the derivatives had no significant toxic. The results showed that the chitosan derivatives bearing sulfhydryl groups described in this paper has a certain antioxidant effect, which provides a practical approach for further study of chitosan.

Enhanced biological activities of coumarin-functionalized polysaccharide derivatives: Chemical modification and activity assessment

Natural polysaccharides are abundant and renewable resource, but their applications are hampered by limited biological activity. Chemical modification can overcome these drawbacks by altering their structure. Three series of polysaccharide derivatives with coumarins were synthesized to obtain polysaccharide derivatives with enhanced biological activity. The biological activities were tested, including antioxidant property, antifungal property, and antibacterial property. Based on the results, the inhibitory properties of the coumarin-polysaccharide derivatives were significantly improved over the raw polysaccharide. The IC50 of the inhibition of DPPH, ABTS•+, and superoxide (O2•-) radical-scavenging was 0.06-0.15 mg/mL, 2.3-15.9 μg/mL, and 0.03-0.25 mg/mL, respectively. Compared with the raw polysaccharides, coumarin- polysaccharide derivatives exhibited higher efficacy in inhibiting the growth of tested phytopathogens, showing inhibitory indices of 60.0-93.6 % at 1.0 mg/mL. Chitosan derivatives with methyl and chlorine (Compound 10B and 10C) exhibited significant antibacterial activity against S. aureus (MIC = 31.2 μg/mL), E. coli (MIC = 7.8 μg/mL), and V. harveyi (MIC = 15.6 μg/mL), respectively. The results of the cytotoxicity assay showed no observed cytotoxicity when the RAW 264.7 cells were incubated with the synthesized polysaccharide derivatives at the tested concentrations.

Sustainable Coating Based on Zwitterionic Functionalized Polyurushiol with Antifouling and Antibacterial Properties

Zwitterionic polymer coatings facilitate the formation of hydration layers via electrostatic interactions on their surfaces and have demonstrated efficacy in preventing biofouling. They have emerged as a promising class of marine antifouling materials. However, designing multifunctional, environmentally friendly, and natural products-derived zwitterionic polymer coatings that simultaneously resist biofouling, inhibit protein adhesion, exhibit strong antibacterial properties, and reduce algal adhesion is a significant challenge. This study employed two diisocyanates as crosslinkers and natural urushiol and ethanolamine as raw materials. The coupling reaction of diisocyanates with hydroxyl groups was employed to synthesize urushiol-based precursors. Subsequently, sulfobetaine moieties were introduced into the urushiol-based precursors, developing two environmentally friendly and high-performance zwitterionic-functionalized polyurushiol antifouling coatings, denoted as HUDM-SB and IPUDM-SB. The sulfobetaine-functionalized polyurushiol coating exhibited significantly enhanced hydrophilicity, with the static water contact angle reduced to less than 60°, and demonstrated excellent resistance to protein adhesion. IPUDM-SB exhibited antibacterial efficacy up to 99.9% against common Gram-negative bacteria (E. coli and V. alginolyticus) and Gram-positive bacteria (S. aureus and Bacillus. sp.). HUDM-SB achieved antibacterial efficacy exceeding 95.0% against four bacterial species. Furthermore, the sulfobetaine moieties on the surfaces of the IPUDM-SB and HUDM-SB coatings effectively inhibited the growth and reproduction of algal cells by preventing microalgae adhesion. This zwitterionic-functionalized polyurushiol coating does not contain antifouling agents, making it a green, environmentally friendly, and high-performance biomaterial-based solution for marine antifouling.

Fabrication of affinity-based drug delivery systems based on electrospun chitosan sulfate/poly(vinyl alcohol) nanofibrous mats

Benign electrospinning of chitosan in aqueous medium is an open challenge mainly due to its insolubility in neutral pH and inter- and intramolecular hydrogen bonding interactions. Here, we developed a simple and widely-used methodology to improve the chitosan electrospinnability through the sulfation of chitosan and its further mixing with poly(vinyl alcohol) for the first time. The FTIR, 1H NMR and elemental analyses showed the successful sulfation of chitosan. Furthermore, the viscosity and electrical conductivity measurements revealed the high solubility of chitosan sulfate (CS) in aqueous media. In the next step, a uniform electrospun nanofibrous mat of CS/PVA was fabricated with a fiber diameter ranging from 90 to 340 nm. The crosslinked CS/PVA (50/50) nanofibrous mat as the optimum sample showed a swelling ratio of 290 ± 4 % and a high Young's modulus of 3.75 ± 0.10 GPa. Finally, malachite green (MG) as a cationic drug model was loaded into different samples of chitosan film, CS film, and CS/PVA (50/50) nanofibrous mat and its release behavior was studied. The results of these analyses revealed that the CS/PVA (50/50) nanofibrous mat can successfully load higher contents of the MG and also release it in a sustained manner.

Water-soluble fluorine-functionalized chitooligosaccharide derivatives: Synthesis, characterization and antimicrobial activity

In this work, a series of water-soluble fluorine-functionalized chitooligosaccharide derivatives were synthesized by conjugating nicotinic acid to chitooligosaccharide via nicotinylation reaction, followed by nucleophilic reaction with ethyl bromide, benzyl bromide and fluorobenzyl bromides. Synthesized derivatives were identified structurally by Fourier Transform Infrared Spectroscopy and Nuclear Magnetic Resonance. In addition, the antibacterial activities of chitooligosaccharide derivatives against several disease-causing bacteria were assessed by the broth dilution method and Kirby-Bauer method, the mycelium growth rate method was used to assessing the antifungal properties of samples against three plant-threatening fungi. Among the chitooligosaccharide derivatives, those containing benzyl or fluorobenzyl exhibited noteworthy antimicrobial activity. Specifically, the chitooligosaccharide derivative containing 2,3,4-trifluorobenzyl displayed remarkable antimicrobial activity, with an inhibition index of 84.35% against Botryis cinerea at a concentration of 1.0 mg/mL. Additionally, its MIC value against Staphylococcus aureus was found to be 0.03125 mg/mL, while the MBC value was determined to be 0.0625 mg/mL. The findings of the study revealed that the incorporation of pyridinium cations and fluorine into the chitooligosaccharide backbone may play a critical role in strengthening its ability to combat harmful microorganisms. Furthermore, the cytotoxicities of chitooligosaccharide derivatives against Huvec cells were evaluated through MTT assay, and all samples were not toxic. As a consequence, the water-soluble fluorine-functionalized chitooligosaccharide derivatives possessed rapid microbicidal properties and good biocompatibility, which provided promising prospects for the development of a more effective and environmentally friendly antimicrobial agent.

A critical review of enzymes immobilized on chitosan composites: characterization and applications

Enzymes with industrial significance are typically used in biological processes. However, instability, high sensitivity, and impractical recovery are the major drawbacks of enzymes in practical applications. In recent years, the immobilization technology has attracted wide attention to overcoming these restrictions and improving the efficiency of enzyme applications. Chitosan (CS) is a unique functional substance with biocompatibility, biodegradability, non-toxicity, and antibacterial properties. Chitosan composites are anticipated to be widely used in the near future for a variety of purposes, including as supports for enzyme immobilization, because of their advantages. Therefor this review explores the effects of the chitosan's structure, molecular weight, degree of deacetylation on the enzyme immobilized, effect of key factors, and the enzymes immobilized on chitosan based composites for numerous applications, including the fields of biosensor, biomedical science, food industry, environmental protection, and industrial production. Moreover, this study carefully investigates the advantages and disadvantages of using these composites as well as their potential in the future.

Soy protein interactions with polyphenols: Structural and functional changes in natural and cationized forms

Herein, cationic soy protein (NSPI) was synthesized by grafting Ethylenediamine (EDA) onto soy protein isolate (SPI), and protein-gallic acid (GA) complexes were formed by mixing NSPI with GA in various ratios. We assessed the structure, particle size, thermal stability, emulsifying ability, and antioxidant capacity of NSPI and complexes. Results show that grafting with EDA introduced a positive charge to SPI and resulted in a uniform particle size, and enhanced thermal stability, emulsifying ability, and antioxidant capacity. In addition, NSPI presented more amino groups and stronger interactions with GA compared to SPI. EDA and GA synergistically increased the flexibility of SPI, reducing the α-helix content and increasing the random coil content. Moreover, the interactions between SPI, NSPI, and GA were static, and hydrophobic and electrostatic between GA and SPI and NSPI, respectively. Grafting SPI with EDA improved functionality and interactions with GA, implying that NSPI-GA complexes may function as emulsifiers and antioxidants.

A Salt-Resistant and Antibacterial Cu2 ZnSnS4 -Based Hydrogel for High Efficient Photothermal Distillation in Seawater Desalination and Sewage Purification

Solar steam generation technology (SSGT) using unlimited solar energy is regarded as one of the most promising sustainable technologies to produce clean water. However, most of studies on SSGT simply focus on how to improve salt resistance as well as exclude inorganic and organic pollutants in targeted water, and only very limited studies pay attention to the micro-organisms in the collected water. Herein, one porous Cu2 ZnSnS4 -based photothermal hydrogel (CZTS-PH) with antibacterial properties as well as good salt resistance was successfully prepared. The CZTS-PH was measured with the water evaporation rate as high as 3.249 kg m-2  h-1 and photothermal conversion efficiency of 96.3 % under one sun irradiation. Impressively, owing to the amino groups in the skeleton, CZTS-PH can significantly deteriorate the cell membrane and lead to the death of the Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), which ensures its long-term stability photothermal conversion and the safety of clean water. Overall, the admired photothermal conversion efficiency, and the excellent salt resistance and antibacterial performance suggest that CZTS-PH could be a promising full-scale device applied in seawater desalination and water purification.

Antibacterial and antioxidant properties of phenolic acid grafted chitosan and its application in food preservation: A review

Chitosan is a bio-renewable natural polymeric material. The antibacterial and antioxidant activity of chitosan can be enhanced by grafting with phenolic acids to further expand its application in food. Therefore, this paper focuses on reviewing the structure, antimicrobial and antioxidant activities and their mechanisms with phenolic acid-g-CS, evaluating its cytotoxicity, and describing its application in various food preservation. In general, different reaction mechanisms of phenolic acid-g-CS synthesis lead to different product structures. Compared to chitosan, phenolic acid-g-chitosan exhibited enhanced antibacterial and antioxidant activities. The toxicity assessment showed that phenolic acid-g-CS is not cytotoxic. Moreover, phenolic acid-g-CS has been applied to a variety of food products such as fruits, vegetables and meat with good results. Overall, this review provides a certain reference for subsequent researchers to design phenolic acid-g-CS more rationally and for the subsequent development of phenolic acid-g-CS in food preservation.

Nanofiber Scaffolds as Drug Delivery Systems Promoting Wound Healing

Nanofiber scaffolds have emerged as a revolutionary drug delivery platform for promoting wound healing, due to their unique properties, including high surface area, interconnected porosity, excellent breathability, and moisture absorption, as well as their spatial structure which mimics the extracellular matrix. However, the use of nanofibers to achieve controlled drug loading and release still presents many challenges, with ongoing research still exploring how to load drugs onto nanofiber scaffolds without loss of activity and how to control their release in a specific spatiotemporal manner. This comprehensive study systematically reviews the applications and recent advances related to drug-laden nanofiber scaffolds for skin-wound management. First, we introduce commonly used methods for nanofiber preparation, including electrostatic spinning, sol-gel, molecular self-assembly, thermally induced phase separation, and 3D-printing techniques. Next, we summarize the polymers used in the preparation of nanofibers and drug delivery methods utilizing nanofiber scaffolds. We then review the application of drug-loaded nanofiber scaffolds for wound healing, considering the different stages of wound healing in which the drug acts. Finally, we briefly describe stimulus-responsive drug delivery schemes for nanofiber scaffolds, as well as other exciting drug delivery systems.

Synthesis, Characterization, Properties, and Biomedical Application of Chitosan-Based Hydrogels

The prospective applications of chitosan-based hydrogels (CBHs), a category of biocompatible and biodegradable materials, in biomedical disciplines such as tissue engineering, wound healing, drug delivery, and biosensing have garnered great interest. The synthesis and characterization processes used to create CBHs play a significant role in determining their characteristics and effectiveness. The qualities of CBHs might be greatly influenced by tailoring the manufacturing method to get certain traits, including porosity, swelling, mechanical strength, and bioactivity. Additionally, characterization methods aid in gaining access to the microstructures and properties of CBHs. Herein, this review provides a comprehensive assessment of the state-of-the-art with a focus on the affiliation between particular properties and domains in biomedicine. Moreover, this review highlights the beneficial properties and wide application of stimuli-responsive CBHs. The main obstacles and prospects for the future of CBH development for biomedical applications are also covered in this review.

A novel water-soluble chitosan grafted with nerol: Synthesis, characterization and biological activity

In order to improve the antibacterial activity of chitosan and change its solubility, a novel water-soluble chitosan (CS)-nerol (N) derivative (CS-N) was prepared via Schiff base reaction and grafting reaction. FT-IR, NMR, XRD, TGA and SEM were used to characterize the structure and physicochemical properties, and in vitro antibacterial, antioxidant, and cellular assays were used to test for bioactivity and safety. The results revealed that the C6 hydroxyl group of CS was substituted with N, with a degree of substitution of 38 % for CS-N. Furthermore, compared to CS, CS-N demonstrated superior antibacterial activity against Escherichia coli and Staphylococcus aureus, as well as significant DPPH and ABTS free radical scavenging activity. Most importantly, CS-N did not harm HaCaT cells. In conclusion, this study provides a promising strategy for the design of chitosan derivatives with significant potential for application in pharmaceutical, food and cosmetic applications.

A study on the effects of interfering with the conventional sequential protocol for chemical isolation and characterization of chitosan from biowaste of giant freshwater prawn Macrobrachium rosenbergii

Unless better measures are put in place to address the environmental and social impacts emanating from the huge waste generated from sea food processing industries; 'tragedy of the commons' is inevitable. Needless to re-emphasise the enormous contributions of aquaculture as the perfect substitute to capture fisheries which has been proven unsustainable. Be that as it may, the huge amount of bio-waste produced could be transformed into useful products such as chitin and chitosan with far reaching applications. Chitin and chitosan have been consistently processed from many sources following the traditional chemical sequence of Demineralization (DM), Deproteinization (DP), Decolouration (DC) and Deacetylation (DA). In this study, this method was re-ordered, resulting to 4 sequences of chemical processes. HCl, NaOH, ethanol (97%) and NaOH (50%) were used for DM, DP, DC and DA respectively. The results of this study showed that better chitin (23.99 ± 0.61%) and chitosan (15.17 ± 1.69%) yields were obtained from sequence four (SQ4) following the order of DC-DM-DP-DA. In addition, physicochemical properties such as DDA (80.67 ± 2.52%) and solubility (66.43 ± 2.61%) were significantly higher (p ≤ 0.05) in SQ4 thereby making the obtained product suitable for use as coagulant and flocculant in wastewater treatment. Results of FTIR, XRD and SEM of the study proved that the resultant product exhibited the characteristic nature of chitosan with porous and fibril nature. In the analysis of the physical properties of chitosan obtained from bio-waste of Macrobrachium rosenbergii, the high Carr's index (CI) and low bulk as well as tapped densities were an indication that the chitosan produced in this study had poor flowability and compressibility, thereby making it unfit for application in pharmaceutical industries.

Response Surface Methodology (RSM) Approach to Optimization of Coagulation-Flocculation of Aquaculture Wastewater Treatment Using Chitosan from Carapace of Giant Freshwater Prawn Macrobrachium rosenbergii

The major sources of waste from aquaculture operations emanates from fish or shellfish processing and wastewater generation. A simple technique called coagulation/flocculation utilizes biowaste from aquaculture to produce chitosan coagulant for wastewater treatment. A chemical method was applied in the present study for chitin and chitosan extraction from carapace of Macrobrachium rosenbergii and subsequent application for removal of turbidity and salinity from shrimp aquaculture wastewater. Box-Behnken in RSM was used to determine the optimum operating conditions of chitosan dosage, pH, and settling time, after which quadratic models were developed and validated. Results show that 80 g of raw powder carapace yielded chitin and chitosan of 23.79% and 20.21%, respectively. The low moisture (0.38%) and ash (12.58%) content were an indication of good quality chitosan, while other properties such as water-binding capacity (WBC), fat-binding capacity (FBC), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM) confirmed the structure and the α-group, as well as the rough morphology of chitosan. In addition, the high solubility (71.23%) and DDA (85.20%) suggested good coagulant potentials. It was recorded in this study that 87.67% turbidity was successfully removed at 20 mg/L of chitosan dosage and 6.25 pH after 30 min settling time, while 21.43% salinity was removed at 5 mg/L of chitosan dosage, 7.5 pH, and 30 min settling time. Therefore, the process conditions adopted in this study yielded chitosan of good quality, suitable as biopolymer coagulant for aquaculture wastewater treatment.

Chemical modifications in the structure of marine polysaccharide as serviceable food processing and preservation assistant: A review

Marine polysaccharides are a kind of natural polysaccharides which isolated and extracted from marine organisms. Now some marine polysaccharides, such as chitosan, sodium alginate and agar, have been proven to exhibit antibacterial, antioxidant functions and biocompatibility, which are often used to preserve food or improve the physicochemical properties of food. However, they still have the defects of unsatisfactory preservation effect and biological activity, which can be remedied by its modification. Chemical modification is the most effective of all modification methods. The advances in common chemical modification methods of chitosan, sodium alginate, agar and other marine polysaccharides and research progress of modified products in food processing and preservation were summarized, and the influence of additional reaction conditions on the existence of chemical modification sites of polysaccharides was discussed. The modification of functional groups in natural marine polysaccharides leads to the change of molecular structure, which can improve the physical, chemical and biological properties of marine polysaccharides. Chemically modified products have been used in various fields of food applications, such as food preservatives, food additives, food packaging, and food processing aids. In general, chemical modification has excellent potential for food processing and preservation, which can improve the function of marine polysaccharides.